2010 Infiniti M45 Ignition and Tune-Up Products

Essential 2010 Infiniti M45 Ignition and Tune-Up Products

Carquest Premium – Coil On Plug Insulator Boot Multi Pack, Spring included (Part No.38-004NMP)

Coil On Plug Insulator Boot Multi Pack, Spring included

from

$35.99
CARQUEST Premium coil on plug boots are engineered to restore ignition boot reliability and performance. We have OE design providing an exact direct fit for your application and the performance and durability meet or exceed OE requirements. It offers excellent heat resistance as well as maximum protection against spark loss. With durable silicone compound for resistance to high heat or abrasion.

Product Features:
  • Provides excellent heat resistance as well as maximum protection against spark loss.
  • Durable silicone compound for resistance to high heat or abrasion
  • Spring included with the coil boot
  • Design for direct compatibility
  • OE design provides an exact fit for your application
  • Multipack provides one time replace all COP for better deal
See More

NGK – Coil on Plug Boot (Part No.58913)

Coil on Plug Boot

from

$36.99
NGK Coil on Plug Boots are built to stringent OEM tolerances, combining original equipment fit, design and outstanding durability. NGK Coil on Plug Boots are manufactured using only premium silicone and always include any required internal springs and ferrite resistors for superior performance and RFI noise suppression. Bridging the important link between ignition coil and spark plug, COP boots should always be replaced with NGK Coil on Plug Boots at the time as changing spark plugs to prevent ignition problems such as flashover.

Product Features:
  • PREMIUM GRADE SILICONE: Designed to withstand harsh environments
  • OEM MATCHED: Includes all required internal springs and ferrite resistors for superior performance and RFI noise suppression
See More

DENSO – Iridium TT Spark Plug: Ultimate Endurance and Power, 0.4mm Iridium Tip, last 100K+ Miles, IKH16TT (Part No.4703)

Iridium TT Spark Plug: Ultimate Endurance and Power, 0.4mm Iridium Tip, last 100K+ Miles, IKH16TT

from

$10.99
Durability of an OE style plug combined with Power & Torque of high performance.

Product Features:
  • 0.4mm Iridium Center Electrode: World’s Smallest Diameter that maximizes firing potential
  • 0.7mm Needle Tip Ground Electrode: Promotes higher spark energy and less heat quenching
  • DENSO Patented Optimized Iridium-Rhodium Alloy Formula: Highest concentration of Iridium vs. competitors for greater durability
  • DENSO Patented 360 degree laser welding process: Ensuring exceptional quality bond and structural strength with the Iridium Center Electrode
  • Durability of an OE style plug combined with Power & Torque of high performance.
  • Withstands temperatures greater than 4000┬░ Fahrenheit
  • Iridium TT
  • Ultimate Endurance and Power: The DENSO Iridium TT Spark Plug features a 0.7mm Iridium Tip, ensuring over 100,000 miles of uncompromised performance.
  • Advanced Twin-Tip Technology: Developed from Original Equipment Specification Super Ignition Plug (SIP) design, combining a Fine Wire Iridium Center Electrode with a Needle Tip Platinum Ground Electrode.
  • Enhanced Fuel Economy and Lower Emissions: Drive around the Earth over 4 times with improved fuel efficiency and reduced emissions.
  • Premium Materials: Features an Iridium Center Electrode Tip and a Flat Seat Type for optimal performance and durability.
See More

DENSO – U-Groove Spark Plug: OE Performance, lasts 30K+ Miles, K16HPR-U11 (Part No.6076)

U-Groove Spark Plug:  OE Performance, lasts 30K+ Miles, K16HPR-U11

from

$6.99
U-Groove design provides better ignitability for increased engine efficiency.

