2010 Infiniti M45 Motor Oil

Essential 2010 Infiniti M45 Motor Oil

Castrol – EDGE Euro 5W-30 A3/B4 Advanced Full Synthetic Motor Oil, 1 Quart (Part No.15484E)

EDGE Euro 5W-30 A3/B4 Advanced Full Synthetic Motor Oil, 1 Quart

from

$12.49
Castrol EDGE Euro 5W-30 A3/B4 is an advanced full synthetic motor oil engineered to exceed manufacturer test limits ensuring the highest level of protection and maximum performance for European cars. European car manufacturers create unique motor oil specifications to ensure the lubricant can withstand the intense pressure, heat and friction generated in a high output engine. To ensure compliance, rigorous engine tests are developed, with approval granted only when the oil achieves the minimum values required in each test. Castrol EDGE Euro Car fluids are formulated to exceed these requirements and deliver maximum protection and performance.

Product Features:
  • 1.2X Better viscosity control to help engines run better for longer (1)
  • 2X Better engine cleanliness to help maximize engine performance (2)
  • (1) As measured in DV6 test vs. test limit
  • (2) As measured in OM646LA test vs. test limit
  • Approved and licensed specifications:
  • ACEA A3/B4
  • API SL
  • Meets Ford WSS-M2C946-B1
  • BMW Longlife-01
  • MB-Approval 229.5
  • VW 502 00 / 505 00
See More

LIQUI MOLY – TopTec 4200 Long Life 5W-30 Full Synthetic Motor Oil: Long Life, Reduces Build Up, 5 Liter (Part No.2011)

TopTec 4200 Long Life 5W-30 Full Synthetic Motor Oil: Long Life, Reduces Build Up, 5 Liter

from

$56.99
High-tech low-friction motor oil based on synthetic technology. Ensures excellent engine cleanliness and exceeds even the strictest test requirements of well-known vehicle manufacturers. Reduces the build-up of troublesome deposits in direct-injection gasoline and diesel engines (FSI, TDI, common rail, etc.) and keeps oil consumption low. Assures reliable operation and maximizes the operating life of the diesel particulate filter (DPF). Specifically for vehicles with extremely long oil change intervals (WIV, etc.). Outstanding protection against wear, reduces oil and fuel consumption and ensures fast oil penetration of the engine.

Product Features:
  • Outstanding protection against wear
  • Reduces oil and fuel consumption
  • Ensure fast oil penetration of the engine
  • High tech low friction based on synthetic technology
  • Made in Germany
  • Reduces Deposits: Effectively reduces the build-up of troublesome deposits in direct-injection gasoline and diesel engines (FSI, TDI, common rail, etc.), maintaining optimal engine performance.
  • Extended Oil Change Intervals: Specifically designed for vehicles with extremely long oil change intervals (WIV, etc.), making it a cost-effective and convenient choice for long-term use.
  • Maximizes DPF Life: Assures reliable operation and maximizes the operating life of the diesel particulate filter (DPF), contributing to lower maintenance costs and enhanced vehicle longevity.
See More

Castrol – GTX 10W-30 Conventional Motor Oil, 5 Quarts (Part No.15B7AA)

GTX 10W-30 Conventional Motor Oil, 5 Quarts

from

$29.99
Castrol GTX 10W-30 is a premium conventional motor oil that has been helping to extend engine life for over 50 years. It is specially engineered to prevent harmful build-up of sludge while protecting against new oil splatter formation better than tough industry standards. Sludge is a thick, tar like substance caused by severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals. Sludge can block your engine’s vital oilways like cholesterol and if untreated, can rob an engine of its power and ultimately its life.

Product Features:
  • Advanced protection against viscosity and thermal breakdown
  • Superior protection against engine sludge
  • Premium quality base oils and anti-wear additives to help extend the life of your engine
  • Helps minimize oil consumption
  • Meets or exceeds the following specifications:
  • API SP/SN PLUS/SN/SM
  • ILSAC GF-6
  • Meets Ford WSS-M2C961-A1
See More

LIQUI MOLY – HighTech Full Synthetic 5W-40 Engine Oil: Gas & Diesel, Reduces Oil And Fuel Consumption, 5 Liter (Part No.2332)

HighTech Full Synthetic 5W-40 Engine Oil: Gas & Diesel, Reduces Oil And Fuel Consumption, 5 Liter

from

$49.99
Liqui Moly’s Leichtlauf High Tech 5W-40 is a fully synthetic, premium low-friction engine oil for all-season use in gasoline and diesel engines without diesel particulate filters (DPF). The combination of innovative base oils – based on synthesis technology and the latest additive technology – guarantees an engine oil that reduces oil and fuel consumption and that ensures fast lubrication of the engine. Depending on the manufacturer instructions, oil change intervals of up to 40,000 km are possible. Ideally suited for modern gasoline and diesel engines with multi-valve technology, turbocharger and with or without charge air cooling. Especially suitable where there are long intervals between changes and heavy duty engine requirements.

