2010 Hino 165 Belts and Hoses

Essential Belts and Hoses for 2010 Hino 165s

Gates – Premium Molded Coolant Hose (Part No.23991)

Premium Molded Coolant Hose

from

$7.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Gates – FleetRunner« Heavy-Duty V-Belt (Part No.9463HD)

FleetRunner« Heavy-Duty V-Belt

from

$40.99
Designed for the toughest applications, FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:
  • Patented material provides peak performance at extremely prolonged operating temperatures
  • Heavy-duty construction resists cracking, wear, oil and heat
  • Special compound provides unmatched stability, load carrying capacity and belt life
  • Unique undercord notch pattern offers increased flexibility for smaller diameter pulleys
  • Problem solver for troubled drives
  • Engineered to save your fleet money and reduce downtime
  • Meets RMA oil and heat resistant standards and static conductivity requirements
See More

Gates – FleetRunner« Heavy-Duty V-Belt (Part No.9380HD)

FleetRunner« Heavy-Duty V-Belt

from

$43.99
Designed for the toughest applications, FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:
  • Patented material provides peak performance at extremely prolonged operating temperatures
  • Heavy-duty construction resists cracking, wear, oil and heat
  • Special compound provides unmatched stability, load carrying capacity and belt life
  • Unique undercord notch pattern offers increased flexibility for smaller diameter pulleys
  • Problem solver for troubled drives
  • Engineered to save your fleet money and reduce downtime
  • Meets RMA oil and heat resistant standards and static conductivity requirements
See More

Driveworks – Automotive V-Belt (Part No.45017)

Automotive V-Belt

from

$5.29
The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:
  • This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
  • Polyester cords provide extreme tension-holding capability for longer belt life
  • The raw edge belt design delivers the maximum gripping power
  • The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration
See More

Gates – Hi-Power« II Classical Section Wrapped V-Belt (Part No.A38)

Hi-Power« II Classical Section Wrapped V-Belt

from

$13.99
Featuring a composite, multi-purpose construction, these belts resist oil and heat, ozone, sunlight, weather, and aging. Suitable for all industrial applications, including v-flat drives.

Product Features:
  • Smoother running with less slip and wear for excellent belt service life and reduced pulley wear
  • High-quality rubber compound protects the belt against heat, ozone and sunlight
  • Proprietary Flex-Weave cover is a patented fabric construction, providing extended protection to the belt core from oil, contaminants and heat for longer belt life
  • Flex-bonded cords strongly adhere to the body of the belt, resulting in equal load distribution and absorption of bending stress, fatigue and shock loads without cord deterioration
  • Meets RMA oil and heat resistant standards and static conductivity requirements
  • Temperature Range: -22 Deg. F to +140 Deg. F (-30 Deg. C to +60 Deg. C)
  • NOTE: Available in A, B, C, D and E cross-sections as well as Hi-Power II PowerBand V-belts
See More

Dayco – Industrial V-Belts: 40 In. Outside Circumference, 0.5 In. Width (Part No.AP38)

Industrial V-Belts: 40 In. Outside Circumference, 0.5 In. Width

from

$10.29
The Dayco industrial V-belt is more energy-efficient because it is more flexible. This Dayco belt offers the highest horsepower rating for longer service while its raw edge design resists slippage even at low-drive tensions. Designed for smaller more compact drives, Dayco industrial V-belts offer excellent oil and heat resistance, flexibility and static dissipation. Its special design allows for more efficient load carrying and higher horsepower capabilities.

Product Features:
  • Features high grade engineered polymer compounds to help resist heat, oil, and grease.
  • Reliable performance over an extremely wide range of horsepower and RPM applications
  • Manufactured to OEM specifications
See More

Dayco – V-Belt, Top Cog (Part No.17400)

V-Belt, Top Cog

from

$19.49
Dayco® High Performance V-Belt is the workhorse of the heavy-duty industry. Polyester cord provides maximum power transfer and tension holding capability for the life of the belt. The laminated construction helps absorb greater shock loads associated with diesel engines. These Dayco® High Performance V-Belt advantages translate into less downtime, lower maintenance costs, and increased dependability. Dayco’s High Performance V-Belt meets or exceeds SAE J636 and J637 specifications.

