2009 Toyota Prius Steering and Chassis Parts
Find Your Specific 2009 Toyota Prius Steering and Chassis Parts
Below you will find various in-demand Toyota Steering and Chassis Parts, components and accessories for your 2009 Prius. Advance Auto Parts has popular Prius parts like Tie Rods, Alignment Hardwares, Ball Joints and more. You’ll also find aftermarket and OEM Steering and Chassis Parts for other Prius model years including
2010,
2011,
2012,
2013,
2014,
2015,
2016,
2017,
2018 and more. Select a category of 2009 Toyota Prius Steering and Chassis Parts below and start saving instantly.
Popular 2009 Toyota Prius Steering and Chassis Parts Categories
Essential Steering and Chassis Parts for 2009 Toyota Priuses
Whiteline – Sway Bar 22Mm Heavy Duty (Part No.BTR77)
from
$282.99
Engineered to ‘Activate More Grip’, sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tyres thereby increasing cornering grip and improving outright performance. This Whiteline 22mm fixed position sway bar = more grip = better handling = outright performance – it’s the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tyre wear without affecting ride quality or comfort.
Product Features:
See More
Product Features:
- DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.
- Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Whiteline – Sway Bar Link (Part No.KLC169)
from
$165.99
Not many enthusiasts are aware that OEM and more importantly aftermarket sway bar effectiveness can be hindered by worn or inadequate mounts, drop links and lateral stoppers. Whiteline adjustable sway bar links are engineered to be up to the task with top spec, light weight componentry combined with a window of adjustability, eliminating sway bar preload on installation but most importantly ensuring the maximum output of the sway bar for improved grip and better handling.
Product Features:
See More
Product Features:
- By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
- Manufactured from high quality alloy and include heavy duty steel ball joint ends ensuring maximum strength and durability.
- Eliminate sway bar preload during installation and allow for on-car length adjustment of up to 25mm centre to centre.
- Heavy duty ball joints adjust and rotate to any angular combination for ease of fitment and optimum performance.
Rare Parts – Sway Bar Bushing (Part No.RP22337)
from
$21.29
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Restores vehicle handling
- Improves body roll
MOOG – Alignment Cam Bolt Assortment (Part No.CAM1A)
from
$434.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can solve excessive tire wear and steering issues
- Provides like-new steering, ease of installation and longer life
- Can bring vehicles back to factory specification
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
MOOG – Alignment Shim (Part No.K6660-4)
from
$11.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
MOOG – Alignment Shim (Part No.K6660-2)
from
$11.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
MOOG – Ball Joint (Part No.K500384)
from
$53.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- ENGINEERING EXCELLENCE — With 50+ dedicated engineers and 50+ patents, MOOG engineers every part with purpose
- STRONG AND DURABLE — Engineered to match or exceed OE requirements
- RESTORES RIDE — Provides revamped steering and handling feel
Rare Parts – Ball Joint (Part No.RP12758)
from
$125.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Heat treated components
- Dust seal to prevent contamination
- Restores vehicle handling
- Restores OE alignment
Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)
from
$20.79
Provides all necessary components for the proper reinstallation of an Imperial transmission oil cooler.
Product Features:
See More
Product Features:
- Transmission cooler reinstallation kit
- Contains part numbers 248001, 226201, 240250 and 4 hose clamps
- Provides all hardware for reinstallation of Imperial transmission coolers
- Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
Imperial – Power Steering Oil Cooler (Part No.241009)
from
$28.49
Product Features:
See More
- Power steering oil cooler
- 3/4″ x 2-1/2″ x 9″
- For vehicles with 3/8″ I.D. power steering return hose
- Removes destructive heat and prolongs power steering system life
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
Dorman – Suspension Axle Bushing (Part No.523-066)
from
$91.99
This axle pivot bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles.
- Reliable fit – precision-engineered to match the design and dimensions of original components.
