2010 Chevrolet Malibu Body Parts

Below you will find various in-demand Chevrolet Body Parts, components and accessories for your 2010 Malibu. Advance Auto Parts has popular Malibu parts like Vehicle Windows, Bodies and Fender Parts, Vehicle Latches and Handles and more. You’ll also find aftermarket and OEM Body Parts for other Malibu model years including 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 and more. Select a category of 2010 Chevrolet Malibu Body Parts below and start saving instantly.

Popular 2010 Chevrolet Malibu Body Parts Categories

Hood Latch Assemblies

Fender Liner Retainers

Power Window Switches

Splash Shield Retainers

Exterior Door Handles

Shock Bumpers

Trunk Lock Switches

Door Molding Retainers

Grille Retainers

Bumper Cover Reinforcements

Door Lock Solenoid Connectors

Bumper Impact Bars

Rocker Panel Molding Retainers

Grille Mounting Panels

Bumper Pad Retainer Strips

Fender Splash Shields

Bumper Cover Supports

Bumper Impact Absorbers

Mirror Replacement Glass

Exterior Door Handle Covers

Side Body Panel Moldings

Hood Hinges

Console Clips

Weatherstrip Fasteners

Power Window Switch Connectors

Door Harness Connectors

Body Side Molding Clips

Sunroof Relays

Sunroof Switch Connectors

Door Lock Motor Connectors

Trunk Lid Release Actuator Solenoid Connectors

Deck Lid and Hatch Release Switch Connectors

Door Courtesy Lamp Connectors

Remote Control Door Lock Receiver Connectors

Trunk Lid Release Switch Connectors

Roof Accessory Harness Connector

Essential Body Parts for 2010 Chevrolet Malibus

from

$33.49

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$59.99

This door window switch is designed to match the fit, function and performance of the factory switch on specified vehicles. It is engineered to help restore window switch functionality to original equipment standards when the factory part is missing, broken, or has failed from internal electrical or mechanical component damage.

Product Features:

Direct replacement – this door window switch is designed to match the fit, function and performance of the factory switch on specified vehicles
Ideal solution – engineered to help restore window switch functionality to original equipment standards when the factory part is missing, broken, or has failed from internal component damage
Restores appearance – manufactured to precise specifications for a seamless installation and fit that complements the vehicle interior
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$161.99

Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing ¿ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ¿ in the part design process ensures speed-to-market and a precise fit guaranteed.
Computer-Aided Design (CAD), laser scanning and 3D printing ┐ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ┐ in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$20.99

With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New Standard Replacement Grille, Dark Gray. It is Designed to Replace Your Existing Grille. Check to Be Sure it Fits Your Vehicle.

Product Features:

Dark Gray, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$88.99

Rear Lower Valance Panel

from

$26.49

Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.

Product Features:

Heavy Gauge Steel Body
Self-Cleaning Piston Assembly
Rubber O-Ring Piston Seal
Non-Stick Back-Up Ring
Hardened Nitride Plated Steel Shaft
Engineered In USA To OE Quality Standards For Performance And Durability
IATF 16949, ISO 9001 Certified; Passes Extensive Quality Checks And Testing
Easy To Install In Just Minutes. No Special Tools Required.
Exact Fit Original Equipment Design Guarantees Correct Fit And Function
Consistent Performance In All Weather Conditions
Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle

from

$4.99

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$44.69

INTERIOR DOOR HANDLE

from

$30.49

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$343.99

New CAPA Certified Premium Replacement Rear Bumper Cover Reinforcement Bar

Product Features:

Made Of Ultra-High Strength Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$21.79

GM Genuine Parts Trunk Lid Release Switches are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$2.79

Needa Parts, a division of the Hillman Group, is an industry leader in all types of automotive body fasteners, retainers, and clips, offering over 400 SKUs of interior, exterior, and underhood fasteners.

