2010 Audi S6 Brake Parts

Essential 2010 Audi S6 Brake Parts

ATE – Brake Pad Clip (Part No.N1065426948ATE)

Brake Pad Clip

from

$50.03
Brake Pad Clip

ATE – Cod Brake Disc (Rotor) (Part No.N1000264535ATE)

Cod Brake Disc (Rotor)

from

$106.15
ATE, a brand of Continental with more than 100 years of experience in brake development, is once again setting the standards in quality, innovation and system expertise. The high-carbon brake discs have a number of positive characteristics – they optimize durability and prevent, for example, brake judder and noise. With extremely low tolerances of max. 30 µm for lateral runout and max. 10 µm for thickness variation, ATE provides ideal aftermarket solutions in its role as a system supplier with OE expertise. The tolerances of the centering bores are also extremely low in order to prevent imbalance and radial runout. This contributes to extending the service life of the wheel suspension and wheel bearings. Depending on the vehicle model, mounting bolts are included with the brake discs at no extra charge. These mounting bolts are used to fix the brake disc to the wheel hub during installation. The bolt symbol on the brake disc label provides a clear indication that mounting bolts are included in the package. The mounting bolts included with ATE brake disc packages are always coated bolts, which reduces their susceptibility to corrosion and increases the longevity of the product. The MetaCote protective coating formulation is cured at approximately 572F. No grease or oil to remove. This helps protect against road salt, brake fluid and other corrosives – sheds water and dirt for clean appearance behind cast spoke wheels. Reduction in overall installation time.

Product Features:
  • OE-equivalent and a direct fit replacement.
  • Patented RotorLife wear indicator.
  • Optimum performance at all temperatures.
  • Reduced rotor wear.
  • less susceptible to noise and vibration.
  • MetaCote protective anti-corrosion coating.
See More

Sebro – Brake Disc (Part No.N10001094366SEB)

Brake Disc

from

$97.59
The Sebro coated brake disc is an OE-Quality replacement that is manufactured to withstand the higher demands of braking extremes from today’s high performance European vehicles. For the sustainable improvement of corrosion protection and also for good looking our break discs are silver grey coated in the pot- and outer diameter area. By the automatic coating process a high quality with steady coating thickness is guaranteed. In the uncoated areas all components are provided with suitable corrosion protection.

Product Features:
  • OE-Equivalent and Direct fit Application
  • high carbon content disc
  • Protective coating that resists corrosion
  • Provides a higher friction coefficient.
  • Resistant to vibrations and noise.
  • Improved thermal efficiency
See More

ATE – Brake Caliper Pin Boot Kit (Part No.N1042454212ATE)

Brake Caliper Pin Boot Kit

from

$18.14
ATE Continental is further extending its range of Brake Caliper Pin Boot Kits for ATE brake calipers. ATE caliper Pin Boot Kits are an essential component of ATE-designed fist floating brake calipers. The floating caliper consists of a holder and housing, which is located in rubber damping pins and sleeves.

Product Features:
  • Reduced cost
  • OE Quality
  • Complete Kit
See More

Carquest Wearever – Disc Pro Hardware Kit (Part No.13489Q)

Disc Pro Hardware Kit

from

$29.99
Brakes are designed as a system and all the parts need to work together for best performance. The braking system is arguably its most important system, so you want to be sure it’s working properly at all times. Brake clips are designed to push the pads away from the rotors when they aren’t being activated to prevent overheating and noise.

Product Features:
  • This part matches Original Equipment (OE) quality specifications which means that it is at least as good if not better than the original part the manufacturer supplied with the car
  • Low-friction PTFE coating to reduce drag
  • Maintains safe movement and effective stopping performance
  • Corrosion resistant coating for long-lasting durability against harsh roads
  • Manufactured with quality materials to suppress high stress levels
  • Helps deliver a quieter, more efficient braking system
  • Stainless Steel Dual Coated
See More

Carquest Wearever – Disc Brake Hardware Kit (Part No.13471)

Disc Brake Hardware Kit

from

$23.99
Brakes are designed as a system and all the parts need to work together for best performance. The kits provide advance protection for your brake by assuring brakes perform at an optimum level.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Exact fitment and original replacement
  • New Brake Hardware prevents premature wear and maximizes performance
  • Helps deliver a quieter, more efficient braking system
  • Manufactured with quality materials to suppress high stress levels
See More

Carquest Wearever – Disc Brake Caliper Guide Pin Boot Kit (Part No.8217A)