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
MOOG – Camber Adjusting Kit (Part No.K100414)
from
$33.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Provides adjustment for camber and caster changes
- Greaseable design
- Easy to install
- Construction and design validated by MOOG engineers
- Provides improved steering and handling feel
- Long-lasting performance
MOOG – Camber Adjusting Kit (Part No.K929)
from
$48.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
Cardone – Remanufactured Rack and Pinion Assembly (Part No.1A-1000)
from
$838.99
Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE¿s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
Product Features:
See More
Product Features:
- 100% replacement of rubber sealing components.
- Application of specialized lubricant(s) for extended life.
- Finished in protective coating to prevent corrosion and rust.
- Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Maval – Complete Steering Rack, Remanufactured (Part No.M1000457294MAV)
from
$812.96
Maval Manufacturing is a Global leader in the production of remanufactured steering racks that meet or exceed the OE requirements set by the vehicle manufacturers. Maval uses only the highest quality OE parts in the remanufacturing process and each unit goes through a comprehensive inspection process that must meet OE performance specifications.
Product Features:
See More
Product Features:
- OE quality and direct fit replacement
- Remanufacture based on highest quality standards
- Computerized tests insure that all products meet the OE performance specification.
- Performance and quality approvals from OE steering gear and pump manufacturers world wide
Rare Parts – Tie Rod End (Part No.RP29250)
from
$97.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Restores OE alignment
- Reduces tire wear
- Improves steering response
MOOG – Tie Rod End (Part No.ES800842)
from
$87.99
Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
- PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Imperial – Transmission Oil Cooler Hose (Part No.248001)
from
$32.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Transmission oil cooler hose
- 11/32″ x 4-1/2′
- Designed for transmission fluid applications
- Made for tight-radius applications found in transmission cooler installations
- Compatible with 11/32 in. OEM cooler systems
- Tube made of black chemigum (nitrile)
- Reinforced with 2-spiral synthetic
- Covered in black Hypalon
- Compatible with 11/32 in. OEM cooler systems
- Tube made of black chemigum (nitrile)
- Reinforced with 2-spiral synthetic
- Covered in black Hypalon
Dorman – Suspension Control Arm And Ball Joint Assembly (Part No.526-515)
from
$185.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
Product Features:
See More
Product Features:
- Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
- Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
- Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed – additional coatings offer long-lasting rust and corrosion resistance
Dorman – Suspension Control Arm (Part No.524-151)
from
$125.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
Product Features:
See More
Product Features:
- Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
- Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
- Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed – additional coatings offer long-lasting rust and corrosion resistance
Carquest Premium – Stabilizer Bar Link (Part No.540-548439)
from
$22.79
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability. Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications. Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.
Product Features:
See More
Product Features:
- OE matched design for Form, Fit, and Function
- Advanced corrosion-resistant electro-coating to reduce rust
- Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
- Hex formed studs and/or wrench flats for ease of installation
- Hardware included for easier installation (where applicable)
Driveworks – Sway Bar Link Kit (Part No.DW-K80230)
from
$45.49
Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.
Product Features:
See More
Product Features:
- Gas shielded welding reinforcement ensure the safety of driving under poor road conditions
- Wrench flats at the base of the stud allow for the use of sockets for easy installation
Dorman – RACK BELLOW (Part No.541-499)
from
$24.99
RACK BELLOW
Beck/Arnley – Steering Rack Boot Kit (Part No.103-3085)
from
$18.49
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- One piece neoprene boot (this is not a split boot)
- Includes boot and two clamps for complete installation.
- Quality construction for durability
- Application specific for this vehicle
Carquest Premium – R and P Bellow Kit (Part No.250-713093)
from
$23.49
CARQUEST PREMIUM Chassis parts are engineered and benchmarked to Original Equipment (OE) performance standards. CARQUEST PREMIUM Chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability. CARQUEST PREMIUM Chassis has been rigorously quality-tested, meeting or exceeding OE specifications. CARQUEST PREMIUM Chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.