Product Features:
  • All season use reliable at high and low temperatures
  • Suited for modern gasoline and diesel engines with multivalve technology, turbocharger and with or without charge air cooling
  • An engine oil that reduces oil and fuel consumption
  • Ensures fast lubrication of the engine
  • Made in germany
  • Low-friction formula: Leichtlauf LIQUI-MOLY Synthetic Engine Oil 5W-40 is a premium, fully synthetic engine oil that reduces oil and fuel consumption, thanks to its low-friction formula.
See More

FRAM – 5W-30 Conventional Motor Oil with Low-Speed Pre-Ignition Control, 1 Quart (Part No.F620)

5W-30 Conventional Motor Oil with Low-Speed Pre-Ignition Control, 1 Quart

from

$6.49
FRAM Engine Oil SAE 5W-30 utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 5W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:
  • Low-speed pre-ignition control
  • Chain wear protection
  • Piston cleanliness
  • Turbo-compatibility
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
  • Reliable engine protection: FRAM Conventional Oil 5W30 1 QT utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions.
See More

FRAM – 5 Qt Conventional 5W30 Engine Oil with Low-Speed Pre-Ignition Control (Part No.F620-5QT)

5 Qt Conventional 5W30 Engine Oil with Low-Speed Pre-Ignition Control

from

$25.99
FRAM Engine Oil SAE 5W-30 utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 5W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:
  • Low-speed pre-ignition control
  • Chain wear protection
  • Piston cleanliness
  • Turbo-compatibility
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
  • Reliable engine protection: FRAM Conventional Oil 5W30 5 QT utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions.
See More

FRAM – 10W-30 Full Synthetic Motor Oil, Ultimate Protection, 5 Quarts (Part No.F940-5QT)

10W-30 Full Synthetic Motor Oil, Ultimate Protection, 5 Quarts

from

$27.99
FRAM Engine Oil Full Synthetic SAE 10W-30 is a full synthetic motor oil blended with high  quality synthetic base stocks and the latest additive technology to provide the ultimate protection  for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI)  and turbo gas-direct engine (TGDI) designs as well as providing increased protection for  carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 10W-30  contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead  to pre-mature engine failure and is a major concern of the automotive industry for vehicles  employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation  and shear stability over previous oil categories.

Product Features:
  • Outstanding thermal and oxidation stability
  • Excellent sludge and varnish protection
  • Faster oil flow at start-up
  • Volatility: Lowers oil vaporization and consumption at extreme conditions
  • ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
  • Ultimate Engine Protection: FRAM Engine Oil Full Synthetic SAE 10W-30 is formulated with high-quality synthetic base stocks and the latest additive technology to provide the ultimate protection for your engine.
  • Advanced LSPI Prevention: Contains additive technology specifically designed to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct injection (GDI) and turbo gas-direct injection (TGDI) engines.
  • Enhanced Wear Protection: Offers increased wear protection, ensuring your engine components remain in optimal condition even under rigorous driving conditions.
  • Versatile Engine Compatibility: Suitable for a wide range of engines, including GDI, TGDI, carbureted, and normally fuel-injected engines, making it a versatile choice for various vehicle types.
See More

Valvoline – High Mileage with MaxLife Technology Synthetic Blend 10W-30 Engine Oil: Maximize Engine Life, 5 Quart (Part No.881161)

High Mileage with MaxLife Technology Synthetic Blend 10W-30 Engine Oil: Maximize Engine Life, 5 Quart

from

$29.99
75,000 miles is more than a mile marker. It’s a signal that your engine is ready for greater protection. That’s when you need Valvoline High Mileage with MaxLife Technology Motor Oil. Its exclusive formula is proven to maximize engine life in cars, trucks, and SUVs with over 75,000 miles. Our mixture is specially developed with a unique combination of synthetic and premium conventional oils to protect your high-mileage motor against wear, friction, heat, and deposits – the four major causes of engine breakdown and expensive repairs. Anti-wear additives defend critical engine components, advanced friction-fighting agents reduce heat and abrasion, added detergents clean the inside of your engine, and premium seal conditioners handle aging seals to prevent leaks. It fights sludge, corrosion and rust that can rob your engine of horsepower, fuel efficiency and longevity. From extreme temperatures and cold starts to stop-and-go traffic and frequent short trips, viscosity modifiers make sure the oil flows more easily, coats more completely, and resists thermal breakdown under even the most intense driving conditions. Its unique mixture curbs contaminants to keep high-mileage engines from burning and consuming oil that can foul spark plugs, creating higher emissions and causing your motor to run roughly.

