2009 UD 1800HD Belts and Hoses
Find Your Specific 2009 UD 1800HD Belts and Hoses
Below you will find various in-demand UD Belts and Hoses, components and accessories for your 2009 1800HD. Advance Auto Parts has popular 1800HD parts like Engine Cooling Hoses, Pulleys, Serpentine and V Belts and more. You’ll also find aftermarket and OEM Belts and Hoses for other 1800HD model years including
2005,
2006,
2007,
2008 and more. Select a category of 2009 UD 1800HD Belts and Hoses below and start saving instantly.
Popular 2009 UD 1800HD Belts and Hoses Categories
Essential Belts and Hoses for 2009 UD 1800HDs
Gates – Hi-Power« II Classical Section Wrapped V-Belt (Part No.A38)
from
$13.99
Featuring a composite, multi-purpose construction, these belts resist oil and heat, ozone, sunlight, weather, and aging. Suitable for all industrial applications, including v-flat drives.
Product Features:
See More
Product Features:
- Smoother running with less slip and wear for excellent belt service life and reduced pulley wear
- High-quality rubber compound protects the belt against heat, ozone and sunlight
- Proprietary Flex-Weave cover is a patented fabric construction, providing extended protection to the belt core from oil, contaminants and heat for longer belt life
- Flex-bonded cords strongly adhere to the body of the belt, resulting in equal load distribution and absorption of bending stress, fatigue and shock loads without cord deterioration
- Meets RMA oil and heat resistant standards and static conductivity requirements
- Temperature Range: -22 Deg. F to +140 Deg. F (-30 Deg. C to +60 Deg. C)
- NOTE: Available in A, B, C, D and E cross-sections as well as Hi-Power II PowerBand V-belts
Dayco – Industrial V-Belts: 40 In. Outside Circumference, 0.5 In. Width (Part No.AP38)
from
$10.29
The Dayco industrial V-belt is more energy-efficient because it is more flexible. This Dayco belt offers the highest horsepower rating for longer service while its raw edge design resists slippage even at low-drive tensions. Designed for smaller more compact drives, Dayco industrial V-belts offer excellent oil and heat resistance, flexibility and static dissipation. Its special design allows for more efficient load carrying and higher horsepower capabilities.
Product Features:
See More
Product Features:
- Features high grade engineered polymer compounds to help resist heat, oil, and grease.
- Reliable performance over an extremely wide range of horsepower and RPM applications
- Manufactured to OEM specifications
Gates – V-Ribbed (Heavy Duty) Serpentine Belt: 54.5" Long, 8 Rib Count, Exact Fit (Part No.K080539HD)
from
$103.99
Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.
Product Features:
See More
Product Features:
- Patented material provides peak performance at prolonged extreme operating temperatures
- Heavy-duty construction resists cracking and wear, even at extreme temperatures
- Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
- Problem solver designed for the toughest applications
- Consistently outperforms other heavy-duty serpentine belts on the market
- Engineered to save your fleet money and reduce downtime
- Tensioner Replacement is Recommended (if equipped)
Dayco – Poly Rib Belt HD Serpentine Belt; 55.5 Long, 8 Rib Count, Heavy Duty (Part No.5080555)
from
$36.49
Produced for heavy-duty vehicles and buses with multiple accessories, Dayco HD poly-V belts are made from EPDM material to resist heat and are compliant with the latest standards, guaranteeing resistance, reliability, low noise and longer service life. Engineered for high torque and power pulses, these belts also feature specially treated cords within the belt to resist stretching and ensure length stability.
Product Features:
See More
Product Features:
- Engineered to handle operating conditions with temperatures up to 130°C (266°F)
- Designed for multiple accessories such as A/C, power steering pumps, alternators and water pumps
- Capable of delivering excellent performance in high torque and high power pulse applications
- Specially formulated treated cord insures length and tension stability on heavy duty diesel engine drives for the life of the belt
Gates – V-Ribbed (Heavy Duty) Serpentine Belt: 55.875" Long, 8 Rib Count, Exact Fit (Part No.K080553HD)
from
$74.99
Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.