Product Features:

Needa Parts offers a complete assortment for all popular makes and models
Vehicle make specific fastener kits are available
All fasteners meet or exceed OEM standards

from

$3.49

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$34.99

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$73.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$69.99

This door mirror was engineered to look, fit and function like the original mirror assembly for your vehicle’s specific year, make and model. It includes the same mirror glass, housing, bracket and technology as the part that came on the vehicle.

Product Features:

Perfect replacement – reverse engineered to look, fit and function exactly like the original door mirror on your vehicle’s specific year, make and model
Complete assembly – includes same mirror glass, housing, bracket and technology as the original part that came on the vehicle
Cost-effective and reliable – functions similarly to the original part but is much less expensive than getting a replacement from the dealership or original manufacturer
Easy installation – no special tools or equipment is necessary for installing this new part

from

$499.99

New CAPA Certified Premium Replacement Rear Bumper Cover, With Holes For Chrome License Plate Frame, Prime Paint To Match, Fits All But 2011-2012 Ls Models

Product Features:

With Holes For Chrome License Plate Frame, Prime Paint To Match, Fits All But 2011-2012 Ls Models, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$189.99

As the Leading Value-Added Global Distributor of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles While Offering Our Customers the Most Comprehensive and Cost Effective Part Solutions, We Are Supplying a New CAPA Certified Premium Replacement Front Bumper Impact Absorber, Made of EPP Foam. It is Designed to Replace Your Existing Bumper Impact Absorber. Check to Be Sure it Fits Your Vehicle.

Product Features:

Made Of EPP Foam
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$4.99

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$108.99

With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New CAPA Certified Premium Replacement Upper Grille Molding, Chrome. It is Designed to Replace Your Existing Grille Molding. Check to Be Sure it Fits Your Vehicle.

Product Features:

Chrome, Made Of ABS Thermoplastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$4.99

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$15.99

New Economy Replacement Front Bumper Center Support Bracket

Product Features:

Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$156.99

Coat to Coast International body side molding is a stylish accessory that compliments any vehicle. Durable ABS plastic is chrome plated for lasting shine. Side moldings install effortlessly with automotive grade 3M tape. All Coast to Coast International products feature a limited lifetime warranty.

Product Features:

Constructed From High-Quality, Durable, Automotive Grade ABS
Two Layers Of Clear Coat Enhance And UV Protect The Finish
Quickly And Affordably Upgrades The Trim Level Appearance Of A Vehicle
Installs In Minutes Without Tools Using Pre-Applied Automotive Grade 3M Tape
Easy Installation
Mount with 3M Tape

from

$14.99

New Economy Replacement Upper Grille Mounting Panel

Product Features:

Made Of Polypropylene
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$1.29

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$4.99

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$121.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$25.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

Upgrade your 2010 Chevrolet Malibu with Top-Quality Body Parts

When it comes to maintaining or upgrading your 2010 Chevrolet Malibu, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Body Parts are key to keeping your Malibu functioning at its best. At Advance Auto Parts, we offer a wide selection of 127 Body Parts for the 2010 Chevrolet Malibu, designed to meet your needs without breaking the bank. From Vehicle Window replacements to Bodies and Fender Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Body Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Body Parts for your 2010 Chevrolet Malibu at great prices. Our Body Parts inventory for this model ranges from just $0.99 to $634.99, with an average price of $67.69. Our 127 Body Parts in stock come from 11 trusted brands, so you’re sure to find the right part for your 2010 Chevrolet Malibu without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2010 Chevrolet Malibu, we stock popular OEM and aftermarket Body Parts from top names like StrongArm, GM Genuine, Dorman, and more. StrongArm Body Parts start at just $25.49 and boast an impressive 4.5 stars average rating from customers. GM Genuine and Dorman also bring quality to the table, with Body Parts available starting at $4.99, and at an average 4.5 stars rating. With 191 customer reviews and counting, our 2010 Chevrolet Malibu Body Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Body Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2010 Chevrolet Malibu is always ready to roll. We’re committed to providing you with everything you need to keep your Malibu in top shape, all in one place. Start shopping confidently below for your 2010 Chevrolet Malibu!

