2010 Honda Pilot Exhaust Parts

Essential Exhaust Parts for 2010 Honda Pilots

Beck/Arnley – Exhaust Manifold Gasket Set (Part No.037-8111)

Exhaust Manifold Gasket Set

from

$26.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • High temperature materials seal exhaust leaks
  • Quality construction for durability
  • Packaged in clear plastic for easy visibility and identification of all components
  • Application specific for this vehicle
See More

Ishino Stone – Exhaust Manifold Gas (Part No.A8111113751ISH)

Exhaust Manifold Gas

from

$38.09
Exhaust Manifold Gas

Walker – Exhaust Pipe 2" Inlet (ID) 1.75" Outlet (OD) (Part No.54839)

Exhaust Pipe 2" Inlet (ID) 1.75" Outlet (OD)

from

$47.49
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:
  • RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
  • EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
  • OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
See More

BRExhaust – Direct-Fit Premium Muffler Assembly (Part No.280-191)

Direct-Fit Premium Muffler Assembly

from

$177.99
This BRExhaust muffler assembly is constructed by one of the leading aftermarket suppliers to provide OE-style performance and maintain a factory-like sound. The direct-fit configuration allows for easy, bolt-on installation with no modifications required. The component is designed to offer corrosion protection in addition to optimal noise reduction and low backpressure. Built from 16-gauge steel tubing and fully aluminized, these mufflers feature an OE-style direct fit configuration compatible with your import or domestic vehicle¿while the interior design of the muffler box ensures quiet performance.

Product Features:
  • Based on the original OEM design for a guaranteed perfect fit
  • No welds inside the silencer
  • Easy installation
  • Aluminized steel construction for maximum durability
  • Constructed to reduce flex and withstand vehicle vibration
  • External drain hole extends muffler life by allowing moisture to escape
  • Uniform flow holes facilitate even distribution of exhaust flow through the muffler’s interior
See More

Walker – Quiet-Flow SS Direct Fit Exhaust Muffler Assembly 2" Inlet (OD) 2" Outlet (OD) (Part No.55469)

Quiet-Flow SS Direct Fit Exhaust Muffler Assembly 2" Inlet (OD) 2" Outlet (OD)

from

$206.99
Combining the only broad-market stainless-steel body construction with a direct fit OE-style replacement, Walker Quiet-Flow SS muffler assemblies deliver longer life than typical aluminized mufflers and are available for domestic and foreign vehicles.

Product Features:
  • CORROSION RESISTANT STAINLESS STEEL — The only broad-market muffler body with 100% stainless-steel construction that delivers longer life versus aluminized mufflers while an internal drainage system reduces moisture collection
  • EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and/or welding
  • BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
  • PREMIUM ACOUSTIC CONTROL — OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
  • DESIGN VALIDATED — Acoustic and flow tested for quality OE-style sound you can count on
See More

Dorman – Help – Heat Shield Bolt Set (Part No.03294CD)

Heat Shield Bolt Set

from

$14.29
The catalytic converter heat shield bolt is essential for keeping heat from the exhaust system, away from adjacent car parts and flammable materials positioned under the vehicle. Our direct replacement heat shield bolt secures and holds the catalytic converter heat shield in place.

Product Features:
  • Direct replacement ensures a proper fit every time.
  • For extra protection our Heat Shield Bolts are galvanized for rust-resistance
  • Easy to install – No special tools required during installation
  • Testing on this part includes salt water corrosion and hardness testing for conformance to product standards and quality
See More

BRExhaust – Direct-Fit Premium Resonator Assembly (Part No.284-501)

Direct-Fit Premium Resonator Assembly

from

$268.99
BRExhaust direct-fit exhaust resonators are designed to install easily and help you retain the OE exhaust sound you are looking for. The resonator is engineered to optimally reduce unwanted noises and backpressure while protecting against corrosion. Aluminized steel construction ensures maximum durability.

