2010 Dodge Avenger Belts and Hoses

Name: Molded Heater Hose; EPDM Rubber, 21/32 Inch Diameter, 12 Inch Length
Brand: Dayco
SKU: 88488
Price: 15.79 USD

Below you will find various in-demand Dodge Belts and Hoses, components and accessories for your 2010 Avenger. Advance Auto Parts has popular Avenger parts like Serpentine and V Belts, Heater Hoses, Pulleys and more. You’ll also find aftermarket and OEM Belts and Hoses for other Avenger model years including 1998, 1999, 2000, 2008, 2009, 2011, 2012, 2013, 2014 and more. Select a category of 2010 Dodge Avenger Belts and Hoses below and start saving instantly.

Popular 2010 Dodge Avenger Belts and Hoses Categories

Serpentine Belts

Belt Tensioner Assemblies

Idler Pulleys

Serpentine Belt Drive Component Kits

Belt Tensioner Pulleys

Engine Oil Cooler Hoses

Drive Belt Idler Assemblies

Essential Belts and Hoses for 2010 Dodge Avengers

from

$15.79

Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$25.99

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$17.48

Built for passenger cars and light-duty trucks, Dayco’s extensive line of Poly Rib serpentine belts are engineered for high mileage, demanding drives found in today’s vehicles. As the manufacturer of the first original equipment multi-ribbed serpentine belt, Dayco’s commitment to automotive product excellence and innovation is unwavering. The Dayco Poly Rib W Profile serpentine belt is the most innovative advancement in serpentine belt design in more than 30 years. Developed through extensive laboratory and actual road mileage testing, this unique rib profile EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and help eliminate noisy belt conditions. Constructed with aramid-reinforced EPDM compounds, the Dayco W Poly Rib serpentine belt delivers more than just OE-required quality. It delivers the solution to troublesome drive problems.

Product Features:

Constructed with aramid-reinforced EPDM compounds
Engineered to conform to high mileage, worn or misaligned drives
Helps eliminate noisy belt conditions Related Documents: (PDF 63.78 KB)

from

$28.74

The Mitsuboshi Multi Rib (Serpentine) Belt meets or exceeds the vehicle manufacturer’s specifications for durability, fit and quality. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:

OE-Equivalent.
Direct fit for easy installation.
Resistant against wear, oil and heat.

from

$29.99

Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$32.99

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$23.49

Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
Meets Type EC electro-chemical requirements as specified in SAE J1684

from

$15.49

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$117.99

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$1.49

Premium hose constructed for long service life.

Product Features:

Good resistance to high temperatures for extended periods of time, which prolongs service life
Meets SAE 20R3 Standard Wall Class D-2 requirements
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications
CAUTION: Do not use for fuel or oil transfer applications
PLEASE NOTE: Item is priced and sold by the foot. See store for details.

from

$21.99

This pulley is manufactured by Litens Automotive – inventor of the first automatic belt tensioner in 1979 and today the world’s largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material, tolerances, specifications and meets performance and durability requirements. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by the world’s largest Original Equipment supplier of accessory drive tensioners and pulleys.
Heavy Duty Polymer Pulley
Complete assembly including new bolt, dust shield, and spacer.
Glass Reinforced thermoplastic for optimized dimensional control and running surface durability.
Precise dimensional tolerance for smooth operation and long life
Service free sealed ball bearing. Molded-in ball bearing for optimal fit and long life

from

$16.99

This replacement accessory drive belt idler pulley has been engineered to match the function and performance of the original pulley on select vehicle years, makes and models, properly restoring critical vehicle operations.

Product Features:

Direct replacement – this accessory drive belt idler pulley matches the fit and function of the original equipment pulley on specified vehicles.
Restores performance – fixes a failed, squealing or groaning noise from a worn idler pulley
Application specific – reverse engineered from the original design on certain vehicle years, makes and models
Trustworthy quality – backed by team of engineers and quality specialists in the United States

from

$30.49

Product Features:

Improved sealing surface for greater leak resistance
High flexibility for easy installation
Maximum vehicle coverage with minimum inventory
Resistant to heat, oil and ozone
Rated for SAE 20R5 Class D-2 performance
Temperature Range: up to +257 Deg. F (+125 Deg. C)
Note: Gates recommends replacing clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$24.79

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation, the leading cause of hose failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$60.99

This Litens pulley is manufactured by one of the largest original equipment pulley suppliers to ensure proper fit and performance. This pulley is produced for serpentine belt routing applications on Dodge/Chrysler with 2.5L engines (A/C Drive pulley). The heavy duty steel pulley conforms to original equipment material, tolerances, and specifications. This replacement part is made to the O.E. specified design and meets all performance and durability requirements. Pulley is supplied with a new steel washer as well as a new I.D. insert reduction bearing for proper fit and quiet performance. Installation requires re-use of the pulley tightening hardware. Most common O.E. Number – MR315825 Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

from

$23.99

This Litens pulley is manufactured by one of the largest original equipment pulley suppliers to ensure proper fit and performance. This pulley is produced for serpentine belt routing applications and conforms to original equipment material, tolerances, and specifications. This replacement part is made in the U.S.A. to the O.E. specified design and meets all performance and durability requirements. Heavy duty steel construction. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by one of the largest original equipment part suppliers in the world to ensure proper form, fit, and performance.
Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance
Installation instructions included.

