2010 Chevrolet Express 2500 Differentials

Essential 2010 Chevrolet Express 2500 Differentials

Richmond Gear – RngPnn (Part No.79-0077-1)

RngPnn

from

$587.99
RngPnn

Yukon Gear – Differential Carrier (Part No.57015)

Differential Carrier

from

$251.99
Differential Carrier

Yukon Gear – Dura Grip Positraction For GM 9.5" With 33 Spline Axles (Part No.26025)

Dura Grip Positraction For GM 9.5" With 33 Spline Axles

from

$1025.00
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects.

Product Features:
  • Fits GM 9.5″
  • 4-spring, clutch style positraction
  • Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
  • Fully rebuildable
  • Assembled in the USA
See More

Yukon Gear – Replacement Yoke For Dana 60 And 70 With A 1330 U/Joint Size (Part No.41025)

Replacement Yoke For Dana 60 And 70 With A 1330 U/Joint Size

from

$271.99
Yukon replacement yoke for Dana 60 and 70 with a 1330 U/joint size. 3.625″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects. This is a u/bolt style yoke.

Product Features:
  • Fits Dana Spicer 60 and 70
  • 29 spline
  • 1330 u-joint size
  • Outside snap ring design
  • 3.625″ snap ring span
  • 1.062″ cap diameter
  • U-bolt style
See More

Yukon Gear – Pinion Install Kit For ’98 & Up GM 9.5" Differential (Part No.13076)

Pinion Install Kit For '98 & Up GM 9.5" Differential

from

$319.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits 1998 and up GM 9.5″
  • Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.
See More

Yukon Gear – Dana 60, Dana 70 & Dana 80 Cover Bolt (Part No.33235)

Dana 60, Dana 70 & Dana 80 Cover Bolt

from

$5.99
3/8″ cover bolt, Dana 60, Dana 70 & Dana 80.

Product Features:
  • Cover bolt for Dana Spicer 60, 70 and 80
  • 3/8″
See More

Yukon Gear – Steel Cover For Dana 60 Standard Rotation (Part No.32321)

Steel Cover For Dana 60 Standard Rotation

from

$114.99
Product Features:
  • Fits standard rotation Dana Spicer 60
  • Steel
See More

Dorman – Ring and Pinion Bearing Installation Kit (Part No.697-111)

Ring and Pinion Bearing Installation Kit

from

$282.99
This differential bearing kit includes all necessary installation components for a differential ring and pinion on certain vehicle years, makes and models.

Product Features:
  • Convenient kit – this ring and pinion bearing installation kit includes all necessary components for a complete repair on certain vehicle applications.
  • Related repair – smart to have on hand when installing a differential ring and pinion.
  • Durable construction – built for reliable longevity, free of defects in materials and workmanship
  • Trustworthy quality – backed by team of designers and engineers in the United States
See More

Driveworks – Tapered Roller Bearing (Part No.S-M-802048)

Tapered Roller Bearing

from

$16.99
Product Features:
  • Brand may vary by location
See More

Yukon Gear – Dana 44 JK / 60 / 70U Pinion Nut Washer Replacement (Part No.33164)

Dana 44 JK / 60 / 70U Pinion Nut Washer Replacement

from

$3.99
Product Features:
  • Pinion nut washer for Chrysler 7.25″, 8.25″, 8.75″ with 29 spline pinion, Jeep JK rear, Dana Spicer 60, 70, 70U and 70HD and 2007-2010 Ford 10.5″
See More

Yukon Gear – Replacement Carrier Shim Kit For Dana 60, 61 & 70U (Part No.55020)

Replacement Carrier Shim Kit For Dana 60, 61 & 70U

from

$104.99
Product Features:
  • Carrier shims for Dana Spicer 60 and 70U
See More

Yukon Gear – DiffrlPinSupportBolt (Part No.33582)

DiffrlPinSupportBolt

from

$5.99
DiffrlPinSupportBolt

Motive Gear – Differential Pinion Shim Kit (Part No.1118)

Differential Pinion Shim Kit

from

$6.49


Product Features:
  • DANA PRELOAD SHIMS (D60 & D70)
See More

Yukon Gear – 9.5 Standard Open Pinion Gear Thrust Washer (Part No.33374)

9.5 Standard Open Pinion Gear Thrust Washer

from

$28.99
9.5 Standard Open Pinion gear Thrust Washer.