Product Features:
  • Direct-fit configuration
  • Saves installation time by eliminating the need for the labor intensive bending and welding required with split system exhaust components
  • Optimal noise reduction
  • Low backpressure and corrosion protection
  • Constructed using 16-gauge aluminized steel
  • Aluminized steel construction for maximum durability
  • Constructed to help reduce flex and withstand vehicle vibration
See More

Bosal – Exhaust Gasket (Part No.H4000920883BSL)

Exhaust Gasket

from

$11.02
Exhaust Gasket

Walker – Ultra EPA Universal Catalytic Converter 2.5" Inlet (ID) 2.5" Outlet (ID) (Part No.93253)

Ultra EPA Universal Catalytic Converter 2.5" Inlet (ID) 2.5" Outlet (ID)

from

$179.99
Designed to comply with EPA emissions requirements while delivering premium performance and durability with assured compliance, Walker Ultra Universal Catalytic Converters are available for import and domestic OBDII (1996 and newer) vehicles.

Product Features:
  • EPA COMPLIANT — For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
  • KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES — OE-style high-technology washcoat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
  • DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
  • FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
  • OE-STYLE DESIGN — Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
See More

MagnaFlow – OEM Grade Federal / EPA Compliant Universal Catalytic Converter (Part No.51354)

OEM Grade Federal / EPA Compliant Universal Catalytic Converter

from

$202.99
MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51354 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:
  • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
  • Compact, lightweight construction enables installation in confined areas, welding is required.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

BRExhaust – Exhaust Flange Gasket (Part No.256-109)

Exhaust Flange Gasket

from

$12.29
BRExhaust replacement exhaust brackets make repairs easy. Each gasket has been engineered to according to OE standards to ensure a gas-tight connection and precise fitment. Utilizing the OE specifications also makes installation easy.

Product Features:
  • Designed to facilitate hassle-free exhaust repair
  • Precise fitment
  • Manufactured from quality materials to ensure maximum durability
  • Designed for a leak free connection
  • OE structure and design
  • Built to OEM specifications
  • Secure gas-tight connection
See More

Walker – Donut Exhaust Pipe Flange Gasket: Metal with Fiber, Heat Resistant, Premium Materials (Part No.31377)

Donut Exhaust Pipe Flange Gasket: Metal with Fiber, Heat Resistant, Premium Materials

from

$6.99
Complete your exhaust repair with Walker┬« gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.

Product Features:
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizesfora quality vehicle repair
  • HEAT RESISTANT — Designed to resist heat for long-lasting performance
  • PREMIUM MATERIALS — Made from high-quality materials for durability and long life
  • ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
  • BETTER TOGETHER — Use premium Walker-½ accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
See More

Walker – Exhaust System Hanger Insulator (Part No.35284)

Exhaust System Hanger Insulator

from

$12.79
Complete your exhaust repair with Walker insulators. Available in a variety of styles and sizes, they¿re designed to work with Walker aftermarket replacement parts for quick and easy installation.

Product Features:
  • OE DESIGN — Designed with OE-style features for easy installation and fit
  • PREMIUM MATERIALS — Made from high-quality materials for durability and long life
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
See More

BRExhaust – Exhaust Hanger (Part No.255-011)

Exhaust Hanger

from

$7.99
BRExhaust exhaust insulator mounts are high-quality replacements for original equipment hangers¿designed to fit right the first time. They’re manufactured from premium rubber and available for a variety of car, truck, and van applications. BRExhaust insulator mounts will help to keep your components in the right position, resulting in a longer lifespan for your exhaust system.

Product Features:
  • Exhaust accessory that enables a complete installation process
  • Precise fitment
  • Precise fitment
  • Manufactured according to strict OE standards
  • Reduced Vibration
See More

Walker – Exhaust Clamp (Part No.35335)

Exhaust Clamp

from

$1.99
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.