Product Features:
See More
Product Features:
- OE matched design for Form, Fit, and Function
- Engineered to protect steering rack from road contamination
- Hardware included for easier installation (where applicable)
Driveworks – Camber Bolt Kit (Part No.DW-K929)
from
$29.49
Driveworks Brand Camber Cam Bolt Kit is mainly used for car chassis suspension system
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Precision engineered for improved ride and superior performance
- Performance tested to ensure durability
Driveworks – Camber Cam Bolt Kit (Part No.DW-K90477)
from
$24.49
Driveworks cam bolts easily install in place of the factory lower control arm mounting bolts.
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Precision engineered for improved ride and superior performance
- Performance tested to ensure durability
Driveworks – Control Arm Cam Bolt Kit (Part No.DW-K90208)
from
$21.79
Driveworks Brand Control Arm Cam Bolt Kits are made to meet OE specifications. They work with the sway bar to reinforce the suspension system, preventing excessive body roll. Driveworks Brand chassis parts help ensure improved steering response.
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Precision engineered for improved ride and superior performance
- Performance tested to ensure durability
Upgrade your 2009 Toyota Prius with Top-Quality Steering and Chassis Parts
When it comes to maintaining or upgrading your 2009 Toyota Prius, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Toyota or enhancing its overall performance, Steering and Chassis Parts are key to keeping your Prius functioning at its best. At Advance Auto Parts, we offer a wide selection of 43 Steering and Chassis Parts for the 2009 Toyota Prius, designed to meet your needs without breaking the bank.
From
Tie Rod
replacements to
Alignment Hardware
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Steering and Chassis Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Steering and Chassis Parts for your 2009 Toyota Prius at great prices.
Our Steering and Chassis Parts inventory for this model
ranges from just $11.49 to $434.99, with
an average price of $78.72.
Our 43 Steering and Chassis Parts in stock come from 15 trusted brands, so you’re sure to find the right part for your 2009 Toyota Prius without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2009 Toyota Prius, we stock popular OEM and aftermarket Steering and Chassis Parts from top names
like Imperial, Driveworks, Moog, and more.
Imperial Steering and Chassis Parts
start at just $11.49 and boast an impressive 4 stars average rating from customers.
Driveworks and Moog also bring quality to the table, with Steering and Chassis Parts available starting at $11.49, and at an average 4 stars rating.
With 532 customer reviews and counting, our 2009 Toyota Prius Steering and Chassis Parts have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Steering and Chassis Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2009 Toyota Prius is always ready to roll. We’re committed to providing you with everything you need to keep your Prius in top shape, all in one place.
Start shopping confidently below for your 2009 Toyota Prius!
Best-Selling Tie Rods for 2009 Toyota Priuses
Enhance the driving experience in your Toyota with 8 quality Tie Rod components, starting at $35.79.
MOOG – Tie Rod End (Part No.ES80303)
from
$56.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Loose or worn chassis parts can lead to premature tire wear
- Exclusive cover plate protects against contaminants leaking into the bearing surface
- Greaseable socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear
- Patented cover plate design allows for tighter tolerances vs traditional designs for a more durable part
- Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength
- Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength
MOOG – Tie Rod End (Part No.EV80304)
from
$103.99
Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Wrench flats on housing and stud provide easy installation and alignment adjustment
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- Polished Stud ball provides low socket torque.
- Stud design is optimized to provide ideal stud swing and strength for each application.