Best-Selling Vehicle Windows for 2010 Chevrolet Malibus

Enhance the driving experience in your Chevrolet with 5 quality Vehicle Window components, starting at $116.99.

show more show less

from

$148.99

AISIN Window Regulator Assemblies and Motors are mechanical and electrical components that work together to raise and lower the power windows in a vehicle. The window regulator assembly is the mechanical component that consists of gears, tracks and other parts that move the window up and down. The electric motor is the component that provides the power to move the window. Together, they form the power window system that allows the driver and passengers to easily raise and lower the windows with the push of a button.

Product Features:

100% new with many improvements from factory design.
Designed and manufactured to meet OE standards.
Strict quality control to ensure perfect fit.

from

$136.99

100% new with many improvements from factory design.
Designed and manufactured to meet OE standards.
Strict quality control to ensure perfect fit.

from

$135.99

100% new with many improvements from factory design.
Designed and manufactured to meet OE standards.
Strict quality control to ensure perfect fit.

from

$122.99

100% new with many improvements from factory design.
Designed and manufactured to meet OE standards.
Strict quality control to ensure perfect fit.

from

$116.99

This replacement window regulator is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.

Product Features:

Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
Reliable design – engineered in the USA and backed by long history of automotive aftermarket experience
Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit

Most Popular 2010 Chevrolet Malibu Bodies and Fender Parts

Customize your Chevrolet with 29 Bodies and Fender Parts products like Fender Splash Shields, Fender Liner Retainers, and Fender Liners, all priced under $156.99.

show more show less

from

$4.99

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost
Pack of 3

from

$4.99

Dorman offers a comprehensive variety of rivets for almost any automotive fastening job. They’re available in a broad variety of lengths, head diameters, hole diameters, and grip ranges.

Product Features:

Available in blind, push-in and screw-in styles
Constructed of high-quality materials for long-lasting durability
Also suitable for a broad variety of industrial and commercial uses
Packaged in a variety of piece counts for use with both small and large projects

from

$5.99

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$4.99

Dorman offers a comprehensive line of Clip / Spring Nuts for a range of automotive applications. They are available for use with a large variety of screw sizes, throat depths, and panel ranges.

Product Features:

Constructed of high-quality materials for long-lasting durability
Many different styles are available, including threaded and wide panel
Packaged in a variety of piece counts for use with both small and large projects
Also suitable for a broad range of industrial and commercial uses

from

$4.99

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$4.99

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$4.99

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$4.49

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$2.99

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$5.29

Constructed of high-quality materials for long-lasting durability
Many different styles are available, including threaded and wide panel
Packaged in a variety of piece counts for use with both small and large projects
Also suitable for a broad range of industrial and commercial uses

from

$70.99

New CAPA Certified Premium Replacement Rear Bumper Valance, For Single Exhaust 2.4L Engine, Matte-Dark Gray

Product Features:

For Single Exhaust 2.4L Engine, Matte-Dark Gray, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$65.99

New CAPA Certified Standard Replacement Passenger Side Fender Liner

Product Features:

Made Of Polyethylene
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$57.99

New Standard Replacement Driver Side Fender Liner

Product Features:

Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$2.99

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$78.99

New CAPA Certified Standard Replacement Rear Bumper Valance, 3.6L Engine, Matte-Gray, With Dual Exhaust

Product Features:

3.6L Engine With Dual Exhaust, Matte-Gray, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$156.99

Constructed From High-Quality, Durable, Automotive Grade ABS
Two Layers Of Clear Coat Enhance And UV Protect The Finish
Quickly And Affordably Upgrades The Trim Level Appearance Of A Vehicle
Installs In Minutes Without Tools Using Pre-Applied Automotive Grade 3M Tape
Easy Installation
Mount with 3M Tape

from

$69.99

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$65.99

New CAPA Certified Standard Replacement Driver Side Fender Liner

Product Features:

Made Of Polyethylene
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$57.99

New Standard Replacement Passenger Side Fender Liner

Product Features:

Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$47.99

Rear Lower Valance Panel

from

$41.99

New CAPA Certified Standard Replacement Driver Side Fender Liner, Lower Air Deflector

Product Features:

Lower Air Deflector, Made Of Polypropylene
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$31.99

New Standard Replacement Driver Side Front Inner Fender Panel, Air Deflector

Product Features:

Air Deflector, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$31.99

New Standard Replacement Passenger Side Front Inner Fender Panel, Air Deflector

Product Features:

Air Deflector, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$28.99

This jounce bumper is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

Top Picks for 2010 Chevrolet Malibu Vehicle Latches and Handles

Upgrade Chevrolet Malibus with top-quality Vehicle Latches and Handles parts, including 10 OEM and aftermarket selections for your 2010 model.

show more show less

from

$55.99

Coast to Coast International door handle and mirror covers are a quick way to add a touch of chrome or black-out styling to change the appearance of a vehicle. All covers are designed and manufactured to overlay the OEM handle or mirror to give the appearance of a factory upgrade. Installation is quick and easy with no tools required. Pair them with CCI grille overlays and Impostor(R) wheel skins for a complete package look. Limited lifetime warranty. All Coast to Coast International products feature a limited lifetime warranty.

Product Features:

A NEW LOOK FOR LESS: Upgrade The Trim Level Appearance Of Your Vehicle With These Door Handle Covers. Add Mirror Covers And Wheel Skins (Sold Separately) For A Factory-Style Package
Door Handle Covers Are Year-Make-Model Specific And Available In Different Finishes
Fits Like A Glove Over Existing Handles And Stay Securely Attached Using A Retention System Molded Into The Cover So You Can Be Confident That They Wont Fall Off While Driving
UV Protected Paint And A Clear Coat Ensure That The Finish Wont Crack Or Fade
COMPLEMENTS OEM STYLING, Instantly, And Easily, Upgrades The Vehicle Aesthetics While Complementing The OEM Styling Of The Vehicle
EASY TO INSTALL, No Tools Are Required For A Quick, Snap-On Installation That Is Ready To Go In Minutes And Easy To Maintain. Designed And Tested In The USA.

from

$36.99

This exterior door handle reinforcement is designed to match the fit and function of the original reinforcement on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this exterior door handle reinforcement is designed to match the fit and function of the original reinforcement on specified vehicles
Restores functionality – this handle reinforcement is made to fully restore appearance and functionality after the original reinforcement fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$16.49

Direct replacement – this exterior door handle reinforcement is designed to match the fit and function of the original reinforcement on specified vehicles
Restores functionality – this handle reinforcement is made to fully restore appearance and functionality after the original reinforcement fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$15.29

Direct replacement – this exterior door handle reinforcement is designed to match the fit and function of the original reinforcement on specified vehicles
Restores functionality – this handle reinforcement is made to fully restore appearance and functionality after the original reinforcement fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$137.99

Hood no longer opening or closing properly? This replacement hood latch assembly matches the fit and function of the original equipment hood latch and is made of corrosion-resistant materials for reliable service.

Product Features:

Direct replacement – this hood latch assembly matches the fit and function of the original equipment latch
Durable construction – corrosion-resistant housing enhances this latch’s durability and prevents functional deterioration
Easy installation – requires no special tools to replace
Quality tested – this part has undergone vehicle fitment and material testing to ensure proper fit and reliable service

from

$55.99

A NEW LOOK FOR LESS: Upgrade The Trim Level Appearance Of Your Vehicle With These Door Handle Covers. Add Mirror Covers And Wheel Skins (Sold Separately) For A Factory-Style Package
Door Handle Covers Are Year-Make-Model Specific And Available In Different Finishes
Fits Like A Glove Over Existing Handles And Stay Securely Attached Using A Retention System Molded Into The Cover So You Can Be Confident That They Wont Fall Off While Driving
UV Protected Paint And A Clear Coat Ensure That The Finish Wont Crack Or Fade
COMPLEMENTS OEM STYLING, Instantly, And Easily, Upgrades The Vehicle Aesthetics While Complementing The OEM Styling Of The Vehicle
EASY TO INSTALL, No Tools Are Required For A Quick, Snap-On Installation That Is Ready To Go In Minutes And Easy To Maintain. Designed And Tested In The USA.