Product Features:
  • CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • PREMIUM MATERIALS?–?Made from quality material for durability and long life
  • BETTER TOGETHER — Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
See More

BRExhaust – Exhaust Clamp (Part No.250-245)

Exhaust Clamp

from

$16.79
Sourcing mounting parts from the manufacturer that designs and makes the exhaust system is the only way to guarantee the perfect fit. That’s why, whilst developing the exhaust system, BRExhaust also develops the installation hardware to the same standards.

Product Features:
  • whilst developing the exhaust system
  • BRExhaust also develops the installation hardware to the same standards.
  • Manufactured from quality materials to ensure maximum durability
  • Proper fit and functionality to finish your install
  • Perfect, gas-tight performance
  • Exhaust accessory that facilitates a complete installation process.
  • Built to OEM specifications
See More

Walker – EPA Ultra Manifold Converter, Direct Replacement, No Fabrication Needed (Part No.16658)

EPA Ultra Manifold Converter, Direct Replacement, No Fabrication Needed

from

$532.99
Designed to comply with EPA standards while delivering premium performance with assured compliance, Walker Ultra Direct-Fit Catalytic Converters provide premium performance and are available for import and domestic OBDII (1996 and newer) vehicles.

Product Features:
  • EPA COMPLIANT — For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
  • DIRECT-FIT DESIGN — Direct-fit bolt-on replacement solution with OE-style hangers, brackets, routings and heat shields for easy installation that doesn’t require specialized fabrication and/or welding
  • KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES — OE-style high-technology washcoat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
  • STRONG AND DURABLE — Features thick OE-style flanges, hangers and brackets for strength and durability
  • OE-STYLE DESIGN — Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
See More

Dorman – Manifold Converter – Not Carb Compliant – Not For Sale – NY – CA – ME (Part No.674-145)

Manifold Converter - Not Carb Compliant - Not For Sale - NY - CA - ME

from

$516.99
This catalytic converter with integrated exhaust manifold – a.k.a. manifold converter – is precision-engineered to match the original equipment on specific vehicle years, makes and models for a reliable replacement.

Product Features:
  • Direct replacement – this manifold converter is designed to match the fit and performance of the original equipment on specific vehicles.
  • Convenient kit – includes gaskets and downpipe hardware to simplify installation.
  • Durable construction -manufactured within strict tolerances for reliable longevity
  • Trustworthy value – backed by team of engineers and quality control experts in the United States
See More

MagnaFlow – OEM Grade Federal / EPA Compliant Manifold Catalytic Converter (Part No.51893)

OEM Grade Federal / EPA Compliant Manifold Catalytic Converter

from

$530.99
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 51893. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2009-2020 Honda Pilot, 2008-2019 Honda Odyssey, and more, this direct-fit catalytic converter also interchanges with OE parts 18180-5MJ-A00 and 18180-RLV-A00, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
  • Simplifies installation with essential gaskets and hardware being included in the box.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

BRExhaust – Direct-Fit Premium Front Pipe (Part No.750-089)

Direct-Fit Premium Front Pipe

from

$476.99
BRExhaust exhaust pipes are designed for easy bolt-on installations. Thicker gauge metal prevents the need for flow-resistant wrinkle bends, thereby enhancing overall exhaust performance. This pipe is engineered to meet OE specs to ensure performance, reliability and a precise factory-like fit. This part features a direct-fit design allowing for easy installation. If you are looking for a replacement exhaust pipe that will fit and perform exactly like the stock one while lasting even longer, BRExhaust is the brand you can rely on.

Product Features:
  • Manufactured according to strict OE standards
  • Sturdy design featuring premium-grade materials
  • Precise fitment
  • Hassle-free installation and functionality verified by comprehensive testing procedures
  • Easy installation
  • Direct-fit exhaust system component that saves installation time
See More

Walker – Exhaust Y Pipe (Part No.50313)

Exhaust Y Pipe

from

$564.99
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:
  • RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
  • EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
  • OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
See More

Walker – Exhaust Pipe 2" Inlet (ID) 1.75" Outlet (OD) (Part No.54840)

Exhaust Pipe 2" Inlet (ID) 1.75" Outlet (OD)

from

$39.49
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:
  • RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
  • EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
  • OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
See More

