2009 Pontiac G5 Power Steering Parts

Essential 2009 Pontiac G5 Power Steering Parts

Carquest Premium – Steering Angle Sensor Connector (Part No.PTA2167)

Steering Angle Sensor Connector

from

$101.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • CarQuest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
See More

Cardone – Power Steering Assist Motor (Part No.1C-18010M)

Power Steering Assist Motor

from

$115.99
CARDONE Remanufactured Power Steering Assist Motor Modules are engineered to meet or exceed O.E. performance. Units are calibrated and tested to ensure proper function and long-lasting performance, providing you a quality product you and your vehicle can rely on.

Product Features:
  • Each unit is built and calibrated to O.E.M. electronic and electrical specifications
  • Every unit is 100% computer tested to ensure O.E.M. performance
  • Vehicle diagnostic codes are specific to each component
  • Built to meet or exceed O.E.M. performance
  • Designed for easy installation and setup
See More

Cardone – P/S Assist Motor/ Mo (Part No.M2103901535CAR)

P/S Assist Motor/ Mo

from

$115.46
Cardone Remanufactured Power Steering Assist Motor Modules are engineered to meet or exceed O.E. performance. Units are calibrated and tested to ensure proper function and long-lasting performance, providing you a quality product you and your vehicle can rely on.

Product Features:
  • 100% computerized hydraulic testing is performed for proper flow, leakage and performance to ensure perfect fit and function
  • All critical components (i.e. campacs, spool valves, etc.) are triple tested to ensure product reliability
  • All units are built with 100% new seals and o-rings
  • Units are supplied with 100% tested and calibrated pressure relief valves
  • Shafts are 100% processed to ensure surface finish is within O.E. tolerances
See More

EMPI – re Steering Rack Boot (Part No.M10101317635EMP)

re Steering Rack Boot

from

$16.69
The Empire Steering Rack Boot is a high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Manufactured to meet or exceed OE specifications
See More

Rare Parts – R & P BELLOWS (Part No.RP57359)

R & P BELLOWS

from

$14.29
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Protects Rack & Pinion surfaces from contamination
  • Hardware included
See More

Factory Air – Transmission Oil Cooler Replacement Hose (Part No.53015)

Transmission Oil Cooler Replacement Hose

from

$14.49
Covered in black Hypalon
See More

Imperial – Transmission Oil Cooler Hose (Part No.248001)

Transmission Oil Cooler Hose

from

$32.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:
  • Transmission oil cooler hose
  • 11/32″ x 4-1/2′
  • Designed for transmission fluid applications
  • Made for tight-radius applications found in transmission cooler installations
  • Compatible with 11/32 in. OEM cooler systems
  • Tube made of black chemigum (nitrile)
  • Reinforced with 2-spiral synthetic
  • Covered in black Hypalon
  • Compatible with 11/32 in. OEM cooler systems
  • Tube made of black chemigum (nitrile)
  • Reinforced with 2-spiral synthetic
  • Covered in black Hypalon
See More

Imperial – Power Steering Oil Cooler (Part No.241009)

Power Steering Oil Cooler

from

$28.49
Product Features:
  • Power steering oil cooler
  • 3/4″ x 2-1/2″ x 9″
  • For vehicles with 3/8″ I.D. power steering return hose
  • Removes destructive heat and prolongs power steering system life
  • Compatible with OEM cooler systems
  • Ultrasonically soldered for reliability
  • 100% pressure testing to 150 PSI for quality assurance
  • High efficiency turbulators
See More

Cardone – Rack and Pinion Assembly (Part No.1G-1811)

Rack and Pinion Assembly

from

$317.99
Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.

Product Features:
  • 100% replacement of rubber sealing components.
  • Application of specialized lubricant(s) for extended life.
  • Finished in protective coating to prevent corrosion and rust.
  • Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
See More

Cardone – Rack and Pinion Assembly (Part No.1G-1815)

Rack and Pinion Assembly

from

$195.99
Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.

Product Features:
  • 100% replacement of rubber sealing components.
  • Application of specialized lubricant(s) for extended life.
  • Finished in protective coating to prevent corrosion and rust.
  • Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
See More

Cardone – Electronic Rack and Pinion {Complete} – Domestic (Part No.23-1811)

Electronic Rack and Pinion {Complete} - Domestic

from

$302.99
A1 CARDONE Remanufactured Rack and Pinion units are built to meet or exceed OEM performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested using state of the art testing equipment, to ensure proper function, providing a reliable, long-lasting, product both you and your vehicle can rely on.