Product Features:
  • Maxlife technology prevents engine breakdown with 40% better wear protection than the industry standard
  • Refresh aging seals and prevent leaks with seal conditioners
  • Reduce sludge, deposits, corrosion, and rust with added detergents – keep motors clean inside
  • Enhanced friction performance helps maximize power with advanced friction-fighting agents
  • Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn
  • MaxLife Technology: The exclusive formula of Valvoline High Mileage with MaxLife Technology Engine Oil is proven to maximize engine life in cars, trucks, and SUVs with over 75,000 miles.
See More

Mobil Super – 10W-30 Synthetic Blend Motor Oil, 5 Quart (Part No.98008)

10W-30 Synthetic Blend Motor Oil, 5 Quart

from

$25.99
Mobil Super 10W-30 Synthetic Blend motor oil helps to extend your engine life and provide engine protection up to 5,000 miles for gasoline cars and light-duty trucks. Mobil Super has 15 percent extra cleaning additives to help prevent the formation of sludge and deposits when compared to Mobil conventional motor oil. Helps to get your engine cleaner, conserve viscosity for easier cold starting, and provide outstanding engine wear protection under a variety of operating conditions. Meets or exceeds the requirements of: API SN, SM, SL, API SN Plus.

Product Features:
  • Mobil Super Synthetic Blend motor oil 10W-30 works to protect your engine from sludge and deposits for up to 5,000 miles
  • Helps to keep your engine clean with 15 percent extra cleaning additives, preventing sludge and deposit formation
  • Works to provide outstanding engine wear protection under a variety of operating conditions
  • Enhanced formulation (vs. Mobil basic conventional oil) helps to conserves oil viscosity for easier cold starting
  • Recommended for gasoline cars and light-duty trucks
See More

FRAM – Full Synthetic High Mileage 5W-30 Motor Oil: 1 Quart (Part No.F933)

Full Synthetic High Mileage 5W-30 Motor Oil: 1 Quart

from

$7.99
FRAM Full Synthetic High Mileage SAE 5W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 5W-30 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 5W-30 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories.

Product Features:
  • Faster oil flow at start-up
  • Fuel efficiency gains over heavier grade oils
  • Reduces oil cumsumption
  • Excellent sludge and varnish protection
  • Slows engine leaks
  • Outstanding thermal and oxidation stability
  • Lowers oil vaporization and consumption at extreme conditions
  • ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
  • Engine Cleaning and Efficiency: Helps clean out sludge buildup, keeping engines running clean with increased efficiency and power, ideal for engines with over 75,000 miles.
  • Advanced LSPI Prevention: Contains additive technology designed to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct injection (GDI) and turbo gas-direct injection (TGDI) engines.
  • Comprehensive Engine Protection: Provides increased wear protection, oxidation, and shear stability for higher mileage vehicles, meeting stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications.
See More

Mobil 1 – Extended Performance 5W-30 High Mileage Full Synthetic Motor Oil, 5 Quart (Part No.15021)

Extended Performance 5W-30 High Mileage Full Synthetic Motor Oil, 5 Quart

from

$41.99
You trust your car to keep you going, even after 75,000 miles. Mobil 1 Extended Performance High Mileage full-synthetic motor oil 5W-30 gives engines with over 75,000 miles the extra care they need to go the distance. Formulated to help prevent leaks, it helps to protect critical engine parts for up to 20,000 miles between oil changes, guaranteed.(1) Utilizes Mobil 1’s Triple Action+ Formula to combine outstanding engine performance, protection, and cleanliness with the added benefit of maximized engine power. This cutting-edge formula is recommended by ExxonMobil for all types of modern vehicles, including high-performance, turbo-charged, and supercharged gasoline and diesel multi-valve fuel-injected engines found in passenger cars, SUVs, light vans, and light trucks. Mobil 1 is America’s No. 1 synthetic motor oil brand at retail,(2) trusted and recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR. ((1)Protects for up to 20,000 miles or 1 year, whichever comes first. To learn more about the Mobil 1 Limited Warranty, visit Mobil.US. (2)Source: The NPD Group/Retail Tracking Service/Dollar Sales/PCMO full-synthetic/52 weeks ending July 1, 2023)