Mahle – Cat. Converter Gaske (Part No.H40011159470MAH)

Cat. Converter Gaske

from

$14.35
Cat. Converter Gaske

Walker – 3 Bolt Exhaust Pipe Flange Gasket: Fiber with Metal, Heat Resistant, Premium Materials (Part No.31369)

3 Bolt Exhaust Pipe Flange Gasket: Fiber with Metal, Heat Resistant, Premium Materials

from

$6.99
Complete your exhaust repair with Walker gaskets and flanges. Available in a variety of styles and sizes, they¿re designed to work with OE exhaust components and Walker aftermarket replacement parts.

Product Features:
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • HEAT RESISTANT — Designed to resist heat for long-lasting performance
  • PREMIUM MATERIALS — Made from high-quality materials for durability and long life
  • ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
See More

HJS – Exh. Man. to Pipe Ga (Part No.H4003117121HJS)

Exh. Man. to Pipe Ga

from

$9.51
Exh. Man. to Pipe Ga

Dorman – Help – Exhaust Manifold Hardware Kit (Part No.03415B)

Exhaust Manifold Hardware Kit

from

$29.49
This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.

Product Features:
  • Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles.
  • Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Upgrade your 2010 Honda Pilot with Top-Quality Exhaust Parts

When it comes to maintaining or upgrading your 2010 Honda Pilot, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Honda or enhancing its overall performance, Exhaust Parts are key to keeping your Pilot functioning at its best. At Advance Auto Parts, we offer a wide selection of 43 Exhaust Parts for the 2010 Honda Pilot, designed to meet your needs without breaking the bank. From Exhaust Muffler replacements to Exhaust Hangers upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Exhaust Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Exhaust Parts for your 2010 Honda Pilot at great prices. Our Exhaust Parts inventory for this model ranges from just $1.99 to $2,226.99, with an average price of $257.24. Our 43 Exhaust Parts in stock come from 12 trusted brands, so you’re sure to find the right part for your 2010 Honda Pilot without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2010 Honda Pilot, we stock popular OEM and aftermarket Exhaust Parts from top names like FELPRO Walker, and more. FELPRO Exhaust Parts start at just $5.99 and boast an impressive 5 stars average rating from customers. With 52 customer reviews and counting, our 2010 Honda Pilot Exhaust Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Exhaust Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2010 Honda Pilot is always ready to roll. We’re committed to providing you with everything you need to keep your Pilot in top shape, all in one place. Start shopping confidently below for your 2010 Honda Pilot!

Best-Selling Exhaust Mufflers for 2010 Honda Pilots

Enhance the driving experience in your Honda with 5 quality Exhaust Muffler components, starting at $11.02.

BRExhaust – Direct-Fit Premium Muffler Assembly (Part No.280-191)

Direct-Fit Premium Muffler Assembly

from

$177.99
This BRExhaust muffler assembly is constructed by one of the leading aftermarket suppliers to provide OE-style performance and maintain a factory-like sound. The direct-fit configuration allows for easy, bolt-on installation with no modifications required. The component is designed to offer corrosion protection in addition to optimal noise reduction and low backpressure. Built from 16-gauge steel tubing and fully aluminized, these mufflers feature an OE-style direct fit configuration compatible with your import or domestic vehicle¿while the interior design of the muffler box ensures quiet performance.

Product Features:
  • Based on the original OEM design for a guaranteed perfect fit
  • No welds inside the silencer
  • Easy installation
  • Aluminized steel construction for maximum durability
  • Constructed to reduce flex and withstand vehicle vibration
  • External drain hole extends muffler life by allowing moisture to escape
  • Uniform flow holes facilitate even distribution of exhaust flow through the muffler’s interior
See More

BRExhaust – Direct-Fit Premium Muffler Assembly (Part No.280-193)

Direct-Fit Premium Muffler Assembly

from

$179.99
This BRExhaust muffler assembly is constructed by one of the leading aftermarket suppliers to provide OE-style performance and maintain a factory-like sound. The direct-fit configuration allows for easy, bolt-on installation with no modifications required. The component is designed to offer corrosion protection in addition to optimal noise reduction and low backpressure. Built from 16-gauge steel tubing and fully aluminized, these mufflers feature an OE-style direct fit configuration compatible with your import or domestic vehicle¿while the interior design of the muffler box ensures quiet performance.