from

$102.99

Litens Automotive is the original equipment (O.E.) supplier of this tensioner for Chrysler applications. The Litens replacement part meets all form, fit, and performance characteristics of the original equipment part (with the exception of not having the car manufacturer’s logo or part number applied to the part). This part is manufactured in Canada by Litens to the same exacting specifications as the O.E. part. The tensioner maintains the O.E. round spring technology as well as the internal damping design specified for this application. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
Internal “round spring” technology to provide constant belt tension and alignment throughout its service life. The internal damping design provides quiet, smooth, system performance.
Installation instructions included.
Heavy Duty Polymer Pulley
Professional Mechanics will change this tensioner in about 1 hour.
Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.

from

$70.99

This Litens belt tensioner is manufactured by the original equipment tensioner supplier and meets all form, fit, and performance characteristics of the original equipment part (with the exception of not having the car manufacturer’s logo or part number applied to the part). As with the original equipment part, this replacement tensioner is manufactured in Canada for Chrysler/Dodge. The aftermarket part maintains the belt-stretch indicator built into the original part as well as the cast-in locating pin for precise installation. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
Internal “round spring” technology to provide constant belt tension and alignment throughout its service life. The internal damping design provides quiet, smooth, system performance.
Installation instructions included.
Heavy Duty Polymer Pulley
Professional Mechanics will change this tensioner in about 1 hour.
Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.

from

$134.99

Dayco believes in a systems approach to maintenance and has a full line of serpentine belt kits that have been designed for the most popular light-duty applications, ensuring that whomever is completing the repair has all the parts needed. Dayco’s kit offers everything to service your front-end accessory drive with OE or equivalent components. This can include a premium tensioner with flat spring technology, durable pulley(s) with permanently lubricated bearings, a Dayco ela (stretch) serpentine belt, and the Dayco serpentine belt that provides extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:

Engineered to match OE specifications with unique features that enhance vehicle performance and safety
For vehicles that need a highly engineered drive belt and multiple parts for a thorough and proper repair
Provides all the parts needed in one box, helping simplify installation

from

$48.49

1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.

Product Features:

Engine oil cooler hose
Size: 1/2″ x 12′
Designed for engine oil applications
12′ hose length accommodates most applications

from

$87.99

Metal line kit for engine oil coolers. Routes oil lines past exhaust manifolds.

Product Features:

Metal line kit
For use in engine oil cooler applications
Routes oil lines past exhaust manifolds
Provides protection where standard hoses can fail

from

$117.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$14.49

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$24.62

Radiator Hose

from

$28.49

Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$13.99

Dayco ela (elastic) or stretch belts are specifically designed for two, three, and four point drives that are designed to use self-tensioning belts. Although these belts may look like standard poly rib belts, they are very different. These specially designed elastic belts have self-tensioning capabilities required by specific OE drives. Vehicles that are manufactured with stretch belts must replace them with stretch belts. These belts are not interchangeable with standard constructed belts of their same size. Dayco ela belts utilize a proprietary EPDM construction that is designed to elongate over the fixed pulley system, and then maintain the required belt tension over the life of the belt. The backbone behind the Dayco ela belt is its specially developed polyamide tensile member, which allows for high elongation required for installation, yet provides the proper tension maintenance properties to transmit the accessory loads demanded for the drive. This belt construction incorporates a wear resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion and flexibility to maintain lasting performance. Stretch belts have unique installation instructions depending on the OE application. Installation may require a specialized tool for the application or a simple zip tie. Do not attempt to install by prying the belt on the pulleys. Dayco provides detailed instructions on the reverse side of the sleeve.

Product Features:

Utilizes a proprietary EPDM construction that is designed to elongate over the fixed pulley system, and then maintain the required belt tension over the life of the belt
Specially developed polyamide tensile member, which allows for high elongation required for installation, yet provides the proper tension maintenance properties to transmit the accessory loads demanded for the drive
Incorporates a wear resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion and flexibility to maintain lasting performance
These specially designed elastic belts have self-tensioning capabilities required by specific OE drives designed for a stretch belt