Product Features:
  • Mobil 1 Extended Performance High Mileage full-synthetic motor oil 5W-30 is designed for engines with over 75,000 miles to go up to 20,000 miles between oil changes.(1)
  • Utilizes Mobil 1’s Triple Action+ Formula to combine outstanding engine performance, protection, and cleanliness with the added benefit of power
  • Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
  • Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -40 degrees F)
  • Helps extend engine life by working to prevent damaging deposits and sludge buildup
  • Manufacturer Part Number: 123843
  • Versatile Compatibility: Recommended for all types of modern vehicles, including high-performance, turbo-charged, and supercharged gasoline and diesel multi-valve fuel-injected engines found in passenger cars, SUVs, light vans, and light trucks.
  • Trusted Brand: Mobil 1 is America’s No. 1 synthetic motor oil brand at retail, trusted and recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR«.
  • Trusted Brand: Mobil 1 is America’s No. 1 synthetic motor oil brand at retail, trusted and recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR®.
See More

FRAM – 10W40 Conventional Motor Oil, with Low-Speed Pre-Ignition Control, 1 Quart (Part No.F640)

10W40 Conventional Motor Oil, with Low-Speed Pre-Ignition Control, 1 Quart

from

$6.49
FRAM Engine Oil SAE 10W-40 engine oil utilizes high-quality base stocks and a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 10W-40 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. The FRAM Engine Oil SAE 10W-40 meets the requirements for API SP, SN Plus, SN, SM and earlier API Service Categories.

Product Features:
  • Low-speed pre-ignition control
  • Chain wear protection
  • Piston cleanliness
  • Turbo-compatibility
  • Low-speed pre-ignition control
  • Chain wear protection
  • Piston cleanliness
  • Turbo-compatibility
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
See More

Castrol – GTX 5W-30 Synthetic Blend Motor Oil, 5 Quart (Part No.15A66D)

GTX  5W-30 Synthetic Blend Motor Oil, 5 Quart

from

$29.99
Castrol GTX 5W-30 is a synthetic blend motor oil with a double-action formula proven to clean away the sludge that can block engine oilways (1) and help prevent new sludge formation. Sludge is a thick, tar like substance caused by severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals. Sludge can block your engine’s vital oilways like cholesterol and if untreated, can rob an engine of its power and ultimately its life. (1) When tested in engines with a high level of sludge.

Product Features:
  • Premium-quality base oils and anti-wear additives that help extend engine life
  • Superior protection against engine sludge
  • Advanced protection against viscosity and thermal breakdown
  • Superior protection against high-temperature deposits
  • Meets or exceeds the following specifications:
  • API SP/SN PLUS/SN/SM
  • ILSAC GF-6
  • ILSAC GF-6
  • Meets Ford WSS-M2C946-B1
See More

Castrol – EDGE Euro 5W-30 K Advanced Full Synthetic Motor Oil, 1 Quart (Part No.15E892)

EDGE Euro 5W-30 K Advanced Full Synthetic Motor Oil, 1 Quart

from

$11.49
Castrol EDGE Euro 5W-30 K is an advanced full synthetic motor oil engineered to exceed manufacturer test limits ensuring the highest level of protection and maximum performance for European cars. European car manufacturers create unique motor oil specifications to ensure the lubricant can withstand the intense pressure, heat and friction generated in a high output engine. To ensure compliance, rigorous engine tests are developed, with approval granted only when the oil achieves the minimum values required in each test. Castrol EDGE Euro Car fluids are formulated to exceed these requirements and deliver maximum protection and performance.

Product Features:
  • 3X Better wear protection to reduce friction and optimize performance (1)
  • 1.9X Better engine cleanliness to help maximize engine performance (1)
  • (1) As measured in OM646LA test vs. test limit
  • Approved and licensed specifications:
  • ACEA C3
  • API SP
  • BMW Longlife-04
  • Meets Ford WSS-M2C947-B1
  • MB-Approval 229.31/ 229.51/ 229.52
  • Porsche C30
  • Renault RN 0700 / RN 0710
See More

Pennzoil – Ultra Platinum 5W-30 Full Synthetic Motor Oil, Extends Engine Life, 5 Quart (Part No.550045201)

Ultra Platinum 5W-30 Full Synthetic Motor Oil, Extends Engine Life, 5 Quart

from

$41.99
Pennzoil Ultra Platinum Full Synthetic motor oil is made from natural gas, not crude. It is one of the best full synthetic motor oils in our portfolio. Made for extreme performance, Pennzoil Ultra Platinum outperforms conventional oils in terms of low temperature performance and volatility control. Our full synthetic motor oils are uniquely engineered from our revolutionary PurePlus Technology which is a patented process that converts pure natural gas into a high quality, full synthetic base oil. Because it is made from natural gas, the high- quality base oil contains fewer impurities than base oils made from crude oil, and when combined with our advanced additive technology creates one of the best formulations in our Pennzoil portfolio. Pennzoil Ultra Platinum far exceeds the most stringent car manufacturer requirements for cleanliness and protection (based on ILSAC GF-6, dexos1 and Ferrari approvals), and is suitable for all car, SUV, light van, truck gasoline and turbocharged engines; under all driving conditions.

