2010 Chrysler PT Cruiser Belts and Hoses
More 2010 Chrysler PT Cruiser Belts and Hoses Categories
If you’re looking for an original Belts and Hoses replacement for a 2010 Chrysler PT Cruiser, you can search through our selection below. You’ll also find aftermarket and OEM Belts and Hoses to meet your needs.
Essential 2010 Chrysler PT Cruiser Belts and Hoses
Bando – Multi Rib (Serpentine) Belt (Part No.W100026289BAN)
from
$13.56
Bando USA has been a leading OE supplier to automotive manufacturers for over 50 years and Bando serpentine belts are original equipment on over 70% of the top 10 selling vehicles in North America. Bando USA will not compromise on critical quality measurements. Bando belts are produced to the same, more precise OE metric size to deliver an exact fit within the millimeter, ensuring a perfect fit every time. In addition to exact metric sizing, Bando USA aftermarket serpentine belts provide true OE performance for its aftermarket belts, as they are produced on the same manufacturing lines as the OE belts. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts
Product Features:
See More
Product Features:
- OE-Equivalent.
- Direct fit for easy installation.
- Resistant against wear, oil and heat.
- Strong tensile cords limit stretching.
- Supports higher horsepower loads.
- Made from high strength synthetic rubber.
Bando – Multi Rib (Serpentine) Belt (Part No.W100027999BAN)
from
$13.81
Bando USA has been a leading OE supplier to automotive manufacturers for over 50 years and Bando serpentine belts are original equipment on over 70% of the top 10 selling vehicles in North America. Bando USA will not compromise on critical quality measurements. Bando belts are produced to the same, more precise OE metric size to deliver an exact fit within the millimeter, ensuring a perfect fit every time. In addition to exact metric sizing, Bando USA aftermarket serpentine belts provide true OE performance for its aftermarket belts, as they are produced on the same manufacturing lines as the OE belts. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts
Product Features:
See More
Product Features:
- OE-Equivalent.
- Direct fit for easy installation.
- Resistant against wear, oil and heat.
- Strong tensile cords limit stretching.
- Supports higher horsepower loads.
- Made from high strength synthetic rubber.
Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 13" Long, 1.34" Diameter (Part No.D72074)
from
$25.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-1 requirements
- Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Provides excellent protection against external elements
Gates – Premium Molded Coolant Hose (Part No.22627)
from
$27.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
Product Features:
See More
Product Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Dayco – Poly Rib Belt Serpentine Belt; 56 Long, 4 Rib Count (Part No.5040560)
from
$25.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.
Product Features:
See More
Product Features:
- Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
- Engineered to help address noise issues caused by the belt drive
- Capable of handling more extreme temperatures and workloads
Driveworks – Poly Rib Belt Serpentine Belt; 51.58 Long, 4 Rib Count (Part No.515K4)
from
$12.79
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.
Product Features:
See More
Product Features:
- Constructed with heat and ozone resistant EPDM rubber
- Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
- Made with treated polyester cord to reduce belt stretch
Gates – Premium Molded Coolant Hose (Part No.24090)
from
$43.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
Product Features:
See More
Product Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 17" Long, 1.25" Diameter (Part No.E72214)
from
$38.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-1 requirements
- Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Provides excellent protection against external elements
Litens – O.E Quality Idler/Tensioner Pulley Direct Fit, Thermoplastic, 70 mm Diameter (Part No.900128A)
from
$36.49
This pulley is manufactured by Litens Automotive – inventor of the first automatic belt tensioner in 1979 and today the world’s largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and conforms to original equipment material and tolerances, specifications and meets performance and durability requirements. This pulley designed for Chrysler/Dodge/Plymouth applications is constructed of high-grade polymer for long life and optimum performance. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket._
Product Features:
See More
Product Features:
- Manufactured by the world’s largest Original Equipment supplier of accessory drive tensioners and pulleys
- Heavy Duty Polymer Pulley
- Glass Reinforced thermoplastic for optimized dimensional control and running surface durability.
