from

$706.99

Yukon Bearing installation kits are perfect for shops & builders who have shims on the shelf and are looking to save cost over a Master Overhaul kit. This kit uses Timken bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set..

Product Features:

Fits 2011 and up GM 9.25″ IFS
Included are carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve, marking compound and brush.

from

$14.99

Pinion nut washer for GM 7.2″ IFS, 7.5″, 7.6″, 7.6″ IFS, 8.5″, 8.6″ & 9.5″.

Product Features:

Pinion nut washer for GM 7.2″ IFS, 7.5″, 7.625″, 7.6″ IFS, 8.5″, 8.6″ and 9.5″.

from

$115.99

9.25IFS GM 11 & up side bearing adjuster.

Product Features:

Side adjuster
Fits 2011 and up GM 9.25″ IFS

from

$407.99

Yukon yoke for ’98 and newer GM 9.5″ with a 1350 U/joint size and triple lip design. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits 1998 and up GM 9.5″
30 spline
1350 u-joint size
Outside snap ring design
3.625″ snap ring span
1.188″ cap diameter
Strap style

from

$167.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Controlled heat treating process for lasting performance and extended bearing life
Industry leading coverage
Professional technicians know they can depend on National

from

$319.99

Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:

Fits GM 9.25″ IFS
Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.

from

$11.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

For U-Joints 355, 372 & 534G
Contains two 1.81″ bolt center clamps and four 5/16-24 x 1-5/16″ cap screws

from

$266.99

Product Features:

GM10.5″ INTERNAL KIT (OPEN) 30 SPL

from

$10.49

Product Features:

Brand may vary by location

from

$836.74

Timken Wheel Hub Assembly is a single integrated unit that can be bolted directly onto corners, eliminating the need for conventional components like washers, spacers and nuts. Its design provides for lower total system cost, improved performance, reduced weight and lower warranty costs. The Formed Hub utilizes fewer components over conventional 4 x 2 designs, simplifying installation and reducing costs.

Product Features:

Allows the same configuration to be used on driven and non-driven wheels, replacing the conventional 4×2 (dead) spindle.
Features an advanced sensor and sensor technology for superb performance.
Holds bearing setting more consistently than traditional thread and nut designs. The resulting system stiffness reduces rotor run-out and improves brake performance.
Reduces weight by up to 20% per assembly compared to conventional wheel end solutions.
Features an active sensor capable of sensing down to zero speed. Sensor’s speed information can be used for vehicle dynamics control systems, speed control, speedometer, odometer, trip computer and other purposes.
Internally-mounted sensor protects against the elements, which ultimately reduces warranty costs. SENSOR-PAC also utilizes very small sensor-to-target wheel gaps, enabling a much smaller and more cost- effective sensor.
Includes an internally-mounted sensor that protects against debris, corrosion, thermal shock, and other hazards that threaten externally-mounted sensors.
Designed for superior performance in a minimal space. Timken engineers have packaged the sensor within the bearing without increasing overall dimensions to promote high performance and equal load carrying capacity in a minimum space.

from

$39.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$5.99

AxleHubBolt

from

$61.99

Yukon 1410 U/Joint with zerk fitting. 4.188″ snap ring span, 1.118″ cap diameter. Outside snap ring.

from

$28.99

Long shaft inner clip for 9.25″ GM IFS.

Product Features:

Stub axle snap ring
Fits GM 9.25″ IFS

from

$883.99

The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:

Carrier bearing puller
Works with an impact gun to safely and easliy remove carrrier bearings

from

$5.99

DiffrlPinSupportBolt

from

$29.91

With Clamps and Grease The EMPIRE CV Joint Boot Kit is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function. Install one boot kit per wheel to restore vehicle to optimal condition and protect the constant velocity joint from contamination

Product Features:

Help restore the vehicle to like-new condition
Constructed of high strength OE materials
Resists environmental contamination
Protects the CV joint from premature failure

from

$148.99

Redline Synthetic “Shock Proof” Oil with positraction Additive. 4 Quarts.

Product Features:

Includes four quarts of Redline Shockproof oil and one 4oz bottle of Yukon positraction additive

from

$188.99

Bearing race driver. No return.

Product Features:

Bearing race driver
Fits 382A race
All steel construction

from

$29.99

9.5″ GM differential carrier Supershim kit.

Product Features:

Super carrier shim kit for GM 9.5″
Interlocking design makes installation much easier

from

$33.99

This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$76.99

Product Features:

Spindle nut
Fits GM 10.5″ 14 bolt truck
6 holes
1.935″ I.D.

from

$137.90

Differential Bearing

from

$251.99

Differential Carrier

from

$103.99

Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to CHEV 88-12; GMC 94-12;. Please verify your application.

Product Features:

MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
For Years: 1988-2012
Weight approx: 3 Lbs
BEARING ID / BORE: 1.5750 INCH / 40 MM
CENTERLINE: 2.28 INCH / 58 MM
MOUNT WIDTH: 6.62 INCH / 168 MM
WITHOUT PLATE
WITH STUDS

from

$92.99

Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to CADI 02-06; CHEV 97-12; DODGE 03-06; FORD 11-15; GMC 96-12; NISSAN 04-22;. Please verify your application.

Product Features:

MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
For Years: 1996-2022
Weight approx: 2 Lbs
BEARING ID / BORE: 1.5750 INCH / 40 MM
CENTERLINE: 2.28 INCH / 58 MM
MOUNT WIDTH: 6.62 INCH / 168 MM
STYLE: ROUND FRAME
WITHOUT PLATE
WITHOUT STUDS
EXTENDED DUST SHIELD