2010 Hyundai Sonata Vehicle Hoods

Essential 2010 Hyundai Sonata Vehicle Hoods

KAI – Hood Lift Support (Part No.HY1237104)

Hood Lift Support

from

$22.99
New Standard Replacement Driver Side Hood Lift Support

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

StrongArm – Hood Lift Support: 28.68" Ext Length, 12.25" Travel, 81 Lbs of Force, 1 Pk (Part No.B6336)

Hood Lift Support: 28.68" Ext Length, 12.25" Travel, 81 Lbs of Force, 1 Pk

from

$62.99
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.

Product Features:
  • Heavy Gauge Steel Body
  • Self-Cleaning Piston Assembly
  • Rubber O-Ring Piston Seal
  • Non-Stick Back-Up Ring
  • Hardened Nitride Plated Steel Shaft
  • Engineered In USA To OE Quality Standards For Performance And Durability
  • IATF 16949, ISO 9001 Certified; Passes Extensive Quality Checks And Testing
  • Easy To Install In Just Minutes. No Special Tools Required.
  • Exact Fit Original Equipment Design Guarantees Correct Fit And Function
  • Consistent Performance In All Weather Conditions
  • Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
  • Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle
See More
View Product

StrongArm – Trunk Lift Support: 12.38" Ext Length, 3.75" Travel, 126 Lbs of Force, 1 Pk (Part No.E6428)

Trunk Lift Support: 12.38" Ext Length, 3.75" Travel, 126 Lbs of Force, 1 Pk

from

$31.99
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.

Product Features:
  • Heavy Gauge Steel Body
  • Self-Cleaning Piston Assembly
  • Rubber O-Ring Piston Seal
See More

(2 reviews)
View Product

StrongArm – Trunk Lift Support: 11.76" Ext Length, 4.76" Travel, 119 Lbs of Force, 1 Pk (Part No.E4145)

Trunk Lift Support: 11.76" Ext Length, 4.76" Travel, 119 Lbs of Force, 1 Pk

from

$57.99
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.

Product Features:
  • Heavy Gauge Steel Body
  • Self-Cleaning Piston Assembly
  • Rubber O-Ring Piston Seal
See More
View Product

StrongArm – Hood Lift Support: 15.13" Ext Length, 5.5" Travel, 76 Lbs of Force, 1 Pk (Part No.E6489)

Hood Lift Support: 15.13" Ext Length, 5.5" Travel, 76 Lbs of Force, 1 Pk

from

$22.99
Lift supports are pressurized cylinders that are used to support hoods, hatches and rear window glass in automotive applications. Lift supports are also used in many non-automotive applications. Each Strongarm lift support is custom engineered, and manufactured beyond industry standards to provide smoother operating, and longer lasting performance. Lift supports should be replaced in pairs to ensure safe, reliable support of your hood, hatch, or liftgate.

Product Features:
  • Exact fit original equipment design guarantees correct fit and function
  • Engineered and built to meet or exceed original equipment quality standards
  • Individually tested for performance and reliability
  • Hardened, nitride plated steel shaft provides optimal durability
  • Rubber O-ring piston seal prevents leakage for a controlled lift and consistent performance
  • Heavy gauge steel body is electrostatically painted and heat cured to OE specs
  • Self-Cleaning Piston Assembly provides smooth operation and more reliable performance
  • Upper bushing is manufactured with quality precision providing exact fit and promotes longer operating life
  • No special installation tools required
  • Consistent Performance In All Weather Conditions
  • Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
  • Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle
See More

(10 reviews)
View Product

StrongArm – Hood Lift Support: 19.29" Ext Length, 7.25" Travel, 93 Lbs of Force, 1 Pk (Part No.D4383)

Hood Lift Support: 19.29" Ext Length, 7.25" Travel, 93 Lbs of Force, 1 Pk

from

$89.99
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.

Product Features:
  • Heavy Gauge Steel Body
  • Self-Cleaning Piston Assembly
  • Rubber O-Ring Piston Seal
See More

(1 reviews)
View Product

KAI – Hood Lift Support (Part No.HY1237103)

Hood Lift Support

from

$22.99
New Standard Replacement Passenger Side Hood Lift Support

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

KAI – New Standard Replacement Front Hood Molding (Part No.HY1217100)

New Standard Replacement Front Hood Molding

from

$24.99
With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New Standard Replacement Front Hood Molding. It is Designed to Replace Your Existing Hood Molding. Check to Be Sure it Fits Your Vehicle.

Product Features:
  • Made Of Plastic
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

KAI – Hood Molding (Part No.HY1235101)

Hood Molding

from

$39.99
New Standard Replacement Hood Molding, Chrome

Product Features:
  • Chrome, Made Of Plastic
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More
View Product

Dorman – Anchor Clip-Hood Retainer – 12 mm Hole, 13 mm Stem, 26 mm Head (Part No.963-097D)

Anchor Clip-Hood Retainer - 12 mm Hole, 13 mm Stem, 26 mm Head

from

$4.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More
View Product

2010 Hyundai Sonata Vehicle Hoods

Maybe you’re in the middle of a full rebuild of that 2010 Hyundai Sonata. Maybe you just need a couple of Vehicle Hoods. Either way, Advance Auto Parts has 7 different Vehicle Hoods in our inventory ranging from $4.49 to $62.99. That means you can find the exact parts or products you need to keep that 2010 Hyundai Sonata running smoothly.

Vehicle Hoods are only as good as their brand. We stock 5 different brands to make sure you have plenty of trusted parts to choose from for your 2010 Hyundai Sonata. StrongArm, KAI, and Dorman are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Vehicle Hoods for your 2010 Hyundai Sonata, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Vehicle Hoods to keep your 2010 Hyundai Sonata rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Vehicle Hoods Brands To Make Your 2010 Hyundai Sonata Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2010 Hyundai Sonata demands trusted brand parts and products to keep it running. Many trusted brands of Vehicle Hoods make up Advance Auto Parts’ inventory, and all are ready to help make your Sonata the best it can be. Be sure to browse some of our top Vehicle Hoods brands and parts.