Product Features:
  • Full synthetic 5W-30 engine oil made from natural gas, not crude, using Pennzoil’s patented gas-to-liquid PurePlus Technology
  • No other leading motor oil provides better wear protection for your engine (Based on Sequence IVA wear test using SAE 5W-30)
  • Helps protect engines from loss of power and provides better fuel economy-drive on average an extra 550 miles per year (versus a dirty engine)
  • Keeps pistons dramatically cleaner than required by the toughest industry standards (Based on ILSAC GF-6 and Sequence IIIH piston deposit test using SAE 5W-30)
  • Delivers unsurpassed sludge protection to help keep high-performance and luxury car engines as close as possible to factory clean (Based on Sequence VH Sludge Test using SAE 5W-20)
  • Formulated to provide faster low-temperature oil flow and protection in extreme heat
  • Pennzoil is the first motor oil made from natural gas, not crude- PurePlus Technology converts pure natural gas into high-quality, full-synthetic base oil that’s crystal clear and contains fewer impurities than other traditional and synthetic motor oils
  • Suitable for all car, SUV, light van, truck gasoline and turbocharged engines; under all driving conditions.
  • Extreme Performance: Designed for extreme performance, this motor oil outperforms conventional oils in low temperature performance and volatility control, ensuring optimal engine protection and efficiency.
  • Exceeds Stringent Requirements: Pennzoil Ultra Platinum exceeds the most stringent car manufacturer requirements for cleanliness and protection, meeting ILSAC GF-6, dexos1, and Ferrari approvals.
  • Extends Engine Life: The advanced additive technology combined with the high-quality base oil helps extend engine life, providing superior protection and performance.
See More

Castrol – EDGE 5W-30 Advanced Full Synthetic Engine Oil, 5 Quart (Part No.1598B1)

EDGE 5W-30 Advanced Full Synthetic Engine Oil, 5 Quart

from

$37.99
Castrol EDGE 5W-30 is an advanced full synthetic motor oil and the optimal choice for drivers who want the best combination of wear protection, viscosity control and thermal stability to maximize engine performance. It is one of Castrols strongest engine oils with the strength to maintain this unsurpassed level of engine protection for up to 20,000 miles between oil changes or one year.

Product Features:
  • 3X Stronger than the leading full synthetic (1)
  • 10X Better high stress performance (2)
  • 20,000 miles between oil changes (3)
  • (1) Viscosity breakdown as measured in Kurt Orbahn test on 5W-30 grade
  • (2) As measured in Seq IX test under high load/torque conditions vs. API SP test limits
  • (3) Or one year, whichever comes first
  • Approved and Licensed Specifications:
  • ILSAC GF-6
  • Exceeds API SP/SN PLUS/SN/SM
  • GM dexos1 Gen 3
  • Meets engine test requirements of Chrysler MS 6395
  • Meets Ford WSS-M2C946-B1
  • Meets Ford WSS-M2C961-A1
See More

FRAM – 10W-30 High Mileage Conventional Motor Oil, Reduces Oil Consumption, 5 Quart (Part No.F665-5QT)

10W-30 High Mileage Conventional Motor Oil, Reduces Oil Consumption, 5 Quart

from

$25.99
FRAM Conventional High Mileage 10W30 Engine Oil is specially designed with enhanced  additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with  increased efficiency and power. They are specially designed for engines with over 75,000 miles. FRAM Conventional High Mileage 10W30 Engine Oil will protect domestic and imported vehicles and equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed  all new car manufacturers’ warranty requirements as well as the stringent industry standards API  SP/CF, and 10W30 grade will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.

Product Features:
  • Formulated with a unique combination of premium base oils and an enhanced additive system
  • Provides increased protection in higher mileage engines
  • Helps restore seal condition to reduce oil consumption
  • Increases protection against high temperature deposits and ring sticking
  • ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
  • Sludge Cleanup and Engine Efficiency: Formulated to help clean out sludge buildup, keeping engines running clean with increased efficiency and power.
  • Versatile Compatibility: Protects domestic and imported vehicles and equipment powered by gasoline or light-duty diesel engines, including turbocharged and supercharged engines.
  • Meets Stringent Standards: Formulated to meet or exceed all new car manufacturers’ warranty requirements and stringent industry standards API SP/CF, and ILSAC GF-6A Resource Conserving Service Category.
See More

FRAM – Conventional 10W30 Engine Oil with Low-Speed Pre-Ignition Control – 5 Qt (Part No.F630-5QT)