Product Features:
  • Pinion gear thrust washer
  • Fits GM 9.5″
See More

Felpro – Differential Cover Gasket (Part No.RDS 55031)

Differential Cover Gasket

from

$21.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Motive Gear – Differential Carrier Shim Kit (Part No.1106)

Differential Carrier Shim Kit

from

$18.99


Product Features:
  • CARRIER SHIM-DANA 60 & 70
See More

Valvoline – Transfer Case Fluid, 1 Quart (Part No.855459)

Transfer Case Fluid, 1 Quart

from

$14.99
Valvoline Multi-Vehicle Transfer Case Fluid is a full synthetic product meeting the performance needs for transfer cases recommending Ford XL-12 and GM Auto Trak II specifications or ATF fluids (DEX/MERC, ATF +4, etc).

Product Features:
  • Recommended for use in most Ford, GM and FCA (Dodge, Jeep) models
  • Formulated to help prevent gear wear and protect against rust and corrosion
  • Formulated to deliver enhanced protection against deposits
  • Helps provide better protection during extreme operating conditions
See More

Motive Gear – Differential Pinion Shim Kit (Part No.1102)

Differential Pinion Shim Kit

from

$9.49


Product Features:
  • KIT SHIM PINION
See More

Yukon Gear – Adapter Sleeve Fro GM 7.2", 7.625" & 8.0" Yokes To Use Triple Lip Pinion Seal (Part No.41210)

Adapter Sleeve Fro GM 7.2", 7.625" & 8.0" Yokes To Use Triple Lip Pinion Seal

from

$25.99
Yukon 4340 Chrome-Moly replacement outer stub for D44 ’87-’94 Wrangler with a length of 8.31″ and 27 splines. Yukon 4340 Chrome-Moly axles provide up to 50% increased strength over stock axles for use in extreme performance applications with large tires and high horsepower. Yukon’s 4340 axles are manufactured using the latest technologies and the highest quality materials to ensure high strength and long life. Limited Lifetime warranty covers manufacturing defects and axle breakage for as long as you own the vehicle. This warranty is not transferable to another party. “No Questions Asked” replacement for first warranty return, however Yukon reserves the right to either replace axle or refund original purchase price after the first warranty claim. Yukon (through Randy’s ring & pinion) makes final determination on warranty considerations.

Product Features:
  • 27 spline
  • 8.31″ long
  • Fits Dana Spicer 30 in 1987-1994 Wrangler
  • Outer stub
  • 5-760X U-joint size
  • 4340 Chromoly
  • For WARN hub conversion only
See More

Yukon Gear – Standard Open Side Gear And Thrust Washer For 7.2" GM (Part No.33375)

Standard Open Side Gear And Thrust Washer For 7.2" GM

from

$17.99
Standard open side gear thrust washer for 7.2″ GM.

Product Features:
  • Side gear thrust washer
  • Fits GM 7.2″ IFS
See More

Yukon Gear – Bearing Race Driver Set, 21 Piece (Part No.56030)

Bearing Race Driver Set, 21 Piece

from

$1566.99
21 Piece bearing race driver set. (Box wt: 140lbs) No return.

Product Features:
  • Bearing race driver set
  • 21 pieces
  • All steel construction
See More

Motive Gear – Differential Gear Install Kit (Part No.GM8.5IK)

Differential Gear Install Kit

from

$65.99


Product Features:
  • MINI INSTALL KIT GM 8.5 REAR
See More

Pro-King – Differential Cross Shaft (Part No.742G930)

Differential Cross Shaft

from

$2.79
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – Standard Open Cross Pin Shaft For Four Pinion Design For GM 10.5" 14 Bolt Truck (Part No.33405)

Standard Open Cross Pin Shaft For Four Pinion Design For GM 10.5" 14 Bolt Truck

from

$89.99
Standard Open cross pin shaft for four pinion design for GM 14T.