Product Features:
  • Based on the original OEM design for a guaranteed perfect fit
  • No welds inside the silencer
  • Easy installation
  • Aluminized steel construction for maximum durability
  • Constructed to reduce flex and withstand vehicle vibration
  • External drain hole extends muffler life by allowing moisture to escape
  • Uniform flow holes facilitate even distribution of exhaust flow through the muffler’s interior
See More

Walker – Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed (Part No.21678)

Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed

from

$177.99
The only broad-market muffler body with 100% stainless-steel construction, Walker Quiet-Flow SS mufflers feature precision fit, superior flow and OE-style sound. Quiet-Flow SS mufflers are available for most domestic and import vehicles.

Product Features:
  • CORROSION RESISTANT STAINLESS STEEL — The only broad-market muffler body with 100% stainless-steel construction that delivers longer life versus aluminized mufflers while an internal drainage system reduces moisture collection
  • EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and/or welding
  • BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
  • PREMIUM ACOUSTIC CONTROL — OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
  • DESIGN VALIDATED — Acoustic and flow tested for quality OE-style sound you can count on
See More

Walker – Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed (Part No.21677)

Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed

from

$173.99
The only broad-market muffler body with 100% stainless-steel construction, Walker Quiet-Flow SS mufflers feature precision fit, superior flow and OE-style sound. Quiet-Flow SS mufflers are available for most domestic and import vehicles.

Product Features:
  • CORROSION RESISTANT STAINLESS STEEL — The only broad-market muffler body with 100% stainless-steel construction that delivers longer life versus aluminized mufflers while an internal drainage system reduces moisture collection
  • EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and/or welding
  • BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
  • PREMIUM ACOUSTIC CONTROL — OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
  • DESIGN VALIDATED — Acoustic and flow tested for quality OE-style sound you can count on
See More

Bosal – Exhaust Gasket (Part No.H4000920883BSL)

Exhaust Gasket

from

$11.02
Exhaust Gasket

Most Popular 2010 Honda Pilot Exhaust Hangers

Customize your Honda with 2 Exhaust Hangers products like Exhaust System Insulators, all priced under $12.79.

Walker – Exhaust System Hanger Insulator (Part No.35284)

Exhaust System Hanger Insulator

from

$12.79
Complete your exhaust repair with Walker insulators. Available in a variety of styles and sizes, they¿re designed to work with Walker aftermarket replacement parts for quick and easy installation.

Product Features:
  • OE DESIGN — Designed with OE-style features for easy installation and fit
  • PREMIUM MATERIALS — Made from high-quality materials for durability and long life
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
See More

BRExhaust – Exhaust Hanger (Part No.255-011)

Exhaust Hanger

from

$7.99
BRExhaust exhaust insulator mounts are high-quality replacements for original equipment hangers¿designed to fit right the first time. They’re manufactured from premium rubber and available for a variety of car, truck, and van applications. BRExhaust insulator mounts will help to keep your components in the right position, resulting in a longer lifespan for your exhaust system.

Product Features:
  • Exhaust accessory that enables a complete installation process
  • Precise fitment
  • Precise fitment
  • Manufactured according to strict OE standards
  • Reduced Vibration
See More

Top Picks for 2010 Honda Pilot Exhaust Fittings

Upgrade Honda Pilots with top-quality Exhaust Fittings parts, including 2 OEM and aftermarket selections for your 2010 model.

BRExhaust – Exhaust Clamp (Part No.250-245)

Exhaust Clamp

from

$16.79
Sourcing mounting parts from the manufacturer that designs and makes the exhaust system is the only way to guarantee the perfect fit. That’s why, whilst developing the exhaust system, BRExhaust also develops the installation hardware to the same standards.

