2010 Audi A5 Quattro Ignition and Tune-Up Products
More 2010 Audi A5 Quattro Ignition and Tune-Up Products Categories
If you’re looking for an original Ignition and Tune-Up Products replacement for a 2010 Audi A5 Quattro, you can search through our selection below. You’ll also find aftermarket and OEM Ignition and Tune-Up Products to meet your needs.
Essential 2010 Audi A5 Quattro Ignition and Tune-Up Products
Carquest Premium – Knock Sensor (Part No.SBC3897)
from
$58.99
Carquest Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All MotoRad Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
- Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
- Designed to meet or exceed all OEM specifications in fit, form & function
- Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.
Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBA4323)
from
$54.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Ignition Switch (Part No.CSC3574)
from
$128.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Autolite – Racing Resistor Spark Plug: Enables Performance, Handles Intense Conditions (Part No.AR3923)
from
$4.99
The ground electrode is cut-back from the center electrode to provide a gap. The face of the ground electrode is concave to provide a constant gap to the center electrode. This plug is designed use in all aftermarket cylinder heads used in different types of racing venues including oval and road racing.
Product Features:
See More
Product Features:
- Opens spark face for better ignitability of flame kernel
- Retains less heat, transfers heat to shell faster – reduces risk of pre-ignition
- Dyno testing has shown proven power gains
- Cut-back ground electrode evolved from practice of grinding back the side electrode
DENSO – Iridium Power Spark Plug: Maximum Spark Energy, 0.4mm Iridium Tip, IK16 (Part No.5303)
from
$11.79
Increased performance with World’s smallest Iridium Center Eletrode (0.4mm).
Product Features:
See More
Product Features:
- World’s smallest Iridium Center Electrode (0.4mm) for improved spark for maximum combustion
- Patented 360-degree laser welding assembly process
- U-groove and taper cut ground electrode to maximize flame propagation.
- Withstands temperatures greater than 4000┬░ Fahrenheit
- Burnished nickel plating for high temperature endurance and superior corrosion resistance
- Wide range of part numbers for thousands of applications, including classic and collector cars
- Iridium Power
- Superior Performance: Engineered for maximum performance under extreme conditions, this spark plug delivers more horsepower, faster and easier starts, and fewer misfires under heavy loads.
- Enhanced Fuel Efficiency: Thanks to its advanced design and patented technology, the Iridium Power plug improves fuel efficiency, making it an economical choice for your vehicle.
- Low Voltage Requirement: The DENSO Iridium Power spark plug requires 5,000 volts less to fire compared to conventional spark plugs, ensuring reliable ignition with lower energy consumption.
- Durable Iridium Material: Constructed with a durable iridium center electrode tip and a flat seat type, this spark plug offers long-lasting performance and reliability.
Bosch – Spark Plug (Part No.F10001184274BOS)
from
$18.00
Spark Plug
Beru – Spark Plug (Part No.F10001456527BER)
from
$20.68
BERU Platinum spark plugs have electrodes with platinum armoring ensure an extremely high burn-off resistance. The Beru Platinum spark plug is OEM Quality and is guaranteed to meet or exceed the vehicle manufacturers specifications for performance and durability.
Product Features:
See More
Product Features:
- Electrodes with platinum armoring ensure an extremely high burn-off resistance.
- High thermal conductivity and extremely high resistance to erosion.
- Optimal combustion: saves fuel and protects the catalytic converter.
- Long life, high dependability.
- Good cold starting properties.
- Excellent mixture access.
- First equipment quality. Where the burn-off resistance and ignition reliability need to be very high, automobile manufacturers such as BMW, Peugeot and Porsche use Beru spark plugs with platinum electrodes.
Autolite Iridium – Iridium XP Finewire Spark Plug: Improved Durability, More Focused Ignition (Part No.XP5325)
from
$9.99
Our best spark plug! Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Designed and engineered in the USA, the Autolite Iridium XP spark plugs feature an iridium-enhanced 0.6mm finewire design and patented platinum sidewire technology to provide better overall durability and a more focused ignition for enhanced ignitability and performance. Features double Iridium-enhanced alloy technology center electrode for improved durability and wear resistance.
Product Features:
See More
Product Features:
- 0.6 mm finewire design improves ignitability
- Patented V-trimmed platinum sidewire technology resists wear
- OE equivalent design is engineered for every engine
- Designed for better overall durability with virtually no gap erosion
- Double Iridium-Enhanced Alloy Technology Center Electrode: Offers improved durability and wear resistance for a longer-lasting spark plug.
