2010 Chevrolet Camaro Ignition Coils and Boots

Essential 2010 Chevrolet Camaro Ignition Coils and Boots

DENSO – Spark Plug Wire Set: Carbon Core, 9 Wire Set (Part No.671-8020)

Spark Plug Wire Set: Carbon Core, 9 Wire Set

from

$65.99
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.

Product Features:
  • Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
  • Identical OE end caps are designed to “click” into place for easy installation and a secure fit
  • Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
See More

DENSO – Spark Plug Wire Set: Carbon Core, 8 Wire Set (Part No.671-8162)

Spark Plug Wire Set: Carbon Core, 8 Wire Set

from

$86.99
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.

Product Features:
  • Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
  • Identical OE end caps are designed to “click” into place for easy installation and a secure fit
  • Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
See More

DENSO – Spark Plug Wire Set: Carbon Core, 9 Wire Set (Part No.671-8042)

Spark Plug Wire Set: Carbon Core, 9 Wire Set

from

$59.99
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.

Product Features:
  • Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
  • Identical OE end caps are designed to “click” into place for easy installation and a secure fit
  • Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
See More

DENSO – Coil On Plug Boots-6 (Part No.671-6307)

Coil On Plug Boots-6

from

$66.99
DENSO First Time Fit COP boot sets are identical in form fit color and performance to the factory-installed boots. Every part of each COP boot set construction meets or exceeds OE/OES standards.

Product Features:
  • OE design ensures a tight boot seal that protects against moisture intrusion
  • High temperature resistant material provides greater protection against thermal overload
  • Stainless steel internal spring with resistor to suppress RFI and deliver maximum voltage to the plug
  • Engineered to the specifications used by the original vehicle manufacturer for an exact fit
See More

DENSO – Spark Plug Wire Set: Carbon Core, 9 Wire Set (Part No.671-8046)

Spark Plug Wire Set: Carbon Core, 9 Wire Set

from

$141.99
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.

Product Features:
  • Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
  • Identical OE end caps are designed to “click” into place for easy installation and a secure fit
  • Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
See More

Holley – LS Coil Covers Big Block Chevy Replica (Part No.242-1)

LS Coil Covers Big Block Chevy Replica

from

$269.99
Do you own a vehicle with LS based engine, but love the looks of a big-block Chevy? Well now, thanks to Holley, you can give your LS a custom look with our LS Coil Covers. They are equally at home on a 2010 Camaro or a LS swap muscle car, truck or any ride needing to cover the factory LS coils. They are ready to paint so use your imagination! The LS Coil Covers are constructed from Glass Filled Nylon Composite for strength and durability. The covers are easily installed by using basic hand tools. Just replace a few coil bracket mount bolts with the included ball studs and snap the covers in place.

Product Features:
  • Oil Fill Adapter and Cap Included
  • OEM-Style Snap-On Mounting
  • Trim To Fit Your Application
  • Paint To Match Your Color Scheme
  • Ultra Lightweight Glass-Filled Nylon Composite Construction
  • Coil Cover May Require Minor Trim On Typical Hot Rod Or Swap App
See More

Edelbrock – LS Series Coil Covers in Black Finish (3-3/8" Overall Height) (Part No.41183)

LS Series Coil Covers in Black Finish (3-3/8" Overall Height)

from

$404.99
Edelbrock part #41183 is a Black powder coated coil cover designed for GM Gen III LS motors. Our covers will mount to LS series motors with stock center bolt style valve covers and accept stock Delphi coils with GM PN 12558948 or aftermarket replacement.

Product Features:
  • 3.375 in. Height
  • Black Powder Coated Finish
  • For GM Gen III LS1
  • Cast Aluminum Material
  • Made In The USA
See More

Edelbrock – LS Series Coil Covers in Satin Finish (3-3/8" Overall Height) (Part No.4118)

LS Series Coil Covers in Satin Finish (3-3/8" Overall Height)

from

$336.99
Edelbrock sand cast aluminum LS Series Coil Covers part #4118 are a great way to dress up the LS1 in your street rod or muscle car. These coil covers are designed to eliminate the stock mounting brackets on transplanted LS1 engines by way of fitting coils