from

$15.49

The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$32.99

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

Upgrade your 2010 Dodge Avenger with Top-Quality Belts and Hoses

When it comes to maintaining or upgrading your 2010 Dodge Avenger, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Dodge or enhancing its overall performance, Belts and Hoses are key to keeping your Avenger functioning at its best. At Advance Auto Parts, we offer a wide selection of 58 Belts and Hoses for the 2010 Dodge Avenger, designed to meet your needs without breaking the bank. From Serpentine and V Belt replacements to Heater Hoses upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 2010 Dodge Avenger at great prices. Our Belts and Hoses inventory for this model ranges from just $0.99 to $134.99, with an average price of $51.64. Our 58 Belts and Hoses in stock come from 12 trusted brands, so you’re sure to find the right part for your 2010 Dodge Avenger without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2010 Dodge Avenger, we stock popular OEM and aftermarket Belts and Hoses from top names like Dayco, Litens, Driveworks, and more. Dayco Belts and Hoses start at just $13.81 and boast an impressive 5 stars average rating from customers. Litens and Driveworks also bring quality to the table, with Belts and Hoses available starting at $16.79, and at an average 5 stars rating. With 1,524 customer reviews and counting, our 2010 Dodge Avenger Belts and Hoses have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2010 Dodge Avenger is always ready to roll. We’re committed to providing you with everything you need to keep your Avenger in top shape, all in one place. Start shopping confidently below for your 2010 Dodge Avenger!

Best-Selling Serpentine and V Belts for 2010 Dodge Avengers

Enhance the driving experience in your Dodge with 23 quality Serpentine and V Belt components, starting at $13.99.

show more show less

from

$31.49

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$27.99

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads
Made in the USA

from

$16.79

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$29.99

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$43.99

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$49.49

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$49.49

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$24.99

Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear & tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:

Designed for the majority of automotive vehicle applications on the road today.
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$13.99

Utilizes a proprietary EPDM construction that is designed to elongate over the fixed pulley system, and then maintain the required belt tension over the life of the belt
Specially developed polyamide tensile member, which allows for high elongation required for installation, yet provides the proper tension maintenance properties to transmit the accessory loads demanded for the drive
Incorporates a wear resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion and flexibility to maintain lasting performance
These specially designed elastic belts have self-tensioning capabilities required by specific OE drives designed for a stretch belt

from

$134.99

Engineered to match OE specifications with unique features that enhance vehicle performance and safety
For vehicles that need a highly engineered drive belt and multiple parts for a thorough and proper repair
Provides all the parts needed in one box, helping simplify installation

from

$83.35

ACDelco Professional, premium aftermarket V-Ribbed Advanced Technology Belts serve as replacement belts for accessory belt drive systems (ABDS) and other serpentine belt applications. They are designed using advanced manufacturing technology and premium EPDM rubber construction to provide customers with superior accessory belt drive systems (ABDS) and new-vehicle-type performance. These premium aftermarket replacement v-ribbed advanced technology belts are manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

Made with temperature and crack resistant EPDM rubber for a long life and quiet, dependable performance
Is the belt of choice by professional technicians, lasting 50% to 60% longer than retail belts (low priced belts sold at car part stores)
Its precision dimension control of rib profile transmits load efficiently throughout the accessory belt drive systems (ABDS) allowing components to operate at optimum levels
Able to operate and accept misalignment in the accessory belt drive systems (ABDS) far greater than other serpentine belts
Its flexible construction allows the belt to withstand billions of topside and backside bends resulting in a long belt life

from

$47.49

Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:

Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
EPDM rubber constructions resist cracking on the rib surface
Meets or exceeds all specifications from the Original Equipment Manufacturer
Tensioner Replacement is Recommended (if equipped)
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$14.29

Dayco ela self-tensioning belts incorporate a wear-resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion & flexibility to maintain lasting performance. The backbone behind the Dayco ela self-tensioning belt is its polyamide tensile member, which allows the high elongation required for installation, yet provides the proper tension maintenance properties to transmit the accessory loads demanded for the drive.

Product Features:

Designed for two- to four-point drives that do not require automatic or manual tensioning.
Provides self-tensioning capabilities required by specific OE drives designed for a stretch’ belt
Elasticity allows for long-lasting performance and proper tension
Elasticityáallows for long-lasting performance and proper tension

from

$40.14

Drive Belt

from

$76.35

Made with temperature and crack resistant EPDM rubber for a long life and quiet, dependable performance
Is the belt of choice by professional technicians, lasting 50% to 60% longer than retail belts (low priced belts sold at car part stores)
Its precision dimension control of rib profile transmits load efficiently throughout the accessory belt drive systems (ABDS) allowing components to operate at optimum levels
Able to operate and accept misalignment in the accessory belt drive systems (ABDS) far greater than other serpentine belts
Its flexible construction allows the belt to withstand billions of topside and backside bends resulting in a long belt life

from

$52.99

Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
EPDM rubber constructions resist cracking on the rib surface
Meets or exceeds all specifications from the Original Equipment Manufacturer
Tensioner Replacement is Recommended (if equipped)
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$27.43