MOOG – Tie Rod End (Part No.ES80302)
from
$56.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Loose or worn chassis parts can lead to premature tire wear
- Exclusive cover plate protects against contaminants leaking into the bearing surface
- Greaseable socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear
- Patented cover plate design allows for tighter tolerances vs traditional designs for a more durable part
- Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength
- Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength
Beck/Arnley – Outer Tie Rod End (Part No.101-6042)
from
$60.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- Coated or plated for corrosion protection
- Ball joint is pre-greased
- Easy access wrench flat allows for the use of a socket for easy installation and removal
- Full ball stud
Beck/Arnley – Tie Rod End (Part No.101-5885)
from
$62.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- Coated or plated for corrosion protection
- Ball joint is pre-greased
- Easy access wrench flat allows for the use of a socket for easy installation and removal
- Full ball stud
CTR – CTR Tie Rod End (Part No.M3010194768CTR)
from
$56.82
CTR is an O.E.M. suspension parts manufacturer for Korean vehicles and a leading supplier for Japanese, American, and European vehicles in the worldwide aftermarket. CTR uses an advances triple heat treat process for the body and ball stud to extend longer life and enhance stable performance. CTR manufactures the ball joint using the latest OE polymer encapsulation technology.
Product Features:
See More
Product Features:
- Lower preload at assembly, less friction
- No lubrication required in service
- Less service wear
- Longer service life
Autopart International Inc – Tie Rod End (Part No.M30102071472API)
from
$35.79
Tie Rod End
Autopart International Inc – Tie Rod End (Part No.M30101968905API)
from
$35.79
Tie Rod End
Most Popular 2009 Toyota Prius Alignment Hardwares
Customize your Toyota with 6 Alignment Hardware products
like Alignment Shims and
Alignment Camber Bolt Assortments, all
priced under $434.99.
MOOG – Alignment Shim (Part No.K100143)
from
$23.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
MOOG – Alignment Shim (Part No.K6660-1)
from
$11.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
MOOG – Alignment Shim (Part No.K6660-2)
from
$11.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
MOOG – Alignment Shim (Part No.K6660-3)
from
$11.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
MOOG – Alignment Shim (Part No.K6660-4)
from
$11.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
MOOG – Alignment Cam Bolt Assortment (Part No.CAM1A)
from
$434.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can solve excessive tire wear and steering issues
- Provides like-new steering, ease of installation and longer life
- Can bring vehicles back to factory specification
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
Top Picks for 2009 Toyota Prius Ball Joints
Upgrade Toyota Priuses with top-quality Ball Joints parts, including 5 OEM and aftermarket selections for your 2009 model.
MOOG – Ball Joint (Part No.K500384)
from
$53.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- ENGINEERING EXCELLENCE — With 50+ dedicated engineers and 50+ patents, MOOG engineers every part with purpose
- STRONG AND DURABLE — Engineered to match or exceed OE requirements
- RESTORES RIDE — Provides revamped steering and handling feel
Dorman – Suspension Control Arm (Part No.524-152)
from
$125.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
Product Features:
See More
Product Features:
- Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
- Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
- Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed – additional coatings offer long-lasting rust and corrosion resistance
Dorman – Suspension Control Arm (Part No.524-151)
from
$125.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
Product Features:
See More
Product Features:
- Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
- Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
- Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed – additional coatings offer long-lasting rust and corrosion resistance
Rare Parts – Ball Joint (Part No.RP11300)
from
$95.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Heat treated components
- Dust seal to prevent contamination
- Restores vehicle handling
- Restores OE alignment
CTR – Ball Joint (Part No.L2020138538CTR)
from
$53.60
Every CTR ball joint is engineered to restore the handling of your vehicle to original equipment condition.
Product Features:
See More
Product Features:
- OE expertise and quality
- Precision manufactured housing and components
- Corrosion protection
- Permanently attached boot
- One-piece forged housing for easier steering
- Ball joint kits include new pinch bolt, nut and other necessary parts for attachment
In-Demand Sway Bars for 2009 Toyota Priuses
Select from 11 premium Sway Bars parts for your 2009 Toyota Prius, with prices ranging from $18.99 to $282.99.