Product Features:
  • Patented U-groove ground electrode design fires leaner mixtures than conventional plugs
  • Precision machine-rolled threads reduce seizing and cross-threading in delicate aluminum heads
  • Wide range of part numbers for thousands of applications, including classic and collector cars
  • Lasts twice as long as most conventional plugs
  • 100% pre-fired to assure reliable operation
  • U-Groove Conventional
See More

DENSO – Platinum TT Spark Plug with Titanium Twin-Tip for Enhanced Ignition (Part No.4505)

Platinum TT Spark Plug with Titanium Twin-Tip for Enhanced Ignition

from

$5.99
This spark plug features a platinum twin-tip design and a titanium-enhanced ground strap, ensuring superior performance and longevity. The center electrode tip is made from platinum, providing excellent durability and consistent spark. Additionally, the flat seat type ensures a secure fit, making it an ideal choice for reliable and efficient ignition in your vehicle.

Product Features:
  • Platinum Twin-Tip Design: The Denso Platinum TT Spark Plug features a platinum twin-tip design, ensuring superior ignition performance and longevity.
  • Titanium-Enhanced Ground Strap: Equipped with a titanium-enhanced ground strap, this spark plug offers enhanced durability and consistent spark delivery.
  • Platinum Center Electrode Tip: The center electrode tip is made from platinum, providing excellent durability and reliable ignition.
  • Flat Seat Type: The flat seat type ensures a secure and stable fit, making it an ideal choice for efficient ignition in your vehicle.
  • Enhanced Ignition Efficiency: Designed for enhanced ignition efficiency, this spark plug ensures reliable and consistent performance for your vehicle.
See More

DENSO – Coil On Plug Boots-8 (Part No.671-8168)

Coil On Plug Boots-8

from

$135.99
DENSO First Time Fit COP boot sets are identical in form fit color and performance to the factory-installed boots. Every part of each COP boot set construction meets or exceeds OE/OES standards.

Product Features:
  • OE design ensures a tight boot seal that protects against moisture intrusion
  • High temperature resistant material provides greater protection against thermal overload
  • Stainless steel internal spring with resistor to suppress RFI and deliver maximum voltage to the plug
  • Engineered to the specifications used by the original vehicle manufacturer for an exact fit
See More

Idemitsu – Power Steering Fluid – 12 oz (Part No.30102-052A)

Power Steering Fluid - 12 oz

from

$6.29
IDEMITSU Premium PSF is specifically engineered to meet the demanding performance requirements of Honda and Acura power steering units. This advanced technology fluid is formulated with premium quality base oils and the latest additive technologies to provide outstanding protection and performance under the most servere environmental and driving conditions.IDEMITSU Premium PSF can also be used in most Asian Original Equipment Manufacturer (OEM) power steering units that do not utilize electronic power steering technology.

Product Features:
  • Unique friction technology provides efficient and noise-free operation
  • Advanced formulation technology provides outstanding protection to the entire power steering system while delivering smooth performance under the most severe operating conditions
  • Superior low temperature performance for easy flow and protection against cavitation and elimination of “squawking” and “squealing”
  • Excellent compatibility with seals, gaskets and internal components to reduce the potential for leaks and ensures smooth performance over extended intervals
  • Robust anti-wear and inhibitor chemistry provides enhanced component and fluid durability and long-life
See More

Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBC3756)

Ignition Knock (Detonation) Sensor

from

$116.99
MotoRad Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All MotoRad Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
  • Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
  • Designed to meet or exceed all OEM specifications in fit, form & function
  • Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBA3929)

Ignition Knock (Detonation) Sensor

from

$112.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBC3697)

Ignition Knock (Detonation) Sensor

from

$41.99
MotoRad Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All MotoRad Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
  • Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
  • Designed to meet or exceed all OEM specifications in fit, form & function
  • Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Delphi – Knock Sensor (Part No.AS10128)

Knock Sensor

from

$173.99
Manufactured to meet or exceed OE requirements; Delphi Knock Sensors help maximize engine performance with all fuels; Delphi Knock Sensors prevent against engine damage from pre-ignition knocking.

