2010 BMW 335i Shocks and Struts
More 2010 BMW 335i Shocks and Struts
Find your specific 2010 BMW 335i original or aftermarket Shocks and Struts below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 2010 BMW 335i Shocks and Struts
APA/URO Parts – Strut Bump Stop (Part No.L3036243238APA)
from
$10.04
APA/URO superior quality Bump Stop prevents the bottoming out of struts; ensuring a high level of protection and a longer strut life.
Product Features:
See More
Product Features:
- Made from premium quality cellular polyurethane
- Perfectly compliment OE style struts
- Are built with design and quality that matches or exceeds OE quality
APA/URO Parts – Strut Bump Stop (Part No.L3036243239APA)
from
$15.25
APA/URO superior quality Bump Stop prevents the bottoming out of struts; ensuring a high level of protection and a longer strut life.
Product Features:
See More
Product Features:
- Made from premium quality cellular polyurethane
- Perfectly compliment OE style struts
- Are built with design and quality that matches or exceeds OE quality
Rein – Strut Bump Stop (Part No.L3036439844RIN)
from
$16.87
Rein’s superior quality Bump Stop prevents the bottoming out of struts; ensuring a high level of protection and a longer strut life.
Product Features:
See More
Product Features:
- Made from premium quality cellular polyurethane
- Perfectly compliment OE style struts
- Are built with design and quality that matches or exceeds OE quality
KYB – Jounce Bumper and Bellows (Part No.SB110)
from
$24.29
KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.
Product Features:
See More
Product Features:
- Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
- Poly Foam Bumper Prevents The Strut From Bottoming Out
- Built With Design And Quality That Matches Or Exceeds One
- Protects The Upper Seal And Bushing
KYB – Jounce Bumper and Bellows (Part No.SB112)
from
$24.29
KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.
Product Features:
See More
Product Features:
- Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
- Poly Foam Bumper Prevents The Strut From Bottoming Out
- Built With Design And Quality That Matches Or Exceeds One
- Protects The Upper Seal And Bushing
- Designed And Built Specifically For Bows
Monroe – Shock-Mate Shock Absorber Boot Kit (Part No.SA1997)
from
$13.99
Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.
Product Features:
See More
Product Features:
- Protects the shock’s piston rod from damage
- Universal design for easy installation
- Tie-strap included for a secure fit
- Constructed from high quality urethane for maximum durability
- Multiple color choices available
Sachs – Suspension Strut Assembly, TwinTube Design (Part No.L3000393205SAC)
from
$168.98
SACHS Shocks and Struts are intelligently engineered to restore original handling dynamics while designed to meet the highest safety, comfort, performance and quality standards. SACHS products have the best dampening characteristics with an application-tu
Product Features:
See More
Product Features:
- TwinTube Design
Bilstein – B4 OE Replacement – Strut Assembly (Part No.L3000457495BIL)
from
$172.27
Finish: Black Paint Bilstein B4 OE Replacement gas pressure shock absorbers and struts are specifically engineered to be the best choice for maintaining the original ride quality of your vehicle, while meeting or exceeding OE standards. These dampers are the ideal choice for the driver looking to restore the original performance and handling of their vehicle, with the added benefit of world-famous Bilstein quality.
Product Features:
See More
Product Features:
- Constant damping characteristics under any load
- Consistent performance and handling give the vehicle a new car feel every time
- Proven BILSTEIN gas pressure technology
- High OEM quality standards
Bilstein – B8 Performance Plus – Strut Assembly (Part No.L3000443703BIL)
from
$434.02
Finish: Yellow Paint Bilstein B8 Performance Plus shock absorbers and struts deliver absolute mastery of the road surface for the performance-minded driver. Designed to push a car’s suspension to its performance peak, these shocks are specifically suited for use with special lowering springs in combination with anti-sway bars or other suspension upgrades.
Product Features:
See More
Product Features:
- Monotube gas pressure construction
- High-performance shock absorbers and struts designed specifically for lowering springs and production sport vehicle
- Sport-tuned with a high level of comfort
- Precision handling and optimized vehicle control
- Road-tested and fine-tuned by BILSTEIN The increased performance and aggressive valving of the Bilstein B8 Sport shocks significantly increase the rigidity of the vehicle and is not recommended for drivers who wish retain ride quality.
Monroe – Shock-Mate Shock Absorber Boot Kit (Part No.SA1998)
from
$13.29
Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.