- Designed and Engineered in the USA: Reflects over 100 years of Autolite’s engineering experience and expertise.
- Gasket Seat Type: Ensures a secure and proper fit for optimal performance.
Autolite – Double Platinum Spark Plug: Platinum Firing, Superior Durability, Longer Life (Part No.APP3923)
from
$6.79
With over 100 years of engineering expertise and over 11 billion plugs sold, Autolite delivers exceptional quality. Designed and engineered in the USA, these spark plugs feature platinum-to-platinum firing, virtually eliminating gap erosion and reducing misfires. The OE design and full-platinum tips on both the center and side electrodes ensure reduced gap wear, while the platinum ball welding process provides a consistent point of contact for enhanced adhesion. This results in optimized engine performance, longer life, and improved fuel economy. The gasket seat type further enhances the plug’s reliability and durability.
Product Features:
See More
Product Features:
- Works to optimize engine performance for a longer life and improved fuel economy
- OE design
- Full-platinum tips; platinum on both the center and side electrodes to promote reduced gap wear
- Platinum ball welding process provides a consistent point of contact for enhanced adhesion
- Gasket Seat Type: Equipped with a gasket seat type that enhances the spark plug’s reliability and durability.
- Proven Quality: Backed by over 100 years of engineering expertise and over 11 billion plugs sold, Autolite delivers exceptional quality and performance.
NGK – OE Series Laser Platinum Spark Plug: Fine Wire Tip Design, PFR6X-11 (Part No.5757)
from
$17.99
NGK Laser Platinum spark plugs provide high ignitability and longer service life compared to conventional nickel spark plugs. Laser Platinum plugs are tested to the highest standards to ensure quality and durability. Engineered specifically for OE applications. Laser platinum plugs provide stable idling, superior anti-fouling, improved fuel efficiency and lower emissions. High-grade pure alumina ceramic and 98% pure copper core prevents spark plug from overheating and provides reliable starts. Most Laser Platinum spark plugs feature a platinum pad on the ground electrode for even wear in distributorless ignition systems.
Product Features:
See More
Product Features:
- ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction fine wire platinum alloy center electrode provides consistent performance
- PLATINUM ALLOY CENTER ELECTRODE: Longer wearing and higher temperature resistance compared to traditional nickel spark plugs
- PLATINUM TIP GROUND ELECTRODE: Unless OE specified, platinum protection at the ground electrode provides excellent ignitability and service life
- SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
- TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
- RECOMMENDED USAGE: Best for vehicles with OE fine wire platinum alloy plugs
- High Ignitability and Longer Service Life: NGK Laser Platinum spark plugs offer superior ignitability and extended service life compared to conventional nickel spark plugs.
- Engineered for OE Applications: Specifically designed for Original Equipment (OE) applications, ensuring a perfect fit and optimal performance.
- Stable Idling and Superior Anti-Fouling: These spark plugs provide stable idling and superior resistance to fouling, enhancing overall engine performance.
- Improved Fuel Efficiency and Lower Emissions: Engineered to improve fuel efficiency and reduce emissions, contributing to a more environmentally friendly driving experience.
DENSO – U-Groove Spark Plug: OE Performance, lasts 30K+ Miles, K16R-U11 (Part No.3120)
from
$4.29
U-Groove design provides better ignitability for increased engine efficiency.
Product Features:
See More
Product Features:
- Patented U-groove ground electrode design fires leaner mixtures than conventional plugs
- Precision machine-rolled threads reduce seizing and cross-threading in delicate aluminum heads
- Wide range of part numbers for thousands of applications, including classic and collector cars
- Lasts twice as long as most conventional plugs
- 100% pre-fired to assure reliable operation
- U-Groove Conventional
Carquest Premium – Ignition Coil Set: Meets or Exceeds OE Specifications, 4 Count (Part No.EBC1001-4)
from
$99.99
Carquest Premium ignition coil sets meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coil sets are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coil sets with an industry-leading warranty. Carquest Premium ignition coil sets are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Built by IATF 16949 certified manufacturers for consistent durability
- Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
- Segmented secondary bobbins to distribute high voltage and prevent shorting
- Extensive design validation testing to ensure long-lasting reliability
- 100% end-of-line tested to ensure proper performance
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
DENSO – Original Equipment Quality Direct Ignition Coil (Part No.673-9303)
from
$44.49
As the innovator and leader in stick coil technology DENSO has conducted superior testing and inspection processes to insure the highest quality ignition coil. Don’t be fooled by imitations – look for the DENSO name to be sure you’re getting the best.