Product Features:
  • whilst developing the exhaust system
  • BRExhaust also develops the installation hardware to the same standards.
  • Manufactured from quality materials to ensure maximum durability
  • Proper fit and functionality to finish your install
  • Perfect, gas-tight performance
  • Exhaust accessory that facilitates a complete installation process.
  • Built to OEM specifications
See More

Walker – Exhaust Clamp (Part No.35335)

Exhaust Clamp

from

$1.99
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.

Product Features:
  • CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • PREMIUM MATERIALS?–?Made from quality material for durability and long life
  • BETTER TOGETHER — Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
See More

In-Demand Exhaust Manifold and Headers for 2010 Honda Pilots

Select from 7 premium Exhaust Manifold and Headers parts for your 2010 Honda Pilot, with prices ranging from $29.49 to $532.99.

Walker – Ultra EPA Universal Catalytic Converter (Part No.16643)

Ultra EPA Universal Catalytic Converter

from

$526.99
Designed to comply with EPA standards while delivering premium performance with assured compliance, Walker Ultra Direct-Fit Catalytic Converters provide premium performance and are available for import and domestic OBDII (1996 and newer) vehicles.

Product Features:
  • EPA COMPLIANT — For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
  • DIRECT-FIT DESIGN — Direct-fit bolt-on replacement solution with OE-style hangers, brackets, routings and heat shields for easy installation that doesn’t require specialized fabrication and/or welding
  • KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES — OE-style high-technology washcoat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
  • STRONG AND DURABLE — Features thick OE-style flanges, hangers and brackets for strength and durability
  • OE-STYLE DESIGN — Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
See More

Dorman – Manifold Converter – Not Carb Compliant – Not For Sale – NY – CA – ME (Part No.674-145)

Manifold Converter - Not Carb Compliant - Not For Sale - NY - CA - ME

from

$516.99
This catalytic converter with integrated exhaust manifold – a.k.a. manifold converter – is precision-engineered to match the original equipment on specific vehicle years, makes and models for a reliable replacement.

Product Features:
  • Direct replacement – this manifold converter is designed to match the fit and performance of the original equipment on specific vehicles.
  • Convenient kit – includes gaskets and downpipe hardware to simplify installation.
  • Durable construction -manufactured within strict tolerances for reliable longevity
  • Trustworthy value – backed by team of engineers and quality control experts in the United States
See More

Dorman – Help – Exhaust Manifold Hardware Kit (Part No.03415B)

Exhaust Manifold Hardware Kit

from

$29.49
This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.

Product Features:
  • Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles.
  • Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Walker – EPA Ultra Manifold Converter, Direct Replacement, No Fabrication Needed (Part No.16658)

EPA Ultra Manifold Converter, Direct Replacement, No Fabrication Needed

from

$532.99
Designed to comply with EPA standards while delivering premium performance with assured compliance, Walker Ultra Direct-Fit Catalytic Converters provide premium performance and are available for import and domestic OBDII (1996 and newer) vehicles.

Product Features:
  • EPA COMPLIANT — For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
  • DIRECT-FIT DESIGN — Direct-fit bolt-on replacement solution with OE-style hangers, brackets, routings and heat shields for easy installation that doesn’t require specialized fabrication and/or welding
  • KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES — OE-style high-technology washcoat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
  • STRONG AND DURABLE — Features thick OE-style flanges, hangers and brackets for strength and durability
  • OE-STYLE DESIGN — Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
See More

MagnaFlow – OEM Grade Federal / EPA Compliant Manifold Catalytic Converter (Part No.51893)

OEM Grade Federal / EPA Compliant Manifold Catalytic Converter

from

$530.99
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 51893. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2009-2020 Honda Pilot, 2008-2019 Honda Odyssey, and more, this direct-fit catalytic converter also interchanges with OE parts 18180-5MJ-A00 and 18180-RLV-A00, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
  • Simplifies installation with essential gaskets and hardware being included in the box.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