from

$53.99

Direct replacement – this exterior door handle reinforcement is designed to match the fit and function of the original reinforcement on specified vehicles
Restores functionality – this handle reinforcement is made to fully restore appearance and functionality after the original reinforcement fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$37.99

Direct replacement – this exterior door handle reinforcement is designed to match the fit and function of the original reinforcement on specified vehicles
Restores functionality – this handle reinforcement is made to fully restore appearance and functionality after the original reinforcement fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$34.99

Direct replacement – this exterior door handle reinforcement is designed to match the fit and function of the original reinforcement on specified vehicles
Restores functionality – this handle reinforcement is made to fully restore appearance and functionality after the original reinforcement fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$17.99

Direct replacement – this exterior door handle reinforcement is designed to match the fit and function of the original reinforcement on specified vehicles
Restores functionality – this handle reinforcement is made to fully restore appearance and functionality after the original reinforcement fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

In-Demand Vehicle Hoods for 2010 Chevrolet Malibus

Select from 9 premium Vehicle Hoods parts for your 2010 Chevrolet Malibu, with prices ranging from $3.49 to $634.99.

show more show less

from

$35.99

Heavy Gauge Steel Body
Self-Cleaning Piston Assembly
Rubber O-Ring Piston Seal
Non-Stick Back-Up Ring
Hardened Nitride Plated Steel Shaft
Engineered In USA To OE Quality Standards For Performance And Durability
IATF 16949, ISO 9001 Certified; Passes Extensive Quality Checks And Testing
Easy To Install In Just Minutes. No Special Tools Required.
Exact Fit Original Equipment Design Guarantees Correct Fit And Function
Consistent Performance In All Weather Conditions
Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle

from

$25.49

Heavy Gauge Steel Body
Self-Cleaning Piston Assembly
Rubber O-Ring Piston Seal
Non-Stick Back-Up Ring
Hardened Nitride Plated Steel Shaft
Engineered In USA To OE Quality Standards For Performance And Durability
IATF 16949, ISO 9001 Certified; Passes Extensive Quality Checks And Testing
Easy To Install In Just Minutes. No Special Tools Required.
Exact Fit Original Equipment Design Guarantees Correct Fit And Function
Consistent Performance In All Weather Conditions
Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle

from

$634.99

New CAPA Certified Premium Replacement Hood Panel, Made Of High Strength Steel

Product Features:

Made Of High Strength Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$631.99

New Economy Replacement Hood Panel

Product Features:

Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$12.99

New Standard Replacement Passenger Side Hood Hinge, Hood Mounted

Product Features:

Hood Mounted, Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$12.99

New Standard Replacement Driver Side Hood Hinge Assembly, Hood Mounted

Product Features:

Hood Mounted, Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$12.99

New Standard Replacement Passenger Side Hood Hinge Assembly, Body Mounted

Product Features:

Body Mounted, Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$11.99

New Standard Replacement Driver Side Hood Hinge Assembly, Body Mounted

Product Features:

Body Mounted, Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$3.49

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

Most Sold 2010 Chevrolet Malibu Vehicle Doors

Explore our best-selling Chevrolet parts for the 2010 Malibu among 8 OEM and aftermarket options starting from $1.29.

show more show less

from

$1.29

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$68.99

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$34.99

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$43.49

GM Genuine Parts Door Lock Switches are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$30.49

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$162.99

This door lock actuator has undergone extensive quality and safety testing to ensure reliable performance. It is engineered to provide a direct replacement for the stock actuator on specific vehicle years, makes and models.