Disc Brake Caliper Guide Pin Boot Kit

from

$15.29
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. A complete brake job that includes new hardware goes a long way toward preventing comebacks. Changing out your Rubber Pin Boot or Slider Bushing Kit will ensure the guide pins are clean and free from debris for smoother braking.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Easy and fast replacement
  • Prevents noise and premature wear
  • Provides longer brake life and performance
See More

Carquest Wearever – Disc Brake Caliper Guide Pin Boot Kit (Part No.8235A)

Disc Brake Caliper Guide Pin Boot Kit

from

$6.49
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. A complete brake job that includes new hardware goes a long way toward preventing comebacks. Changing out your Rubber Pin Boot or Slider Bushing Kit will ensure the guide pins are clean and free from debris for smoother braking.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Easy and fast replacement
  • Maintains proper movement for safe, effective stopping performance
  • Prevents noise and premature wear
See More

Hella – Brake Vacuum Pump (Part No.N4050396236HEL)

Brake Vacuum Pump

from

$358.46
Brake Vacuum Pump

Cardone – Brake Master Cylinder Bleeding Tool (Part No.10-5000MCB)

Brake Master Cylinder Bleeding Tool

from

$15.99
CARDONE Master Cylinder Bench Bleeder Tool cuts typical bleeding procedures in half and is a more effective way to purge the brake system of air than other bleeding procedures. This handy, innovative tool is a must, just as bench bleeding is for removing all the air from your brake system, allowing you to spend less time in the garage, and more time on the road.

Product Features:
  • Each unit is 100% new, providing consistent performance when servicing your brake system
  • Easy to transfer for on-the-spot master cylinder bleeding
  • Fluid measurements clearly displayed on each unit in both ounces and milliliters for convenience
  • Easy to clean to ensure no cross contamination
  • Durability for long lasting performance
See More

Carquest Premium Gold – Semi-Metallic Brake Pads – (4-Pad Set) (Part No.GMKD915)

Semi-Metallic Brake Pads - (4-Pad Set)

from

$50.99
CARQUEST Wearever Gold brake pads are original equipment replacement brake pads that provide consistent, quiet and clean braking. CQ Wearever Gold brake pads are also manufactured by leading brake pad suppliers that OEM and OES heritage. Trust CQ Wearev

Product Features:
  • Application-specific formulations designed for extended pad life and clean wheels
  • Multi-layer shim for near silent braking
  • OE designed slots and chamfers for consistent performance
  • Hardware included on popular and late-model applications
See More

Carquest Professional Platinum – Ceramic Brake Pads – (4-Pad Set) (Part No.PXD840H)

Ceramic Brake Pads - (4-Pad Set)

from

$36.99
Carquest Platinum Professional brake pads are a premium alternative to original equipment brake pads that provide superior stopping performance, quieter braking and cleaner wheels. All CQ Platinum Professional brake pads are manufactured by a vertically

Product Features:
  • Industry leading number of application specific formulations for maximum performance, extended pad life, and clean wheels
  • On-vehicle testing similar to original equipment tests
  • Patented 4-layer HEX shim Technology provides silent braking
  • Burnishing compound allows for a proper break-in of pads and rotors
  • Hardware and caliper pin grease included where required to complete the job
See More

Vemo – Vemo Stop Light Switch (Part No.P3055336071VMO)

Vemo Stop Light Switch

from

$42.01
The Vemo Stop Light Switch is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Febi – Brake Hose Lock Clip (Part No.N7004946857FEB)

Brake Hose Lock Clip

from

$2.93
Brake Hose Lock Clip

ATE – ATE Brake Master Cylinder (Part No.N3000320591ATE)

ATE Brake Master Cylinder

from

$205.82
As the basis for a standardized ATE concept for future tandem master cylinders, ATE has developed a new plunger generation which has many technical enhancements and advantages.

Product Features:
  • Short closing paths
  • Low volume uptake
  • High efficiency
  • Low throttling / after-suction resistance
  • Low pressure differential between primary and secondary circuits
  • Good bleedability
  • Cr6-free surfaces for vehicles built from July 2007 (as required by law)
  • Central valve version suitable for ABS
  • Compact design – ideal for installation in small spaces
  • Reduced weight – by roughly 20% compared to conventional central valve technology
  • Fewer components – almost half as many as compared to conventional technologies
  • Modular system – diameters from 14.29 to 31.75mm and strokes up to 46mm
  • Low volume uptake – minimized elastic deformations due to smaller seals
  • Sealing cups supported in the housing – robustness against soiling and wear; longer life
  • Cr6-free surfaces for vehicles built from July 2007 (as required by law)
See More

TRW – Brake Master Cylinder (Part No.N3000134049TRW)

Brake Master Cylinder

from

$358.97
TRW Automotive supplies master cylinder brake actuation systems featuring quality and performance. TRW’s master cylinder product portfolio covers a wide range of vehicles, from small cars up to truck and SUV platforms. These systems can offer lighter weight, with options such as micro master cylinders and aluminum master cylinders through to heavy-duty master cylinders designed for the durability and variable loading conditions of the light-truck market. These systems function with the help of a series of brake fluid sensors, which are located on the reservoir tank. This series includes vacuum sensors, brake light switches, and travel sensors.

