from

$147.99

NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. While conventional switching oxygen sensors only switch rich or lean, wideband oxygen (or Air-Fuel Ratio) sensors produce a linear output signal that allows the ECU determine exactly how rich or lean an engine is running and make continuous and precise adjustments of the air-fuel mixture to stay closest to stoichiometric, providing the best possible combustion and fewest emissions. A ceramics company at our core, NTK uses state-of-the art technology enabling complete control of the ceramics used in our wideband oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

from

$182.56

Bosch, Fuel Injector

from

$33.49

Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:

Come pre-assembled for quick and easy installation.
Several fastener options to work with any fuel cap compartment configuration
Fits vehicles orginally equipped with tether
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

from

$32.99

None

Product Features:

Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$99.96

Denso First Time Fit oxygen sensors are constructed of the highest quality materials available. High-quality stainless steel, porous polytetrafluoroethylene (PTFE), fluorine rubber, aluminum oxide, high-grade platinum and ceramics are used in each DENSO sensor.

Product Features:

SUPERIOR DESIGN – Maximizes engine performance and fuel efficiency while reducing harmful emissions.
DOUBLE-PROTECTION COVER – Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
ALUMINUM-OXIDE TRAP LAYER – Keeps silicone and lead outside the ceramic element through DENSO’s exclusive design, preventing damage to the platinum electrode.
STAINLESS STEEL HOUSING – Resists corrosion and contamination with a rugged, watertight body.

from

$176.99

DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity; DENSO gives you the right part and the right fit, the first time.

Product Features:

Specifically designed to meet the increasing demands of today’s engines
100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$54.99

Mr. Gasket’s high performance electric fuel pump is a direct bolt-on replacement for Holley Fuel Pump. Our products are 100 percent pressure tested for guaranteed performance and reliability. Features an in-line style rotor and vane pump design and 3/8 inch NPT inlet and outlet. This lightweight pump includes mounting bracket and hardware and is universal for all carbureted engines.

Product Features:

Solid-state worry free electronics
Internal pressure regulating
Universal design allows for easy installation
No diaphragms or mechanical parts to wear out
They make an excellent fuel transfer pump

from

$161.99

CARQUEST enhanced electric in-tank fuel pumps are 100% quality tested and are designed to deliver quiet operation, industry-leading performance and durability. All CARQUEST pumps meet or exceed OE specifications in fit, form and function.

Product Features:

Every single pump is 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performance
Advanced polymers, brushes and commutators to ensure long life and durability in multiple fuel blends
High-performance pump section assembly provides superior performance
Leading-edge inlet design to increase performance and efficiency, leading to longer life
High grade outer shell for life-long corrosion resistance
Optimized, precision-wound armature assembly for increased performance

from

$178.48

MAP Sensor

from

$153.99

CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:

CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.

from

$32.49

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

from

$131.16

The Bosch Fuel Vapor Leak Detection Pump ascertains leaks or related problems in the fuel system. A functional Vapor Leak Detection Pump is necessary in states that require an Emissions Inspection.

Product Features:

Helps to reduce atmospheric pollution due to hydrocarbon emissions
Direct replacement for a proper fit every time
Durable against salt, debris, and other harsh undercar conditions
On-vehicle and laboratory testing has been conducted on this part to ensure a trouble-free performance

from

$176.07

All Bosch High Pressure Sensors provide very reliable and accurate measurements and have extremely fast response times to ensure your vehicle runs as intended.

Product Features:

Built-in circuit protection to ensure your electronics and computer systems stay unharmed
High reliability of pressure sensing proved in gasoline and diesel direct injection systems
Sturdy design, vibration resistant and thermal stability

from

$194.99

Bosch OE quality pressure sensors for accurate measurements with high durability, fast response time and wide measuring range

Product Features:

Bosch OE quality pressure sensors for accurate measurements
Bosch OE quality pressure sensors for long term stability
Bosch OE quality pressure sensors with a short response time
Bosch OE quality pressure sensors with improved media resistance

from

$27.40

FI Throttle Body Mou

from

$288.41

Direct Injection Fue

from

$13.72

Fuel Injector Seal K

from

$12.49

To perform a complete fuel pump replacement, clean the tank every time. Order the Delphi Fuel Tank Cleaning Kit (Part FC01). Remember, the original pump went into a clean fuel tank, to ensure the same level of performance, the new pump should too. 100 ye

Product Features:

Helps avoid premature fuel pump failure
Lint free towel included
Low suds formulation
Removes harmful contaminants from the fuel tank

from

$316.37

Denso manufactures an air mass sensor that is engineered to exact OEM specifications for quality, fit and performance. The Denso Air Mass Sensor provides exceptional reliability by incorporating a platinum coated sensing element with a glass film to protect the sensor from contaminants. Denso prevents errors caused by air pulsations produced in the intake air pipe by integrating the control circuit within the top of the air flow sensor so that only the small bypass passage structure with the sensing element is inserted into the intake air pipe, resulting in higher detection accuracy and performance.

Product Features:

OEM Quality Direct fit Application
Platinum coated sensing element
Meets or exceeds OEM specifications
Utilizes the factory style mounts, connectors and fittings
Provides exceptional reliability

from

$97.99

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium mass air flow sensors meet or exceed the performance of the original equipment they replace.

Product Features:

Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE engine management systems design expertise
Platinum connector threads reduce the number of connection points for faster reaction to change
Ceramic-built printed circuit boards are protected by silica gel, providing superior resistance to temperature changes and vehicle vibrations
Ceramic board provides reliable voltage to eliminate engine rough-idle problems
Each new sensor is road tested to ensure real world performance and to verify that each design meets our high standards for quality
Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed

from

$293.99

Bosch air mass sensors are built to exacting specifications as required for such a sensitive measuring device. Through a precise manufacturing process, the correct type and thickness of platinum wire or thick film ceramic measuring elements are selected and accurately calibrated to provide optimum performance.

Product Features:

OEM Quality Direct fit Application
Measurement of air mass (gas mass) through-flow per unit of time, independent of density and temperature
Extensive measuring range
Highly sensitive, particularly for small changes in flow rate
Wear-free since there are no moving parts
Insensitive to dirt and contamination
Utilizes the factory style mounts, connectors and fittings
Provides exceptional reliability

from

$305.99

CARDONE Remanufactured Mass Air Flow Sensors (MAFS) precisely track O.E. output curves and maintain specific tolerances to ensure accurate scan tool readings for proper operation. 100% re-soldering of critical components ensures superior electrical connections, eliminates intermittent failures and lengthens product life. With CARDONE Mass Air Flow Sensors (MAFS), you can expect smooth vehicle performance.

Product Features:

100% re-solder of critical components ensures superior electrical connections, no intermittent failures and longer product life.
On-car vehicle validation routines ensure that modules meet all form, fit, durability and performance requirements.
All modules are 100% tested with automated computer test equipment to ensure full functionality and reliability.
Our sensors precisely track O.E. output curves and maintain spec tolerances to ensure accurate feedback to the vehicle’s engine control management system.
Components are rated to handle demanding temperature variations for optimum reliability in every environment.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.