Product Features:

Reliable replacement – this door lock actuator has undergone extensive quality and safety performance testing
Perfect fit – engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models
Safety compliant – part has undergone simulated crash testing under government guidelines
Long-lasting repair – cycle testing in an actual vehicle door verifies effective usage for years

from

$73.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$25.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

Top-Rated Body Parts Brands For Your 2010 Chevrolet Malibu

Shop for the best-rated brands offering Body Parts and other products for your 2010 Chevrolet Malibus. Below you’ll find some of our best rated Body Parts from StrongArm, GM Genuine, and Dorman, and more. Body Parts from these brands that fit a 2010 Malibu start at just $4.99 and are rated as high as 4.5 stars. OEM and aftermarket Body Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular StrongArm 2010 Chevrolet Malibu Body Parts

When it comes to maintaining or upgrading your 2010 Chevrolet Malibu, using quality Body Parts is essential to ensure durability and a perfect fit. StrongArm ticks all of those boxes. We offer a wide selection of StrongArm Body Parts, specifically designed for the 2010 Chevrolet Malibu. With over 2 StrongArm brand Body Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $25.49, with an average price of just $30.74. Plus, with over 11 customer reviews and an average rating of 4.5 stars, you can trust that our StrongArm Body Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $35.99

(2)

Trunk Lift Support: 12.36" Ext Length, 3.75" Travel, 84 Lbs of Force, 1 Pk

“They work great”

from $25.49

(9)

Hood Lift Support: 19.62" Ext Length, 7.5" Travel, 72 Lbs of Force, 1 Pk

“to hold engine hood open.”

Popular GM Genuine 2010 Chevrolet Malibu Body Parts

GM Genuine auto parts is one of the highest quality Body Part brands in the market. Any 2010 Chevrolet Malibu owner should feel confident when installing genuine GM Genuine parts in their vehicle. To ensure the best fit and performance for your 2010 Malibu, Advance Auto Parts carries a full inventory of 1 GM Genuine Body Parts. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these GM Genuine Body Parts range up to $43.99, plus, with more than 1 customer reviews and an impressive 4.5 stars average rating, you can be confident the Fram Body Parts below will deliver on both quality and value.

from $43.99

(1)

Trunk Lid Release Switch

“Is exact replacment part. Fits and works as the original did”

FAQs for 2010 Chevrolet Malibu Body Parts

Which Body Parts are best-sellers for 2010 Chevrolet Malibus?

Out of 127 Body Parts that fit 2010 Chevrolet Malibus, the following parts are the top sellers:

Chrysler, Ford, GM Panel Retainer, Pack of 3 (11911131) – $4.99
GM Trim Panel Clip (11910800) – $4.99
Chrysler, GM Push Rivet (11910661) – $4.99

What’s the price range for 2010 Chevrolet Malibu Body Parts?

Body Part prices for the 2010 Chevrolet Malibu start at $0.99 and go up to $634.99 for the most premium parts.

What’s the average price of a Body Part for a 2010 Chevrolet Malibu?

The average price for Body Parts for the 2010 Chevrolet Malibu is $67.69. Keep in mind the variety of part types within our Body Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Body Parts for other Chevrolet Malibu model years?

Yes, we currently carry Body Parts for 42 model years of Chevrolet Malibus between 1964 and 2025. Body Parts are bought most frequently for the following model years: 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015, and 2014.

What are the cheapest Body Parts for my 2010 Chevrolet Malibu?

The cheapest 2010 Chevrolet Malibu Body Parts we carry in stock are:

Panel Trim Retainer, Interior, GM/Ford/Chrysler (Sold by each) (22141968) – $0.99
Panel Trim Retainer – Interior – Ford (sold by each) (22141955) – $1.29
Blind Rivet Retainer-GM-Diameter 3/16 In. (sold by each) (11224079) – $1.29
Windsheild Garnish Clip-exterior-GM (sold by each) (11224154) – $1.29
Panel Trim Retainer – Interior – GM/Chrysler (9110488) – $2.79

What are the top-rated Body Parts that fit the 2010 Chevrolet Malibu?