- Precise dimensional tolerance for smooth operation and long life
- Service free sealed ball bearing. Molded-in ball bearing for optimal fit and long life
Dorman – Automatic Belt Tensioner (Tensioner Only) (Part No.419-018)
from
$62.99
This accessory drive belt tensioner assembly is designed to match the fit of an original equipment assembly on specified vehicles. It is engineered to help ensure proper belt tension when an original belt is slipping, broken, or worn from fatigue.
Product Features:
See More
Product Features:
- Direct replacement – this accessory drive belt tensioner assembly is designed to match the fit of an original equipment assembly on specified vehicles
- Ideal solution – engineered to help ensure proper belt tension when an original belt is slipping, broken, or worn from fatigue
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Litens – Serpentine Belt Tensioner: 1 Piece (Part No.999524A)
from
$104.99
Litens was the Original Equipment (O.E.) supplier of this Chrysler tensioner and offers this “O.E. Exact”* part for the aftermarket. This “O.E. Exact”* part for the aftermarket meets all original equipment form, fit, and function specifications. *(O..E Exact – Original Equipment manufacturers prohibits the use of their part number or logo on parts sold to other customers. Therefore, the Litens aftermarket part may have minor cosmetic differences but still be exact in performance and design). The pulley-bolt dust shield has been reengineered for the aftermarket product. Choosing The Correct Replacement Part: Both the original equipment and Litens aftermarket tensioner use a round spring versus a flat spring and are marked “Made in Canada”. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket._
Product Features:
See More
Product Features:
- Manufactured by the original equipment part supplier to ensure proper form, fit and performance
- Internal “round spring” technology to provide constant belt tension and alignment throughout its service life.
- Installation instructions included.
- Heavy Duty Glass Reinforced Polymer Pulley for optimized dimensional control and running surface durability
- Professional Mechanics will change this tensioner in approx. 20 minutes.
- Due to the fact that belts and tensioners have similar Original Equipment “design life targets”, it is often a best practice to replace the belt tensioner when replacing a worn or broken belt. Belt removal is required to change the tensioner. Therefore, d
Dayco – Serpentine Belt Tensioner: 1 Piece, HD, Built To Outperform And Outlast OE Parts (Part No.89319)
from
$60.99
The Dayco automatic belt tensioner features Dayco’s original, patented flat spring design to provide less operating range variation. It reduces the risk of premature accessory bearing failure due to high tension and lessens the risk of belt noise and slippage – or poor performance caused by low tension. A PTFE string wound within the spring resists abrasion and dampens noise. Dayco’s tensioner is also designed with a heavy-duty cast aluminum spring case and arm, which helps resist cracking and fatigue and offers additional strength, lessening the risk of distortion. Additional premium thermoplastic rubber spring slot plugs and rubber O-ring seals help keep contaminants out and zinc coated mounting bolts resist rust.
Product Features:
See More
Product Features:
- Endures the toughest conditions while promoting quieter performance and longer life
- Features a steel pivot tube on specific designs for enhanced stability
- Built to outperform and outlast competitive OE parts
Imperial – Metal Line Kit for Engine Oil Coolers (Part No.240293)
from
$79.99
Metal line kit for engine oil coolers. Routes oil lines past exhaust manifolds.
Product Features:
See More
Product Features:
- Metal line kit
- For use in engine oil cooler applications
- Routes oil lines past exhaust manifolds
- Provides protection where standard hoses can fail
Imperial – 1/2" x 12′ Engine Oil Cooler Hose (Part No.240112)
from
$48.49
1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.
