2010 Dodge Ram 1500 Running Boards and Steps

Xtremeline / Streamline bars -The new and unique design has the styling appeal of a side bar coupled with easy installation features and strength of a running board. With a 5-inch step these bars have over 50% more step area than regular tube steps. Stylish custom molded end caps add streamline styling, can be painted for a custom finish and seals the step from moisture. Results in an OEM finished look. No Drilling most applications – Heavy-duty mounting brackets mount to existing factory holes. A new innovation in mounting brackets make installing these bars quick & easy and the bar can be positioned forward or back to compliment individual style or bar location needs. Rampage Exclusive: Galvanized Steel – Powder Coat, Weather Seal Brackets, Note: Xtremeline and Streamline Bars may also be installed with other aftermarket flat top installation brackets by using the Rampage Top Clamp Conversion Kit.

Product Features:

• New And Unique Design
• 5 in. Step Pads
• Custom Molded End Caps For Streamline Styling
• Sealed To Prevent Moisture
• No Drill Installation
• Newly Innovated Installation Brackets
• Quick Easy And Reliable Install
• Vehicle Specific Mount Required
• Must Be Purchased Separately

Extruded aluminum. Slip resistant rubber step area. Molded end caps add unique style. Cradle mounted boards.

Product Features:

• Vehicle Specific Mount Kit Required; Sold Separately
• Corrosion Resistant Extruded Aluminum Board
• Slip Resistant Textured Step Surface
• Injection Molded Polymer End Caps
• Rocker Panel Gap Strip Included For Finished Look
• Optional Light Kit Available PN[27-6000]

Extruded aluminum. Slip resistant rubber step area. Molded end caps add unique style. Cradle mounted boards.

Product Features:

• Vehicle Specific Mount Kit Required; Sold Separately
• Corrosion Resistant Extruded Aluminum Board
• Slip Resistant Textured Step Surface
• Injection Molded Polymer End Caps
• Rocker Panel Gap Strip Included For Finished Look
• Optional Light Kit Available PN[27-6000]

Dee Zee NXc Steps (board) The NXc step is designed for today crossover utility vehicles (CUV). A universal board combined with custom fit brackets (sold separately) fit all listed applications. The board is available in three different finishes for step and trim, Black or Chrome, Black or Black, Stainless or Black. Lightweight aluminum powder coated frame. Full length protective accent trim. Slip resistant raised rubber grommets on step area. Required custom fit bracket kits sold separately. Black or Black

Product Features:

• Lightweight Aluminum Powder Coated Frame
• Full Length Protective Accent Trim
• Slip Resistant Raised Rubber Grommets On The Step Area
• NRT(TM) Powder Coated Steel Braces
• Mounting Braces Not Included
• Widened 6 Inch Step Area
• No Drilling Required

Westin Molded Running Boards are straight board OE style designs, available in three universal lengths (72in, 79in, 93in). Universal running boards are made of an extruded aluminum base board, feature a 1-piece construction and provide step area grooves for secure footing. Available in lighted or unlighted styles. Universal running boards require a 27-series vehicle specific mounting kit, sold separately.

Product Features:

• OE Style
• UV Resistant Black Molded Polymer
• Extruded Aluminum Base Board
• Cradle Mounted Boards
• Customized Mounting Brackets Sold Separately
• Adds Perfect Finishing Touch To Vehicle

TrailFX Step Bars maximize style and safety when entering and exiting your vehicle. Available in various sizes, shapes, and finishes, TrailFX steps offer a solution for every need. Each pair installs seamlessly against the vehicle contours for a sleek and stylish look. With TrailFX step products, a custom look does not have to break the bank.

Product Features:

• Rocker Panel Mount
• Q235A Steel Finished With A Black Powder Coat Ensures Maximum Strength And Durability: Extra-Large Molded Step Pads Provide Slip-Resistant Entry Points To The Cab
• Welded End Caps Add A Clean, Finished Appearance While Keeping The Elements Out: Steel Mounting Brackets Are Included To Install Steps With Ease
• Oval Step Shape Offers A Wider Stepping Area For Secure Footing
• Provides Moderate Protection Against Road Hazards And Debris

TrailFX Step Bars maximize style and safety when entering and exiting your vehicle. Available in various sizes, shapes, and finishes, TrailFX steps offer a solution for every need. Each pair installs seamlessly against the vehicle contours for a sleek and stylish look. With TrailFX step products, a custom look does not have to break the bank.

