2010 Dodge Dakota Towing Products

Essential 2010 Dodge Dakota Towing Products

Hopkins – Trailer Tail Light Converter: Protects Vehicle Electronics, Powers up to 5.0A (Part No.46255)

Trailer Tail Light Converter: Protects Vehicle Electronics, Powers up to 5.0A

from

$70.99
Many of today’s vehicles do not possess the electrical means for powering the extra voltage requirements of a trailer. Power Taillight Converters units completely isolate the tow vehicle from trailer malfunctions. Power is taken directly from the battery for isolation and brighter trailer tail lights.

Product Features:
  • For vehicles equipped with independent bulb turn signals or common bulb systems
  • Protects tow vehicle electronics from wiring shorts
  • Includes 14 ga. power lead wire, fuse & fuse assembly, splices, and cable ties
  • Powers up to 5.0 amps per output
  • Receives power directly from the battery
  • Includes vehicle side 4 flat
  • Includes dust cover and grease packet to prevent corrosion
  • Includes Dust Cover And Grease Packet To Prevent Corrosion
See More

Husky Towing – OE Styl 7Way Blade, With Quick Install(Tm) Connector, With 180Deg Reinforced Lid (Part No.30406)

OE Styl 7Way Blade, With Quick Install(Tm) Connector, With 180Deg Reinforced Lid

from

$36.99
Product Features:
  • Allows For Didge Tructs To Adapt To The Quick Install(TM) 7 RV Blade
  • Reinforced Lid Opens 180 Degrees To Prevent Breaking
  • Ultimate Weatherproofing
See More

Hopkins – 42115, DODGE Vehicle Specific Towing Wiring Kit (Part No.42115)

42115, DODGE Vehicle Specific Towing Wiring Kit

from

$37.49
Don’t splice onto your vehicle’s factory wiring harness. Simply plug in this Hopkins® vehicle wiring kit featuring exact OEM matching connectors for a perfect weather-tight fit. This kit includes the accessories needed to get you towing faster.

Product Features:
  • Plug-In Simple!® Wiring Kit
  • Utilizes OEM connectors for enhanced fit and weatherproofing
  • Includes vehicle side 4 flat
  • Corrosion resistant terminals
  • Impact and corrosion resistant
  • Includes dust cover and grease packet to prevent corrosion
  • Includes Step-By-Step Instructions
See More

Hopkins – Vehicle Wiring Kit (Part No.42105)

Vehicle Wiring Kit

from

$40.99
Dont splice onto your vehicles factory wiring harness. Simply plug in this Hopkins® vehicle wiring kit featuring exact OEM matching connectors for a perfect weather-tight fit. This kit includes the accessories needed to get you towing faster.

Product Features:
  • Plug-In Simple® Wiring Kit
  • Utilizes OEM Connectors For Enhanced Fit And Weatherproofing
  • Includes Vehicle Side 4 Flat
  • Corrosion Resistant Terminals
  • Impact And Corrosion Resistant
  • Includes Dust Cover And Grease Packet To Prevent Corrosion
  • Includes Step-By-Step Instructions
See More

CURT – Trailer Hitch: 2" Receiver, 5,000 LB Capacity, Installs as low as 30 Mins (Part No.13229)

Trailer Hitch: 2" Receiver, 5,000 LB Capacity, Installs as low as 30 Mins

from

$169.99
Whatever your task at hand — whether it’s launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close — CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Dodge Dakota and Mitsubishi Raider (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 5,000 lbs. GTW and 500 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 5,500 lbs. WD and 550 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2″ receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.

