2010 Dodge Challenger Ignition and Tune-Up Products

Essential 2010 Dodge Challenger Ignition and Tune-Up Products

NGK – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.48715)

Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece

from

$74.99
NGK ignition coils are manufactured to meet or exceed OE standards for the highest durability and operational performance, so they can be installed with confidence. NGK and their family of automotive products have over 80 year’s experience and are driven by extreme dedication to innovation, performance and quality. Developed and rigorously tested in our ISO 17025 accredited test lab under the most extreme conditions, NGK’s coil designs will outperform all others – far beyond operational environments a vehicle would actually experience

Product Features:
  • OE QUALITY: Vacuum-sealed premium epoxy resin and thermoplastic coil housings provide superior dielectric strength, voltage insulation and durability
  • OPTIMAL PERFORMANCE: Precision coil windings and laminations maximize outputs, custom NGK ASIC chipset optimizes efficiency, prevents component damage
  • EASE OF INSTALLATION: NGK Ignition Coils include ignition control module, premium high temperature coil boot, and jumper harnesses where required
  • THE NGK DIFFERENCE: Featuring superior materials and design enhancements.
  • EXTENSIVE TESTING: NGK ignition coils must pass extreme testing during manufacturing to ensure the highest quality and durability standards are met
  • PRODUCT ENGINEERING: Advanced flow and stress modeling systems preemptively identify and avoid common failure points found in OE and competitor coils
See More

Carquest – Ignition Coil (Part No.E1004)

Ignition Coil

from

$45.05
BWD® is an aftermarket leader, providing a premium line of engine management products. BWD® manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD® is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:
  • Integrated A/D converter and digital signal processing with a dynamically adaptive switch point improves accuracy and operation
  • Advanced circuitry protects the system from stray electro-magnetic fields and power spikes
  • Custom magnetic circuit programming calibrates the sensor while performance testing for improved timing accuracy between the target wheel and sensor output
  • Internal core made from grain-oriented electrical steel limits loss factor within magnetic circuit to reduce heat that may reduce coil endurance
  • External core made from oriented silicon steel ensures durability and longevity
  • Samarium-Cobalt (SmCo) magnet produces max high voltage output at all speeds
  • Stainless steel spring resists corrosion
  • Tin-plated brass terminals improve electrical contact and protect against corrosion
See More

Carquest Premium – Spark Plug Wire Set: 5 Wires, Increased performance, Designed for direct fit (Part No.35-4004)

Spark Plug Wire Set: 5 Wires, Increased performance, Designed for direct fit

from

$24.99
Product Features:
  • SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
  • Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
  • 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
  • EPDM inner insulation stops power-robbing voltage leaks.
  • With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
  • Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
  • Excellent interference suppression and consistent performance
  • Easy lock terminals for more convenient installation.
  • Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
  • Broad coverage available for most vehicles on the road today
  • Include grease pack to ensure easy installation and removal
See More

Carquest Premium – Coil On Plug Insulator Boot: Spring included, Designed for direct fit (Part No.35-7018)

Coil On Plug Insulator Boot: Spring included, Designed for direct fit

from

$7.49
CARQUEST Premium coil on plug boots are engineered to restore ignition boot reliability and performance. We have OE design providing an exact direct fit for your application and the performance and durability meet or exceed OE requirements. It offers excellent heat resistance as well as maximum protection against spark loss. With durable silicone compound for resistance to high heat or abrasion.

Product Features:
  • Provides excellent heat resistance as well as maximum protection against spark loss.
  • Durable silicone compound for resistance to high heat or abrasion
  • Spring included with the coil boot
  • Design for direct compatibility
  • OE design provides an exact fit for your application
  • Multipack provides one time replace all COP for better deal
See More

Accel – High-Performance Dual Plug Ignition Coil Kit for Hemi Engines (Part No.140038-8)

High-Performance Dual Plug Ignition Coil Kit for Hemi Engines

from

$599.99
ACCEL Super Coils feature advanced bobbin technology, highly specialized silicon magnetic steel cores, optimized windings, proper resistance and engineered turn ratios that deliver a high performance, quality coil. Specialized high temperature epoxy resists shock and vibration, while increasing thermal conductivity. These are direct high performance replacements for OEM coils.