Conventional 10W30 Engine Oil with Low-Speed Pre-Ignition Control - 5 Qt

from

$25.99
FRAM Engine Oil SAE 10W-30 utilizes a blend of high-quality conventional base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 10W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:
  • Low-speed pre-ignition control
  • Chain wear protection
  • Piston cleanliness
  • Turbo-compatibility
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
  • Suitable for modern engines: Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs.
See More

Castrol – 5W-30 Full Synthetic Motor Oil, Helps Maximize Motor Performance, 1 Quart (Part No.15D452)

5W-30 Full Synthetic Motor Oil, Helps Maximize Motor Performance, 1 Quart

from

$11.99
Castrol Full Synthetic 5W-30 Engine Oil is expertly formulated for highly tuned four-cylinder and latest technology engines that operate at higher temperatures. This full synthetic oil, classified as standard with an SAE oil weight of 5W-30, ensures exceptional lubrication for all engine components, from the valve train to the bearings, providing the strength needed for maximum engine performance.

Product Features:
  • Expertly formulated for highly tuned four-cylinder and latest technology engines that operate at higher temperatures.
  • Full synthetic composition ensures exceptional lubrication for all engine components, from the valve train to the bearings.
  • Classified as standard with an SAE oil weight of 5W-30, providing the strength needed for maximum engine performance.
  • Helps maximize engine performance by maintaining optimal lubrication under high-temperature conditions.
  • Comes in a convenient 1 QT size, perfect for top-offs or completing oil changes.
See More

Pennzoil – Full Synthetic Engine Oil 5W-30 1 Qt – Helps Prevent Sludge and Deposit Build Up (Part No.550058600)

Full Synthetic Engine Oil 5W-30 1 Qt - Helps Prevent Sludge and Deposit Build Up

from

$9.49
Pennzoil Full Synthetic 5W-30 motor oil is formulated to provide 40% better performance than conventional motor oil (compared to Pennzoil Conventional motor oil), and helps prevent sludge and deposit build up. Pennzoil Full Synthetic Motor oil is formulated to help you go longer between oil changes- it is formulated for longer drain intervals than conventional and synthetic blend motor oils. Pennzoil utilizes the advances of synthetic technology to provide improved cleanliness over synthetic blend motor oils. It meets or exceeds the engine protection required by ILSAC GF-6. So if your car already requires full synthetic, or if you’re looking to upgrade from conventional or synthetic blend Pennzoil Full Synthetic is the right choice for you.

Product Features:
  • Fewer oil changes compared to conventional engine oil
  • Enhanced wear protection in high and low temperatures
  • Excellent resistance to oil breakdown in severe environments
  • Formulated for longer drain intervals than conventional and synthetic blend engine oils
  • Suitable for use in new and old engines
  • Meets or exceeds: api sp- resource conserving and all previous categories, ilsac gf-6
  • Specs and approvals: chrysler ms 6395 and ford wss-m2c947-a
See More

FRAM – Full Synthetic 10W-30 Motor Oil – Helps Extend Motor Life, 1 Quart (Part No.F940)

Full Synthetic 10W-30 Motor Oil - Helps Extend Motor Life, 1 Quart

from

$7.49
FRAM Engine Oil Full Synthetic SAE 10W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 10W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability over previous oil categories.

Product Features:
  • Outstanding thermal and oxidation stability
  • Excellent sludge and varnish protection
  • Faster oil flow at start-up
  • Volatility: lowers oil vaporization and consumption at extreme conditions
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
  • Ultimate engine protection: FRAM Full Synthetic Oil 10W30 1 QT is specifically formulated with high-quality synthetic base stocks and advanced additive technology to provide the ultimate protection for your engine, ensuring its longevity and performance.
See More

Pennzoil – 5W-30 Full Synthetic Motor Oil, Helps Prevent Sludge Build-Up, 5 Quart (Part No.550058602)

5W-30 Full Synthetic Motor Oil, Helps Prevent Sludge Build-Up, 5 Quart

from

$32.99
Pennzoil Full Synthetic 5W-30 motor oil is formulated to provide 40% better performance than conventional motor oil (compared to Pennzoil Conventional motor oil), and helps prevent sludge and deposit build up. Pennzoil® Full Synthetic Motor oil is formulated to help you go longer between oil changes- it is formulated for longer drain intervals than conventional and synthetic blend motor oils. Pennzoil utilizes the advances of synthetic technology to provide improved cleanliness over synthetic blend motor oils. It meets or exceeds the engine protection required by ILSAC GF-6. So if your car already requires full synthetic, or if you’re looking to upgrade from conventional or synthetic blend Pennzoil Full Synthetic is the right choice for you.