Product Features:
  • Rated to 5,000 lbs. gross trailer weight and 500 lbs. tongue weight
  • Compatible with weight distribution hitch (5,500 lbs. WD / 550 lbs. WDTW)
  • Custom-made in an OEM style for specific vehicles
  • Concealed main body for OE look and seamless integration with the vehicle
  • Tested for safety in accordance with SAE J684
  • Precisely welded for superior strength and fit
  • Protected by a durable high-gloss black powder coat finish
  • Co-cured in a rust-resistant liquid A-coat, inside and out
  • Equipped with an open-back receiver for easy cleaning
  • Made in USA (may include imported hardware)
See More

Husky Towing – Compatible With Controllers With A Connector, 36 Inch Length, 2 Plug (Part No.31864)

Compatible With Controllers With A Connector, 36 Inch Length, 2 Plug

from

$26.99
Husky custom wiring harnesses fits all Husky brake controls that have a similar shaped plug. Simply attach the adapter to the Husky brake control. The safest or easiest way to wire a brake control to your tow-prepped vehicle.

Product Features:
  • The Safest Or Easiest Way To Wire A Brake Control To Your Tow-Prepped Vehicle
  • Simply Attach The Adapter To The Brake Control
  • Constructed with durable, quality materials, and is rigorously tested to industry safety standards
  • Easy to install
See More

Hopkins – 47297, InSIGHT Plug In Simple!® Trailer Brake Control (Part No.47297)

47297, InSIGHT Plug In Simple!® Trailer Brake Control

from

$124.99
New trucks are becoming more car-like every year making it almost impossible to install a traditional brake controller. With the InSIGHT brake control, you gain the flexibility needed to make a simple, no tools required installation in any vehicle. This three part system allows the driver to bring the display back in sight where they can see what is going on as well as bringing the controls within a comfortable reach whether you are right or left handed. Mount the brain of the system out of sight. So, no more banging your knee every time you get in and out of your vehicle. This proportional brake controller creates stops that are safe and smooth, making you feel like you aren’t even towing a trailer! With easy to set gain adjustments and a digital display will make setting this brake control quick and easy. Seven On-the-fly sensitivity settings allows you to adjust for trailer weights and weather at the press of a button. Most states and provinces require a trailer brake controller based on the weight of the trailer.

Product Features:
  • Proportional braking
  • No Tools Required Installation, no drilling required
  • Percentage of braking power shown
  • 7 Sensitivity Settings for Advanced Braking Control
  • Intuitive vertical manual slide
  • Short Proof Protected
  • Controls up to 8 trailer brakes
See More

Hopkins – Time Based Brake Control – Digital (Part No.47285)

Time Based Brake Control - Digital

from

$84.99
The 47285 brake control utilizes time based actuation for applying braking power to the trailer brakes. The built-in digital display makes it easy for setting braking intensity. The braking force to the trailer can easily be adjusted from 5% to 99% for setting the exact percentage of brake power desired. Most states and provinces require a trailer brake controller based on the weight of the trailer.

Product Features:
  • Time-Based Braking
  • Mounts At Any Angle
  • Percentage Of Braking Power Shown
  • Fully Digital Settings
  • Intuitive Vertical Manual Slide
  • Short Proof Protected
  • Controls Up To 4 Trailer Brakes
See More

Hopkins – Premium Brake Controller with Smart LED Display (Part No.47225)

Premium Brake Controller with Smart LED Display

from

$73.99
The 47225 brake control utilizes time based actuation for applying braking power to the trailer brakes. An LED indicator will glow displaying braking intensity. The brighter the glow, the more braking force is being applied to the trailer brakes. Most states and provinces require a trailer brake controller based on the weight of the trailer.

Product Features:
  • Smart LED Display Shows Trailer Connection
  • Braking Function/Short circuit Notification
  • Changes Green To Yellow As Power Increases
  • Plug In Simple Feature
  • Intuitive vertical manual slide
  • Short Proof Protected
  • Controls up to 4 trailer brakes
See More

Hopkins – 47284, Reliance Plug-In Simple!® Trailer Brake Control (Part No.47284)

47284, Reliance Plug-In Simple!® Trailer Brake Control

from

$78.99
The 47284 brake control utilizes time based actuation for applying braking power to the trailer brakes. The built-in digital display makes it easy for setting braking intensity. The braking force to the trailer can easily be adjusted from 5% to 99% for setting the exact percentage of brake power desired. Most states and provinces require a trailer brake controller based on the weight of the trailer.