Product Features:
  • Cross pin shaft
  • Fits GM 10.5″ 14 bolt truck
See More

Yukon Gear – Dura Grip Positraction For 10.5" GM 14 Bolt Truck, 4.10 & Down (Part No.26030)

Dura Grip Positraction For 10.5" GM 14 Bolt Truck, 4.10 & Down

from

$1110.00
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects.

Product Features:
  • Fits GM 10.5″ 14 bolt truck
  • 4.10 ratio and down only
  • Clutch style positraction
  • Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
  • Fully rebuildable
  • Assembled in the USA
See More

Yukon Gear – 10.5" GM 14 Bolt Truck Ring Gear Bolt (Part No.33051)

10.5" GM 14 Bolt Truck Ring Gear Bolt

from

$10.99
14T ring gear bolt 4.11 & down. 9/16″ x 18. 2.085″ overall length.

Product Features:
  • Ring gear bolt for GM 10.5″ 14 bolt truck
  • 4.11 and down ratio
  • 1/2″ x 18 thread
  • 2.085″ overall length
See More

Yukon Gear – Eaton Positraction Shim Kit For 10.5" GM 14 Bolt Truck (Part No.16113)

Eaton Positraction Shim Kit For 10.5" GM 14 Bolt Truck

from

$78.99
Eaton positraction shim kit for GM 14T.

Product Features:
  • Shim kit
  • Fits GM 10.5″ 14 bolt truck Eaton positraction
See More

National – Bearings (Part No.A-50)

Bearings

from

$53.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

2010 Chevrolet Express 2500 Differentials

Maybe you’re in the middle of a full rebuild of that 2010 Chevrolet Express 2500. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 217 different Differentials in our inventory ranging from $2.99 to $2,324.99. That means you can find the exact parts or products you need to keep that 2010 Chevrolet Express 2500 running smoothly.

Differentials are only as good as their brand. We stock 16 different brands to make sure you have plenty of trusted parts to choose from for your 2010 Chevrolet Express 2500. Valvoline, Royal Purple, and FELPRO are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 2010 Chevrolet Express 2500, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 2,326 reviews in this category, some of the top rated parts include Differential Cover Gasket with 4.3 stars and Bearings with 3.9 stars.

So if you’re in the market for aftermarket Differentials to keep your 2010 Chevrolet Express 2500 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 2010 Chevrolet Express 2500 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2010 Chevrolet Express 2500 demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your Express 2500 the best it can be. Be sure to browse some of our top Differentials brands and parts.

Top 2010 Chevrolet Express 2500 Differentials from Dorman

Dorman products are another trusted brand when it comes to Differentials for your 2010 Chevrolet Express 2500. Popular Dorman parts include:
Ring and Pinion Bearing Installation Kit
from $282.99
(255)
Ring and Pinion Bearing Installation Kit
Differential Bearing Kits

FAQs for 2010 Chevrolet Express 2500 Differentials

What are the most purchased Differentials for the 2010 Chevrolet Express 2500?

Out of 217 Differentials for the 2010 Chevrolet Express 2500, the most popular in our inventory are:
Differential Cover Gasket
from $6.79
(13)
Differential Cover Gasket
Rear Differential Cover Gaskets
Differential Cover Gasket
from $7.99
(20)
Differential Cover Gasket
Rear Differential Cover Gaskets

What are the top-rated 2010 Chevrolet Express 2500 Differentials?

Top-rated Differentials for your 2010 Chevrolet Express 2500 based on customer reviews/ratings are:
Differential Cover Gasket
from $21.49
(11)
Differential Cover Gasket
“Correct fit. Quality was good.”
Bearings
from $23.99
(7)
Bearings
“Good price”
Multi Purpose Seal
from $44.99
(5)
Multi Purpose Seal
“How do you fix a leaking rear end? You seal it. That’s why I bought this seal.”