Product Features:
  • 3.375 in. Height
  • Satin Finish
  • For GM Gen III LS1
  • Cast Aluminum Material
  • Made In The USA
See More

Edelbrock – Supercharger Coil Covers #41143 For 10-15 Camaro SS W/Low Profile Top (Part No.41143)

Supercharger Coil Covers #41143 For 10-15 Camaro SS W/Low Profile Top

from

$459.99
Edelbrock part #41143 aluminum coil covers are designed for 2010-15 Camaro SS with an Edelbrock supercharger. Our kit is geared towards those with competition versions of the supercharger kits, which do not include coil covers, but would like to add them.
See More

Edelbrock – LS Series Coil Covers in Polished Finish (3-3/8" Overall Height) (Part No.41181)

LS Series Coil Covers in Polished Finish (3-3/8" Overall Height)

from

$468.99
Edelbrock part #41181 is a polished coil cover designed for the GM Gen III LS Motor. Our covers will mount to LS series motors with stock center bolt style valve covers and accept stock Delphi coils with GM PN 12558948 or aftermarket replacement. Design e

Product Features:
  • 3.375 in. Height
  • Polished Finish
  • For GM Gen III LS1
  • Cast Aluminum Material
  • Made In The USA
See More

ACDelco – IGNITION COIL MOUNTI (Part No.F3011582816ACD)

IGNITION COIL MOUNTI

from

$47.10
IGNITION COIL MOUNTI

Carquest Premium – Ignition Coil Mounting Bracket (Part No.MBA1001)

Ignition Coil Mounting Bracket

from

$11.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Accel – 8Mm Super Stock Graphite Uni (Part No.4041K)

8Mm Super Stock Graphite Uni

from

$72.99
ACCEL’s SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.

Product Features:
  • 7mm And 8mm High Gloss Silicone Jacket
  • 450 F Rated Silicone Jacket
  • Stainless Steel Plug Terminals
  • RFI Suppression For Street Driven Applications
  • Custom-fit Universal And Import Coverage
  • High-strength Fiberglass Braid Construction
  • Pre And Post HEI Vehicles
See More

Carquest Premium – Spark Plug Wire Set: 7 Wires, Increased performance, Designed for direct fit (Part No.35-6142)

Spark Plug Wire Set: 7 Wires, Increased performance, Designed for direct fit

from

$39.99
Product Features:
  • SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
  • Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
  • 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
  • EPDM inner insulation stops power-robbing voltage leaks.
  • With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
  • Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
  • Excellent interference suppression and consistent performance
  • Easy lock terminals for more convenient installation.
  • Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
  • Broad coverage available for most vehicles on the road today
  • Include grease pack to ensure easy installation and removal
See More

MSD Ignition – Wire Set; Super Conductor; 8-cyl. 90f Plug/90f Plug (Part No.31229)

Wire Set; Super Conductor; 8-cyl. 90f Plug/90f Plug

from

$129.99
Routing spark plug wires is an art form. It takes patience and time to route your wires away from the headers, through separators and to the distributor cap. Some wire sets fit perfect, but a lot of people want to build their own so they can route them exactly how they see fit. Our Universal spark plug wire sets come with the spark plug terminal and boot installed with the other end open. Distributor cap boots and terminals are included so you can cut the wire to the desired length, then install the terminal with the supplied Mini-Stripper-Crimper. It’s a little more work, but in the end it will be worth it.

Product Features:
  • Extra Long 8.5mm Wires So You Can Cut To Your Designed Length
  • Distributor Cap – Boots and Terminals Included
  • Incl. Mini-Stripper-Crimper
See More

Carquest Premium – Spark Plug Wire Set: 7 Wires, Increased performance, Designed for direct fit (Part No.35-6326)

Spark Plug Wire Set: 7 Wires, Increased performance, Designed for direct fit

from

$46.99
Product Features:
  • SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
  • Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
  • 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
  • EPDM inner insulation stops power-robbing voltage leaks.
  • With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
  • Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
  • Excellent interference suppression and consistent performance
  • Easy lock terminals for more convenient installation.
  • Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
  • Broad coverage available for most vehicles on the road today
  • Include grease pack to ensure easy installation and removal
See More