Product Features:
  • Time-based braking
  • Mounts at any angle
  • Percentage of braking power shown
  • Plug In Simple Feature
  • Intuitive vertical manual slide
  • Short Proof Protected
  • Controls up to 4 trailer brakes
See More

CURT – Trailer Hitch: 2" Receiver, 5,000 LB Capacity, Installs as low as 30 Mins (Part No.13230)

Trailer Hitch: 2" Receiver, 5,000 LB Capacity, Installs as low as 30 Mins

from

$306.99
Whatever your task at hand — whether it’s launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close — CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Dodge Dakota (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 5,000 lbs. GTW and 500 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 8,000 lbs. WD and 800 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2″ receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.

Product Features:
  • Rated to 5,000 lbs. gross trailer weight and 500 lbs. tongue weight
  • Compatible with weight distribution hitch (8,000 lbs. WD / 800 lbs. WDTW)
  • Engineered with a vehicle-specific design for a custom fit
  • Tested for safety in accordance with SAE J684
  • Precisely welded for superior strength and fit
  • Protected by a durable high-gloss black powder coat finish
  • Co-cured in a rust-resistant liquid A-coat, inside and out
  • Equipped with an open-back receiver for easy cleaning
  • Made in USA (may include imported hardware)
See More

CURT – Trailer Hitch: 1-1/4" Receiver, 3,500 LB Capacity (Part No.12923)

Trailer Hitch: 1-1/4" Receiver, 3,500 LB Capacity

from

$209.99
When a custom hitch is not available for your vehicle, CURT offers the multi-fit hitch. Designed to be the ultimate in versatility, CURT universal trailer hitches fit several different vehicle manufacturers, including Chevrolet, Chrysler, Dodge, Ford, GMC, Jeep, Nissan, Oldsmobile, Plymouth, Pontiac and Toyota. The multi-fit hitch is a universally designed alternative to our custom hitches. It provides a more affordable option and flexibility in installation. Very simply, a CURT multi-fit trailer hitch uses a sliding or adjustable frame to match the width of your vehicle’s frame. In general, multi-fit hitches are used on mid-size and full-size pickup trucks and SUVs. This class 2 multi-fit trailer hitch features a gross trailer weight capacity of 3,500 lbs., a tongue weight capacity of 350 lbs. and a 1-1/4″ x 1-1/4″ receiver tube opening, making it an excellent choice for towing smaller utility trailers, boat trailers and popup campers, as well as cargo carriers and bike racks (NOTE: Never exceed the lowest weight capacity of any towing component). It comes with mounting hardware and instructions, and typically requires little or no drilling during installation.

Product Features:
  • Features an adjustable frame to fit a variety of vehicles
  • Tested for safety in accordance with SAE J684
  • Precisely welded for superior strength and fit
  • Requires little or no drilling on most models
  • Protected by a durable high-gloss black powder coat finish
  • Equipped with an open-back receiver for easy cleaning
See More

Hopkins – Brake Control Connector (Part No.47745)

Brake Control Connector

from

$15.49
Reduce your installation time to minutes! Many of today’s tow vehicles come with an O.E.M. connector harness under the dash. This harness simply splices onto the tow vehicle and then plugs into the Hopkins brake control to complete the install.

Product Features:
  • Blunt Cut Wires Allows For Installation Of Any Brake Control
  • 36 in. Wire Length
  • OEM. Connector Plugs Directly Into Tow Vehicle
  • For Vehicles With A Factory Tow Package
  • Includes Step-By-Step Instructions And Diagrams
  • Includes All Necessary Mounting Hardware
  • For Use On Any 12 Volt Negative Ground System
See More

CURT – Brake Controller Harness, Select Ram 1500, 2500, 3500, Dakota, Durango, Aspen (Part No.51332)