Product Features:
  • The High Performance V-Belt design delivers more flexibility and increases airflow around the belt, so it runs cooler and lasts longer than most competitive belts
  • Polyester cord provides maximum power transfer and tension holding capability for the life of the belt
  • The laminated construction helps absorb greater shock loads associated with diesel engines
  • Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds
See More

Gates – Automotive XL« High Capacity V-Belt (Part No.9380)

Automotive XL« High Capacity V-Belt

from

$31.49
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:
  • Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
  • Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
  • Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
  • Resists oil, heat, ozone, weather and aging for improved belt life
  • Meets or exceeds SAE J636C specifications
See More

Driveworks – Automotive V-Belt, Driveworks (Part No.38017)

Automotive V-Belt, Driveworks

from

$4.19
The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:
  • This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
  • Polyester cords provide extreme tension-holding capability for longer belt life
  • The raw edge belt design delivers the maximum gripping power
  • The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration
See More

Gates – Hi-Power« II Classical Section Wrapped V-Belt (Part No.A43)

Hi-Power« II Classical Section Wrapped V-Belt

from

$14.99
Product Features:
  • Smoother running with less slip and wear for excellent belt service life and reduced pulley wear
  • High-quality rubber compound protects the belt against heat, ozone and sunlight
  • Proprietary Flex-Weave cover is a patented fabric construction, providing extended protection to the belt core from oil, contaminants and heat for longer belt life
  • Flex-bonded cords strongly adhere to the body of the belt, resulting in equal load distribution and absorption of bending stress, fatigue and shock loads without cord deterioration
  • Meets RMA oil and heat resistant standards and static conductivity requirements
  • Temperature Range: -22 Deg. F to +140 Deg. F (-30 Deg. C to +60 Deg. C)
  • NOTE: Available in A, B, C, D and E cross-sections as well as Hi-Power II PowerBand V-belts
See More

Dayco – V-Belt, Top Cog, Dayco (Part No.17380)

V-Belt, Top Cog, Dayco

from

$14.29
Dayco® High Performance V-Belt is the workhorse of the heavy-duty industry. Polyester cord provides maximum power transfer and tension holding capability for the life of the belt. The laminated construction helps absorb greater shock loads associated with diesel engines. These Dayco® High Performance V-Belt advantages translate into less downtime, lower maintenance costs, and increased dependability. Dayco’s High Performance V-Belt meets or exceeds SAE J636 and J637 specifications.

Product Features:
  • The High Performance V-Belt design delivers more flexibility and increases airflow around the belt, so it runs cooler and lasts longer than most competitive belts
  • Polyester cord provides maximum power transfer and tension holding capability for the life of the belt
  • The laminated construction helps absorb greater shock loads associated with diesel engines
  • Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds
See More

Driveworks – Automotive V-Belt, Driveworks (Part No.46317)

Automotive V-Belt, Driveworks

from

$4.09
The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:
  • Made with a fabric reinforced base material; this v-belt has the strength and stability required for long term performance on all v-belt drives
  • Polyester cords provide extreme tension-holding capability for longer belt life
  • The raw edge belt design delivers the maximum gripping power
  • The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration
See More

Driveworks – Automotive V-Belt (Part No.40017)

Automotive V-Belt

from

$5.99
The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:
  • This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
  • Polyester cords provide extreme tension-holding capability for longer belt life
  • The raw edge belt design delivers the maximum gripping power
  • The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration
See More

Dayco – Automotive RPF Raw Edge Cogged Belt (Part No.17450)

Automotive RPF Raw Edge Cogged Belt

from

$15.79
Dayco® High Performance V-Belt is the workhorse of the heavy-duty industry. Polyester cord provides maximum power transfer and tension holding capability for the life of the belt. The laminated construction helps absorb greater shock loads associated with diesel engines. These Dayco® High Performance V-Belt advantages translate into less downtime, lower maintenance costs, and increased dependability. Dayco’s High Performance V-Belt meets or exceeds SAE J636 and J637 specifications.

Product Features:
  • The High Performance V-Belt design delivers more flexibility and increases airflow around the belt, so it runs cooler and lasts longer than most competitive belts
  • Polyester cord provides maximum power transfer and tension holding capability for the life of the belt
  • The laminated construction helps absorb greater shock loads associated with diesel engines
  • Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds
See More

Dayco – Bottom Cog V-Belt; 46.25 Inch Long, Exact Fit Premium Quality (Part No.17463)

Bottom Cog V-Belt; 46.25 Inch Long, Exact Fit Premium Quality

from

$21.29
Dayco’s high performance HD V-belt is one of the most innovative, top performing belts for its application. By combining raw edge construction with a specially formulated polyester cord treatment, it offers excellent resistance to repeated flexing and protection against heat, oil and grease as well as the strength, stability and reliability required for vehicles that still need a heavy-duty V-belt.