Product Features:
  • Delphi knock sensors help maximize engine performance with all fuels
  • Delphi knock sensors prevent against engine damage from pre-ignition knocking
  • Calibrated for a wide variety of frequencies to detect shifts, and adjust to provide accurate signals to help maximize engine performance
  • Flat frequency response allows the same sensor to be used on different engines and the sensor responds to knock frequencies higher than the primary frequency
  • Ground-isolated design with two-wire shielded harness helps protect the sensor signal from electro-magnetic interference (EMI)
  • Self-generating piezoelectric design requires no power to the sensor
See More

Hitachi – Direct Ignition Coil – (Coil on Plug) (Part No.F3005170923HIT)

Direct Ignition Coil - (Coil on Plug)

from

$64.49
The Hitachi Ignition Coil is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.

Product Features:
  • OE-Equivalent and a direct fit application
  • Enhances durability and increases energy transfer
  • Reduces misfires, rough timing and intermittent starting
  • High profile insulation to prevent arching
  • Radio-Frequency Interference (RFI) Suppression
  • Engineered to withstand extremes in temperatures
See More

Hitachi – Ignition Coil Actual OE Part – New (Part No.IGC0009)

Ignition Coil Actual OE Part - New

from

$106.99
Hitachi’s Ignition Coils (IGCs) provide the needed energy for today’s high efficiency, high power vehicles. High quality materials ensure that even under the most extreme conditions, Hitachi’s IGCs will not deform or malfunction. Our ignition coils help to produce optimal engine efficiency resulting in reliable performance and gas mileage. Electronic connection points are welded to providing durability during heat cycles. Details such as materials, high turns ratios, and protected circuitry provide a durable and reliable product approved by OE manufacturers. Designed to meet the exact needs of each specific vehicle, Hitachi’s ignition coils are the premium choice.

Product Features:
  • Benefits of these quality Ignition Coils include efficient spark and reduced need for wires, long product life, and consistent voltage and amperage output.
See More

DENSO – Original Equipment Quality Direct Ignition Coil (Part No.673-4025)

Original Equipment Quality Direct Ignition Coil

from

$92.99
As the innovator and leader in stick coil technology DENSO has conducted superior testing and inspection processes to insure the highest quality ignition coil. Don’t be fooled by imitations – look for the DENSO name to be sure you’re getting the best.

Product Features:
  • First Time Fit
  • Built to DENSO Original Equipment Standards
See More

NGK – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.49011)

Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece

from

$105.99
NGK ignition coils are manufactured to meet or exceed OE standards for the highest durability and operational performance, so they can be installed with confidence. NGK and their family of automotive products have over 80 year’s experience and are driven by extreme dedication to innovation, performance and quality. Developed and rigorously tested in our ISO 17025 accredited test lab under the most extreme conditions, NGK’s coil designs will outperform all others – far beyond operational environments a vehicle would actually experience

Product Features:
  • OE QUALITY: Vacuum-sealed premium epoxy resin and thermoplastic coil housings provide superior dielectric strength, voltage insulation and durability
  • OPTIMAL PERFORMANCE: Precision coil windings and laminations maximize outputs, custom NGK ASIC chipset optimizes efficiency, prevents component damage
  • EASE OF INSTALLATION: NGK Ignition Coils include ignition control module, premium high temperature coil boot, and jumper harnesses where required
  • THE NGK DIFFERENCE: Featuring superior materials and design enhancements.
  • EXTENSIVE TESTING: NGK ignition coils must pass extreme testing during manufacturing to ensure the highest quality and durability standards are met
  • PRODUCT ENGINEERING: Advanced flow and stress modeling systems preemptively identify and avoid common failure points found in OE and competitor coils
See More

Delphi – Ignition Coil (Part No.GN10553)

Ignition Coil

from

$105.99
Delphi OE technology ignition products are validated to match the vehicles system; OE quality replacement parts for the right fit , form and function; Delphi coils provide OE performance, durability and electromagnetic capacity level requirements.