Brake Controller Harness, Select Ram 1500, 2500, 3500, Dakota, Durango, Aspen

from

$19.49
A CURT Quick Plug brake controller wiring adapter is one of the fastest and easiest ways to plug your brake controller into your vehicle. It requires no cutting or splicing! Just insert the vehicle-specific plug end into the OEM vehicle’s factory brake controller socket. The other end plugs into your CURT trailer brake controller. Quick Plug harnesses are available for a variety of vehicles and are unique for each vehicle application to provide the easiest possible installation. This particular brake controller harness fits certain years of the Dodge Ram 1500, 2500, 3500, Dakota, Durango and Chrysler Aspen (see application info to verify fitment). CURT Quick Plug harnesses are compatible with most CURT brake controls and can be used as a replacement or for a new control unit installation. They’re also great for towing all types of trailers with electric brakes. For versatile mounting of your trailer brake controller this Quick Plug wire harness measures two feet long. It also features a slit loom sleeve to keep the wires protected against crushing and abrasions. CURT Quick Plug wire plug-in adapters are made with 12-gauge wires for a reliable connection and braking, and come with zip ties to keep the harness contained and out of sight.

Product Features:
  • Allows a CURT trailer brake controller to be plugged into OEM socket
  • Quick plug harness installs with plug-and-play convenience
  • Wire colors match standard brake controller harnesses
  • Includes 24″ of 12 gauge wire for flexible installation
  • Slit-loom sleeve keeps wires contained and protected
See More

CURT – Custom Wiring Harness (4-Way Flat Output) (Part No.55323)

Custom Wiring Harness (4-Way Flat Output)

from

$43.99
If your vehicle is not equipped with wiring for towing a trailer, CURT custom wiring is the ideal solution. A custom wiring harness — also called a T-connector — is a simple, plug-and-play electrical device that plugs into your automotive electric system and provides a standard, universal trailer wiring connection. This is done using two or more vehicle-specific, OEM-compatible connectors to plug into the taillight assembly, eliminating the need for cutting, splicing and soldering during installation. Custom wiring harnesses are made vehicle-specific, and while they are not available for all vehicles, they do offer one of the fastest, easiest and most secure ways to wire a vehicle for towing. This particular plug-in harness provides a 4-way flat connector socket and is designed to be a custom wiring harness to fit certain years of the Dodge Caravan, Dodge Grand Caravan, Dodge Dakota, Chrysler Town and Country, Mitsubishi Raider and Plymouth Grand Voyager (to verify your vehicle compatibility, see application info). It comes with all necessary wiring components to establish a reliable trailer wiring connection, as well as a dust cover to keep the connector clean when not in use. You have a picture in mind of your next destination — maybe it’s the boat landing at your favorite fishing spot, maybe it’s a campsite that overlooks one of nature’s masterpieces, or maybe it’s the next big jobsite. However, turning that picture into a reality takes more than just daydreaming. It takes a solid connection and the right amount of power. CURT custom wiring is made with some of the most sophisticated technology in the industry and is designed to install with ease, giving you a long-lasting electrical connection for your towing hitch setup.

Product Features:
  • Plugs into vehicle tail light assembly to provide a 4-way flat socket
  • Simple plug-and-play design eliminates the need for cutting or splicing
  • 4-way flat output connects tail lights, brake lights and turn signals
  • Dust cover included to keep connector clean when not in use
See More

CURT – 7ft. Custom Wiring Harness Extension (Adds 7-Way RV Blade to Truck Bed) (Part No.56071)