Bando USA has been a leading OE supplier to automotive manufacturers for over 50 years and Bando serpentine belts are original equipment on over 70% of the top 10 selling vehicles in North America. Bando USA will not compromise on critical quality measurements. Bando belts are produced to the same, more precise OE metric size to deliver an exact fit within the millimeter, ensuring a perfect fit every time. In addition to exact metric sizing, Bando USA aftermarket serpentine belts provide true OE performance for its aftermarket belts, as they are produced on the same manufacturing lines as the OE belts. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:

OE-Equivalent.
Direct fit for easy installation.
Resistant against wear, oil and heat.
Strong tensile cords limit stretching.
Supports higher horsepower loads.
Made from high strength synthetic rubber.

from

$52.39

Drive Belt

from

$42.79

Dayco, Drive Belt

from

$28.74

OE-Equivalent.
Direct fit for easy installation.
Resistant against wear, oil and heat.

from

$17.16

OE-Equivalent.
Direct fit for easy installation.
Resistant against wear, oil and heat.

from

$16.18

OE-Equivalent.
Direct fit for easy installation.
Resistant against wear, oil and heat.
Strong tensile cords limit stretching.
Supports higher horsepower loads.
Made from high strength synthetic rubber.

from

$15.99

Carquest Standard serpentine belts are constructed from quality materials to ensure durability and a long lifespan. We design and manufacture each Carquest Standard belt to enhance belt-to-pulley contact, maximizing load-carrying capacity and extending belt life. Our serpentine belts are built with EPDM rubber and treated polyester cord to improve durability and belt life. Carquest Standard belts are the right choice when looking for OE fit, form, and function at a great price.

Product Features:

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch
Meets OE fit, form, and function

Top Picks for 2010 Dodge Avenger Pulleys

Upgrade Dodge Avengers with top-quality Pulleys parts, including 12 OEM and aftermarket selections for your 2010 model.

show more show less

from

$27.49

This Litens pulley is supplied by one of the largest original equipment suppliers in the world and meets all form, fit, and performance characteristics of the original equipment part . Like the Original Equipment pulley, the Litens replacement part is constructed of heavy duty polymer composite for long life and trouble free performance. This pulley is supplied with a new integrated bolt and dust shield to facilitate installation. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by one of the world’s largest Original Equipment suppliers of accessory drive tensioners and pulleys.
Heavy Duty Steel Pulley
Pre-assembled pulleys save installation time and ensure that all components are assembled to original specifications for both installation and performance
Precision steel stamping with close tolerance ball bearing pocket.
Electro-deposited coating (e-coat) for superior corrosion resistance.
Running surface designed and engineered for proper belt tracking.

from

$22.99

This Litens pulley is supplied by one of the largest original equipment suppliers in the world and meets all form, fit, and performance characteristics of the original equipment part . Like the Original Equipment pulley, the Litens replacement part is constructed of heavy duty plastic polymer for long life and trouble free performance. This is pulley assembly is supplied with a new bolt, as well as, front and rear dust shields. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by the Original Equipment supplier of this pulley to original equipment specs and tolerances.
Heavy Duty Polymer Pulley
Pre-assembled pulleys save installation time and ensure that all components are assembled to original specifications for both installation and performance
Glass Reinforced thermoplastic for optimized dimensional control and running surface durability.
Precise dimensional tolerance for smooth operation and long life
Service free sealed ball bearing. Molded-in ball bearing for optimal fit and long life

from

$20.99

Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear & tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:

Designed for the majority of automotive vehicle applications on the road today.
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$21.99

Manufactured by the world’s largest Original Equipment supplier of accessory drive tensioners and pulleys.
Heavy Duty Polymer Pulley
Complete assembly including new bolt, dust shield, and spacer.
Glass Reinforced thermoplastic for optimized dimensional control and running surface durability.
Precise dimensional tolerance for smooth operation and long life
Service free sealed ball bearing. Molded-in ball bearing for optimal fit and long life

from

$18.79

Direct replacement – this accessory drive belt idler pulley matches the fit and function of the original equipment pulley on specified vehicles.
Restores performance – fixes a failed, squealing or groaning noise from a worn idler pulley.
Application specific – reverse engineered from the original design on certain vehicle years, makes and models
Trustworthy quality – backed by team of engineers and quality specialists in the United States

from

$22.29

Direct replacement – this accessory drive belt idler pulley matches the fit and function of the original equipment pulley on specified vehicles.
Restores performance – fixes a failed, squealing or groaning noise from a worn idler pulley
Application specific – reverse engineered from the original design on certain vehicle years, makes and models
Trustworthy quality – backed by team of engineers and quality specialists in the United States

from

$58.17

Acc. Belt Tension Pu

from

$16.99

Direct replacement – this accessory drive belt idler pulley matches the fit and function of the original equipment pulley on specified vehicles.
Restores performance – fixes a failed, squealing or groaning noise from a worn idler pulley
Application specific – reverse engineered from the original design on certain vehicle years, makes and models
Trustworthy quality – backed by team of engineers and quality specialists in the United States

from

$18.91

Acc. Belt Idler Pull

DriveAlign½ Belt Drive Idler/Tensioner Pulley

from

$31.99

Product Features:

Steel and thermoplastic construction designed to tight manufacturing tolerances for high durability and quality performance
Built to last with a superior resistance to dirt, salt, chemicals and other under-hood contaminants
OE-quality fit for virtually every domestic or import vehicle on the road today
Bearings meet or exceed OE standards with application-specific speed and load requirements, to withstand high under hood temperatures
Premium bearings eliminate bearing noise
Mounting hardware included for some popular applications
Reliable operation under severe conditions

from

$23.91

Dorman’s Belt Tensioner Pulley is engineered to maintain tension on the serpentine belt for the life of the belt–thereby keeping the alternator charging, the water pump running, and the power steering pump and A/C compressor operating properly. They feature a high-quality double-sealed bearing to resist damage from contaminants. Replacement prevents belt slip and eliminates squeak, squeal or groaning noise associated with a worn belt tensioner pulley.

Product Features:

Steel or plastic construction for long-lasting durability against heat, shock and corrosion
Replacement stops squeak, squeal or groaning noise associated with a worn Belt Tensioner Pulley
Direct replacement for a proper fit every time
Vehicle try-on testing and rigorous materials testing to ensure high-quality performance

from

$13.81

The Dayco Accessory Belt Idler Pulley is a direct fit OEM replacement that contains the same high quality craftsmanship as the original equipment it replaces.

Product Features:

OE-Equivalent and a direct fit application.
Precision bearing
OE High quality pulley assembly
Durable long life performance.

In-Demand Belt Tensioners for 2010 Dodge Avengers

Select from 7 premium Belt Tensioners parts for your 2010 Dodge Avenger, with prices ranging from $46.99 to $102.99.

show more show less

from

$95.99

This Litens tensioner is manufactured by the Original Equipment (O.E.) supplier of this popular tensioner used in Chrysler/Jeep and Mitsubishi vehicles. This “O.E. Exact”* part for the aftermarket meets all original equipment form, fit, and function specifications. *(O.E. Exact – Original Equipment manufacturers prohibits the use of their part number or logo on parts sold to other customers. Therefore, the Litens aftermarket part may have minor cosmetic differences but still be exact in performance and design). This tensioner is equipped with a Steel pulley as well as a Pin-Lock feature to hold the tensioner in the open position during installation. As with the O.E. part, this tensioner is manufactured in Canada for exact performance and fit. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
Internal “round spring” technology to provide constant belt tension and alignment throughout its service life.
Installation instructions included.
Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance
Professional Mechanics will change this tensioner in approx. 1 hour +.
Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.

from

$75.99

This accessory drive belt tensioner assembly is designed to match the fit of an original equipment assembly on specified vehicles. It is engineered to help ensure proper belt tension when an original belt is slipping, broken, or worn from fatigue.

Product Features:

Direct replacement – this accessory drive belt tensioner assembly is designed to match the fit of an original equipment assembly on specified vehicles.
Ideal solution – engineered to help ensure proper belt tension when an original belt is slipping, broken, or worn from fatigue
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$102.99

Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
Internal “round spring” technology to provide constant belt tension and alignment throughout its service life. The internal damping design provides quiet, smooth, system performance.
Installation instructions included.
Heavy Duty Polymer Pulley
Professional Mechanics will change this tensioner in about 1 hour.
Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.

from

$70.99

Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
Internal “round spring” technology to provide constant belt tension and alignment throughout its service life. The internal damping design provides quiet, smooth, system performance.
Installation instructions included.
Heavy Duty Polymer Pulley
Professional Mechanics will change this tensioner in about 1 hour.
Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.

from

$80.30

Acc. Belt Tensioner

from

$70.99

Product Features:

Comprehensive line includes parts to fit cars, vans, SUVs and light trucks, domestic and import (European and Asian)
Manufactured using the same or improved technology and quality materials as the Original Equipment Manufacturer (OEM) part, assuring a factory match
Patented labyrinth seal protects internal components to meet or exceed OE life expectancy requirements
Patented vibration-damping system absorbs extreme vibration to improve tensioner, as well as belt and accessory, life
Torsional round spring design provides reliability as well as consistent tension
Comprehensive line includes parts to fit cars, vans, SUV’s and light/heavy-duty trucks.

from

$46.99

Direct replacement – this accessory drive belt tensioner assembly is designed to match the fit of an original equipment assembly on specified vehicles
Ideal solution – engineered to help ensure proper belt tension when an original belt is slipping, broken, or worn from fatigue
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

Most Sold 2010 Dodge Avenger Engine Cooling Hoses

Explore our best-selling Dodge parts for the 2010 Avenger among 8 OEM and aftermarket options starting from $0.99.

show more show less

from

$28.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$32.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$117.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$117.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$79.99