MOOG – Stabilizer Bar Link (Part No.K80230)
from
$66.99
Backed by superior materials and rigorous testing, MOOG sway bar links deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Wrench flats ensure easy installation and removal
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT — Sealed boot shields internal components from wear-causing contaminants
- STRONG AND DURABLE — Thick connecting rod adds strength while metal bearings and rubber preload deliver long life
- PREMIUM MATERIALS — Made from premium materials for long-lasting dependability
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Driveworks – Sway Bar Link Kit (Part No.DW-K80230)
from
$45.49
Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.
Product Features:
See More
Product Features:
- Gas shielded welding reinforcement ensure the safety of driving under poor road conditions
- Wrench flats at the base of the stud allow for the use of sockets for easy installation
Carquest Premium – Stabilizer Bar Link (Part No.644-75894)
from
$54.99
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability. Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications. Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.
Product Features:
See More
Product Features:
- OE matched design for Form, Fit, and Function
- Advanced corrosion-resistant electro-coating to reduce rust
- Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
- Hex formed studs &/or wrench flats for ease of installation
- Hardware included for easier installation (where applicable)
MOOG – Stabilizer Bar Bushing Kit (Part No.K200705)
from
$18.99
Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
- EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
- HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
CTR – Sway Bar Link (Part No.L1030140417CTR)
from
$45.86
The CTR Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application
- Reduces squeaks, rattles, and vibration noise
- Resistant to oil and other contaminants
- Meets or exceeds OEM specifications
Whiteline – Sway Bar 22Mm Heavy Duty (Part No.BTR77)
from
$282.99
Engineered to ‘Activate More Grip’, sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tyres thereby increasing cornering grip and improving outright performance. This Whiteline 22mm fixed position sway bar = more grip = better handling = outright performance – it’s the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tyre wear without affecting ride quality or comfort.
Product Features:
See More
Product Features:
- DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.
- Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Whiteline – Sway Bar Link (Part No.KLC169)
from
$165.99
Not many enthusiasts are aware that OEM and more importantly aftermarket sway bar effectiveness can be hindered by worn or inadequate mounts, drop links and lateral stoppers. Whiteline adjustable sway bar links are engineered to be up to the task with top spec, light weight componentry combined with a window of adjustability, eliminating sway bar preload on installation but most importantly ensuring the maximum output of the sway bar for improved grip and better handling.
Product Features:
See More
Product Features:
- By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
- Manufactured from high quality alloy and include heavy duty steel ball joint ends ensuring maximum strength and durability.
- Eliminate sway bar preload during installation and allow for on-car length adjustment of up to 25mm centre to centre.
- Heavy duty ball joints adjust and rotate to any angular combination for ease of fitment and optimum performance.
Whiteline – Sway Bar Link (Part No.W23185)
from
$69.99
Knock, knock, knock! That’s the sound you hear when your sway bar links are not doing their job. Links are a common service item due to either worn or over compliant bushings/ joints and possibly bent or snapped centre bodies. Upgrade from the old units to Whiteline sway bar links with superior features that outlast and outperform the original equipment.
Product Features:
See More
Product Features:
- By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
ACDelco – Advantage Suspension Stabilizer Bar Link (Part No.L1030627048ACD)
from
$68.82
ACDelco Advantage Suspension Stabilizer Bar Links connect the ends of your vehicle’s stabilizer bar near the wheels, and allow the bar to function in controlling body roll. These replacement components contain a forged CNC-machined shell, compressed bushing material, case-hardened studs, and constant-torque pivot joints for high-quality performance, strength, and durability. ACDelco Advantage Suspension Stabilizer Bar Links offer quality at an economical price.
Product Features:
See More
Product Features:
- Undergo impact, wear, and fatigue testing to help ensure quality and durability
- Coated for corrosion resistance and long life
- Greasable design where applicable, for easy maintenance and longevity
- Dust boot is re-installed and permanently attached to reduce contamination, and increase durability and service life
- Forged CNC-machined shell provides high-quality, precision-made performance and additional strength
- Case-hardened studs with rolled threads for strength and cleanliness
- Heat-treated forging for enhanced part quality and durability
TRW – Stabilizer Link (Part No.L1030140417TRW)
from
$60.61
TRW stabilizer links are manufactured from aluminum, corrosion resistant steel or glass-fiber reinforced plastic to match the Original Equipment design, which provides improved fuel economy, lower emissions and excellent driving comfort.