7ft. Custom Wiring Harness Extension (Adds 7-Way RV Blade to Truck Bed)

from

$98.99
There is nothing like the luxury and power that go along with heavy-duty towing. 5th wheel RVs offer a deluxe, home-away-from-home experience unlike any other, while gooseneck trailers possess a strength that far surpasses most other trailer options. As with any trailer, however, 5th wheels and goosenecks must be equipped with the proper lighting and electrical systems, and tend to require even more complex connectors than a standard receiver-type trailer setup. Make things simple with a CURT 5th wheel / gooseneck extension harness. These wiring harnesses are designed to put an extra connector socket in the bed of your pickup truck while still retaining power to the rear connector socket mounted on your bumper. This is done by plugging into the back of the existing original equipment (OEM) harness and routing through the body of the truck to a hole in the truck bed, providing a connector that is ready to accommodate your 5th wheel or gooseneck trailer. This CURT extension harness is designed to work with 7-way RV blade connectors and comes in a length of 7′. It is compatible with certain years of the Dodge Ram 1500, 2500, 3500 and Dakota (see application to verify fitment). When you need a towing electrical solution that allows you to switch back and forth between your receiver hitch and specialized trailer hitch, CURT gets you plugged in.

Product Features:
  • Routes a 7-way RV blade socket into truck bed while retaining use of rear socket
  • Simple plug-and-play design eliminates the need for cutting or splicing
  • Allows for easy connection of 5th wheel or gooseneck wiring
  • 7-way connects tail, brake, reverse, turn signals, brakes and auxiliary power
  • 7′ extension with right-angle plug for easy installation
  • Spring-loaded dust cover keeps connector clean when not in use
  • Slit loom keeps wires contained and well protected
See More

CURT – Custom Wiring Harness (4-Way Flat Output) (Part No.55317)

Custom Wiring Harness (4-Way Flat Output)

from

$43.49
If your vehicle is not equipped with wiring for towing a trailer, CURT custom wiring is the ideal solution. A custom wiring harness — also called a T-connector — is a simple, plug-and-play electrical device that plugs into your automotive electric system and provides a standard, universal trailer wiring connection. This is done using two or more vehicle-specific, OEM-compatible connectors to plug into the taillight assembly, eliminating the need for cutting, splicing and soldering during installation. Custom wiring harnesses are made vehicle-specific, and while they are not available for all vehicles, they do offer one of the fastest, easiest and most secure ways to wire a vehicle for towing. This particular plug-in harness provides a 4-way flat connector socket and is designed to be a custom wiring harness to fit certain years of the Dodge D100, D150, D250, D350, Ram 50, Ramcharger, W100, W150, W250, W350, Dakota, B250 and Dodge Ram 1500, 2500 and 3500 (to verify your vehicle compatibility, see application info). It comes with all necessary wiring components to establish a reliable trailer wiring connection, as well as a dust cover to keep the connector clean when not in use. You have a picture in mind of your next destination — maybe it’s the boat landing at your favorite fishing spot, maybe it’s a campsite that overlooks one of nature’s masterpieces, or maybe it’s the next big jobsite. However, turning that picture into a reality takes more than just daydreaming. It takes a solid connection and the right amount of power. CURT custom wiring is made with some of the most sophisticated technology in the industry and is designed to install with ease, giving you a long-lasting electrical connection for your towing hitch setup.

Product Features:
  • Plugs into vehicle tail light assembly to provide a 4-way flat socket
  • Simple plug-and-play design eliminates the need for cutting or splicing
  • 4-way flat output connects tail lights, brake lights and turn signals
  • Dust cover included to keep connector clean when not in use
See More

Hopkins – 42145, Multi-Tow® DODGE 7 Blade and 4 Flat Wiring Kit (Part No.42145)

42145, Multi-Tow® DODGE 7 Blade and 4 Flat Wiring Kit

from

$40.99
Tow more than one trailer? Multi-Tow® design feature adds multiple towing options from one connector by providing sockets for towing both 7 blade and 4 flat trailers. This connector is Plug-In Simple!® with no cutting or splicing, saving you time by utilizing an OEM connector to create an exact fit for maximum weatherproofing.