Product Features:
See More
Product Features:
- Engine oil cooler hose
- Size: 1/2″ x 12′
- Designed for engine oil applications
- 12′ hose length accommodates most applications
Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 19" Long, 1.34" Diameter (Part No.E71671)
from
$25.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-1 requirements
- Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Provides excellent protection against external elements
Gates – Straight Heater Hose: EPDM, Direct Fit, 0.625" Inside Diameter (Sold by foot) (Part No.28411)
from
$1.49
Premium hose constructed for long service life.
Product Features:
See More
Product Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- CAUTION: Do not use for fuel or oil transfer applications
- CAUTION: Do not use for fuel or oil transfer applications
- PLEASE NOTE: Item is priced and sold by the foot. See store for details.
Dayco – Molded Radiator and Bypass Hose (Part No.G2000368466DAY)
from
$21.17
Designed to replace original equipment manufacturer hose, Dayco Molded Radiator and Bypass Hose are built with knitted reinforcement and EPDM construction which provides high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40F (-40C) to +257F (+125C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. The Dayco Molded Radiator and Bypass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro- chemical requirements as specified in SAE J1684.
Product Features:
See More
Product Features:
- Made with synthetic EPDM rubber compounds that provide resistance to deterioration from ozone, coolants, and temperature variations of -40F (-40C) to +257F (+125C)
- The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose
- Meets SAE J20R4, Class D-1 requirements for improved service hose
- Meets Type EC electro-chemical requirements as specified in SAE J1684; which eliminates premature deterioration of the inner tube caused by the build up of static electric charges
- Limited Three Year Warranty
Dayco – Serpentine Idler/Tensioner Pulley; Polymer, 84mm Dia., 20mm Width, 4 Grooves (Part No.89524)
from
$62.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.
Product Features:
See More
Product Features:
- Designed for the majority of automotive vehicle applications on the road today
- High-quality materials help resist wear and improve belt life
- Features premium lubricated bearings to extend service life
- Meets or exceeds OE quality
Dayco – Serpentine Idler/Tensioner Pulley; Direct Fit, 70 mm Diameter, 19.03 mm Smooth (Part No.89147)
from
$37.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong pl
Product Features:
See More
Product Features:
- Designed for the majority of automotive vehicle applications on the road today
- High-quality materials help resist wear and improve belt life
- Features premium lubricated bearings to extend service life
- Meets or exceeds OE quality
Dorman – Help – PCV Intake Hose (Part No.46039)
from
$24.99
Proper crankcase ventilation is key to smooth performance and engine longevity. Made from quality materials to resist cracking and brittleness, this PCV hose replaces a worn or leaking original equipment hose.
Product Features:
See More
Product Features:
- Ideal replacement – this PCV tubing replaces the original tubing on specified vehicle years, makes and models
- Durable materials – this PCV tubing is designed to withstand exposure to extreme temperatures and oil vapors to resist cracking and leaking
- Cost-effective solution – offers original equipment quality at a competitive price
- Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life
Dorman – Help – PCV Intake Hose (Part No.46039CD)
from
$24.99
Proper crankcase ventilation is key to smooth performance and engine longevity. Made from quality materials to resist cracking and brittleness, this PCV hose replaces a worn or leaking original equipment hose.
Product Features:
See More
Product Features:
- Ideal replacement – this PCV tubing replaces the original tubing on specified vehicle years, makes and models
- Durable materials – this PCV tubing is designed to withstand exposure to extreme temperatures and oil vapors to resist cracking and leaking
- Cost-effective solution – offers original equipment quality at a competitive price
- Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life
Dorman – Molded Heater Hose: Steel/Rubber (Part No.626-559)
from
$163.99
This replacement HVAC heater hose assembly is engineered to match the fit and durability of the stock heater hose assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.
Product Features:
See More
Product Features:
- Ideal replacement – this HVAC heater hose assembly directly replaces the original heater hose on specified vehicle years, makes and models
- Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
- Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
- Industry-leading design – professionally engineered by the aftermarket leader in heater hose assemblies
Dayco – Molded Heater Hose; EPDM Rubber, 19/32 Inch Diameter, 12 Inch Length (Part No.87763)
from
$35.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.