Product Features:
  • Low volume uptake
  • High efficiency
  • Low pressure differential between primary and secondary circuits
  • Good bleedability
  • Cr6-free surfaces for vehicles built from July 2007 (as required by law)
  • Central valve version suitable for ABS
See More

Wearever – Remanufactured Brake Master Cylinder (Part No.11-3051)

Remanufactured Brake Master Cylinder

from

$162.99
Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders are treate

Product Features:
  • Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
  • Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
  • Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
  • Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
  • Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
  • Plastic reservoirs are vacuum-tested to ensure they are leak free.
See More

Carquest Wearever – Brake Hydraulic Hose (Part No.BHA620159)

Brake Hydraulic Hose

from

$34.99
This automotive brake hydraulic hose was precision-engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting durability as part of a complete brake repair.

Product Features:
  • Ideal replacement – precision-engineered to match the performance of the original brake hose on specific vehicles
  • Position-specific – manufactured to precise measurements to provide an exact fit and easy installation
  • Quality assured – materials tested to exacting government-regulated safety and durability standards
  • Durable design – made with EPDM rubber and specially coated, corrosion-resistant fittings
See More

Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA620216)

Brake Hose Assembly: Copper Washers Included

from

$30.99
Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.

Product Features:
  • Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
  • Tensile minimum load holds up to 1800 N
  • All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
  • Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
  • Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
  • Brand may vary by location
See More

Carquest Wearever – BRAKE HOSE (Part No.BHA620158)

BRAKE HOSE

from

$21.99
This automotive brake hydraulic hose was precision-engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting durability as part of a complete brake repair.

Product Features:
  • Ideal replacement – precision-engineered to match the performance of the original brake hose on specific vehicles
  • Position-specific – manufactured to precise measurements to provide an exact fit and easy installation
  • Quality assured – materials tested to exacting government-regulated safety and durability standards
  • Durable design – made with EPDM rubber and specially coated, corrosion-resistant fittings
  • Brand may vary by location
See More

Carquest Wearever – Disc Brake Caliper Guide Pin Kit (Part No.14130)

Disc Brake Caliper Guide Pin Kit

from

$18.49
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. Caliper Guide Pins are important to replace because they hold the brake piston in place to create effective stopping performance.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Easy and fast replacement
  • Ensures the brake pads are meeting the rotors at the correct angle for an even braking system
  • Corrosion resistant coating for long-lasting durability against harsh roads
  • Manufactured with quality materials to suppress high stress levels
  • Helps deliver a quieter, more efficient braking system
See More

Dorman – Help – Oversized Brake Caliper Bolt (Part No.13894)

Oversized Brake Caliper Bolt

from

$25.49
This disc brake caliper bolt kit is designed to precisely tighten into stripped holes to easily repair the brake caliper or knuckle on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this disc brake caliper bolt kit is designed to precisely tighten into stripped holes to easily repair the brake caliper or knuckle on specified vehicles
  • Ideal solution – this kit provides is a reliable replacement for original hardware that has stripped
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Wearever – Disc Brake Caliper Guide Pin Kit (Part No.14239)

Disc Brake Caliper Guide Pin Kit

from

$12.99
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. Caliper Guide Pins are important to replace because they hold the brake piston in place to create effective stopping performance.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Easy and fast replacement
  • Ensures the brake pads are meeting the rotors at the correct angle for an even braking system
  • Corrosion resistant coating for long-lasting durability against harsh roads
  • Manufactured with quality materials to suppress high stress levels
  • Helps deliver a quieter, more efficient braking system
See More

Carquest Wearever – Disc Brake Caliper Guide Pin Kit (Part No.14212)

Disc Brake Caliper Guide Pin Kit

from

$11.99
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. Caliper Guide Pins are important to replace because they hold the brake piston in place to create effective stopping performance.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Easy and fast replacement
  • Ensures the brake pads are meeting the rotors at the correct angle for an even braking system
  • Corrosion resistant coating for long-lasting durability against harsh roads
  • Manufactured with quality materials to suppress high stress levels
See More

Carquest Standard – Brake Pads: Reliable and Dependable Stopping (Part No.NAD228)

Brake Pads: Reliable and Dependable Stopping

from

$22.99
Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price.