Product Features:
  • Plug-In Simple!® Wiring Kit
  • Utilizes OEM connectors for enhanced fit and weatherproofing
  • Multi-Tow® provides multiple towing options from one connector
  • Corrosion resistant terminals
  • Impact and corrosion resistant
  • Includes dust cover and grease packet to prevent corrosion
  • Includes Step-By-Step Instructions
See More

Carquest Premium – Trailer Connector Kit (Part No.TCC1342)

Trailer Connector Kit

from

$51.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

CURT – Custom Wiring Harness (4-Way Flat Output; OEM Tow Package Required) (Part No.55381)

Custom Wiring Harness (4-Way Flat Output; OEM Tow Package Required)

from

$42.99
If your vehicle is not equipped with wiring for towing a trailer, CURT custom wiring is the ideal solution. A custom wiring harness — also called a T-connector — is a simple, plug-and-play electrical device that plugs into your automotive electric system and provides a standard, universal trailer wiring connection. This is done using two or more vehicle-specific, OEM-compatible connectors to plug into the taillight assembly, eliminating the need for cutting, splicing and soldering during installation. Custom wiring harnesses are made vehicle-specific, and while they are not available for all vehicles, they do offer one of the fastest, easiest and most secure ways to wire a vehicle for towing. This particular plug-in harness provides a 4-way flat connector socket and is designed to be a custom wiring harness to fit certain years of the Chrysler Aspen and Pacifica, Dodge Dakota, Durango, Dodge Ram 2500, 1500 Van, 2500 Van, Dodge Sprinter 2500 and 3500, Jeep Commander, Grand Cherokee and Liberty and Mitsubishi Raider (to verify your vehicle compatibility, see application info). It comes with all necessary wiring components to establish a reliable trailer wiring connection, as well as a dust cover to keep the connector clean when not in use. You have a picture in mind of your next destination — maybe it’s the boat landing at your favorite fishing spot, maybe it’s a campsite that overlooks one of nature’s masterpieces, or maybe it’s the next big jobsite. However, turning that picture into a reality takes more than just daydreaming. It takes a solid connection and the right amount of power. CURT custom wiring is made with some of the most sophisticated technology in the industry and is designed to install with ease, giving you a long-lasting electrical connection for your towing hitch setup.

Product Features:
  • Plugs into vehicle tail light assembly to provide a 4-way flat socket
  • Simple plug-and-play design eliminates the need for cutting or splicing
  • 4-way flat output connects tail lights, brake lights and turn signals
  • Dust cover included to keep connector clean when not in use
See More

Carquest Premium – Trailer Connector Kit (Part No.TCC1251)

Trailer Connector Kit

from

$78.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Trailer Connector Kit (Part No.TCC1282)

Trailer Connector Kit

from

$69.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Trailer Connector Kit (Part No.TCC1199)

Trailer Connector Kit

from

$49.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

CURT – Custom Wiring Harness (4-Way Flat Output) (Part No.55329)

Custom Wiring Harness (4-Way Flat Output)

from

$55.99
If your vehicle is not equipped with wiring for towing a trailer, CURT custom wiring is the ideal solution. A custom wiring harness — also called a T-connector — is a simple, plug-and-play electrical device that plugs into your automotive electric system and provides a standard, universal trailer wiring connection. This is done using two or more vehicle-specific, OEM-compatible connectors to plug into the taillight assembly, eliminating the need for cutting, splicing and soldering during installation. Custom wiring harnesses are made vehicle-specific, and while they are not available for all vehicles, they do offer one of the fastest, easiest and most secure ways to wire a vehicle for towing. This particular plug-in harness provides a 4-way flat connector socket and is designed to be a custom wiring harness to fit certain years of the Dodge Ram 1500, 2500, 3500 and Dakota (to verify your vehicle compatibility, see application info). It comes with all necessary wiring components to establish a reliable trailer wiring connection, as well as a dust cover to keep the connector clean when not in use. You have a picture in mind of your next destination — maybe it’s the boat landing at your favorite fishing spot, maybe it’s a campsite that overlooks one of nature’s masterpieces, or maybe it’s the next big jobsite. However, turning that picture into a reality takes more than just daydreaming. It takes a solid connection and the right amount of power. CURT custom wiring is made with some of the most sophisticated technology in the industry and is designed to install with ease, giving you a long-lasting electrical connection for your towing hitch setup.