Product Features:
See More
Product Features:
- Meets the requirements of SAE J20R3, Class D-1
- Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Engineered as an OEM replacement
- The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 12 Inch Length (Part No.87656)
from
$14.49
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.
Product Features:
See More
Product Features:
- Meets the requirements of SAE J20R3, Class D-1
- Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Engineered as an OEM replacement
- The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
Popular 2010 Chrysler PT Cruiser Belts and Hoses Categories
2010 Chrysler PT Cruiser Belts and Hoses
You count on your 2010 Chrysler PT Cruiser to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Belts and Hoses. With 27 Belts and Hoses ranging in price from $12.77 to $163.99, you’re sure to find everything you need for your 2010 Chrysler PT Cruiser.
Brands matter. If you want to shop a specific Belts and Hoses brand, we stock 7 different brands like Dayco, Driveworks, and Litens. 2010 Chrysler PT Cruiser Belts and Hoses start as low as $12.77!
One of the best ways to find top quality OEM or aftermarket Belts and Hoses is by asking professionals. Short of that, you can shop with confidence thanks to our 228 extensive product reviews on 2010 Chrysler PT Cruiser Belts and Hoses. Some of the top-rated Belts and Hoses products we carry are PCV Intake Hose with 3.7 stars and Serpentine Belt Tensioner: 1 Piece with 4.0 stars.
Did we mention you can order your Belts and Hoses from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Belts and Hoses inventory for your 2010 Chrysler PT Cruiser below to get started!
Top-Rated Belts and Hoses Brands For Your 2010 Chrysler PT Cruiser
Trusted Belts and Hoses OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2010 Chrysler PT Cruiser running right for years to come. In our inventory you’ll find brands like Dayco, Driveworks, Litens, and even more.
Popular Dayco Belts and Hoses
You’ll find popular Dayco brand products across Belt Tensioners and Serpentine and V Belts. All are waiting to get your 2010 Chrysler PT Cruiser back on the road. Some of the top-rated Dayco products in these categories are:
from
$60.99
(1)
Serpentine Belt Tensioner: 1 Piece, HD, Built To Outperform And Outlast OE Parts
Belt Tensioner Assemblies
from
$37.99
(14)
Serpentine Idler/Tensioner Pulley; Direct Fit, 70 mm Diameter, 19.03 mm Smooth
Drive Belt Idler Assemblies
Top-Rated Dayco Belts and Hoses
If Dayco are what you’re looking for, our inventory holds plenty. We stock Dayco brand Belts and Hoses for your 2010 Chrysler PT Cruiser, and some of our most reviewed Dayco parts include:
from
$25.99
(16)
Curved Radiator Hoses: EPDM Rubber, Standard Duty, 19" Long, 1.34" Diameter
Upper Radiator Hoses
from
$25.99
(12)
Curved Radiator Hoses: EPDM Rubber, Standard Duty, 13" Long, 1.34" Diameter
Lower Radiator Hoses
FAQs for 2010 Chrysler PT Cruiser Belts and Hoses
What are the most purchased Belts and Hoses for the 2010 Chrysler PT Cruiser?
Out of 27 Belts and Hoses for the 2010 Chrysler PT Cruiser, the most popular in our inventory are:
What are the top-rated 2010 Chrysler PT Cruiser Belts and Hoses?
Top-rated Belts and Hoses for your 2010 Chrysler PT Cruiser based on customer reviews/ratings are:
from
$24.99
(6)
PCV Intake Hose
“I noticed a small split in the PCV valve tubing and replaced it. The car runs a lot better!”
from
$104.99
(1)
Serpentine Belt Tensioner: 1 Piece
“When installing, use a couple washers under the m10 bolt head to take up the bolt length. Failure to do so will have the bolt bottoming out before it'”