Product Features:
See More
Product Features:
- Manufactured from aluminum, corrosion resistant steel or glass-fiber reinforced plastic to match OE design
- Provides improved fuel economy, lower emissions and excellent driving comfort
- Reduce weight and damping vibrations
- Proven steel versions when the glass fiber material is unsuitable due to loading conditions or space restrictions
Rare Parts – Sway Bar Bushing (Part No.RP22337)
from
$21.29
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Restores vehicle handling
- Improves body roll
Most Sold 2009 Toyota Prius Power Steering Parts
Explore our best-selling Toyota parts for the 2009 Prius among 9 OEM and aftermarket options starting from $11.49.
Imperial – Mounting Kit System (Part No.226201)
from
$11.49
Product Features:
See More
- Imperial mounting kit system
- For installation of transmission coolers and electric fans
- Provides quick, effective installation of Imperial products
- Contains nylon mounting rods, foam pads and locking buttons
- Atermarket electric fan and cooler mounting rods
- Made with the highest quality materials
- Quality machined for durability
- Removable buttons for relocation
Imperial – Transmission Oil Cooler Hose (Part No.248001)
from
$32.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Transmission oil cooler hose
- 11/32″ x 4-1/2′
- Designed for transmission fluid applications
- Made for tight-radius applications found in transmission cooler installations
- Compatible with 11/32 in. OEM cooler systems
- Tube made of black chemigum (nitrile)
- Reinforced with 2-spiral synthetic
- Covered in black Hypalon
- Compatible with 11/32 in. OEM cooler systems
- Tube made of black chemigum (nitrile)
- Reinforced with 2-spiral synthetic
- Covered in black Hypalon
Imperial – Power Steering Oil Cooler (Part No.241009)
from
$28.49
Product Features:
See More
- Power steering oil cooler
- 3/4″ x 2-1/2″ x 9″
- For vehicles with 3/8″ I.D. power steering return hose
- Removes destructive heat and prolongs power steering system life
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)
from
$20.79
Provides all necessary components for the proper reinstallation of an Imperial transmission oil cooler.
Product Features:
See More
Product Features:
- Transmission cooler reinstallation kit
- Contains part numbers 248001, 226201, 240250 and 4 hose clamps
- Provides all hardware for reinstallation of Imperial transmission coolers
- Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
Cardone – Remanufactured Rack and Pinion Assembly (Part No.1G-2660)
from
$264.99
Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE¿s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
Product Features:
See More
Product Features:
- 100% replacement of rubber sealing components.
- Application of specialized lubricant(s) for extended life.
- Finished in protective coating to prevent corrosion and rust.
- Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
EMPI – Steering Rack Boot Kit (Part No.M1030380142EMP)
from
$22.82
Steering Rack Boot Kit
Atlantic Automotive Eng – NEW RACK & PINION (Part No.6965N)
from
$434.99
NEW RACK & PINION
Rare Parts – R & P BELLOWS (Part No.RP57350)
from
$40.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Protects Rack & Pinion surfaces from contamination
- Hardware included
Dorman – RACK BELLOW (Part No.541-499)
from
$24.99
RACK BELLOW
Top-Rated Steering and Chassis Parts Brands For Your 2009 Toyota Prius
Shop for the best-rated brands offering Steering and Chassis Parts and other products for your 2009 Toyota Priuses. Below you’ll find some of our best rated Steering and Chassis Parts from Imperial, Driveworks, and Moog, and more. Steering and Chassis Parts from these brands that fit a 2009 Prius start at just $11.49 and are rated as high as 4 stars. OEM and aftermarket Steering and Chassis Parts don’t get more top quality, durable, and affordable than from the brands below.