Product Features:
  • Advanced Bobbin Technology
  • Optimized Low Resistance
  • Silicon Magnetic Steel E-Core
  • Higher Energy/Voltage Outputs
  • Quicker Starts
  • Improved Idle Quality
  • Resists Shock And Vibration
  • Resists Corrosion
  • 8 Pack
See More

Accel – Coil:Hemi Dual Plug 8Pk-Black (Part No.140038K-8)

Coil:Hemi Dual Plug 8Pk-Black

from

$599.99
Now you can have ACCEL late model Supercoils in additional colors Blue and Black! These are the same high quality high output coils ACCEL has been offering in yellow for years. Only now, you have different colors to choose from. In addition to the ever popular ACCEL yellow, Ford Coyote and 3.5/3.7L applications are now available in black or blue while the HEMI and LS versions are available in black! ACCEL Supercoils feature advanced bobbin technology, highly specialized silicon magnetic steel cores, optimized windings, proper resistance and engineered turn ratios that help to unleash your engines maximum horsepower potential.

Product Features:
  • These coils feature advanced bobbin technology
  • Highly specialized silicone magnetic steel cores with optimized windings
  • Specialized high temperature epoxy filled housings resists shock, vibration, chemicals, and overall engine bay environment
  • Molded bodies have high dielectric strength
  • Installation usually takes less than an hour
  • Direct OEM replacement
  • ODB II compatible ¿ will not trip an engine code
  • ODB II compatible ┐ will not trip an engine code
See More

Carquest Premium – Ignition Switch (Part No.CSA5017)

Ignition Switch

from

$42.99
Ignition Switch

Carquest Premium – Ignition Switch (Part No.CSA2211)

Ignition Switch

from

$96.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Spark Plug Wire Set: 7 Wires, Increased performance, Designed for direct fit (Part No.35-6314)

Spark Plug Wire Set: 7 Wires, Increased performance, Designed for direct fit

from

$27.99
Product Features:
  • SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
  • Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
  • 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
  • EPDM inner insulation stops power-robbing voltage leaks.
  • With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
  • Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
  • Excellent interference suppression and consistent performance
  • Easy lock terminals for more convenient installation.
  • Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
  • Broad coverage available for most vehicles on the road today
  • Include grease pack to ensure easy installation and removal
See More

Accel – Universal Fit Super Stock 8mm Suppression; Spark Plug Wire Set (Part No.4040K)

Universal Fit Super Stock 8mm Suppression; Spark Plug Wire Set

from

$65.99
These ACCEL wire sets are a true performance upgrade replacement for OE types. Efficient delivery of spark energy for a good price. Silicone boots with black wire contain zinc-plated steel terminals. Noise suppression core. Set contains 8 plug wires with coil lead.

Product Features:
  • 7mm And 8mm High Gloss Silicone Jacket
  • 450° F Rated Silicone Jacket
  • Stainless Steel Plug Terminals
  • RFI Suppression For Street Driven Applications
  • Custom-fit Universal And Import Coverage
  • High-strength Fiberglass Braid Construction
See More

Carquest Premium – Ignition Coil Connector (Part No.PTC1187)

Ignition Coil Connector

from

$48.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – Ignition Coil Connector (Part No.PTA2995)

Ignition Coil Connector

from

$71.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

E3 – Ultra-High Output HEMI Coil, Chrysler (2006-Current) (Part No.E3.614)

Ultra-High Output HEMI Coil, Chrysler (2006-Current)

from

$54.99
One of the nastiest production engines to come out of Detroit in the last twenty years has to be the late model Hemi and it can get even nastier with the addition of the ultra-high output E3.614 Hemi Coil. With more than double the energy output of a stock coil, E3s Hemi coil features a stainless steel spark plug contact ring and optimized resistance and inductance values which increase output at higher RPM levels. Our high temperature epoxy resists shock and vibration while providing excellent thermal conductivity ensuring extra-long life. Additionally, the spark plug boots are molded in a special high temperature 550 degree F silicone compound. Ideally suited for a wide range of both naturally aspirated and forced induction racing applications, E3.614 fits 5.7L, 6.1L, and 6.4L Hemi engines from 2006 to current model years. When coupled with an E3 Spark Plug featuring DiamondFIRE Technology, youll experience tire shredding power at its finest.