Product Features:
  • Protective coating applied to each unit, where applicable, to extend the life of the unit
  • 100% performance testing to ensure perfect fit, function and reliable performance
  • 100% computerized hydraulic testing, where applicable, for proper flow, leakage and performance ensures perfect fit and function
  • Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life
  • 100% new O.E.M. style O-rings and lip seals ensure no leaking and long-lasting performance, where applicable
  • All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance, where applicable
  • Manual rack and pinions are supplied with premium-quality bearings help to deliver a smoother steering experience
  • Valve housings, where applicable, have polished micro-finish sleevings for durability
  • Built to meet or exceed O.E.M. performance
See More

PWR – New Manual Rack and Pinion (Part No.45-1169)

New Manual Rack and Pinion

from

$601.99
Direct Fit – to make installation easy; All units are USA Engineering Approved; PWR Pumps, Racks, Gears & Reservoirs are 100% tested for leaks, pressure, noise and function

Product Features:
  • PWR Rack and Pinions are 100% NEW and Engineered In North America
  • All PWR products are Designed, Tier-Manufactured, and Multi-Tested to meet or exceed OE Performance and Durability Requirements
  • Features our EXCLUSIVE INDUSTRIAL GRADE PACKAGING, Tie Rod and Pinion Shaft Thread Protectors, Sealed Heavy Duty Plastic Enclosures, and Fluid Port Caps
  • Includes: Factory Installed OE Mounting Bushings, Inner Tie Rods, Jam Nuts (as required), and Installation Instructions
  • Precision Routed and Constructed Fluid Transfer Tubes
  • Manufactured to meet or exceed OE requirements
  • Engineering, test, and quality validation in the USA
See More

Cardone – Electronic Rack and Pinion {Complete} – Domestic (Part No.23-1815)

Electronic Rack and Pinion {Complete} - Domestic

from

$151.99
A1 CARDONE Remanufactured Rack and Pinion units are built to meet or exceed OEM performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested using state of the art testing equipment, to ensure proper function, providing a reliable, long-lasting, product both you and your vehicle can rely on.

Product Features:
  • Protective coating applied to each unit, where applicable, to extend the life of the unit
  • 100% performance testing to ensure perfect fit, function and reliable performance
  • 100% computerized hydraulic testing, where applicable, for proper flow, leakage and performance ensures perfect fit and function
  • Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life
  • 100% new O.E.M. style O-rings and lip seals ensure no leaking and long-lasting performance, where applicable
  • All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance, where applicable
  • Manual rack and pinions are supplied with premium-quality bearings help to deliver a smoother steering experience
  • Valve housings, where applicable, have polished micro-finish sleevings for durability
  • Built to meet or exceed O.E.M. performance
See More

2009 Pontiac G5 Power Steering Parts

Maybe you’re in the middle of a full rebuild of that 2009 Pontiac G5. Maybe you just need a couple of Power Steering Parts. Either way, Advance Auto Parts has 14 different Power Steering Parts in our inventory ranging from $14.29 to $601.99. That means you can find the exact parts or products you need to keep that 2009 Pontiac G5 running smoothly.

Power Steering Parts are only as good as their brand. We stock 8 different brands to make sure you have plenty of trusted parts to choose from for your 2009 Pontiac G5. Imperial, Cardone, and EMPI are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Power Steering Parts for your 2009 Pontiac G5, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 362 reviews in this category, some of the top rated parts include Electronic Rack and Pinion {Complete} – Domestic with 5.0 stars and Transmission Oil Cooler Replacement Hose with 3.0 stars.

So if you’re in the market for aftermarket Power Steering Parts to keep your 2009 Pontiac G5 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Power Steering Parts Brands To Make Your 2009 Pontiac G5 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2009 Pontiac G5 demands trusted brand parts and products to keep it running. Many trusted brands of Power Steering Parts make up Advance Auto Parts’ inventory, and all are ready to help make your G5 the best it can be. Be sure to browse some of our top Power Steering Parts brands and parts.

Popular Imperial Power Steering Parts

We carry Imperial parts in our stock across Power Steering Coolers categories, plus more. For a 2009 Pontiac G5, our most popular Imperial Power Steering Parts include:
Transmission Oil Cooler Hose
from $32.49
(94)
Transmission Oil Cooler Hose
Power Steering Coolers
Power Steering Oil Cooler
from $28.49
(83)
Power Steering Oil Cooler
Power Steering Coolers

FAQs for 2009 Pontiac G5 Power Steering Parts

What are the most purchased Power Steering Parts for the 2009 Pontiac G5?

Out of 14 Power Steering Parts for the 2009 Pontiac G5, the most popular in our inventory are:
Rack and Pinion Assembly
from $317.99
(1)
Rack and Pinion Assembly
Rack & Pinions
Rack and Pinion Assembly
from $195.99
This product is not rated
Rack and Pinion Assembly
Rack & Pinions
Electronic Rack and Pinion {Complete} - Domestic
from $151.99
This product is not rated
Electronic Rack and Pinion {Complete} – Domestic
Rack & Pinions

What are the top-rated 2009 Pontiac G5 Power Steering Parts?

Top-rated Power Steering Parts for your 2009 Pontiac G5 based on customer reviews/ratings are:
Electronic Rack and Pinion {Complete} - Domestic
from $302.99
(2)
Electronic Rack and Pinion {Complete} – Domestic
“nice fit”
Transmission Oil Cooler Replacement Hose
from $14.49
(1)
Transmission Oil Cooler Replacement Hose
“This looks to be a well made hose and has Gates stamped on the hose itself. In general, I prefer Gates branded hoses. 11/32″ is an odd size hose. Th”