Out of 191 reviews by customers, our 2010 Chevrolet Malibu Body Parts have an average customer rating of . These are some of the highest-rated Body Part types for the 2010 Chevrolet Malibu and their top-rated products:

Vehicle Hoods
- Trunk Lift Support: 12.36" Ext Length, 3.75" Travel, 84 Lbs of Force, 1 Pk (10169672) – $35.99
- Hood Lift Support: 19.62" Ext Length, 7.5" Travel, 72 Lbs of Force, 1 Pk (10169388) – $25.49

What types of Body Parts do you sell for my 2010 Chevrolet Malibu?

As of 11/2/25, these are some of the most in-demand types of Body Parts for a 2010 Chevrolet Malibu:

Can I get help with 2010 Chevrolet Malibu Body Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Body Parts and more.

What is your return policy for Chevrolet Malibu Body Parts?

Advance Auto Parts keeps returns simple. For new Chevrolet Malibu Body Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2010 Chevrolet Malibu Body Parts

Carquest Premium – Multi-Use Connector (Part No.PTA1379)

Dorman – Master Window Switch (Part No.901-082)

Carquest Premium – Sunroof Relay (Part No.SBA8004)

KAI – New Standard Replacement Grille, Dark Gray (Part No.GM1200449)

KAI – Rear Lower Valance Panel (Part No.GM1195127)

StrongArm – Liftgate Lift Support: 17.68" Ext Length, 6.0" Travel, 105 Lbs of Force, 1 Pk (Part No.D6510)

Dorman – GM Bumper Retainer (Part No.961-070D)

AutoCraft – INTERIOR DOOR HANDLE (Part No.79797)

ACDelco – 2-Way Female Gray Multi-Purpose Pigtail (Part No.PT209)

KAI – Bumper Cover Reinforcement (Part No.GM1106670DSC)

GM Genuine Parts – Anthracite Trunk Lid Release Switch (Part No.22789337)

Needa Parts – Panel Trim Retainer – Interior – GM/Chrysler (Part No.45478)

Dorman – Ford Trim Panel Retainers (Part No.963-022)

GM Genuine Parts – Black Multi-Purpose Pigtail (Part No.PT2712)

Carquest Premium – Multi-Use Connector (Part No.PTA1424)

Dorman – Mirror Assembly: Power Adjustment, 1 Pack (Part No.955-320)

KAI – Bumper Cover (Part No.GM1100816PP)

KAI – New CAPA Certified Premium Replacement Front Bumper Impact Absorber (Part No.GM1070282DSC)

Dorman – Push-Pull Rivet-Rocker Panel – 9 mm Hole, 22 mm Stem, 15 mm Head (Part No.963-093D)

KAI – New CAPA Certified Premium Replacement Upper Grille Molding, Chrome (Part No.GM1210114PP)

Dorman – GM Molding Retainer (Part No.963-203D)

KAI – Bumper Mounting Bracket (Part No.GM1065113V)

COAST TO COAST – Direct Fit, Chrome Plated, 4 Piece (Part No.CCISM601)

KAI – Grille Mounting Panel (Part No.GM1223104V)

Dorman – Panel Trim Retainer – Interior – Ford (sold by each) (Part No.700-398)

Dorman – Push Retainer 1/4 In. (Part No.961-075D)

Carquest Premium – Multi-Use Connector (Part No.PTA2327)

Carquest Premium – Multi-Use Connector (Part No.PTA2575)

AISIN – Power Window Regulator Assembly with Motor (Part No.RPAGM-154)

AISIN – Power Window Regulator Assembly with Motor (Part No.RPAGM-155)

AISIN – Power Window Regulator Assembly without Motor (Part No.RPGM-096)

AISIN – Power Window Regulator Assembly without Motor (Part No.RPGM-095)