Product Features:

• Rocker Panel Mount
• Q235A Steel Finished With A Black Powder Coat Ensures Maximum Strength And Durability: Dual UV-Resistant Molded Step Pads Provide Slip-Resistant Entry And Exit Points To The Cab
• Mounting Brackets Feature Molded Trim Covers For A Seamless Installation: Trapezoid Step Shape Offers A Unique, Attractive Design That Adds Style To Any Vehicle
• Provides Moderate Protection Against Road Hazards And Debris

Xtremeline / Streamline bars -The new and unique design has the styling appeal of a side bar coupled with easy installation features and strength of a running board. With a 5-inch step these bars have over 50% more step area than regular tube steps. Stylish custom molded end caps add streamline styling, can be painted for a custom finish and seals the step from moisture. Results in an OEM finished look. No Drilling most applications – Heavy-duty mounting brackets mount to existing factory holes. A new innovation in mounting brackets make installing these bars quick & easy and the bar can be positioned forward or back to compliment individual style or bar location needs. Rampage Exclusive: Galvanized Steel – Powder Coat, Weather Seal Brackets, Note: Xtremeline and Streamline Bars may also be installed with other aftermarket flat top installation brackets by using the Rampage Top Clamp Conversion Kit.

Product Features:

• New And Unique Design
• 5 in. Step Pads
• Custom Molded End Caps For Streamline Styling
• Sealed To Prevent Moisture
• No Drill Installation
• Newly Innovated Installation Brackets
• Quick Easy And Reliable Install
• Vehicle Specific Mount Required
• Must Be Purchased Separately

TrailFX Step Bars maximize style and safety when entering and exiting your vehicle. Available in various sizes, shapes, and finishes, TrailFX steps offer a solution for every need. Each pair installs seamlessly against the vehicle contours for a sleek and stylish look. With TrailFX step products, a custom look does not have to break the bank.

Product Features:

• Rocker Panel Mount
• Q235A Steel Finished With Titanium Black Ensures Maximum Strength And Durability: Extra-Large Molded Step Pads Provide Slip-Resistant Entry And Exit Points To The Cab
• Welded End Caps Add A Clean, Finished Appearance While Keeping The Elements Out: Steel Mounting Brackets Are Included To Install Steps With Ease
• Provides Moderate Protection Against Road Hazards And Debris
• Larger Step For Secure Footing, Easy Vehicle Access With Slip-resistant Molded Step Pad
• Custom Designed For Each Application. Easy To Install

TrailFX Step Bars maximize style and safety when entering and exiting your vehicle. Available in various sizes, shapes, and finishes, TrailFX steps offer a solution for every need. Each pair installs seamlessly against the vehicle contours for a sleek and stylish look. With TrailFX step products, a custom look does not have to break the bank.

Product Features:

• Rocker Panel Mount
• Q235A Steel Finished With A Gloss Black Powder Coat Ensures Maximum Strength And Durability
• Extra-Large Molded Step Pads Provide Slip-Resistant Entry Points To The Cab
• Oval Step Shape Offers A Wider Stepping Area For Secure Footing
• Provides Moderate Protection Against Road Hazards And Debris

Extruded aluminum. Slip resistant rubber step area. Molded end caps add unique style. Cradle mounted boards.

Product Features:

• Vehicle Specific Mount Kit Required; Sold Separately
• Corrosion Resistant Extruded Aluminum Board
• Slip Resistant Textured Step Surface
• Injection Molded Polymer End Caps
• Rocker Panel Gap Strip Included For Finished Look
• Optional Light Kit Available PN[27-6000]

Westin’s SG6 Running Boards feature textured slip resistant step pads enhancing footing in virtually all weather conditions. SG6 Running Boards also include a rocker panel gap strip to provide users with the appropriate Westin finished look. A polished aluminum finish with a protective anodized coating prevents oxidation increasing durability and extending product life. A vehicle specific mount kit is required and sold separately. The SG6 LED Light Kit is also available and sold separately. Choose Westin’s SG6 Running Boards for the perfect balance between safety, function and style!

