2010 Dodge Nitro Differentials

Find your specific 2010 Dodge Nitro original or aftermarket Differentials below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.

Essential 2010 Dodge Nitro Differentials

from

$57.99

Cross pin shaft for 8.25″ Chrysler.

Product Features:

Cross pin shaft for Chrysler 8.25″
Fits standard open differentials only

from

$215.99

Bearing race driver. No return.

Product Features:

Bearing race driver
Fits M802011 race
All steel construction

from

$115.99

7.25″ & 8.25″ Chrysler REDI sleeve.Yukon Mighty seal.

Product Features:

Pinion Redi-sleeve
Fits Chrylser 7.25″ and 8.25″

from

$37.99

Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.

Product Features:

Fits 1976 and up Chrysler 8.25″
Included are a pinion seal, crush sleeve, complete shim kit, marking compound and brush.

from

$226.99

Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:

All products are designed to meet or exceed OE quality, form, fit and funtion.

from

$78.99

Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for ’76 & up Chrysler 8.25″ rear.

Product Features:

Fits 1976 and up Chrysler 8.25″
Includes carrier bearings and races

from

$70.40

Dorman’s Differential Cover is engineered for long-lasting protection of the differential. Designed as a direct replacement, a proper fit is assured every time.

Product Features:

Comes with pre-installed magnet in cover
Corrosion resistant coating to help prevent rusting
Includes high quality rubber fill plug (where applicable)
Constructed from durable stamped steel

from

$5.99

This differential cover plug is designed to match the fit & function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this differential cover plug matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$26.99

8.25″ Chrysler pinion gear thrust washer.

Product Features:

Pinion gear thrust washer
Fits Chrysler 8.25″

from

$23.79

CONE

from

$311.99

Yukon standard open spider gear kit for ’97 and newer 8.25″ Chrysler with 29 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.

Product Features:

Spider gear kit
Fit Chrysler 8.25″ open differntial with 29 spline axles
Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.

from

$12.49

Valvoline High Performance Synthetic Gear Oil is the thermally stabile extreme pressure lubricant that offers outstanding protection for gearboxes and differentials in passenger cars, light trucks, and sport utility vehicles. Combined with high quality synthetic base oils, our formula’s superior additives help reliably safeguard against severe temperatures, shock loads, foaming, scuffing, scouring, corrosion and pitting in high load, high torque and high horsepower conditions. Can be used in conventional and limited slip hypoid differentials where GL-5 is specified as well as non-synchronized manual transmissions that require GL-4. Protect your gears with Valvoline, the #1 gear oil brand.

Product Features:

HIGH PERFORMANCE EXTREME-PRESSURE ADDITIVES HELP MINIMIZE WEAR in high pressure and high temperature conditions
EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION can easily handle both winter and summer conditions for dependable coverage and protection year-round
REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
FIGHTS CORROSION AND RUST with emulsifying agents and safeguards against impurities, oxidation and thermal breakdown
SUPERIOR ADDITIVES help reliably safeguard against severe temperatures, shock loads, foaming, scuffing, scouring, corrosion and pitting in high load, high torque and high horsepower conditions

from

$9.49

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$799.99

The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a Spartan Locker for better traction. The Spartan locker by USA standard gear is a mechanical locker that replaces the spiders in a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The couplers and drivers are made from 9310 steel, for added strength. Each Spartan locker carries a one year warranty against defect.

Product Features:

Fits Chrysler 8.25″ with 29 spline axles
Made from 9310 steel for added strength
Replaces the spiders in a standard carrier case

from

$33.13

Pinion Seal

from

$209.99

All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!

from

$15.49

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$39.99

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$289.99

Yukon round companion flange for Jeep Liberty rear, Chrysler 8.25″. Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits Chrysler 8.25″
27 spline
Round companion flange

from

$16.99

Product Features:

PINION SHIM-DANA 30,35.50

from

$394.99

Yukon replacement standard open loaded carrier for Liberty Dana 30, 3.73 & up.

Product Features:

Standard open carrier case
Includes spider gears
Fits Jeep Liberty front
3.73 and up ratio only

from

$5.99

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

Leading Manufacturer Of Quality Replacement Parts For Jeep
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Improve The Performance
Easy Installation

from

$10.99

Pinion nut for Chrysler 7.25″, 8.0″ IFS, 8.25″, 8.75″ fine spline, 9.25″ front & rear, 7/16″ x 14.

Product Features:

Pinion nut for Chrysler 8.0″ IFS, 8.25″, 8.75″ with 29 spline pinion and 9.25″ rear
7/8″ x 14 thread

from

$12.99

8.25″ Chrysler cover gasket.

Product Features:

Cover gasket
Fits Chrysler 8.25″

from

$10.99

Direct replacement – this differential cover plug matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$2.89

Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:

All products are designed to meet or exceed OE quality, form, fit and funtion.

from

$205.99

Product Features:

CHRY 8.25″ INTERNAL KIT 29 SPLINES 1997 AND UP

Popular 2010 Dodge Nitro Differentials Categories

Differential Oil

Rear Differential Cover Gaskets

Differential Open Unit and Components

Differential Covers

Differential Pinion Shaft Lock Bolts

Differential Bearings

Differential Pinion Pilot Bearings

Differential Carriers

Differential Bearing Kits

Front Differential Pinion Bearings

Differential Spider Gear Kits

Differential Rebuild Kits

Differential Carrier Shim Kits

Differential Pinion Seals

Differential Cover Plugs

Differential Ring and Pinions

Differential End Yokes

Rear Differential Pinion Bearings

Differential Spools

Differential Carrier Bearings

Rear Housing Cover Gaskets

Differential Drain Plugs

Differential Ring Gear Bolts

Bearing Race Drivers

Differential Crush Sleeves

Pinion Shaft Seals

Differential End Yoke Nut

Differential Side Bearing Spacers

Differential Pinion Shims

Differential Pinion Shaft Nuts

Differential Cross Pins

Differential Pinion Gear Thrust Washers

Differential Ring and Pinion Kits

Differential Spider and Pinion Gear Kits

Maybe you’re in the middle of a full rebuild of that 2010 Dodge Nitro. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 113 different Differentials in our inventory ranging from $1.49 to $2,069.99. That means you can find the exact parts or products you need to keep that 2010 Dodge Nitro running smoothly.