Popular Imperial 2009 Toyota Prius Steering and Chassis Parts
When it comes to maintaining or upgrading your 2009 Toyota Prius, using quality Steering and Chassis Parts is essential to ensure durability and a perfect fit. Imperial ticks all of those boxes. We offer a wide selection of Imperial Steering and Chassis Parts, specifically designed for the 2009 Toyota Prius. With over 4 Imperial brand Steering and Chassis Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $11.49, with an average price of just $23.32. Plus, with over 208 customer reviews and an average rating of 4 stars, you can trust that our Imperial Steering and Chassis Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$11.49
$11.49
(27)
“Perfect for my transmission cooler holds it very good in place”
Popular Driveworks 2009 Toyota Prius Steering and Chassis Parts
Driveworks auto parts is one of the highest quality Steering and Chassis Part brands in the market. Any 2009 Toyota Prius owner should feel confident when installing genuine Driveworks parts in their vehicle. To ensure the best fit and performance for your 2009 Prius, Advance Auto Parts carries a full inventory of 2 Driveworks Steering and Chassis Parts. Plus you will be keeping your Toyota in peak condition while saving money because prices on these Driveworks Steering and Chassis Parts range from $21.79 to $45.49, plus, with more than 33 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Steering and Chassis Parts below will deliver on both quality and value.
FAQs for 2009 Toyota Prius Steering and Chassis Parts
Which Steering and Chassis Parts are best-sellers for 2009 Toyota Priuses?
Out of 43 Steering and Chassis Parts that fit 2009 Toyota Priuses, the following parts are the top sellers:
- Sway Bar Link Kit (10194755) – $45.49
- Stabilizer Bar Link (20517376) – $66.99
- Stabilizer Bar Link (12097300) – $54.99
What’s the price range for 2009 Toyota Prius Steering and Chassis Parts?
Steering and Chassis Part prices for the 2009 Toyota Prius start at $11.49 and go up to $434.99 for the most premium parts.
What’s the average price of a Steering and Chassis Part for a 2009 Toyota Prius?
The average price for Steering and Chassis Parts for the 2009 Toyota Prius is $78.72. Keep in mind the variety of part types within our Steering and Chassis Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Steering and Chassis Parts for other Toyota Prius model years?
What are the cheapest Steering and Chassis Parts for my 2009 Toyota Prius?
The cheapest 2009 Toyota Prius Steering and Chassis Parts we carry in stock are:
- Mounting Kit System (6014844) – $11.49
- Alignment Shim (20516418) – $11.49
- Alignment Shim (20516449) – $11.49
- Alignment Shim (20516426) – $11.49
- Alignment Shim (20516428) – $11.49
What are the top-rated Steering and Chassis Parts that fit the 2009 Toyota Prius?
Out of 532 reviews by customers, our 2009 Toyota Prius Steering and Chassis Parts have an average customer rating of . These are some of the highest-rated Steering and Chassis Part types for the 2009 Toyota Prius and their top-rated products:
- Tie Rods
- Tie Rod End (20519964) – $56.99
- Tie Rod End (20519903) – $103.99
- Tie Rod End (20519955) – $56.99
- Sway Bars
- Tie Rod End (20519964) – $56.99
- Tie Rod End (20519903) – $103.99
- Tie Rod End (20519955) – $56.99
What types of Steering and Chassis Parts do you sell for my 2009 Toyota Prius?
As of 2/5/25, these are some of the most in-demand types of Steering and Chassis Parts for a 2009 Toyota Prius:
Can I get help with 2009 Toyota Prius Steering and Chassis Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Toyota Steering and Chassis Parts and more.
What is your return policy for Toyota Prius Steering and Chassis Parts?
Advance Auto Parts keeps returns simple. For new Toyota Prius Steering and Chassis Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