Product Features:

• Vehicle Specific Mount Kit Required; Sold Separately
• Stylish Modern Design
• 5 1/2 in. Step Surface Width
• Corrosion Resistant Extruded Aluminum Board
• Injection Molded End Caps
• Slip Resistant Textured Step Surface
• Rocker Panel Gap Strip Included For Finished Look
• Optional Light Kit For End Caps PN[27-60000]

Extruded aluminum. Slip resistant rubber step area. Molded end caps add unique style. Cradle mounted boards.

Product Features:

• Vehicle Specific Mount Kit Required; Sold Separately
• Corrosion Resistant Extruded Aluminum Board
• Slip Resistant Textured Step Surface
• Injection Molded Polymer End Caps
• Rocker Panel Gap Strip Included For Finished Look
• Optional Light Kit Available PN[27-6000]

Westin’s SG6 Running Boards feature textured slip resistant step pads enhancing footing in virtually all weather conditions. SG6 Running Boards also include a rocker panel gap strip to provide users with the appropriate Westin finished look. A polished aluminum finish with a protective anodized coating prevents oxidation increasing durability and extending product life. A vehicle specific mount kit is required and sold separately. The SG6 LED Light Kit is also available and sold separately. Choose Westin’s SG6 Running Boards for the perfect balance between safety, function and style!

Product Features:

• Vehicle Specific Mount Kit Required; Sold Separately
• Stylish Modern Design
• 5 1/2 in. Step Surface Width
• Corrosion Resistant Extruded Aluminum Board
• Injection Molded End Caps
• Slip Resistant Textured Step Surface
• Rocker Panel Gap Strip Included For Finished Look
• Optional Light Kit For End Caps PN[27-60000]

Some people demand a little more from their running boards. When toughness takes precedence the Dee Zee Rough Step running provides a rugged step area for trucks and cargo vans. Our Rough Step running boards are forged out of your choice of industrial gauge steel or heavy duty aluminum and coated with our patented NRT (TM) (No Rust Technology) black powder coat for optimal ruggedness and resistance against corrosion. Our grated design allows mud, water, snow, and what ever else you step in daily to easily pass through, preventing buildup while providing unmatched traction when entering or exiting the vehicle. Plus they are built Dee Zee tough, so you Do not have to feel bad the next time you use them to scrape your boots clean.

Product Features:

• Rugged 12 Gauge Steel Construction Or Heavy Duty Aluminum
• NRT (TM) Black Powder Coat Is A Specially Designed To Increase Corrosion Protection
• Grated Steel Top Provides Unmatched Traction
• Dirt And Water Drain Away To Keep The Board Clear Of Debris
• Made In Americas Heartland USA

Whether you are looking for additional traction or easier vehicle entry, TrailFX Running Boards offer a rigid yet attractive solution for trucks, vans, and SUVs. Spanning the full length of the vehicle, these running boards are designed to withstand and deflect the elements, dirt, and debris. Constructed with high quality materials, and designed with style in mind, TrailFX Running Boards are an essential addition to any personal or professional vehicle.

Product Features:

• 3003-H24 Aluminum Step Finished With Titanium Black Powder Coat Ensures Maximum Strength And Durability
• 6.5 Inch Wide Stepping Area, Which Runs The Full-Length Of The Vehicle Features Aggressive Grated Surface Designed For Maximum Footing In All Weather Conditions
• Heavy Duty Plastic End Caps Add A Clean, Finished Appearance While Keeping The Elements Out
• Steel Mounting Brackets And Protective Accent Trim Are Included To Install To Rocker Panel
• Provides Moderate Protection Against Road Hazards And Debris
• No Drill, Bolt-On Installation Makes Installation Simple