Product Features:
  • Double the energy output of a stock coil
  • High temperature expoxy provides excellent thermal conductivity and long life
  • Stainless steel spark plug contact ring and optimized resistance and inductance provide high output at higher RPM levels
  • Fits 5.7L, 6.1L and 6.4L 2006-Current Hemi engines
  • Crosses to MSD 8255
See More

Delphi – Knock Sensor (Part No.AS10266)

Knock Sensor

from

$23.99
Manufactured to meet or exceed OE requirements; Delphi Knock Sensors help maximize engine performance with all fuels; Delphi Knock Sensors prevent against engine damage from pre-ignition knocking.

Product Features:
  • Flat frequency response allows the same sensor to be used on different engines and the sensor responds to knock frequencies higher than the primary frequency
  • Delphi knock sensors prevent against engine damage from pre-ignition knocking
  • Calibrated for a wide variety of frequencies to detect shifts, and adjust to provide accurate signals to help maximize engine performance
  • Flat frequency response allows the same sensor to be used on different engines and the sensor responds to knock frequencies higher than the primary frequency
  • Ground-isolated design with 2-wire shielded harness helps protect the sensor signal from electro-magnetic interference (EMI)
  • Self-generating piezoelectric design requires no power to the sensor
See More

Delphi – Knock Sensor (Part No.AS10167)

Knock Sensor

from

$23.29
Manufactured to meet or exceed OE requirements; Delphi Knock Sensors help maximize engine performance with all fuels; Delphi Knock Sensors prevent against engine damage from pre-ignition knocking.

Product Features:
  • Flat frequency response allows the same sensor to be used on different engines and the sensor responds to knock frequencies higher than the primary frequency
  • Delphi knock sensors prevent against engine damage from pre-ignition knocking
  • Calibrated for a wide variety of frequencies to detect shifts, and adjust to provide accurate signals to help maximize engine performance
  • Flat frequency response allows the same sensor to be used on different engines and the sensor responds to knock frequencies higher than the primary frequency
  • Ground-isolated design with 2-wire shielded harness helps protect the sensor signal from electro-magnetic interference (EMI)
  • Self-generating piezoelectric design requires no power to the sensor
See More

MSD Ignition – Wire Set; Black Super Conductor; Chrysler 383-440 HEI for MSD Distributor (Part No.32733)

Wire Set; Black Super Conductor; Chrysler 383-440 HEI for MSD Distributor

from

$175.99
The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

Product Features:
  • Bolt-on Performance
  • Custom Fit For Make And Model Listed
  • Wires Are Pre-Cut To Exact Specifications
See More

MSD Ignition – Wire Set; Super Conductor; Chrysler 318-360; Socket (Part No.31309)

Wire Set; Super Conductor; Chrysler 318-360; Socket

from

$169.99
The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

Product Features:
  • Custom Fit For Make And Model Listed
  • Wires Are Pre-Cut To Exact Specifications
  • Bolt-on Performance
See More

Dorman – Spark Plug Tube Well (Part No.917-005)

Spark Plug Tube Well

from

$6.99
Our Spark Plug Tubes are constructed from high-quality metal. They keep engine oil off the spark plugs, protecting them from damage.

Product Features:
  • Spark Plug Tube Well
  • Spark Plug Tube Well
  • Our Spark Plug Tubes are constructed from high-quality metal. They keep engine oil off the spark plugs, protecting them from damage.
  • Prevents spark plugs from fouling out
  • Replacement helps maintain drivability
See More

Dorman – Help – Start Stop Button (Part No.76830)

Start Stop Button

from

$22.99
This push to start ignition switch button is designed to match the appearance and function of the original button on specified applications, and is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this push to start ignition switch button is made to match the fit and performance of the original button on specific vehicle applications
  • Ideal solution – this button is a reliable replacement for an original part that has failed
  • Durable construction – this button is made from quality components and materials for reliable performance and long service life
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Autolite – Platinum Spark Plug: Fires Cleaner, Easier Starts, Quicker Acceleration (Part No.AP63)

Platinum Spark Plug: Fires Cleaner, Easier Starts, Quicker Acceleration

from

$4.49
Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Designed and engineered in the USA, Autolite Platinum spark plugs provide a center wire platinum firing tip which provides reduced gap erosion, fewer misfires, better performance and increased durability. Consider upgrading to Autolite Double Platinum or Iridium XP spark plugs for increased performance.