NGK – NGK Wire Set (Part No.51340)

NGK Wire Set

from

$44.49
NGK ultra-low resistance mag core wire sets provide outstanding performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. Stainless steel winding

Product Features:
  • PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
  • BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
  • STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
  • CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
See More

MSD Ignition – Wire Set; Super Conductor; Small Block Chevy with HEI Cap (Part No.35599)

Wire Set; Super Conductor; Small Block Chevy with HEI Cap

from

$129.99
The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

Product Features:
  • Less than 50 ohms per foot for superior spark
  • Ferro-magnetic impregnated core creates an effective EMI choke
  • 40 ft. Of Conductor Wound Into A Single Foot Of Wire
  • For high EMI suppression
  • Conductor core features Dupont Kevlar material
  • Proprietary compound sleeves for resistance to high heat/abrasion
See More

NGK – NGK Wire Set (Part No.51428)

NGK Wire Set

from

$39.49
NGK ultra-low resistance mag core wire sets provide outstanding performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. Stainless steel winding

Product Features:
  • PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
  • BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
  • STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
  • CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
See More

ACDelco – GM Original Equipment Ignition Wire Set (Part No.F1020434040ACD)

GM Original Equipment Ignition Wire Set

from

$77.89
Built to match the original equipment in length and fit, ACDelco OES Ignition Wire Sets also offer a performance advantage over many aftermarket products.

Product Features:
  • ACDelco OES wire sets are designed to be like Original in critical areas such as cable length and diameter, terminal design and insulator position
  • Have broad coverage available for most vehicles on the road today from 1980 to present
  • Provide a high degree of Radio Frequency Interference (RFI) suppression
  • Are designed to offer fit, form and function for optimum performance
  • Kevlar reinforced fiberglass core in select sets for increased strength
  • Core sheathed in radio-static absorbent material for increased RFI suppression
  • Wire-wound, stainless steel alloy conductor for maximum spark delivery and RFI suppression on most applications
  • A layer of conductive heat-resistant latex for added durability
  • Insulating rubber-based compound inner jacket helps minimize voltage drop and enhance durability
  • Thick silicone outer jacket for excellent heat resistance
  • Limited lifetime warranty*
See More

ACDelco – Original Equipment Direct Ignition Coil (Part No.F3005386155ACD)

Original Equipment Direct Ignition Coil

from

$127.83
The ACDelco Direct Ignition Coil is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces. To protect coils from the harsh operating environment, laminations are corrosion protected, and primary and secondary coil windings often feature molded plastic protection. These laminations are similar to the OE part.

Product Features:
  • OES and a direct fit application
  • Meets or exceeds the OES specifications for durability and performance
  • High profile insulation to prevent arching
  • Radio-Frequency Interference (RFI) Suppression
  • Engineered to withstand extremes in temperatures
See More

Carquest Premium – Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (Part No.EBC1787)

Ignition Coil: Meets or Exceeds OE Specifications, 1 Count

from

$57.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Built by IATF 16949 certified manufacturers for consistent durability
  • Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
  • Segmented secondary bobbins to distribute high voltage and prevent shorting
  • Extensive design validation testing to ensure long-lasting reliability
  • 100% end-of-line tested to ensure proper performance
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
See More

Carquest Premium – Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (Part No.EBC1475)

Ignition Coil: Meets or Exceeds OE Specifications, 1 Count

from

$25.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Built by IATF 16949 certified manufacturers for consistent durability
  • Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
  • Segmented secondary bobbins to distribute high voltage and prevent shorting
  • Extensive design validation testing to ensure long-lasting reliability
  • 100% end-of-line tested to ensure proper performance
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
See More

DENSO – Original Equipment Quality Direct Ignition Coil (Part No.673-7107)

Original Equipment Quality Direct Ignition Coil

from

$69.99
As the innovator and leader in stick coil technology, DENSO has conducted superior testing and inspection processes to insure the highest quality ignition coil. Don’t be fooled by imitations – look for the DENSO name to be sure you’re getting the best.
See More

E3 – High Output DiamondFIRE HEI Racing Coil (Part No.E3.623)

High Output DiamondFIRE HEI Racing Coil

from

$65.99
The E3 HEI Coil in Cap features a superior design that works with aftermarket performance 4-pin modules and high performance electronic controls. The coil’s resistance and inductance values have been optimized to match the high amperage dwell circuits of performance ignition modules for faster charging and full coil saturation at higher RPM levels, translating into better performance. High temperature epoxy resists shock and vibration while providing excellent thermal conductivity ensuring long service life. Specially designed to work with E3.1414 HEI Distributor.

