2010 BMW 335i xDrive Drivetrains

Essential 2010 BMW 335i xDrive Drivetrains

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6133)

Center Support Bearing Motor Mount: Center, 1 Piece

from

$83.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to BMW 06-17;. Please verify your application.

Product Features:
  • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
  • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
  • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
  • For Years: 2006-2017
  • Weight approx: 1 Lbs
  • BEARING ID / BORE: 1.1811 INCH / 30 MM
  • CENTERLINE: 0.45 INCH / 11 MM
  • MOUNT WIDTH: 6.30 INCH / 160 MM
  • STYLE: ROUND FRAME
  • WITH WINGS
See More

Corteco – Differential Side Cover Seal, 90 x 44 x 10 (Part No.J7041238121CFW)

Differential Side Cover Seal, 90 x 44 x 10

from

$20.42
Differential Side Cover Seal, 90 x 44 x 10

Original Equipment – DIFFERENTIAL DRAIN P (Part No.J7065433208OEA)

DIFFERENTIAL DRAIN P

from

$7.39
DIFFERENTIAL DRAIN P

Corteco – Pinion Seal (Part No.J7010481273CFW)

Pinion Seal

from

$12.58
Pinion Seal

Driveworks – Camshaft Seal (Part No.S-99139)

Camshaft Seal

from

$23.99
Product Features:
  • Brand may vary by location
See More

Febi – Axle Shaft Nut (Part No.K4030133883FEB)

Axle Shaft Nut

from

$12.32
The Febi Axle Shaft Nut is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Dorman – Rear Drive Shaft (Part No.986-401)

Rear Drive Shaft

from

$983.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Corteco – Input Shaft Seal (Part No.J1156287578CFW)

Input Shaft Seal

from

$16.08
Input Shaft Seal

GKN Drivetech – Axle Assembly (Part No.K4000240532GKN)

Axle Assembly

from

$517.52
Axle Assembly

Rein – Differential Plug (Part No.HWP0065)

Differential Plug

from

$7.99
Rein Automotive OE quality oil drain plugs are made with premium materials and designed and manufactured to be direct-fit replacements. Rein oil drain plugs are designed to tight tolerances to ensure proper sealing.

Product Features:
  • Designed to tight tolerances to ensure proper sealing.
  • Rein Oil Drain Plugs are coated for high corrosion resistance.
  • Designed and constructed to strict engineering quality standards.
  • Includes copper sealing gasket.
See More

Febi – CV Joint Boot Kit (Part No.K6010292557FEB)

CV Joint Boot Kit

from

$48.15
With Clamps and Grease The Febi CV Joint Boot Kit is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Vaico – CV Joint Boot Kit (Part No.K6010187213VCO)

CV Joint Boot Kit

from

$29.90
With Clamps and Grease The Vaico CV Joint Boot Kit is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Original Equipment – Transfer Case Flange (Part No.J7164686942OEA)

Transfer Case Flange

from

$313.12
Transfer Case Flange

Original Equipment – Transfer Case Flange (Part No.J7164686944OEA)

Transfer Case Flange

from

$305.73
Transfer Case Flange

Rein – CV Boot Kit (Part No.BKN0116)

CV Boot Kit

from

$34.99
Boot kits protect a joint in the car that would be destroyed by dirt, sand and other particles if left exposed, even under normal conditions so it’s important that they be properly maintained and in good condition. Rein automotive application specific inner and outer axle boot kits come complete with everything needed to do a proper installation, including OE grease and all the hardware needed for a guaranteed fit the first time.

Product Features:
  • Comes with all the needed hardware for the complete repair; clamps, washers, clips, etc.
  • Comes with the OE grease
  • Boot manufactured with highest quality materials to prevent cracking, wear and leaking
  • Matches original equipment design specifications
See More

GKN Drivetech – CV Boot Kit (Part No.K6010292557GKN)

CV Boot Kit

from

$72.20
With Clamps and Grease SPIDAN and LOBRO boots are specifically developed for the various joints – their accurate fit ensures optimum sealing of the joint. Up-to-date computerized equipment is used for the production of the boot.

Product Features:
  • For every specific application a boot kit to the OES standard
  • Reliable protection against damp and dirt
  • Optimum sealing and abrasion resistance
  • Manufactured according to DIN EN ISO 9001:2000
See More

Febi – Wheel Hub (Part No.K7000271577FEB)

Wheel Hub

from

$152.56
FEBI manufactures OE quality wheel hub assemblies that provide superior performance and durability.

Product Features:
  • OE Quality
  • High quality steel and surface finishes
  • Proper implementation of heat treatment
  • Precise engineered hub surface provide maximum load capacity and durability
See More

Whiteline – Differential Mount Bushing (Part No.KDT919)

Differential Mount Bushing

from

$94.99
Whiteline’s differential bushing solutions ensure pinion angles are maintained while delivering an improved gear shift resulting in reduced initial torque loss and greater power transfer to the wheels.