Product Features:
  • Fewer oil changes compared to conventional motor oil
  • Enhanced wear protection in high and low temperatures
  • Excellent resistance to oil breakdown in severe environments
  • Formulated for longer drain intervals than conventional and synthetic blend motor oils
  • Suitable for use in new and old engines
  • Meets or exceeds: API SP- Resource Conserving and all previous Categories, ILSAC GF-6
  • Specs and Approvals: Chrysler MS 6395 and Ford WSS-M2C947-A
  • Superior Performance: Pennzoil Full Synthetic 5W-30 motor oil delivers 40% better performance compared to conventional motor oil, ensuring optimal engine efficiency.
  • Enhanced Engine Cleanliness: Utilizing advanced synthetic technology, Pennzoil Full Synthetic motor oil provides improved cleanliness over synthetic blend motor oils, helping to prevent sludge and deposit build-up.
  • Versatile Upgrade: Ideal for vehicles that require full synthetic oil or for those looking to upgrade from conventional or synthetic blend oils, Pennzoil Full Synthetic 5W-30 is the right choice for enhanced engine performance.
See More

Royal Purple – HMX SAE 5W-30 High-Mileage Synthetic Motor Oil (5 Quart) (Part No.11748)

HMX SAE 5W-30 High-Mileage Synthetic Motor Oil (5 Quart)

from

$66.99
Royal Purple HMX SAE 5W-30 High-Mileage Synthetic Motor Oil, 5 quart is specifically designed to minimize wear and restore lost performance in engines with more than 75,000 miles. Formulated with robust zinc/phosphorus anti-wear compounds combined with Royal Purple’s proprietary additive technology Synerlec, HMX is chemically enhanced to revitalize hardened seals, reducing oil consumption common in high-mileage engines. In addition, HMX is fortified with stout detergents to remove engine build-up and deposits, maintain cleanliness and promote engine longevity. 

Product Features:
  • Specifically designed to minimize wear and restore lost performance in engines with more than 75,000 miles
  • Formulated with robust zinc/phosphorus anti-wear compounds combined with Royal Purple’s proprietary additive technology
  • HMX is chemically enhanced to revitalize hardened seals, reducing oil consumption common in high-mileage engines
  • Reduces friction and metal-to-metal contact for peak engine performance
  • Also provides outstanding oxidation resistance to safely extend oil drain intervals, and an ionic attraction to metal surfaces, providing protection and minimizing wear at start-up
See More

FRAM – Full Synthetic High Mileage 10W-30 Motor Oil: 5 Quart (Part No.F943-5QT)

Full Synthetic High Mileage 10W-30 Motor Oil: 5 Quart

from

$28.99
FRAM Full Synthetic High Mileage SAE 10W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 10W-30 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 10W-30 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 10W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories.

Product Features:
  • Faster oil flow at start-up
  • Fuel efficiency gains over heavier grade oils
  • Reduces oil cumsumption
  • Excellent sludge and varnish protection
  • Slows engine leaks
  • Outstanding thermal and oxidation stability
  • Lowers oil vaporization and consumption at extreme conditions
  • ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
  • Engine Cleaning and Efficiency: Helps clean out sludge buildup, keeping engines running clean with increased efficiency and power, ideal for engines with over 75,000 miles.
  • Advanced LSPI Prevention: Contains additive technology designed to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs.
  • Comprehensive Engine Protection: Provides increased wear protection, oxidation, and shear stability for higher mileage vehicles, meeting stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications.
See More

Castrol – EDGE High Mileage 5W-30 Advanced Full Synthetic Motor Oil, 1 Quart (Part No.15979F)

EDGE High Mileage 5W-30 Advanced Full Synthetic Motor Oil, 1 Quart

from

$12.99
Castrol EDGE High Mileage 5W-30 is an advanced full synthetic motor oil that is specifically designed for vehicles with over 75,000 miles. It’s been engineered to reduce leaks, burnoff and power robbing deposits, but also contains a proprietary additive to protect the emission system. Our Phosphorus Replacement Technology reduces harmful phosphorus to protect the catalytic converter and extend maximum performance. It is the natural choice for drivers who demand maximum performance from their high mileage car.

Product Features:
  • Phosphorus Replacement Technology to help extend the life of the emission system
  • Reduces leaks, oil burnoff and power robbing deposits
  • 15,000 miles between oil changes (1)
  • (1) Or one year, whichever comes first
  • Meets or exceeds the following specifications:
  • API SP/SN PLUS/SN/SM
  • ILSAC GF-6
  • Meets Ford WSS-M2C960-A1
  • Meets engine test requirements of Chrysler MS 6395
  • Meets Ford WSS-M2C946-B1
  • Meets Ford WSS-M2C961-A1
See More

FRAM – Full Synthetic High Mileage 5W-30 Engine Oil: 5 Quart (Part No.F933-5QT)

Full Synthetic High Mileage 5W-30 Engine Oil: 5 Quart

from

$28.99
FRAM Full Synthetic High Mileage SAE 5W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 5W-30 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 5W-30 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories.