Differentials are only as good as their brand. We stock 17 different brands to make sure you have plenty of trusted parts to choose from for your 2010 Dodge Nitro. Valvoline, Driveworks, and Royal Purple are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 2010 Dodge Nitro, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 2,522 reviews in this category, some of the top rated parts include Differential Plug, Rubber with 4.8 stars and Differential Shaft Lock Bolt with 4.0 stars.

So if you’re in the market for aftermarket Differentials to keep your 2010 Dodge Nitro rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 2010 Dodge Nitro Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2010 Dodge Nitro demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your Nitro the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular Royal Purple Differentials

We carry Royal Purple parts in our stock across Differential Oil categories, plus more. For a 2010 Dodge Nitro, our most popular Royal Purple Differentials include:

from $25.99

(57)

MaxGear SAE 75W140 High Performance Gear Oil w/Friction Modifier Additive, 1 QT

Differential Oil

Top 2010 Dodge Nitro Differentials from Valvoline

Valvoline products are another trusted brand when it comes to Differentials for your 2010 Dodge Nitro. Popular Valvoline parts include:

from $69.99

(364)

SynPower Transmission & Differential Gear Oil: Full Synthetic 75W-140, 1 Gallon

Differential Oil

from $32.99

(235)

High Performance Transmission & Differential Gear Oil: Conventional 80W-90, 1 Gallon

Differential Oil

FAQs for 2010 Dodge Nitro Differentials

What are the most purchased Differentials for the 2010 Dodge Nitro?

Out of 113 Differentials for the 2010 Dodge Nitro, the most popular in our inventory are:

from $19.99

This product is not rated

Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-140, 1 Quart

Differential Oil

from $10.79

(33)

Taper Bearing Set

Differential Bearings

from $6.79

(21)

DIFFERENTIAL GASKET

Rear Housing Cover Gaskets

What are the top-rated 2010 Dodge Nitro Differentials?

Top-rated Differentials for your 2010 Dodge Nitro based on customer reviews/ratings are:

from $5.99

(11)

Differential Plug, Rubber

“I used this Rubber plug to fill a pre-drilled hole in a air intake tube that I customized for a particular application in my car, and it works beautif”

from $5.99

(11)

Differential Shaft Lock Bolt

“great”

from $23.99

(7)

Bearings

“Good price”

2010 Dodge Nitro Differentials

More 2010 Dodge Nitro Differentials

Essential 2010 Dodge Nitro Differentials

Yukon Gear – Cross Pin Shaft For 8.25" Chrysler (Part No.33308)

Yukon Gear – Bearing Race Driver (Part No.56020)

Yukon Gear – 7.25" & 8.25" Chrysler Redi Sleeve (Part No.30224)

Yukon Gear – Minor Install Kit For Chrysler 76 & Up 8.25" Differential (Part No.12004)

Pro-King – Differential Internal Nest Kit (Part No.722B717A)

Yukon Gear – Carrier Installation Kit For ’76 & Up Chrysler 8.25" Rear (Part No.57014)

Dorman – Rear Differential Cover (Part No.J7019701318DOR)

Dorman – Help – Differential Plug, Rubber (Part No.65293)

Yukon Gear – 8.25" Chrysler Pinion Gear Thrust Washer (Part No.33273)

FAG US – CONE (Part No.KLM603049)

Yukon Gear – Standard Open Spider Gear Kit For ’97 And Newer 8.25" Chrysler With 29 Spline Axles (Part No.16003)

Valvoline – High Performance Transmission & Differential Gear Oil: Conventional 75W-90, 1 Quart (Part No.VV820)

National – Bearings (Part No.M86610)

USA Standard Gear – Spartan Locker For Chrysler 8.25" With 29 Spline Axles, Includes Heavy-Duty Cross Pin Shaft (Part No.17038)

Spicer – Pinion Seal (Part No.J7010349364SPI)

Motive Gear – Differential Ring and Pinion (Part No.D30-513RJK)

National – Bearings (Part No.HM88610)

National – Shaft Repair Sleeve (Part No.99139)

Yukon Gear – Round Companion Flange For Jeep Liberty Rear, Chrysler 8.25" (Part No.41120)

Motive Gear – Differential Pinion Shim Kit (Part No.1112)

Yukon Gear – Replacement Standard Open Loaded Carrier For Liberty Dana 30, 3.73 & Up (Part No.20058)

Crown Auto Jeep Replacmnt – Model 30 Front Axle/ Model 44 Front Axle/ Model 35 Rear Axle/ Amc 20 Rear Axle (Part No.J3182601)

Yukon Gear – Pinion Nut (Part No.33142)

Yukon Gear – 8.25" Chrysler Cover Gasket (Part No.23000)

Needa Parts – Rubber Differential Plug Chrysler 2008-2000 (sold by each) (Part No.090-062)

Pro-King – Crush Sleeve (Part No.721A034)

Motive Gear – Differential Carrier Gear Kit (Part No.C8.25BIL)

Popular 2010 Dodge Nitro Differentials Categories