Powerful, definitive and uncompromising as a mountain ridge, ARIES RidgeStep running boards are made for those who gets it done, day after day. With their solid, all-steel construction, non-skid treads and tough powder coat finish, RidgeStep running boards are made to finish the job. Installation of these running boards is easy and secure because they use the ARIES VersaTrac mounting system. The underside of each board is equipped with a channel that accepts a set of heavy-duty bracket inserts. The inserts move along the channel to fit your truck, and the mounting hardware provides a secure attachment. These running boards are designed to fit specific years of the Ram 1500, 2500, 3500, 4500 and 5500 (NOTE: This set of running boards includes vehicle-specific VersaTrac mounting brackets. See the application information to verify compatibility with your vehicle). ARIES RidgeStep running boards are not only made for easier installation, but they are also built to face the harsh elements of the commercial job. They feature high-strength, solid steel construction for a step that can keep up with those steel-toe boots, and they are completely without plastic parts, meaning they will not crack or fade over time. Their stamped, all-steel tread offers a 6-1/2″ wide, non-skid surface that will never wear down no matter how many times you climb in and out of your truck. The end caps are also made from steel and are welded to contour to the body of your truck for a professional finish. RidgeStep running boards come with a unique E-coat and textured black powder coat finish to not only withstand rust but also to hide minor scratches and grime.

Product Features:

• High-strength, all-steel construction with no plastic parts
• Angular design for a tough, no-nonsense look on hardworking trucks
• Stamped steel treads for a non-skid step that will never wear or crack
• Flat profile and 6-1/2″ width provide a comfortable step
• Textured black powder coat easily hides minor scratches and grime
• Dual-layer E-coat and powder coat finish for maximum corrosion resistance
• Welded steel end caps for a durable accent
• VersaTrac mounting system for easy installation and vehicle customization
• No-drill, vehicle-specific application for a custom fit
• Heavy-duty, powder-coated steel mounting brackets for a solid step

Extruded aluminum. Slip resistant rubber step area. Molded end caps add unique style. Cradle mounted boards.

Product Features:

• Vehicle Specific Mount Kit Required; Sold Separately
• Corrosion Resistant Extruded Aluminum Board
• Slip Resistant Textured Step Surface
• Injection Molded Polymer End Caps
• Rocker Panel Gap Strip Included For Finished Look
• Optional Light Kit Available PN[27-6000]

Westin’s SG6 Running Boards feature textured slip resistant step pads enhancing footing in virtually all weather conditions. SG6 Running Boards also include a rocker panel gap strip to provide users with the appropriate Westin finished look. A polished aluminum finish with a protective anodized coating prevents oxidation increasing durability and extending product life. A vehicle specific mount kit is required and sold separately. The SG6 LED Light Kit is also available and sold separately. Choose Westin’s SG6 Running Boards for the perfect balance between safety, function and style!

Product Features:

• Vehicle Specific Mount Kit Required; Sold Separately
• Stylish Modern Design
• 5 1/2 in. Step Surface Width
• Corrosion Resistant Extruded Aluminum Board
• Injection Molded End Caps
• Slip Resistant Textured Step Surface
• Rocker Panel Gap Strip Included For Finished Look
• Optional Light Kit For End Caps PN[27-60000]

Extruded aluminum. Slip resistant rubber step area. Molded end caps add unique style. Cradle mounted boards.

Product Features:

• Vehicle Specific Mount Kit Required; Sold Separately
• Corrosion Resistant Extruded Aluminum Board
• Slip Resistant Textured Step Surface
• Injection Molded Polymer End Caps
• Rocker Panel Gap Strip Included For Finished Look
• Optional Light Kit Available PN[27-6000]

Made from heavy duty 16 gauge steel and mounted with powder coated braces help prevent rust and wear, keeping your boards strong. With the louvers in the boards allows mud, snow, water, and whatever else you step in daily to easily pass through.

Product Features:

• Made From Heavy Duty 16 Gauge Steel
• Allows Water And Debris To Go Through The Board
• 3 Board Lengths Cover Most Full Size Trucks
• Made In USA

Dee Zee Rough Step – Industrial gauge steel coated in Dee Zee black NRT (No Rust Technology) powder coat to increase corrosion resistance. Industrial grating step provides extra traction getting in and out of the vehicle while allowing mud, water, snow, and ice to drain off the stepping area.

Product Features:

• No Rust Technology Powder Coat Is A Specially Designed To Increase Corrosion Protection
• Industrial Grating Step Provides Extra Traction Getting In And Out Of The Vehicle While Allowing Mud, Water, Snow, And Ice To Drain Off The Stepping Area
• Rugged 12 Gauge Steel Construction
• Protective Black Powder Coat Finish
• Grated Steel Top Provides Unmatched Traction

Extruded aluminum. Slip resistant rubber step area. Molded end caps add unique style. Cradle mounted boards.