Modular coolant hoses are on many of today’s vehicles and are much more complex than the standard molded hoses of the past. Modular coolant hoses are hose assemblies with one or more components built into the hose. Some examples of these components include hose branches, quick connectors, valves, sensors, bleeders and flow restrictors. Manufactured identical or equivalent to the OE hose, modular coolant hoses will keep your vehicle’s cooling system running properly and efficiently for years to come.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
EPDM tube: synthetic fiber knit reinforcement, heat-, ozone- and chemical coolant-resistant EPDM cover
Manufactured with OEM-exact hose components (quick connects, branch connectors/tees, sensors, etc.)
Meets SAE 20R3 EC Class D1 under 25mm (1 in.) ID, SAE 20R4 EC Class D1 for 25mm (1 in.) ID and over
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$129.61

Radiator Hose

from

$23.78

Radiator Hose

from

$0.99

Specially engineered stick hose is ideal for straight coolant/air connections in automotive, stationary engine, industrial and home applications.

Product Features:

Heat-resistant cover
Cover marked in 1 in. increments to facilitate approximate cut lengths, allows ┐custom fit installations
Meets SAE 20R1 Standard Wall Class D-2 requirements
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: For a maintenance free connection, use PowerGrip SB clamps
Caution: Do not use for fuel or oil transfer applications

Top-Rated Belts and Hoses Brands For Your 2010 Dodge Avenger

Shop for the best-rated brands offering Belts and Hoses and other products for your 2010 Dodge Avengers. Below you’ll find some of our best rated Belts and Hoses from Dayco, Litens, and Driveworks, and more. Belts and Hoses from these brands that fit a 2010 Avenger start at just $13.81 and are rated as high as 5 stars. OEM and aftermarket Belts and Hoses don’t get more top quality, durable, and affordable than from the brands below.

Popular Dayco 2010 Dodge Avenger Belts and Hoses

When it comes to maintaining or upgrading your 2010 Dodge Avenger, using quality Belts and Hoses is essential to ensure durability and a perfect fit. Dayco ticks all of those boxes. We offer a wide selection of Dayco Belts and Hoses, specifically designed for the 2010 Dodge Avenger. With over 22 Dayco brand Belts and Hoses in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $13.81, with an average price of just $45.19. Plus, with over 465 customer reviews and an average rating of 5 stars, you can trust that our Dayco Belts and Hoses will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$32.99

This product is not rated

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 20.5" Long, 1.38" Diameter

“”

from
$134.99

This product is not rated

Serpentine Belt Kit; With Belt, 2 Pulleys, and Tensioner, 4 Piece Set

“”

from
$28.99

This product is not rated

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 20" Long, 1.38" Diameter

“”

Popular Litens 2010 Dodge Avenger Belts and Hoses

Litens auto parts is one of the highest quality Belts and Hose brands in the market. Any 2010 Dodge Avenger owner should feel confident when installing genuine Litens parts in their vehicle. To ensure the best fit and performance for your 2010 Avenger, Advance Auto Parts carries a full inventory of 6 Litens Belts and Hoses. Plus you will be keeping your Dodge in peak condition while saving money because prices on these Litens Belts and Hoses range from $21.99 to $102.99, plus, with more than 17 customer reviews and an impressive 5 stars average rating, you can be confident the Fram Belts and Hoses below will deliver on both quality and value.

from
$95.99

(7)

Accessory Drive Belt Tensioner – Original Equipment Quality

“Great price and great price!”

from
$21.99

This product is not rated

Idler/Tensioner Pulley: Direct Fit, Thermoplastic, 70mm Diameter

“”

from
$70.99

This product is not rated

Accessory Drive Belt Tensioner – Original Equipment Quality

“”

FAQs for 2010 Dodge Avenger Belts and Hoses

Which Belts and Hoses are best-sellers for 2010 Dodge Avengers?

Out of 58 Belts and Hoses that fit 2010 Dodge Avengers, the following parts are the top sellers:

Serpentine Idler/Tensioner Pulley; Polymer, 65mm Dia., 24.5mm Width, Smooth (99995959) – $20.99
Poly Rib Belt Serpentine Belt; 101.58 Long, 6 Rib Count (20060020) – $31.49
Poly Rib Belt Serpentine Belt; 46.75 Long, 6 Rib Count (20060899) – $27.99

What’s the price range for 2010 Dodge Avenger Belts and Hoses?

Belts and Hose prices for the 2010 Dodge Avenger start at $0.99 and go up to $134.99 for the most premium parts.

What’s the average price of a Belts and Hose for a 2010 Dodge Avenger?

The average price for Belts and Hoses for the 2010 Dodge Avenger is $51.64. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Belts and Hoses for other Dodge Avenger model years?

Yes, we currently carry Belts and Hoses for 12 model years of Dodge Avengers between 1995 and 2014. Belts and Hoses are bought most frequently for the following model years: 2014, 2013, 2012, 2011, 2009, 2008, 2000, 1999, and 1998.