Product Features:
See More
Product Features:
- Protects the shock’s piston rod from damage
- Universal design for easy installation
- Tie-strap included for a secure fit
- Constructed from high quality urethane for maximum durability
- Multiple color choices available
Febi – Febi Shock Bump Stop (Part No.L4041243559FEB)
from
$25.08
Febi’s superior quality Bump Stop prevents the bottoming out of struts; ensuring a high level of protection and a longer strut life.
Product Features:
See More
Product Features:
- Made from premium quality cellular polyurethane
- Perfectly compliment OE style shocks
- Are built with design and quality that matches or exceeds OE quality
Vaico – Q+ OE Quality Shock Bump Stop (Part No.L4041243565VCO)
from
$24.91
Vaico’s superior OE Quality Bump Stop prevents the bottoming out of struts; ensuring a high level of protection and a longer strut life.
Product Features:
See More
Product Features:
- Made from premium quality cellular polyurethane
- Perfectly compliment OE style shocks
- Are built with design and quality that matches or exceeds OE quality Q+ The Seal of Excellence
- ALWAYS OEM QUALITY
- ALWAYS MADE IN GERMANY
Lemfoerder – Shock Mount (Part No.L4010242851LEM)
from
$12.26
Shock Mount
Vaico – Nut (Part No.Y2002336709VCO)
from
$3.04
Nut
Bilstein – B6 Performance – Shock Absorber (Part No.L4000397046BIL)
from
$225.75
Bilstein B6 Performance gas pressure shock absorbers and struts are the ideal choice for most vehicles, including full-size sedans, SUVs and trucks. These shock absorbers and struts provide improved handling and stability, without sacrificing ride comfort. Bilstein B6 Performance shock absorbers offer superior damping ability that makes them ideal for the driver who demands superior performance, while maintaining an exceptional street ride.
Product Features:
See More
Product Features:
- Monotube gas pressure construction
- Improved safety and sportiness
- Added traction and enhanced stability
- Increased durability and performance while maintaining ride comfort
- Road-tested and fine-tuned by BILSTEIN for each vehicle specific application The performance of the Bilstein shocks does not decline from age, use or heat, requiring no compensating manual adjustments as with conventional multi-tube shocks.
Sachs – Shock Absorber (Part No.L40001144835SAC)
from
$111.14
Shock Absorber
Monroe – OESpectrum Passenger Car Shock Absorber (Part No.5681)
from
$90.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® passenger car shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.
Product Features:
See More
Product Features:
- REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
- EXCEPTIONAL HANDLING — Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
- CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
- CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
- IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
- Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
- 1/2 inch Diameter Piston Rod: Nitrocarburized rod for long service life. On non-dust shield units only.
- Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
- Premium – Limited Lifetime Warranty
- For Commercial Usage Refer to Product Warranty
Sachs – Suspension TwinTube Shock Absorber (Part No.L4000427142SAC)
from
$113.26
SACHS Shocks and Struts are intelligently engineered to restore original handling dynamics while designed to meet the highest safety, comfort, performance and quality standards. SACHS products have the best dampening characteristics with an application-tu
Product Features:
See More
Product Features:
- TwinTube Design
KYB – Shock Mount (Part No.L4010847882KYB)
from
$34.36
KYB Shock Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Shock Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB SHock Mounts and bearing plates have a reputation for providing the highest quality in the industry.
Product Features:
See More
Product Features:
- The highest quality replacement strut mount available
- Optimizes suspension performance by offering Original Equipment quality replacement components designed for each application
- Superior rubber reduces noise, vibration and harshness
- Mount bearings provide smoother steering and help retain front end alignment
- Matched grade studs and nuts
Dorman – Suspension Shock Mount (Part No.523-247)
from
$70.99
This replacement shock mount is designed to directly replace the mount that comes stock on specified vehicle years, makes and models. It is precisely reverse-engineered to ensure original equipment quality, fit and durability.