Product Features:
See More
Product Features:
- First Time Fit
- Built to DENSO Original Equipment Standards
NGK – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.48978)
from
$44.49
NGK ignition coils are manufactured to meet or exceed OE standards for the highest durability and operational performance, so they can be installed with confidence. NGK and their family of automotive products have over 80 year’s experience and are driven by extreme dedication to innovation, performance and quality. Developed and rigorously tested in our ISO 17025 accredited test lab under the most extreme conditions, NGK’s coil designs will outperform all others – far beyond operational environments a vehicle would actually experience
Product Features:
See More
Product Features:
- OE QUALITY: Vacuum-sealed premium epoxy resin and thermoplastic coil housings provide superior dielectric strength, voltage insulation and durability
- OPTIMAL PERFORMANCE: Precision coil windings and laminations maximize outputs, custom NGK ASIC chipset optimizes efficiency, prevents component damage
- EASE OF INSTALLATION: NGK Ignition Coils include ignition control module, premium high temperature coil boot, and jumper harnesses where required
- THE NGK DIFFERENCE: Featuring superior materials and design enhancements.
- EXTENSIVE TESTING: NGK ignition coils must pass extreme testing during manufacturing to ensure the highest quality and durability standards are met
- PRODUCT ENGINEERING: Advanced flow and stress modeling systems preemptively identify and avoid common failure points found in OE and competitor coils
Carquest – Ignition Coil (Part No.E1075)
from
$36.05
Intermotor® is a complete engine management import line that includes ignition and electrical relays, switches and sensors with a concentration on high technology categories such as computerized engine controls, fuel injection, and emission controls with coverage for every part number with an import nameplate. Intermotor® parts are unrivalled for quality, original fit, form, function, and coverage providing a genuine import part in every box. Intermotor® is the import leader by design.
Product Features:
See More
Product Features:
- 100% pure copper windings in primary and secondary bobbins improve durability and provide higher resistance to internal shorts and dielectric breakdown
- Electronic ignition module profile and feedback signal ensures proper OE fit, form, and function
- Thermoplastic housing withstands heat stress for enhanced durability
- Internal core made from grain-oriented electrical steel limits loss factor within magnetic circuit to reduce heat that may reduce coil endurance
- External core made from oriented silicon steel ensures durability and longevity
- Neodymium magnet produces max high voltage output at all speeds
- Stainless steel spring resists corrosion
- Tin-plated brass terminals improve electrical contact and protect against corrosion
Carquest Premium – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.EBC1001)
from
$33.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
- 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
- Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure confidence and product reliability, every time.
Bosch – Direct Ignition Coil – (Coil on Plug) (Part No.F30051368005BOS)
from
$45.82
High-performance ignition coils from Bosch guarantee a reliable voltage from the start, more ignition energy to ensure that your engine starts and runs smoothly. Bosch ignition systems combine the security of fully developed system engineering with the employment of the latest technology. The application of Bosch ignition coils ensures all advantages of the original equipment. Bosch Ignition coils provide more ignition energy to ensure that your engine starts well and runs smoothly. High-performance ignition coils from Bosch guarantee a reliable voltage from the start.
Product Features:
See More
Product Features:
- Demand controlled ignition voltage
- Long spark duration
- Better engine performance
- Reduced fuel consumption
- Reduced obnoxious emissions in exhaust gas
NGK – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.48728)
from
$54.99
NGK ignition coils are manufactured to meet or exceed OE standards for the highest durability and operational performance, so they can be installed with confidence. NGK and their family of automotive products have over 80 year’s experience and are driven by extreme dedication to innovation, performance and quality. Developed and rigorously tested in our ISO 17025 accredited test lab under the most extreme conditions, NGK’s coil designs will outperform all others – far beyond operational environments a vehicle would actually experience
Product Features:
See More
Product Features:
- OE QUALITY: Vacuum-sealed premium epoxy resin and thermoplastic coil housings provide superior dielectric strength, voltage insulation and durability
- OPTIMAL PERFORMANCE: Precision coil windings and laminations maximize outputs, custom NGK ASIC chipset optimizes efficiency, prevents component damage
- EASE OF INSTALLATION: NGK Ignition Coils include ignition control module, premium high temperature coil boot, and jumper harnesses where required
- THE NGK DIFFERENCE: Featuring superior materials and design enhancements.