What are the cheapest Belts and Hoses for my 2010 Dodge Avenger?

The cheapest 2010 Dodge Avenger Belts and Hoses we carry in stock are:

Vulco« Straight Coolant Hose (10520964) – $0.99
Dayco, Acc. Belt Tension Pulley (11884746) – $13.81
Stretch Serpentine Belt: 36.1 "Long, 4 Rib Count, Engineered For High Mileage (10114253) – $13.99
Stretch Serpentine Belt; 36.93 Long, 4 Rib Count, Zip Tie Required (12482939) – $14.29
Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 5 1/4 Inch Length (19590273) – $15.49

What are the top-rated Belts and Hoses that fit the 2010 Dodge Avenger?

Out of 1,524 reviews by customers, our 2010 Dodge Avenger Belts and Hoses have an average customer rating of . These are some of the highest-rated Belts and Hose types for the 2010 Dodge Avenger and their top-rated products:

Radiator Hoses
- Curved Radiator Hoses: EPDM Rubber, Standard Duty, 30" Long, 1.38" Diameter (10574382) – $117.99
- Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 5 1/4 Inch Length (19590273) – $15.49
- Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 18 Inch Length (5198399) – $23.49
Serpentine and V Belts
- Curved Radiator Hoses: EPDM Rubber, Standard Duty, 30" Long, 1.38" Diameter (10574382) – $117.99
- Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 5 1/4 Inch Length (19590273) – $15.49
- Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 18 Inch Length (5198399) – $23.49
Belt Tensioners
- Curved Radiator Hoses: EPDM Rubber, Standard Duty, 30" Long, 1.38" Diameter (10574382) – $117.99
- Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 5 1/4 Inch Length (19590273) – $15.49
- Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 18 Inch Length (5198399) – $23.49

What types of Belts and Hoses do you sell for my 2010 Dodge Avenger?

As of 2/5/25, these are some of the most in-demand types of Belts and Hoses for a 2010 Dodge Avenger:

Can I get help with 2010 Dodge Avenger Belts and Hose orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Dodge Belts and Hoses and more.

What is your return policy for Dodge Avenger Belts and Hoses?

Advance Auto Parts keeps returns simple. For new Dodge Avenger Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2010 Dodge Avenger Belts and Hoses

Dayco – Molded Heater Hose; EPDM Rubber, 21/32 Inch Diameter, 12 Inch Length (Part No.88488)

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 10 Inch Length (Part No.87679)

Dayco – Dayco, Drive Belt (Part No.W10001221226DAY)

Mitsubishi – Multi-Rib (Serpentine) Belt (Part No.W100088712MBL)

Dayco – Serpentine Idler/Tensioner Pulley; Direct Fit, 70 mm Diameter, 24.9 mm Smooth (Part No.89144)

Dayco – Serpentine Idler/Tensioner Pulley; Steel, 90mm Dia., 25.9mm Width, Smooth (Part No.89097)

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 18 Inch Length (Part No.80402)

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 5 1/4 Inch Length (Part No.87625)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 20.5" Long, 1.38" Diameter (Part No.E72518)

Gates – Straight Heater Hose: EPDM, Direct Fit, 0.625" Inside Diameter (Sold by foot) (Part No.28411)

Litens – Idler/Tensioner Pulley: Direct Fit, Thermoplastic, 70mm Diameter (Part No.900347A)

Dorman – Idler/Tensioner Pulley: Specific Fit, Plastic, 65 mm Diameter (Part No.419-597)

Gates – Vulco-Flex½ II Flexible Coolant Hose (Part No.25251)

Gates – Premium Molded Coolant Hose (Part No.22130)

Litens – Tensioner Pulley: Direct Fit, Steel, 70mm Diameter (Part No.900574A)

Litens – Idler/Tensioner Pulley: Direct Fit, Steel, 90mm Diameter (Part No.900055A)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999811A)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999276A)

Dayco – Serpentine Belt Kit; With Belt, 2 Pulleys, and Tensioner, 4 Piece Set (Part No.5061015K1)

Imperial – 1/2" x 12′ Engine Oil Cooler Hose (Part No.240112)

Imperial – Metal Line Kit for Engine Oil Coolers (Part No.240293)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 30" Long, 1.38" Diameter (Part No.E72624)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 21" Long, 1.38" Diameter (Part No.D71833)

Dayco – Radiator Hose (Part No.G20002149352DAY)

Dayco – Poly Rib Belt Serpentine Belt; 33.86 Long, 4 Rib Count (Part No.5040338)

Dayco – Stretch Serpentine Belt: 36.1 "Long, 4 Rib Count, Engineered For High Mileage (Part No.E040361)

Driveworks – Poly Rib Belt Serpentine Belt; 33.86 Long, 4 Rib Count (Part No.338K4)

Dayco – Poly Rib Belt Serpentine Belt; 51 Long, 5 Rib Count (Part No.5050510)