Product Features:
  • Plugs into vehicle tail light assembly to provide a 4-way flat socket
  • Simple plug-and-play design eliminates the need for cutting or splicing
  • 4-way flat output connects tail lights, brake lights and turn signals
  • Dust cover included to keep connector clean when not in use
See More

Hopkins – Vehicle Wiring Kit (Part No.42205)

Vehicle Wiring Kit

from

$54.99
Dont splice onto your vehicles factory wiring harness. Simply plug in this Hopkins® vehicle wiring kit featuring exact OEM matching connectors for a perfect weather-tight fit. This kit includes the accessories needed to get you towing faster.

Product Features:
  • Plug-In Simple® Wiring Kit
  • Utilizes OEM Connectors For Enhanced Fit And Weatherproofing
  • Includes Vehicle Side 4 Flat
  • Corrosion Resistant Terminals
  • Impact And Corrosion Resistant
  • Includes Dust Cover And Grease Packet To Prevent Corrosion
  • Includes Step-By-Step Instructions
See More

Hopkins – 48035, 4 Flat Vehicle Side Towing Connector (48") (Part No.48035)

48035, 4 Flat Vehicle Side Towing Connector (48")

from

$7.99
Get your vehicle ready to tow the most common type of trailer on the road by installing this vehicle side 4 flat. This 4 flat connector carries the trailer’s basic lighting and includes printed wire functions that make installation quick.

Product Features:
  • 48 inch length
  • Corrosion Resistant Terminals
  • Most Commonly Used Trailer Connector
  • Found On Small Boat/Utility
  • Printed wire functions for easy wire reference
  • Printed Wire Functions For Easy Wire Reference
  • 100 Percent Tested
See More

Carquest Premium – Trailer Connector Kit (Part No.TCA1207)

Trailer Connector Kit

from

$12.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

2010 Dodge Dakota Towing Products

You count on your 2010 Dodge Dakota to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Towing Products. With 15 Towing Products ranging in price from $15.49 to $306.99, you’re sure to find everything you need for your 2010 Dodge Dakota.

Brands matter. If you want to shop a specific Towing Products brand, we stock 4 different brands like Hopkins, CURT, and Husky. 2010 Dodge Dakota Towing Products start as low as $15.49!

One of the best ways to find top quality OEM or aftermarket Towing Products is by asking professionals. Short of that, you can shop with confidence thanks to our 89 extensive product reviews on 2010 Dodge Dakota Towing Products.

Did we mention you can order your Towing Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Towing Products inventory for your 2010 Dodge Dakota below to get started!

Top-Rated Towing Products Brands For Your 2010 Dodge Dakota

Trusted Towing Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2010 Dodge Dakota running right for years to come. In our inventory you’ll find brands like Hopkins, CURT, Husky, and even more.

Popular CURT Towing Products

You’ll find popular CURT brand products across Trailer Wiring. All are waiting to get your 2010 Dodge Dakota back on the road. Some of the top-rated CURT products in these categories are:

FAQs for 2010 Dodge Dakota Towing Products

What are the most purchased Towing Products for the 2010 Dodge Dakota?

Out of 15 Towing Products for the 2010 Dodge Dakota, the most popular in our inventory are:
42145, Multi-Tow® DODGE 7 Blade and 4 Flat Wiring Kit
from $40.99
This product is not rated
42145, Multi-Tow® DODGE 7 Blade and 4 Flat Wiring Kit
Trailer Wiring Kits
47297, InSIGHT Plug In Simple!® Trailer Brake Control
from $124.99
This product is not rated
47297, InSIGHT Plug In Simple!® Trailer Brake Control
Trailer Brake Controls
Trailer Hitch: 2" Receiver, 5,000 LB Capacity, Installs as low as 30 Mins
from $169.99
This product is not rated
Trailer Hitch: 2" Receiver, 5,000 LB Capacity, Installs as low as 30 Mins
Trailer Hitch – Class V