MagnaFlow – OEM Grade Federal / EPA Compliant Manifold Catalytic Converter (Part No.51898)

OEM Grade Federal / EPA Compliant Manifold Catalytic Converter

from

$525.99
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 51898. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2009-2020 Honda Pilot, 2008-2019 Honda Odyssey, and more, this direct-fit catalytic converter also interchanges with OE parts 18280-5MJ-A00 and 18280-RLV-A00, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
  • Simplifies installation with essential gaskets and hardware being included in the box.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

Autopart International Inc – Catalytic Converter (Part No.H30002658173API)

Catalytic Converter

from

$336.51
Catalytic Converter

Most Sold 2010 Honda Pilot Exhaust Pipes

Explore our best-selling Honda parts for the 2010 Pilot among 9 OEM and aftermarket options starting from $5.99.

Walker – Donut Exhaust Pipe Flange Gasket: Metal with Fiber, Heat Resistant, Premium Materials (Part No.31377)

Donut Exhaust Pipe Flange Gasket: Metal with Fiber, Heat Resistant, Premium Materials

from

$6.99
Complete your exhaust repair with Walker┬« gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.

Product Features:
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizesfora quality vehicle repair
  • HEAT RESISTANT — Designed to resist heat for long-lasting performance
  • PREMIUM MATERIALS — Made from high-quality materials for durability and long life
  • ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
  • BETTER TOGETHER — Use premium Walker-½ accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
See More

Felpro – Exhaust Pipe Flange Gasket (Part No.60578)

Exhaust Pipe Flange Gasket

from

$19.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Felpro – Exhaust Pipe Flange Gasket (Part No.61338)

Exhaust Pipe Flange Gasket

from

$5.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Walker – 3 Bolt Exhaust Pipe Flange Gasket: Graphite with Steel, Heat Resistant, Premium Materials (Part No.31737)

3 Bolt Exhaust Pipe Flange Gasket: Graphite with Steel, Heat Resistant, Premium Materials

from

$7.99
Complete your exhaust repair with Walker gaskets and flanges. Available in a variety of styles and sizes, they¿re designed to work with OE exhaust components and Walker aftermarket replacement parts.

Product Features:
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • HEAT RESISTANT — Designed to resist heat for long-lasting performance
  • PREMIUM MATERIALS — Made from high-quality materials for durability and long life
  • ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
See More

Walker – 4 Bolt Exhaust Pipe Flange Gasket: Graphite with Steel, Heat Resistant, Premium Materials (Part No.31733)

4 Bolt Exhaust Pipe Flange Gasket: Graphite with Steel, Heat Resistant, Premium Materials

from

$7.49
Complete your exhaust repair with Walker gaskets and flanges. Available in a variety of styles and sizes, they¿re designed to work with OE exhaust components and Walker aftermarket replacement parts.

Product Features:
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • HEAT RESISTANT — Designed to resist heat for long-lasting performance
  • PREMIUM MATERIALS — Made from high-quality materials for durability and long life
  • ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
See More

BRExhaust – Direct-Fit Premium Resonator Assembly (Part No.284-501)

Direct-Fit Premium Resonator Assembly

from

$268.99
BRExhaust direct-fit exhaust resonators are designed to install easily and help you retain the OE exhaust sound you are looking for. The resonator is engineered to optimally reduce unwanted noises and backpressure while protecting against corrosion. Aluminized steel construction ensures maximum durability.