Product Features:
See More
Product Features:
- Direct replacement – this shock mount is precision-engineered to match the fit and durability of the original shock mount on specific vehicles
- Complete kit – all necessary mounting hardware is included with each mount
- Trustworthy construction – engineered in North America and backed by 100 years of automotive aftermarket experience
- Proactive repair – it’s often smart to replace shock mounts when replacing worn out shocks
Lemfoerder – Lemfoerder Shock Mount (Part No.L4010242853LEM)
from
$13.64
The Lemfoerder shock mount is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application
- OE style mounts and fasteners
- Resistant to oil and other contaminants
- Meets or exceeds OEM specifications
Autopart International Inc – Strut Mount (Part No.L30303157680API)
from
$102.04
Strut Mount
Lemfoerder – Strut Mount (Part No.L30303349499LEM)
from
$155.70
Strut Mount
Rein – Strut Mount (Part No.AVQ0711)
from
$113.99
Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts. Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation.
Product Features:
See More
Product Features:
- Rubber components match the shore hardness of the original equipment bushing to ensure maximum performance and product longevity.
- Manufactured to strict engineering standards/specifications in materials and tolerances.
- Rein also offers a full line of strut mount kits for the complete repair.
- Matches original equipment design specifications.
Rein – Strut Mount (Part No.AVQ0420P)
from
$21.99
Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts
Product Features:
See More
Product Features:
- Matches Original Equipment design specifications
- Rubber components match the shore hardness of the original equipment mount to ensure maximum performance and product longevity
- High corrosion resistance
Monroe – Strut-Mate Strut Mounting Kit (Part No.907985)
from
$26.99
Every new strut deserves a Monroe® Strut-Mate® Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.
Product Features:
See More
Product Features:
- PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
- REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
- REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
- RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
- EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily
Rein – Strut Mount (Part No.AVQ0372R)
from
$49.99
Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts
Product Features:
See More
Product Features:
- Manufactured to strict engineering standards/specifications in materials and tolerances
- Rubber components match the shore hardness of the original equipment mount to ensure maximum performance and product longevity
- High corrosion resistance
- All bearings included are produced by an Original Equipment manufacturer ensuring the highest quality and performance
Rein – Strut Mount (Part No.AVQ0447)
from
$68.99
Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts
Product Features:
See More
Product Features:
- Manufactured to strict engineering standards/specifications in materials and tolerances
- Rubber components match the shore hardness of the original equipment mount to ensure maximum performance and product longevity
- High corrosion resistance
Popular 2010 BMW 335i Shocks and Struts Categories
2010 BMW 335i Shocks and Struts
Maybe you’re in the middle of a full rebuild of that 2010 BMW 335i. Maybe you just need a couple of Shocks and Struts. Either way, Advance Auto Parts has 58 different Shocks and Struts in our inventory ranging from $3.04 to $434.21. That means you can find the exact parts or products you need to keep that 2010 BMW 335i running smoothly.
Shocks and Struts are only as good as their brand. We stock 14 different brands to make sure you have plenty of trusted parts to choose from for your 2010 BMW 335i. Monroe, Moog, and KYB are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Shocks and Struts for your 2010 BMW 335i, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 65 reviews in this category, some of the top rated parts include Suspension Strut Assembly, TwinTube Design with 4.0 stars and Suspension TwinTube Shock Absorber with 5.0 stars.
So if you’re in the market for aftermarket Shocks and Struts to keep your 2010 BMW 335i rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Shocks and Struts Brands To Make Your 2010 BMW 335i Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 2010 BMW 335i demands trusted brand parts and products to keep it running. Many trusted brands of Shocks and Struts make up Advance Auto Parts’ inventory, and all are ready to help make your 335i the best it can be. Be sure to browse some of our top Shocks and Struts brands and parts.
Popular Bilstein Shocks and Struts
We carry Bilstein parts in our stock across Rear Shock and Struts categories, plus more. For a 2010 BMW 335i, our most popular Bilstein Shocks and Struts include:
Top 2010 BMW 335i Shocks and Struts from Monroe
Monroe products are another trusted brand when it comes to Shocks and Struts for your 2010 BMW 335i. Popular Monroe parts include:
FAQs for 2010 BMW 335i Shocks and Struts
What are the most purchased Shocks and Struts for the 2010 BMW 335i?
Out of 58 Shocks and Struts for the 2010 BMW 335i, the most popular in our inventory are:
What are the top-rated 2010 BMW 335i Shocks and Struts?
Top-rated Shocks and Struts for your 2010 BMW 335i based on customer reviews/ratings are:
from
$168.98
(2)
Suspension Strut Assembly, TwinTube Design
“Currently running on my 240 wagon. Good low speed grab, even when cold. Virtually no noise. Low dust. No fade during high speed stops or on long d”