Driveworks – Poly Rib Belt Serpentine Belt; 101.58 Long, 6 Rib Count (Part No.1015K6)

Dayco – Poly Rib Belt Serpentine Belt; 46.75 Long, 6 Rib Count (Part No.5060468)

Driveworks – Poly Rib Belt Serpentine Belt; 46.75 Long, 6 Rib Count (Part No.468K6)

Dayco – Serpentine Idler/Tensioner Pulley; Direct Fit, 70 mm Diameter, 24.9 mm Smooth (Part No.89144)

Dayco – Poly Rib Belt Serpentine Belt; 101.58 Long, 6 Rib Count (Part No.5061015)

Dayco – Poly Rib Belt Serpentine Belt; 69.5 Long, 6 Rib Count (Part No.5060695)

Driveworks – Poly Rib Belt Serpentine Belt; 69.5 Long, 6 Rib Count (Part No.695K6)

Dayco – Serpentine Idler/Tensioner Pulley; Polymer, 70mm Dia., 24.5mm Width, Smooth (Part No.89133)

Dayco – Stretch Serpentine Belt: 36.1 "Long, 4 Rib Count, Engineered For High Mileage (Part No.E040361)

Dayco – Serpentine Belt Kit; With Belt, 2 Pulleys, and Tensioner, 4 Piece Set (Part No.5061015K1)

ACDelco – Professional V-Ribbed Serpentine Belt (Part No.W1000578668ACD)

Gates – V-Ribbed Serpentine Belt: 102.09" Long, 6 Rib Count, Exact Fit (Part No.K061015)

Dayco – Stretch Serpentine Belt; 36.93 Long, 4 Rib Count, Zip Tie Required (Part No.4PK938EE)

Bando – Drive Belt (Part No.W10002440796BAN)

ACDelco – Professional V-Ribbed Serpentine Belt (Part No.W1000578688ACD)

Gates – Micro-V« Serpentine Drive Belt (Part No.K060695)

Bando – Multi Rib (Serpentine) Belt (Part No.W100088712BAN)

Worldpac – Drive Belt (Part No.W10003384710DAY)

Dayco – Dayco, Drive Belt (Part No.W10001221484DAY)

Mitsubishi – Multi-Rib (Serpentine) Belt (Part No.W100088712MBL)

Mitsubishi – Multi-Rib (Serpentine) Belt (Part No.W100026446MBL)

Bando – Multi Rib (Serpentine) Belt (Part No.W100026446BAN)

Carquest Standard – Serpentine Belt: 46.8" Long, 6 Rib Count (Part No.468K6)

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 10 Inch Length (Part No.87679)

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 10 Inch Length (Part No.87669)

Litens – Idler Pulley: Direct Fit, Thermoplastic, 70mm Diameter, w/ Hardware (Part No.900504A)

Litens – Idler Pulley: Direct Fit, Thermoplastic, 65mm Diameter, w/ Hardware (Part No.900446A)

Dayco – Serpentine Idler/Tensioner Pulley; Polymer, 65mm Dia., 24.5mm Width, Smooth (Part No.89161)

Litens – Idler/Tensioner Pulley: Direct Fit, Thermoplastic, 70mm Diameter (Part No.900347A)

Dorman – Idler/Tensioner Pulley: Specific Fit, Plastic, 70 mm Diameter (Part No.419-725)

Dorman – Idler/Tensioner Pulley: Specific Fit, Plastic, 70 mm Diameter (Part No.419-598)

ACDelco – Acc. Belt Tension Pu (Part No.G6011626120ACD)

Dorman – Idler/Tensioner Pulley: Specific Fit, Plastic, 65 mm Diameter (Part No.419-597)

INA – Acc. Belt Idler Pull (Part No.G6020333017INA)

Gates – DriveAlign½ Belt Drive Idler/Tensioner Pulley (Part No.36313)

Dorman – Acc. Belt Idler Pull (Part No.G6020721705DOR)

Dayco – Dayco, Acc. Belt Tension Pulley (Part No.G60111330434DAY)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999181A)

Dorman – Automatic Belt Tensioner (Tensioner Only) (Part No.419-006)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999811A)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999276A)

INA – Acc. Belt Tensioner (Part No.G6001442562INA)

Gates – DriveAlign½ Automatic Belt Drive Tensioner (Part No.39053)

Dorman – Automatic Belt Tensioner (Tensioner Only) (Part No.419-359)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 20" Long, 1.38" Diameter (Part No.E72579)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 20.5" Long, 1.38" Diameter (Part No.E72476)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 13.5" Long, 1.38" Diameter (Part No.D72519)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 20.5" Long, 1.38" Diameter (Part No.E72518)

Gates – Premium Modular Coolant Hose (Part No.23578)

Gates – Radiator Hose (Part No.G20001345881GAT)

Dayco – Radiator Hose (Part No.G20001557568DAY)