Dorman – Window Regulator: Power, 1 Pack (Part No.749-985)

Dorman – Chrysler, Ford, GM Panel Retainer, Pack of 3 (Part No.963-058D)

Dorman – GM Blind Rivet Retainer – Diameter 3/16 In. (Part No.963-205D)

Dorman – Rivet-Push In-Hole Diameter .500 In-Head Diameter 1 In-Length .900 In (Part No.799-105)

Dorman – GM Trim Panel Clip (Part No.963-211D)

Dorman – Chrysler, GM Push Rivet (Part No.961-359D)

Dorman – GM Bumper Retainer (Part No.961-070D)

Dorman – GM Molding Retainer (Part No.963-203D)

Dorman – Moulding Retainer-Interior-GM (Part No.963-203)

Dorman – Nylon Push In Rivet (Part No.961-359)

Dorman – Windshield Garnish Clip – Exterior (Part No.963-211)

KAI – Valance Panel (Part No.GM1195110PP)

KAI – Fender Liner (Part No.GM1249201C)

KAI – Fender Liner (Part No.GM1248201)

Dorman – Rivet-Push In-Hole Diameter .500 In-Head Diameter 1 In-Length .900 In (sold by each) (Part No.700-575)

KAI – Valance Panel (Part No.GM1195111C)

COAST TO COAST – Direct Fit, Chrome Plated, 4 Piece (Part No.CCISM602)

GM Genuine Parts – Multi-Purpose Pigtail (Part No.PT2882)

KAI – Fender Liner (Part No.GM1248201C)

KAI – Fender Liner (Part No.GM1249201)

KAI – Rear Lower Valance Panel (Part No.GM1195110)

KAI – Air Dam (Part No.GM1248228C)

KAI – Air Dam (Part No.GM1248228)

KAI – Air Dam (Part No.GM1249228)

Dorman – Position Jounce Bumper (Part No.523-238)

COAST TO COAST – Chrome Plated, Abs, With Driver Side Keyhole/ Without Passenger Side Keyhole (Part No.CCIDH68523B)

Dorman – Help – Exterior Door Handle Reinforcement Bracket (Part No.81103)

Dorman – Help – Reinforcement Bracket Exterior Door Handle (Part No.81108)

Dorman – Help – Exterior Door Handle Reinforcement Bracket (Part No.81107)

Dorman – Hood Latch Assembly (Part No.820-204)

COAST TO COAST – Gloss Black Abs, With Driver Side, Without Passenger Side Keyhole (Part No.CCIDH68523BBK)

Dorman – Help – Exterior Door Handle Reinforcement Bracket (Part No.81106)

Dorman – Help – Exterior Door Handle Reinforcement Bracket (Part No.88317)

Dorman – Help – Exterior Door Handle Reinforcement Bracket (Part No.81104)

Dorman – Help – Exterior Door Handle Reinforcement Bracket (Part No.81105)

StrongArm – Trunk Lift Support: 12.36" Ext Length, 3.75" Travel, 84 Lbs of Force, 1 Pk (Part No.E6167)

StrongArm – Hood Lift Support: 19.62" Ext Length, 7.5" Travel, 72 Lbs of Force, 1 Pk (Part No.D6166)

KAI – Hood Panel (Part No.GM1230380PP)

KAI – Hood Panel (Part No.GM1230380V)

KAI – Hood Hinge (Part No.GM1236131)

KAI – Hood Hinge (Part No.GM1236132)

KAI – Hood Hinge (Part No.GM1236133)

KAI – Hood Hinge (Part No.GM1236134)

Dorman – Ford Trim Panel Retainers (Part No.963-022)

Dorman – Panel Trim Retainer – Interior – Ford (sold by each) (Part No.700-398)

GM Genuine Parts – Natural Colored Multi-Purpose Pigtail (Part No.PT2652)

GM Genuine Parts – Black Multi-Purpose Pigtail (Part No.PT2712)