Product Features:
See More
Product Features:
- Patented material provides peak performance at prolonged extreme operating temperatures
- Heavy-duty construction resists cracking and wear, even at extreme temperatures
- Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
- Problem solver designed for the toughest applications
- Consistently outperforms other heavy-duty serpentine belts on the market
- Engineered to save your fleet money and reduce downtime
- Tensioner Replacement is Recommended (if equipped)
Litens – Idler Pulley: Direct Fit, Steel, 80mm Diameter, w/ Hardware (Part No.900594A)
from
$108.99
This Litens pulley is manufactured by one of the largest original equipment pulley suppliers to ensure proper fit and performance. This pulley is produced for serpentine belt routing applications and is made of high strength steel for improved life and durability. This pulley conforms to original equipment material, tolerances, and specifications. This part fits Heavy Duty truck applications including 2008-10 UD Nissan 1800,2000,2300,2600,3300 with MD-230 Diesel and comes pre-assembled with a new installation bolt and dust shield. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More
Upgrade your 2009 UD 1800HD with Top-Quality Belts and Hoses
When it comes to maintaining or upgrading your 2009 UD 1800HD, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your UD or enhancing its overall performance, Belts and Hoses are key to keeping your 1800HD functioning at its best. At Advance Auto Parts, we offer a wide selection of 6 Belts and Hoses for the 2009 UD 1800HD, designed to meet your needs without breaking the bank.
From
Engine Cooling Hose
replacements to
Pulleys
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 2009 UD 1800HD at great prices.
Our Belts and Hoses inventory for this model
ranges from just $13.99 to $190.99, with
an average price of $103.49.
Our 6 Belts and Hoses in stock come from 2 trusted brands, so you’re sure to find the right part for your 2009 UD 1800HD without overspending.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals
and more to make sure your 2009 UD 1800HD is always ready to roll. We’re committed to providing you with everything you need to keep your 1800HD in top shape, all in one place.
Start shopping confidently below for your 2009 UD 1800HD!
Best-Selling Engine Cooling Hoses for 2009 UD 1800HDs
Enhance the driving experience in your UD with 1 quality Engine Cooling Hose components, starting at $190.99.
Gates – Premium Molded Coolant Hose (Part No.24010)
from
$190.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
Product Features:
See More
Product Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Most Popular 2009 UD 1800HD Pulleys
Customize your UD with 2 Pulleys products
like Idler Pulleys, all
priced under $108.99.
Litens – Idler Pulley: Direct Fit, Steel, 80mm Diameter, w/ Hardware (Part No.900594A)
from
$108.99
This Litens pulley is manufactured by one of the largest original equipment pulley suppliers to ensure proper fit and performance. This pulley is produced for serpentine belt routing applications and is made of high strength steel for improved life and durability. This pulley conforms to original equipment material, tolerances, and specifications. This part fits Heavy Duty truck applications including 2008-10 UD Nissan 1800,2000,2300,2600,3300 with MD-230 Diesel and comes pre-assembled with a new installation bolt and dust shield. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More
Gates – DriveAlign½ Belt Drive Idler/Tensioner Pulley (Part No.36355)
from
$92.99
Product Features:
See More
- Steel and thermoplastic construction designed to tight manufacturing tolerances for high durability and quality performance
- Built to last with a superior resistance to dirt, salt, chemicals and other under-hood contaminants
- OE-quality fit for virtually every domestic or import vehicle on the road today
- Bearings meet or exceed OE standards with application-specific speed and load requirements, to withstand high under hood temperatures
- Premium bearings eliminate bearing noise
- Mounting hardware included for some popular applications
- Reliable operation under severe conditions
Top Picks for 2009 UD 1800HD Serpentine and V Belts
Upgrade UD 1800HDs with top-quality Serpentine and V Belts parts, including 2 OEM and aftermarket selections for your 2009 model.