Product Features:
  • Faster oil flow at start-up
  • Fuel efficiency gains over heavier grade oils
  • Reduces oil cumsumption
  • Excellent sludge and varnish protection
  • Slows engine leaks
  • Outstanding thermal and oxidation stability
  • Lowers oil vaporization and consumption at extreme conditions
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
See More

LIQUI MOLY – Longtime High Tech Full Synthetic 5W-30 Motor Oil: Wear Protection, Maximum Performance, 1 Liter (Part No.2038)

Longtime High Tech Full Synthetic 5W-30 Motor Oil: Wear Protection, Maximum Performance, 1 Liter

from

$17.99
Synthetic technology low-friction motor oil with the latest wear-protection technology and extremely high power reserve for maximum performance. Good dirt suspending and cleaning capacity ensures optimum engine cleanliness. Assures reliable operation and maximizes the operating life of the diesel particulate filter (DPF). Exceeds the highest test requirements of well-known vehicle manufacturers.An all-season oil for gasoline and diesel engines including common rail technology. Particularly suited for vehicles with a diesel particulate filter (DPF), also for retrofits.

Product Features:
  • Modern premium low friction motor oil
  • All season use reliable at high and low temperatures
  • Provides exceptional protection against wear
  • Reduces oil and fuel consumption
  • Ensures fast oil penetration of the engine
  • Made in Germany
See More

Valvoline – European Vehicle 5W-30 Full Synthetic Motor Oil, 5 Gallon (Part No.881058)

European Vehicle 5W-30 Full Synthetic Motor Oil, 5 Gallon

from

$154.99
Valvoline European Vehicle Full Synthetic motor oil is specially formulated to provide the ultimate protection for European gas and diesel engines. Through its advanced formulation, Valvoline European Vehicle Full Synthetic provides extra detergents and dispersants that provide maximum sludge and deposit protection, along with premium additives that hold up to high temperatures and resist motor oil breakdown under severe driving conditions. Approved/ Licensed for most European applications including VW, BMW, Mercedes-Benz, Audi and Porsche vehicles.

Product Features:
  • Full synthetic formula for exceptional high and low temperature protection
  • Extra wear protection designed to keep engine parts like new
  • Extra detergents fight sludge and deposits that reduce engine life
  • American Owned and Operated
See More

2010 Infiniti M45 Motor Oil

Maybe you’re in the middle of a full rebuild of that 2010 Infiniti M45. Maybe you just need a couple of Motor Oil. Either way, Advance Auto Parts has 31 different Motor Oil in our inventory ranging from $6.49 to $154.99. That means you can find the exact parts or products you need to keep that 2010 Infiniti M45 running smoothly.

Motor Oil are only as good as their brand. We stock 8 different brands to make sure you have plenty of trusted parts to choose from for your 2010 Infiniti M45. Mobil Oil, Castrol, and Fram are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Motor Oil for your 2010 Infiniti M45, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 16,686 reviews in this category, some of the top rated parts include Platinum 5W-30 Full Synthetic Motor Oil, 1 Quart with 4.8 stars and Extended Performance 5W-30 Full Synthetic Motor Oil, 5 Quart with 4.9 stars.

So if you’re in the market for aftermarket Motor Oil to keep your 2010 Infiniti M45 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Motor Oil Brands To Make Your 2010 Infiniti M45 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2010 Infiniti M45 demands trusted brand parts and products to keep it running. Many trusted brands of Motor Oil make up Advance Auto Parts’ inventory, and all are ready to help make your M45 the best it can be. Be sure to browse some of our top Motor Oil brands and parts.

FAQs for 2010 Infiniti M45 Motor Oil

What are the most purchased Motor Oil for the 2010 Infiniti M45?

Out of 31 Motor Oil for the 2010 Infiniti M45, the most popular in our inventory are:
5W-30 Full Synthetic Motor Oil: 5 Quart
from $27.99
This product is not rated
5W-30 Full Synthetic Motor Oil: 5 Quart
Engine Oil

What are the top-rated 2010 Infiniti M45 Motor Oil?

Top-rated Motor Oil for your 2010 Infiniti M45 based on customer reviews/ratings are:
Platinum 5W-30 Full Synthetic Motor Oil, 1 Quart
from $11.49
(2220)
Platinum 5W-30 Full Synthetic Motor Oil, 1 Quart
“Excellent”
EDGE 5W-30 Advanced Full Synthetic Motor Oil, 1 Quart
from $11.99
(442)
EDGE 5W-30 Advanced Full Synthetic Motor Oil, 1 Quart
“The best oil for my car.”