- EXTENSIVE TESTING: NGK ignition coils must pass extreme testing during manufacturing to ensure the highest quality and durability standards are met
- PRODUCT ENGINEERING: Advanced flow and stress modeling systems preemptively identify and avoid common failure points found in OE and competitor coils
Carquest – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.26C1012)
from
$31.49
Carquest ignition coils meet original equipment (OE) fit, form and function and are built to ensure reliable starting and performance. Carquest ignition coils are tested to ensure proper spark and perfect fit for each application. These ignition coils are an affordable repair choice to restore the vehicle’s ignition system performance.
Product Features:
See More
Product Features:
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
- 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
- Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure confidence and product reliability, every time.
Carquest Premium – Ignition Coil Connector (Part No.PTA1566)
from
$19.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Carquest Premium – Ignition Coil Connector (Part No.HAC1004)
from
$31.49
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to
See More
Popular 2010 Audi A5 Quattro Ignition and Tune-Up Products Categories
2010 Audi A5 Quattro Ignition and Tune-Up Products
You count on your 2010 Audi A5 Quattro to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Ignition and Tune-Up Products. With 49 Ignition and Tune-Up Products ranging in price from $3.49 to $128.99, you’re sure to find everything you need for your 2010 Audi A5 Quattro.
Brands matter. If you want to shop a specific Ignition and Tune-Up Products brand, we stock 12 different brands like Autolite, NGK, and DENSO. 2010 Audi A5 Quattro Ignition and Tune-Up Products start as low as $3.49!
One of the best ways to find top quality OEM or aftermarket Ignition and Tune-Up Products is by asking professionals. Short of that, you can shop with confidence thanks to our 2,213 extensive product reviews on 2010 Audi A5 Quattro Ignition and Tune-Up Products. Some of the top-rated Ignition and Tune-Up Products products we carry are Platinum TT Spark Plug with Twin-Tip Design for Enhanced Ignition with 4.6 stars and Iridium Long-Life Spark Plug: OE Performance, last 100K+ Miles, SK16R11 with 4.9 stars.
Did we mention you can order your Ignition and Tune-Up Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Ignition and Tune-Up Products inventory for your 2010 Audi A5 Quattro below to get started!
Top-Rated Ignition and Tune-Up Products Brands For Your 2010 Audi A5 Quattro
Trusted Ignition and Tune-Up Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2010 Audi A5 Quattro running right for years to come. In our inventory you’ll find brands like Autolite, NGK, DENSO, and even more.
Popular ACDelco Ignition and Tune-Up Products
You’ll find popular ACDelco brand products across Spark Plugs. All are waiting to get your 2010 Audi A5 Quattro back on the road. Some of the top-rated ACDelco products in these categories are:
Top-Rated Autolite Iridium Ignition and Tune-Up Products
If Autolite Iridium are what you’re looking for, our inventory holds plenty. We stock Autolite Iridium brand Ignition and Tune-Up Products for your 2010 Audi A5 Quattro, and some of our most reviewed Autolite Iridium parts include:
from
$4.79
(149)
Platinum Spark Plug: Fires Cleaner, Easier Starts, Quicker Acceleration
Spark Plugs
from
$9.99
(141)
Iridium XP Finewire Spark Plug: Improved Durability, More Focused Ignition
Spark Plugs
from
$6.79
(55)
Double Platinum Spark Plug: Platinum Firing, Superior Durability, Longer Life
Spark Plugs
FAQs for 2010 Audi A5 Quattro Ignition and Tune-Up Products
What are the most purchased Ignition and Tune-Up Products for the 2010 Audi A5 Quattro?
Out of 49 Ignition and Tune-Up Products for the 2010 Audi A5 Quattro, the most popular in our inventory are:
from
$3.49
(53)
Copper Spark Plug: Delivers Quick Starts, Good Fuel Economy, Smooth Acceleration
Spark Plugs
What are the top-rated 2010 Audi A5 Quattro Ignition and Tune-Up Products?
Top-rated Ignition and Tune-Up Products for your 2010 Audi A5 Quattro based on customer reviews/ratings are:
from
$3.99
(105)
Platinum TT Spark Plug with Twin-Tip Design for Enhanced Ignition
“Perfect fit! Excellent product.”
from
$10.79
(103)
Iridium Long-Life Spark Plug: OE Performance, last 100K+ Miles, SK16R11
“good cleaner”
from
$10.99
(75)
Iridium TT Spark Plug: Ultimate Endurance and Power, 0.4mm Iridium Tip, last 100K+ Miles, IK16TT
“Excellent product.”