Product Features:
  • Featuring premium anodized alloy materials, Whiteline alloy products are anodized providing a long-lasting protective barrier to corrosion and wear but they look great too.
  • Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
  • Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
See More

Valvoline – MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No.VV324)

MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart

from

$12.79
Product Features:
  • High-performance seal conditioners maintain and preserve the elasticity of seals to help prevent leaks
  • Long-life friction modifiers and premium base oils help improve smooth shifting, eliminate slippage and shudder, prevent clutch wear and improve drivability longer than conventional fluids
  • Enhanced cleaning additives help reduce varnish formation and keep the transmission running properly longer
  • Engineered with a unique blend of viscosity modifiers and base oils to provide better oil flow at low temperatures and greater film protection at higher temperatures
See More

Valvoline – Import Multi-Vehicle Automatic Transmission Fluid, 1 Gallon (Part No.820681)

Import Multi-Vehicle Automatic Transmission Fluid, 1 Gallon

from

$36.99
Valvoline Import Multi-Vehicle Automatic Transmission Fluid is specifically formulated for use in most Toyota, Nissan, Honda and other imported vehicles. It is formulated with all synthetic base stocks and a proprietary additive system to ensure optimal transmission performance in a wide variety of vehicles. Valvoline Import Multi-Vehicle ATF can also be used in many domestic vehicles. It meets requirements of General Motors and Ford vehicles. Recommended for use in the following applications: Ford MERCON®, GM DEXRON®-II and DEXRON®-III, BMW LT 71141 and ETL-7045E, Nissan/Infiniti Nissan ATF, Matic-D, Matic-K and Matic-J, Mitsubishi Diamond SP-II and SP-III, Subaru ATF-HP, Hyundai/ KIA SP-II and SP-III , Toyota/Lexus Type T, T-III and T-IV , Honda/Acura ATF-Z1 (except in CVTs) , Mercedes Benz NAG1 , Volvo passenger car (except AW-1), and Volkswagen/Audi TL52162. For CVT applications Valvoline recommends Valvoline Full Synthetic CVT Fluid.

Product Features:
  • Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
  • Enhanced anti-shudder protection for smooth shifting and maximum power transfer
  • Developed with anti-wear technology to help improve transmission durability
  • Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
See More

Rein – Transfer Case Motor Assembly (Part No.TDA0001)

Transfer Case Motor Assembly

from

$664.99
Rein Automotive OE quality transfer case actuators are made to factory specifications ensuring proper fit, form and function. The transfer case actuator is a small motor attached to the case that proportions engine power to the front and rear differentials. High quality electronics and nylon gears are used to ensure a long service life. Our quality transfer case actuators aim to provide the professional repair technician and vehicle owner the peace of mind and trust that is expected from an OE quality component.

Product Features:
  • Rein OE quality transfer case actuators are the perfect replacement to meet the high demands placed on 4WD/AWD systems.
  • Direct OE replacement including mounting hardware.
  • Designed to engage or disengage the four wheel drive system as selected by the ECU of the vehicle.
  • Manufactured using high quality materials.
  • Restores functionality of 4WD/AWD system.
See More

Original Equipment – Transfer Case Motor (Part No.J7100466696OEA)

Transfer Case Motor

from

$668.20
Transfer Case Motor

National – Multi Purpose Seal (Part No.710745)

Multi Purpose Seal

from

$31.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Corteco – Axle Output Shaft Seal (Part No.K4062254230CFW)

Axle Output Shaft Seal

from

$21.60
You can expect original quality and a first-to-market range from Freudenberg, the inventor and the world’s leading Original Equipment manufacturer of radial shaft seals. As the aftermarket distribution arm of Freudenberg Group – the designer and OEM manufacturer of the Simmerrings – Corteco draws on the material and manufacturing expertise of its parent company and is able to deliver products with outstanding OE quality, distinguished by the high durability of their sealing properties. A new generation of innovative seals that help to reduce friction and fuel consumption is also available.

Product Features:
  • Machined rubber sealing edge provides greater accuracy and consistency, as well as a better sealing surface.
  • The flanged design allows for easier and proper installation and helps avoid cocking.
  • The latex bore coat seals the outer diameter leak path and helps compensate for minor bore imperfections.
  • Extra dust lip helps keep harmful contaminants, such as dirt, out of the bearing and protects against rust and corrosion.
See More

National – Multi Purpose Seal (Part No.710746)

Multi Purpose Seal

from

$23.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Corteco – Trans Case Output Sh (Part No.J7121670615CFW)

Trans Case Output Sh

from

$17.00
Trans Case Output Sh

2010 BMW 335i xDrive Drivetrains

You count on your 2010 BMW 335i xDrive to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 49 Drivetrains ranging in price from $2.45 to $985.99, you’re sure to find everything you need for your 2010 BMW 335i xDrive.

Brands matter. If you want to shop a specific Drivetrains brand, we stock 17 different brands like Valvoline, Carquest Premium, and Dorman. 2010 BMW 335i xDrive Drivetrains start as low as $2.45!

One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 457 extensive product reviews on 2010 BMW 335i xDrive Drivetrains.

Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 2010 BMW 335i xDrive below to get started!

Top-Rated Drivetrains Brands For Your 2010 BMW 335i xDrive

Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2010 BMW 335i xDrive running right for years to come. In our inventory you’ll find brands like Valvoline, Carquest Premium, Dorman, and even more.

Popular Valvoline Drivetrains

You’ll find popular Valvoline brand products across Differentials. All are waiting to get your 2010 BMW 335i xDrive back on the road. Some of the top-rated Valvoline products in these categories are:

FAQs for 2010 BMW 335i xDrive Drivetrains

What are the most purchased Drivetrains for the 2010 BMW 335i xDrive?

Out of 49 Drivetrains for the 2010 BMW 335i xDrive, the most popular in our inventory are:
CV Axle Shaft Assembly
from $102.99
(2)
CV Axle Shaft Assembly
Drive Shaft and Axles
CV Axle Shaft Assembly
from $99.99
(1)
CV Axle Shaft Assembly
Drive Shaft and Axles
Front Drive Shaft: OE Fix
from $378.99
This product is not rated
Front Drive Shaft: OE Fix
Drive and Prop Shaft Assemblies