Gates – Hi-Power« II Classical Section Wrapped V-Belt (Part No.A38)
from
$13.99
Featuring a composite, multi-purpose construction, these belts resist oil and heat, ozone, sunlight, weather, and aging. Suitable for all industrial applications, including v-flat drives.
Product Features:
See More
Product Features:
- Smoother running with less slip and wear for excellent belt service life and reduced pulley wear
- High-quality rubber compound protects the belt against heat, ozone and sunlight
- Proprietary Flex-Weave cover is a patented fabric construction, providing extended protection to the belt core from oil, contaminants and heat for longer belt life
- Flex-bonded cords strongly adhere to the body of the belt, resulting in equal load distribution and absorption of bending stress, fatigue and shock loads without cord deterioration
- Meets RMA oil and heat resistant standards and static conductivity requirements
- Temperature Range: -22 Deg. F to +140 Deg. F (-30 Deg. C to +60 Deg. C)
- NOTE: Available in A, B, C, D and E cross-sections as well as Hi-Power II PowerBand V-belts
Gates – V-Ribbed (Heavy Duty) Serpentine Belt: 54.5" Long, 8 Rib Count, Exact Fit (Part No.K080539HD)
from
$103.99
Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.
Product Features:
See More
Product Features:
- Patented material provides peak performance at prolonged extreme operating temperatures
- Heavy-duty construction resists cracking and wear, even at extreme temperatures
- Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
- Problem solver designed for the toughest applications
- Consistently outperforms other heavy-duty serpentine belts on the market
- Engineered to save your fleet money and reduce downtime
- Tensioner Replacement is Recommended (if equipped)
In-Demand Radiator Hoses for 2009 UD 1800HDs
Select from 1 premium Radiator Hoses parts for your 2009 UD 1800HD.
Gates – Premium Molded Coolant Hose (Part No.24017)
from
$109.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
Product Features:
See More
Product Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
FAQs for 2009 UD 1800HD Belts and Hoses
Which Belts and Hoses are best-sellers for 2009 UD 1800HDs?
Out of 6 Belts and Hoses that fit 2009 UD 1800HDs, the following parts are the top sellers:
- Hi-Power« II Classical Section Wrapped V-Belt (11520282) – $13.99
- Idler Pulley: Direct Fit, Steel, 80mm Diameter, w/ Hardware (11561769) – $108.99
- Premium Molded Coolant Hose (10911503) – $190.99
What’s the price range for 2009 UD 1800HD Belts and Hoses?
Belts and Hose prices for the 2009 UD 1800HD start at $13.99 and go up to $190.99 for the most premium parts.
What’s the average price of a Belts and Hose for a 2009 UD 1800HD?
The average price for Belts and Hoses for the 2009 UD 1800HD is $103.49. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Belts and Hoses for other UD 1800HD model years?
What are the cheapest Belts and Hoses for my 2009 UD 1800HD?
The cheapest 2009 UD 1800HD Belts and Hoses we carry in stock are:
- Hi-Power« II Classical Section Wrapped V-Belt (11520282) – $13.99
- DriveAlign½ Belt Drive Idler/Tensioner Pulley (10912124) – $92.99
- V-Ribbed (Heavy Duty) Serpentine Belt: 54.5" Long, 8 Rib Count, Exact Fit (10913394) – $103.99
- Idler Pulley: Direct Fit, Steel, 80mm Diameter, w/ Hardware (11561769) – $108.99
- Premium Molded Coolant Hose (10911587) – $109.99
What types of Belts and Hoses do you sell for my 2009 UD 1800HD?
As of 2/5/25, these are some of the most in-demand types of Belts and Hoses for a 2009 UD 1800HD:
Can I get help with 2009 UD 1800HD Belts and Hose orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about UD Belts and Hoses and more.
What is your return policy for UD 1800HD Belts and Hoses?
Advance Auto Parts keeps returns simple. For new UD 1800HD Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