Product Features:
  • High nickel alloy side electrode maintains precise gap
  • Full platinum tip assures virtually no gap erosion for long life
  • Necked-down center electrode fires quicker, cleaner with less voltage for easier starts, quicker acceleration and improved fuel economy (as compared to standard plugs)
See More

DENSO – Iridium TT Spark Plug: Ultimate Endurance and Power, 0.4mm Iridium Tip, last 100K+ Miles, IKH16TT (Part No.4703)

Iridium TT Spark Plug: Ultimate Endurance and Power, 0.4mm Iridium Tip, last 100K+ Miles, IKH16TT

from

$10.99
Durability of an OE style plug combined with Power & Torque of high performance.

Product Features:
  • 0.4mm Iridium Center Electrode: World’s Smallest Diameter that maximizes firing potential
  • 0.7mm Needle Tip Ground Electrode: Promotes higher spark energy and less heat quenching
  • DENSO Patented Optimized Iridium-Rhodium Alloy Formula: Highest concentration of Iridium vs. competitors for greater durability
  • DENSO Patented 360 degree laser welding process: Ensuring exceptional quality bond and structural strength with the Iridium Center Electrode
  • Durability of an OE style plug combined with Power & Torque of high performance.
  • Withstands temperatures greater than 4000┬░ Fahrenheit
  • Iridium TT
  • Ultimate Endurance and Power: The DENSO Iridium TT Spark Plug features a 0.7mm Iridium Tip, ensuring over 100,000 miles of uncompromised performance.
  • Advanced Twin-Tip Technology: Developed from Original Equipment Specification Super Ignition Plug (SIP) design, combining a Fine Wire Iridium Center Electrode with a Needle Tip Platinum Ground Electrode.
  • Enhanced Fuel Economy and Lower Emissions: Drive around the Earth over 4 times with improved fuel efficiency and reduced emissions.
  • Premium Materials: Features an Iridium Center Electrode Tip and a Flat Seat Type for optimal performance and durability.
See More

Champion – Copper Plus Spark Plug: Dependable Performance, OE Replacement, REC12MCC4 (Part No.446)

Copper Plus Spark Plug: Dependable Performance, OE Replacement, REC12MCC4

from

$4.99
Dependable Performance, OE Replacement, REC12MCC4. This Champion® spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear. The Copper Plus design ensures dependable performance and durability, while the copper core center electrode allows for accurate control of heat range, extending the spark plug’s life. Built to ISO and SAE standards, it offers superior corrosion resistance and proven performance. The nickel material used for both the center and ground electrode tips further enhances its reliability. With a flat seat type and integrated resistor, this spark plug is engineered for optimal performance and longevity.

Product Features:
  • Copper Plus – Dependable Performance and Durability
  • Copper core center electrode allows for accurate control of heat range for longer life
  • Superior corrosion resistance
  • Built to ISO and SAE standards for proven performance
  • Built to ISO and SAE standards for proven performance
  • Nickel Electrode Tips for Reliability: Both the center and ground electrode tips are made from nickel, enhancing the spark plug’s reliability and performance.
  • Engineered for Optimal Performance: Featuring a flat seat type and integrated resistor, this spark plug is engineered to deliver optimal performance and longevity.
See More

ACDelco – Conventional Nickel Tip Copper Core Spark Plug: Reduces Corrosion & Maximizes Durability (Part No.R45S)

Conventional Nickel Tip Copper Core Spark Plug: Reduces Corrosion & Maximizes Durability

from

$4.99
ACDelco Gold (Professional) Conventional Spark Plugs are a high quality alternative to Original Equipment (OE) parts. These conventional spark plugs are designed for reliability and efficient performance. Their high-quality copper cores and outstanding suppression characteristics deliver reliable performance. They are also available for Marine applications. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional.