Product Features:
  • Direct-fit configuration
  • Saves installation time by eliminating the need for the labor intensive bending and welding required with split system exhaust components
  • Optimal noise reduction
  • Low backpressure and corrosion protection
  • Constructed using 16-gauge aluminized steel
  • Aluminized steel construction for maximum durability
  • Constructed to help reduce flex and withstand vehicle vibration
See More

Felpro – Exhaust Pipe Flange Gasket (Part No.61015)

Exhaust Pipe Flange Gasket

from

$11.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Walker – Exhaust Pipe 2" Inlet (ID) 1.75" Outlet (OD) (Part No.54839)

Exhaust Pipe 2" Inlet (ID) 1.75" Outlet (OD)

from

$47.49
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:
  • RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
  • EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
  • OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
See More

Walker – Exhaust Pipe 2" Inlet (ID) 1.75" Outlet (OD) (Part No.54840)

Exhaust Pipe 2" Inlet (ID) 1.75" Outlet (OD)

from

$39.49
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:
  • RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
  • EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
  • OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
See More

Top-Rated Exhaust Parts Brands For Your 2010 Honda Pilot

Shop for the best-rated brands offering Exhaust Parts and other products for your 2010 Honda Pilots. Below you’ll find some of our best rated Exhaust Parts from FELPRO and Walker, and more. Exhaust Parts from these brands that fit a 2010 Pilot start at just $1.99 and are rated as high as 5 stars. OEM and aftermarket Exhaust Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular FELPRO 2010 Honda Pilot Exhaust Parts

When it comes to maintaining or upgrading your 2010 Honda Pilot, using quality Exhaust Parts is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Exhaust Parts, specifically designed for the 2010 Honda Pilot. With over 4 FELPRO brand Exhaust Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $5.99, with an average price of just $13.39. Plus, with over 3 customer reviews and an average rating of 5 stars, you can trust that our FELPRO Exhaust Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Exhaust Manifold Gasket Set
from
$16.29
This product is not rated

Exhaust Manifold Gasket Set

“”

Exhaust Pipe Flange Gasket
from
$11.29
This product is not rated

Exhaust Pipe Flange Gasket

“”

Exhaust Pipe Flange Gasket
from
$5.99
This product is not rated

Exhaust Pipe Flange Gasket

“”

Popular Walker 2010 Honda Pilot Exhaust Parts

Walker auto parts is one of the highest quality Exhaust Part brands in the market. Any 2010 Honda Pilot owner should feel confident when installing genuine Walker parts in their vehicle. To ensure the best fit and performance for your 2010 Pilot, Advance Auto Parts carries a full inventory of 14 Walker Exhaust Parts. Plus you will be keeping your Honda in peak condition while saving money because prices on these Walker Exhaust Parts range from $1.99 to $532.99, plus, with more than 10 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Exhaust Parts below will deliver on both quality and value.

Exhaust System Hanger Insulator
from
$12.79
This product is not rated

Exhaust System Hanger Insulator

“”

FAQs for 2010 Honda Pilot Exhaust Parts

Which Exhaust Parts are best-sellers for 2010 Honda Pilots?

Out of 43 Exhaust Parts that fit 2010 Honda Pilots, the following parts are the top sellers:

What’s the price range for 2010 Honda Pilot Exhaust Parts?

Exhaust Part prices for the 2010 Honda Pilot start at $1.99 and go up to $2,226.99 for the most premium parts.

What’s the average price of a Exhaust Part for a 2010 Honda Pilot?

The average price for Exhaust Parts for the 2010 Honda Pilot is $257.24. Keep in mind the variety of part types within our Exhaust Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Exhaust Parts for other Honda Pilot model years?

Yes, we currently carry Exhaust Parts for 21 model years of Honda Pilots between 2003 and 2024. Exhaust Parts are bought most frequently for the following model years: 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015, and 2014.

What are the cheapest Exhaust Parts for my 2010 Honda Pilot?

The cheapest 2010 Honda Pilot Exhaust Parts we carry in stock are:

What types of Exhaust Parts do you sell for my 2010 Honda Pilot?

As of 2/5/25, these are some of the most in-demand types of Exhaust Parts for a 2010 Honda Pilot:

Can I get help with 2010 Honda Pilot Exhaust Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Honda Exhaust Parts and more.

What is your return policy for Honda Pilot Exhaust Parts?

Advance Auto Parts keeps returns simple. For new Honda Pilot Exhaust Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.