Product Features:
  •  Designed for efficient power transmission to vehicle accessories in today’s trucks and buses.
  • áDesigned for efficient power transmission to vehicle accessories in today’s trucks and buses.
  • Provides greater durability and flexibility 35% stronger than all previous versions
  • Features specially treated cords for added strength, stability and reliability
  • Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds
See More

Upgrade your 2010 Hino 165 with Top-Quality Belts and Hoses

When it comes to maintaining or upgrading your 2010 Hino 165, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Hino or enhancing its overall performance, Belts and Hoses are key to keeping your 165 functioning at its best. At Advance Auto Parts, we offer a wide selection of 7 Belts and Hoses for the 2010 Hino 165, designed to meet your needs without breaking the bank. From Radiator Hose replacements to Serpentine and V Belts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 2010 Hino 165 at great prices. Our Belts and Hoses inventory for this model ranges from just $4.09 to $137.99, with an average price of $39.38. Our 7 Belts and Hoses in stock come from 3 trusted brands, so you’re sure to find the right part for your 2010 Hino 165 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2010 Hino 165, we stock popular OEM and aftermarket Belts and Hoses from top names like Driveworks, and more. Driveworks Belts and Hoses start at just $4.09 and boast an impressive 4 stars average rating from customers. With 1 customer reviews and counting, our 2010 Hino 165 Belts and Hoses have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals and more to make sure your 2010 Hino 165 is always ready to roll. We’re committed to providing you with everything you need to keep your 165 in top shape, all in one place. Start shopping confidently below for your 2010 Hino 165!

Best-Selling Radiator Hoses for 2010 Hino 165s

Enhance the driving experience in your Hino with 2 quality Radiator Hose components, starting at $46.99.

Gates – Premium Molded Coolant Hose (Part No.23989)

Premium Molded Coolant Hose

from

$137.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Gates – Molded Coolant Hose (Part No.23996)

Molded Coolant Hose

from

$46.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Heat and ozone resistant cover.
  • Engineered to resist electrochemical degradation – the leading cause of hose failure.
  • Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
  • Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
  • Temperature Rating: -40° F to 275° F (-40° C to 135° C) in coolant hose applications.
  • Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
See More

Most Popular 2010 Hino 165 Serpentine and V Belts

Customize your Hino with 5 Serpentine and V Belts products like V-Belts, all priced under $40.99.

Driveworks – Automotive V-Belt, Driveworks (Part No.46317)

Automotive V-Belt, Driveworks

from

$4.09
The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:
  • Made with a fabric reinforced base material; this v-belt has the strength and stability required for long term performance on all v-belt drives
  • Polyester cords provide extreme tension-holding capability for longer belt life
  • The raw edge belt design delivers the maximum gripping power
  • The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration
See More

Dayco – Bottom Cog V-Belt; 46.25 Inch Long, Exact Fit Premium Quality (Part No.17463)

Bottom Cog V-Belt; 46.25 Inch Long, Exact Fit Premium Quality

from

$21.29
Dayco’s high performance HD V-belt is one of the most innovative, top performing belts for its application. By combining raw edge construction with a specially formulated polyester cord treatment, it offers excellent resistance to repeated flexing and protection against heat, oil and grease as well as the strength, stability and reliability required for vehicles that still need a heavy-duty V-belt.

Product Features:
  •  Designed for efficient power transmission to vehicle accessories in today’s trucks and buses.
  • áDesigned for efficient power transmission to vehicle accessories in today’s trucks and buses.
  • Provides greater durability and flexibility 35% stronger than all previous versions
  • Features specially treated cords for added strength, stability and reliability
  • Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds
See More

Gates – Hi-Power« II Classical Section Wrapped V-Belt (Part No.A38)

Hi-Power« II Classical Section Wrapped V-Belt

from

$13.99
Featuring a composite, multi-purpose construction, these belts resist oil and heat, ozone, sunlight, weather, and aging. Suitable for all industrial applications, including v-flat drives.