Product Features:
  • Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
  • Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
  • Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
  • We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues
See More

Carquest – Manifold Absolute Pressure Sensor Connector (Part No.PT2315)

Manifold Absolute Pressure Sensor Connector

from

$5.49
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • All electrical connectors are 100% tested for proper mechanical and electrical fit, form and function
  • Offering thousands of high-quality pigtails & sockets for nearly every electrical job
See More

Carquest Premium – Coil On Plug Insulator Boot: Spring included, Designed for direct fit (Part No.35-7049)

Coil On Plug Insulator Boot: Spring included, Designed for direct fit

from

$6.99
CARQUEST Premium coil on plug boots are engineered to restore ignition boot reliability and performance. We have OE design providing an exact direct fit for your application and the performance and durability meet or exceed OE requirements. It offers excellent heat resistance as well as maximum protection against spark loss. With durable silicone compound for resistance to high heat or abrasion.

Product Features:
  • Provides excellent heat resistance as well as maximum protection against spark loss.
  • Durable silicone compound for resistance to high heat or abrasion
  • Spring included with the coil boot
  • Design for direct compatibility
  • OE design provides an exact fit for your application
  • Multipack provides one time replace all COP for better deal
See More

2010 Infiniti M45 Ignition and Tune-Up Products

You count on your 2010 Infiniti M45 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Ignition and Tune-Up Products. With 33 Ignition and Tune-Up Products ranging in price from $2.29 to $135.99, you’re sure to find everything you need for your 2010 Infiniti M45.

Brands matter. If you want to shop a specific Ignition and Tune-Up Products brand, we stock 12 different brands like Autolite, NGK, and DENSO. 2010 Infiniti M45 Ignition and Tune-Up Products start as low as $2.29!

One of the best ways to find top quality OEM or aftermarket Ignition and Tune-Up Products is by asking professionals. Short of that, you can shop with confidence thanks to our 1,936 extensive product reviews on 2010 Infiniti M45 Ignition and Tune-Up Products. Some of the top-rated Ignition and Tune-Up Products products we carry are OE Series Laser Platinum Spark Plug: Fine Wire Tip Design, PLFR5A-11 with 4.9 stars and Iridium Long-Life Spark Plug: OE Performance, last 100K+ Miles, SK16HR11 with 4.9 stars.

Did we mention you can order your Ignition and Tune-Up Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Ignition and Tune-Up Products inventory for your 2010 Infiniti M45 below to get started!

Top-Rated Ignition and Tune-Up Products Brands For Your 2010 Infiniti M45

Trusted Ignition and Tune-Up Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2010 Infiniti M45 running right for years to come. In our inventory you’ll find brands like Autolite, NGK, DENSO, and even more.

Popular Carquest Premium Ignition and Tune-Up Products

You’ll find popular Carquest Premium brand products across Ignition Coils and Boots. All are waiting to get your 2010 Infiniti M45 back on the road. Some of the top-rated Carquest Premium products in these categories are:

Top-Rated Autolite Ignition and Tune-Up Products


If Autolite are what you’re looking for, our inventory holds plenty. We stock Autolite brand Ignition and Tune-Up Products for your 2010 Infiniti M45, and some of our most reviewed Autolite parts include:

FAQs for 2010 Infiniti M45 Ignition and Tune-Up Products

What are the most purchased Ignition and Tune-Up Products for the 2010 Infiniti M45?

Out of 33 Ignition and Tune-Up Products for the 2010 Infiniti M45, the most popular in our inventory are:
NGK Iridium IX Spark Plug
from $12.99
(105)
NGK Iridium IX Spark Plug
Spark Plugs

What are the top-rated 2010 Infiniti M45 Ignition and Tune-Up Products?

Top-rated Ignition and Tune-Up Products for your 2010 Infiniti M45 based on customer reviews/ratings are:
OE Series Laser Platinum Spark Plug: Fine Wire Tip Design, PLFR5A-11
from $17.99
(82)
OE Series Laser Platinum Spark Plug: Fine Wire Tip Design, PLFR5A-11
“This are the original parts for a Nissan Altima 2002 2.5 4 cyl.”
Iridium Long-Life Spark Plug:  OE Performance, last 100K+ Miles, SK16HR11
from $11.49
(68)
Iridium Long-Life Spark Plug: OE Performance, last 100K+ Miles, SK16HR11
“Replaced the original plugs in my 2012Camry”