Product Features:
  • Black Onyx coating helps reduce corrosion
  • Copper core provides great heat transfer and helps maximize plug durability
  • Available for use in Marine applications
  • Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
  • Premium aftermarket replacement part
  • Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
  • Nickel Center Electrode Tip: Features a nickel center electrode tip for enhanced conductivity and performance.
  • Resistor Type: Equipped with a resistor to help reduce radio frequency interference, ensuring smooth engine operation.
See More

Mahle – Spark Plug Tube Seal (Part No.A8027215858MAH)

Spark Plug Tube Seal

from

$7.90
Mahle Spark Plug tube Seal withstands high and low temperatures to provide a reliable seal with minimal tightening. Spark Plug tube Seals are increasingly produced with profiles and not flat; that is, the gasket surface is provided with beads or lips. Now, instead of the entire gasket surface, only the profile needs to be pressed, that is, the sealing bead or sealing lip, and just a slight amount of bolting force produces sufficient deformation and adaptation.

Product Features:
  • Stays cool at temperature up to 1800F
  • Designed to seal minor surface irregularities
  • No re-torque required
  • Teflon® coating optional
See More

Felpro – Spark Plug Tube Seal Set (Part No.ES 12794)

Spark Plug Tube Seal Set

from

$7.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

2010 Dodge Challenger Ignition and Tune-Up Products

You count on your 2010 Dodge Challenger to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Ignition and Tune-Up Products. With 91 Ignition and Tune-Up Products ranging in price from $3.49 to $647.99, you’re sure to find everything you need for your 2010 Dodge Challenger.

Brands matter. If you want to shop a specific Ignition and Tune-Up Products brand, we stock 18 different brands like Autolite, NGK, and Champion. 2010 Dodge Challenger Ignition and Tune-Up Products start as low as $3.49!

One of the best ways to find top quality OEM or aftermarket Ignition and Tune-Up Products is by asking professionals. Short of that, you can shop with confidence thanks to our 2,507 extensive product reviews on 2010 Dodge Challenger Ignition and Tune-Up Products. Some of the top-rated Ignition and Tune-Up Products products we carry are DiamondFIRE Automotive Spark Plug: More Power, Saves Gas with 4.1 stars and Double Platinum Spark Plug: Platinum Firing, Superior Durability, Longer Life with 4.7 stars.

Did we mention you can order your Ignition and Tune-Up Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Ignition and Tune-Up Products inventory for your 2010 Dodge Challenger below to get started!

Top-Rated Ignition and Tune-Up Products Brands For Your 2010 Dodge Challenger

Trusted Ignition and Tune-Up Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2010 Dodge Challenger running right for years to come. In our inventory you’ll find brands like Autolite, NGK, Champion, and even more.

Popular Driveworks Ignition and Tune-Up Products

You’ll find popular Driveworks brand products across Ignition Coils and Boots. All are waiting to get your 2010 Dodge Challenger back on the road. Some of the top-rated Driveworks products in these categories are:
Coil on Plug Coil
from $38.05
(1)
Coil on Plug Coil
Ignition Coils
Ignition Coil
from $59.05
(10)
Ignition Coil
Ignition Coils

Top-Rated Autolite Iridium Ignition and Tune-Up Products


If Autolite Iridium are what you’re looking for, our inventory holds plenty. We stock Autolite Iridium brand Ignition and Tune-Up Products for your 2010 Dodge Challenger, and some of our most reviewed Autolite Iridium parts include:

FAQs for 2010 Dodge Challenger Ignition and Tune-Up Products

What are the most purchased Ignition and Tune-Up Products for the 2010 Dodge Challenger?

Out of 91 Ignition and Tune-Up Products for the 2010 Dodge Challenger, the most popular in our inventory are:
NGK Iridium IX Spark Plug
from $12.99
(105)
NGK Iridium IX Spark Plug
Spark Plugs

What are the top-rated 2010 Dodge Challenger Ignition and Tune-Up Products?

Top-rated Ignition and Tune-Up Products for your 2010 Dodge Challenger based on customer reviews/ratings are:
DiamondFIRE Automotive Spark Plug: More Power, Saves Gas
from $6.99
(184)
DiamondFIRE Automotive Spark Plug: More Power, Saves Gas
“Easy to install. Car is running bettef”
Double Platinum Spark Plug: Platinum Firing, Superior Durability, Longer Life
from $6.49
(102)
Double Platinum Spark Plug: Platinum Firing, Superior Durability, Longer Life
“Car runs smooth now with better gas mileage”