Product Features:
  • Dependable stopping power
  • Single layer shim for quiet braking
  • OE-designed slots and chamfers to reduce noise and vibration
  • Powder-coated backing plate prevents corrosion
See More

Carquest Professional Platinum – Brake Pads With Hardware, Semi-Metallic, Longer Life, Quiet (Part No.PMD1018H)

Brake Pads With Hardware, Semi-Metallic, Longer Life, Quiet

from

$60.99
Carquest Professional Platinum Euro brake pads are the optimal braking solution that provide an unmatched level of performance and reliability. These brake pads are engineered by an Original Equipment Manufacturer (O.E.M.) that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. We use an industry-leading number of friction formulations for maximum performance and extended pad life on each application. Carquest Professional Platinum brake pads also utilize a patented 4-layer HEX shim, now upgraded with aramid fibers, to provide quiet braking and reduce shim wear. We include the wear sensors for most European applications that require replacement. These brake pads are also supplied with coated brake hardware and caliper pin grease for nearly every application. Carquest Professional Platinum brake pads are the ideal choice when looking for shorter stopping distances, quiet braking and longer-lasting brakes.

Product Features:
  • Industry leading number of application specific formulations for maximum performance and extended pad life
  • On-vehicle testing similar to original equipment tests
  • Patented 4-Layer HEX Shim Technology provides quiet braking
  • HEX shim design utilizes aramid fibers, the same fibers used in bulletproof vests, to reduce shim wear
  • Burnishing compound allows for a faster break-in of pads and rotors
  • PTFE coated hardware and caliper pin grease included for nearly every application
  • Wear sensors included on most European applications that require replacement
  • Powder-coated backing plate prevents corrosion
See More

Carquest Standard – Brake Pads: Reliable and Dependable Stopping (Part No.MKD340)

Brake Pads: Reliable and Dependable Stopping

from

$33.99
Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price.

Product Features:
  • Dependable stopping power
  • Single layer shim for quiet braking
  • OE-designed slots and chamfers to reduce noise and vibration
  • Powder-coated backing plate prevents corrosion
See More

Wagner – ThermoQuiet Semi-Metallic Disc Brake Pad Set (Part No.MX1018)

ThermoQuiet Semi-Metallic Disc Brake Pad Set

from

$25.00
Wagner TQ® brake pads feature a zero-copper friction formulation and a unique Integrally Molded Insulator (IMI™) technology for quieter operation.

Product Features:
  • QUIET PERFORMANCE — Semi-metallic friction material engineered in-house to allow quiet operation and high performance
  • EXCEPTIONAL BRAKING POWER — Advanced friction formulations dissipate heat for superior braking performance
  • ONE-PIECE DESIGN — IMI™ technology integrates friction material, backing plate and insulator into the brake pad for select applications
  • HARDWARE INCLUDED — Premium stainless-steel hardware included for select applications
  • COMPREHENSIVE COVERAGE — Brake pads available for all vehicle types
  • ZERO COPPER FORMULATION — Features Wagner OE25™ zero-copper friction formulation
See More

2010 Audi S6 Brake Parts

You count on your 2010 Audi S6 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Brake Parts. With 25 Brake Parts ranging in price from $2.93 to $358.97, you’re sure to find everything you need for your 2010 Audi S6.

Brands matter. If you want to shop a specific Brake Parts brand, we stock 12 different brands like Carquest, Cardone, and Carquest Premium. 2010 Audi S6 Brake Parts start as low as $2.93!

One of the best ways to find top quality OEM or aftermarket Brake Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 35 extensive product reviews on 2010 Audi S6 Brake Parts.

Did we mention you can order your Brake Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Brake Parts inventory for your 2010 Audi S6 below to get started!

Top-Rated Brake Parts Brands For Your 2010 Audi S6

Trusted Brake Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2010 Audi S6 running right for years to come. In our inventory you’ll find brands like Carquest, Cardone, Carquest Premium, and even more.

Popular Carquest Wearever Brake Parts

You’ll find popular Carquest Wearever brand products across Brake Calipers and Brake Kits. All are waiting to get your 2010 Audi S6 back on the road. Some of the top-rated Carquest Wearever products in these categories are:
Disc Brake Caliper Guide Pin Kit
from $11.99
(1)
Disc Brake Caliper Guide Pin Kit
Brake Caliper Bolt and Pins
Disc Brake Caliper Guide Pin Boot Kit
from $6.49
(20)
Disc Brake Caliper Guide Pin Boot Kit
Brake Caliper Guide Pin Boot Kits