Product Features:
  • Designed to with aftermarket 4-pin modules and high performance electronic controls
  • High temperature epoxy provides excellent thermal conductivity and long life
  • Maximum voltage of 48,000 volts
  • Crosses to MSD 8225
See More

Carquest Premium – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.EBC1111)

Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece

from

$94.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
  • 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
  • Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure confidence and product reliability, every time.
See More

Carquest Premium – Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (Part No.EBC1414)

Ignition Coil: Meets or Exceeds OE Specifications, 1 Count

from

$41.49
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Built by IATF 16949 certified manufacturers for consistent durability
  • Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
  • Segmented secondary bobbins to distribute high voltage and prevent shorting
  • Extensive design validation testing to ensure long-lasting reliability
  • 100% end-of-line tested to ensure proper performance
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
See More

Carquest Premium – Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (Part No.EBC1483)

Ignition Coil: Meets or Exceeds OE Specifications, 1 Count

from

$33.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Built by IATF 16949 certified manufacturers for consistent durability
  • Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
  • Segmented secondary bobbins to distribute high voltage and prevent shorting
  • Extensive design validation testing to ensure long-lasting reliability
  • 100% end-of-line tested to ensure proper performance
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
See More

2010 Chevrolet Camaro Ignition Coils and Boots

Maybe you’re in the middle of a full rebuild of that 2010 Chevrolet Camaro. Maybe you just need a couple of Ignition Coils and Boots. Either way, Advance Auto Parts has 35 different Ignition Coils and Boots in our inventory ranging from $14.99 to $499.99. That means you can find the exact parts or products you need to keep that 2010 Chevrolet Camaro running smoothly.

Ignition Coils and Boots are only as good as their brand. We stock 13 different brands to make sure you have plenty of trusted parts to choose from for your 2010 Chevrolet Camaro. Carquest, Carquest Premium, and ACDelco are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Ignition Coils and Boots for your 2010 Chevrolet Camaro, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 28 reviews in this category, some of the top rated parts include Ignition Coil with 4.8 stars.

So if you’re in the market for aftermarket Ignition Coils and Boots to keep your 2010 Chevrolet Camaro rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Ignition Coils and Boots Brands To Make Your 2010 Chevrolet Camaro Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2010 Chevrolet Camaro demands trusted brand parts and products to keep it running. Many trusted brands of Ignition Coils and Boots make up Advance Auto Parts’ inventory, and all are ready to help make your Camaro the best it can be. Be sure to browse some of our top Ignition Coils and Boots brands and parts.

Popular Carquest Ignition Coils and Boots

We carry Carquest parts in our stock across Ignition Coils categories, plus more. For a 2010 Chevrolet Camaro, our most popular Carquest Ignition Coils and Boots include:
Ignition Coil
from $67.05
(9)
Ignition Coil
Ignition Coils

FAQs for 2010 Chevrolet Camaro Ignition Coils and Boots

What are the most purchased Ignition Coils and Boots for the 2010 Chevrolet Camaro?

Out of 35 Ignition Coils and Boots for the 2010 Chevrolet Camaro, the most popular in our inventory are:
Ignition Coil: Meets OE Specifications, 1 Count
from $55.99
This product is not rated
Ignition Coil: Meets OE Specifications, 1 Count
Ignition Coils
Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece
from $69.99
This product is not rated
Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece
Ignition Coils
Ignition Coil
from $86.99
(1)
Ignition Coil
Ignition Coils

What are the top-rated 2010 Chevrolet Camaro Ignition Coils and Boots?

Top-rated Ignition Coils and Boots for your 2010 Chevrolet Camaro based on customer reviews/ratings are:
Ignition Coil
from $125.99
(4)
Ignition Coil
“your stores in pa. need to stock this part. i had to pick it up in maryland”