Product Features:
  • Smoother running with less slip and wear for excellent belt service life and reduced pulley wear
  • High-quality rubber compound protects the belt against heat, ozone and sunlight
  • Proprietary Flex-Weave cover is a patented fabric construction, providing extended protection to the belt core from oil, contaminants and heat for longer belt life
  • Flex-bonded cords strongly adhere to the body of the belt, resulting in equal load distribution and absorption of bending stress, fatigue and shock loads without cord deterioration
  • Meets RMA oil and heat resistant standards and static conductivity requirements
  • Temperature Range: -22 Deg. F to +140 Deg. F (-30 Deg. C to +60 Deg. C)
  • NOTE: Available in A, B, C, D and E cross-sections as well as Hi-Power II PowerBand V-belts
See More

Dayco – Industrial V-Belts: 40 In. Outside Circumference, 0.5 In. Width (Part No.AP38)

Industrial V-Belts: 40 In. Outside Circumference, 0.5 In. Width

from

$10.29
The Dayco industrial V-belt is more energy-efficient because it is more flexible. This Dayco belt offers the highest horsepower rating for longer service while its raw edge design resists slippage even at low-drive tensions. Designed for smaller more compact drives, Dayco industrial V-belts offer excellent oil and heat resistance, flexibility and static dissipation. Its special design allows for more efficient load carrying and higher horsepower capabilities.

Product Features:
  • Features high grade engineered polymer compounds to help resist heat, oil, and grease.
  • Reliable performance over an extremely wide range of horsepower and RPM applications
  • Manufactured to OEM specifications
See More

Gates – FleetRunner« Heavy-Duty V-Belt (Part No.9463HD)

FleetRunner« Heavy-Duty V-Belt

from

$40.99
Designed for the toughest applications, FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:
  • Patented material provides peak performance at extremely prolonged operating temperatures
  • Heavy-duty construction resists cracking, wear, oil and heat
  • Special compound provides unmatched stability, load carrying capacity and belt life
  • Unique undercord notch pattern offers increased flexibility for smaller diameter pulleys
  • Problem solver for troubled drives
  • Engineered to save your fleet money and reduce downtime
  • Meets RMA oil and heat resistant standards and static conductivity requirements
See More

Top-Rated Belts and Hoses Brands For Your 2010 Hino 165

Shop for the best-rated brands offering Belts and Hoses and other products for your 2010 Hino 165s. Below you’ll find some of our best rated Belts and Hoses from Driveworks, and more. Belts and Hoses from these brands that fit a 2010 165 start at just $4.09 and are rated as high as 4 stars. OEM and aftermarket Belts and Hoses don’t get more top quality, durable, and affordable than from the brands below.

Popular Driveworks 2010 Hino 165 Belts and Hoses

When it comes to maintaining or upgrading your 2010 Hino 165, using quality Belts and Hoses is essential to ensure durability and a perfect fit. Driveworks ticks all of those boxes. We offer a wide selection of Driveworks Belts and Hoses, specifically designed for the 2010 Hino 165. With over 1 Driveworks brand Belts and Hoses in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $4.09. Plus, with over 1 customer reviews and an average rating of 4 stars, you can trust that our Driveworks Belts and Hoses will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Automotive V-Belt, Driveworks
from
$4.09

(1)

Automotive V-Belt, Driveworks

“Quality replacement belt. Great price.”

FAQs for 2010 Hino 165 Belts and Hoses

Which Belts and Hoses are best-sellers for 2010 Hino 165s?

Out of 7 Belts and Hoses that fit 2010 Hino 165s, the following parts are the top sellers:

What’s the price range for 2010 Hino 165 Belts and Hoses?

Belts and Hose prices for the 2010 Hino 165 start at $4.09 and go up to $137.99 for the most premium parts.

What’s the average price of a Belts and Hose for a 2010 Hino 165?

The average price for Belts and Hoses for the 2010 Hino 165 is $39.38. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Belts and Hoses for other Hino 165 model years?

Yes, we currently carry Belts and Hoses for 5 model years of Hino 165s between 2005 and 2009. Belts and Hoses are bought most frequently for the following model years: 2009, 2008, 2007, 2006, and 2005.

What are the cheapest Belts and Hoses for my 2010 Hino 165?

The cheapest 2010 Hino 165 Belts and Hoses we carry in stock are:

What are the top-rated Belts and Hoses that fit the 2010 Hino 165?

Out of 1 reviews by customers, our 2010 Hino 165 Belts and Hoses have an average customer rating of . These are some of the highest-rated Belts and Hose types for the 2010 Hino 165 and their top-rated products:

What types of Belts and Hoses do you sell for my 2010 Hino 165?

As of 2/5/25, these are some of the most in-demand types of Belts and Hoses for a 2010 Hino 165:

Can I get help with 2010 Hino 165 Belts and Hose orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Hino Belts and Hoses and more.

What is your return policy for Hino 165 Belts and Hoses?

Advance Auto Parts keeps returns simple. For new Hino 165 Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.