Product Features:

• Vehicle Specific Mount Kit Required; Sold Separately
• Corrosion Resistant Extruded Aluminum Board
• Slip Resistant Textured Step Surface
• Injection Molded Polymer End Caps
• Rocker Panel Gap Strip Included For Finished Look
• Optional Light Kit Available PN[27-6000]

Dee Zee NXc Steps (board) The NXc step is designed for today crossover utility vehicles (CUV). A universal board combined with custom fit brackets (sold separately) fit all listed applications. The board is available in three different finishes for step and trim, Black or Chrome, Black or Black, Stainless or Black. Lightweight aluminum powder coated frame. Full length protective accent trim. Slip resistant raised rubber grommets on step area. Required custom fit bracket kits sold separately. Black or Black

Product Features:

• Lightweight Aluminum Powder Coated Frame
• Full Length Protective Accent Trim
• Slip Resistant Raised Rubber Grommets On The Step Area
• NRT(TM) Powder Coated Steel Braces
• Mounting Braces Not Included
• Widened 6 Inch Step Area
• No Drilling Required

Dee Zee Rough Step – Industrial gauge steel coated in Dee Zeeblack NRT (No Rust Technology) powder coat to increase corrosion resistance. Industrial grating step provides extra traction getting in and out of the vehicle while allowing mud, water, snow, and ice to drain off the stepping area.

Product Features:

• No Rust Technology Powder Coat Is A Specially Designed To Increase Corrosion Protection
• Industrial Grating Step Provides Extra Traction Getting In And Out Of The Vehicle While Allowing Mud, Water, Snow, And Ice To Drain Off The Stepping Area
• Rugged 12 Gauge Steel Construction
• Protective Black Powder Coat Finish
• Grated Steel Top Provides Unmatched Traction

TrailFX Step Bars maximize style and safety when entering and exiting your vehicle. Available in various sizes, shapes, and finishes, TrailFX steps offer a solution for every need. Each pair installs seamlessly against the vehicle contours for a sleek and stylish look. With TrailFX step products, a custom look does not have to break the bank.

Product Features:

• Rocker Panel Mount
• T304 Marine-Grade Stainless Steel Ensures Maximum Strength And Durability
• Extra-Large Molded Step Pads Provide Slip-Resistant Entry And Exit Points To The Cab: Oval Step Shape Offers A Wider Stepping Area For Secure Footing
• Welded End Caps Add A Clean, Finished Appearance While Keeping The Elements Out: Steel Mounting Brackets Are Included To Install Steps With Ease
• Provides Moderate Protection Against Road Hazards And Debris

TrailFX Step Bars maximize style and safety when entering and exiting your vehicle. Available in various sizes, shapes, and finishes, TrailFX steps offer a solution for every need. Each pair installs seamlessly against the vehicle contours for a sleek and stylish look. With TrailFX step products, a custom look does not have to break the bank.

Product Features:

• Rocker Panel Mount
• T304 Marine-Grade Stainless Steel Ensures Maximum Strength And Durability
• Extra-Large Molded Step Pads Provide Slip-Resistant Entry And Exit Points To The Cab
• Provides Moderate Protection Against Road Hazards And Debris

TrailFX Step Bars maximize style and safety when entering and exiting your vehicle. Available in various sizes, shapes, and finishes, TrailFX steps offer a solution for every need. Each pair installs seamlessly against the vehicle contours for a sleek and stylish look. With TrailFX step products, a custom look does not have to break the bank.

Product Features:

• Rocker Panel Mount
• Q235A Steel Finished With Titanium Black Ensures Maximum Strength And Durability: Extra-Large Molded Step Pads Provide Slip-Resistant Entry And Exit Points To The Cab
• Welded End Caps Add A Clean, Finished Appearance While Keeping The Elements Out: Steel Mounting Brackets Are Included To Install Steps With Ease
• Oval Step Shape Offers A Wider Stepping Area For Secure Footing: 60 Degree Bent Ends Tuck Into The Vehicle Body Which Offer A Smooth, Seamless Look
• Provides Moderate Protection Against Road Hazards And Debris
• Larger Step For Secure Footing, Easy Vehicle Access With Slip-resistant Molded Step Pad
• Custom Designed For Each Application. Easy To Install