2009 Mercedes-Benz C350 Brake Parts

Essential 2009 Mercedes-Benz C350 Brake Parts

ATE – Brake Master Cylinder (Part No.N3000472768ATE)

Brake Master Cylinder

from

$264.39
As the basis for a standardized ATE concept for future tandem master cylinders, ATE has developed a new plunger generation which has many technical enhancements and advantages.

Product Features:
  • Short closing paths
  • Low volume uptake
  • High efficiency
  • Low throttling / after-suction resistance
  • Low pressure differential between primary and secondary circuits
  • Good bleedability
  • Cr6-free surfaces for vehicles built from July 2007 (as required by law)
  • Central valve version suitable for ABS
  • Compact design – ideal for installation in small spaces
  • Reduced weight – by roughly 20% compared to conventional central valve technology
  • Fewer components – almost half as many as compared to conventional technologies
  • Modular system – diameters from 14.29 to 31.75mm and strokes up to 46mm
  • Low volume uptake – minimized elastic deformations due to smaller seals
  • Sealing cups supported in the housing – robustness against soiling and wear; longer life
  • Cr6-free surfaces for vehicles built from July 2007 (as required by law)
See More

Elring – Oil Drain Plug Gasket (Part No.A612044453ELR)

Oil Drain Plug Gasket

from

$1.21
Oil Drain Plug Gasket

Carquest Premium Gold – Brake Pad Set – Gold Semi-Metallic (Part No.GMKD872)

Brake Pad Set - Gold Semi-Metallic

from

$59.99
Carquest Premium Gold brake pads are original equipment replacement brake pads that provide consistent, quiet, and clean braking.

Product Features:
  • Application-specific formulations designed for extended pad life and clean wheels
  • Multi-layer shim for near silent braking
  • OE designed slots and chamfers for consistent performance
  • Hardware included on popular and late-model applications
See More

Febi – Parking Brake Cable (Part No.N5010470074FEB)

Parking Brake Cable

from

$32.28
Parking Brake Cable

Carquest Wearever – Disc Brake Caliper Guide Pin Kit (Part No.H5025)

Disc Brake Caliper Guide Pin Kit

from

$7.49
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. Caliper Guide Pins are important to replace because they hold the brake piston in place to create effective stopping performance.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Easy and fast replacement
  • Helps deliver a quieter, more efficient braking system
  • Corrosion resistant coating for long-lasting durability against harsh roads
  • Manufactured with quality materials to suppress high stress levels
See More

Carquest Premium – Engine Camshaft Position Sensor Connector (Part No.PTA1226)

Engine Camshaft Position Sensor Connector

from

$40.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Dorman – Anti-Lock Brake System Tone Ring (Part No.917-570)

Anti-Lock Brake System Tone Ring

from

$23.99
This ABS wheel speed sensor tone ring directly replaces the original equipment tone ring on certain vehicle years, makes and models for a cost-effective fix.

Product Features:
  • Direct replacement – this ABS tone ring matches the fit and function of the stock part on certain vehicle applications
  • Effective fix – addresses ABS failure caused by cracked, corroded or fatigued original ring
  • Thoroughly tested – on-vehicle and laboratory testing ensures trouble-free operation
  • Trustworthy quality – backed by team of designers and engineers in the United States
See More

Febi – Brake Caliper Bolts (Part No.N1041757581FEB)

Brake Caliper Bolts

from

$5.98
Eliminate the replacement of costly steering knuckles, as well as time spent drilling, tapping or rethreading the mounting holes, with Febi’s Disc Brake Caliper Bolt Kit.

Product Features:
  • OE Quality
  • Save time, money and labor by replacing only the Disc Brake Caliper Bolt – instead of the entire caliper bracket or knuckle
  • Pre-coated with thread lock to prevent loosening
See More

Carquest Wearever – Parking Brake Shoes (Part No.S816)

Parking Brake Shoes

from

$29.99
Wearever brake shoes are 100% new OE replacement brake shoes and come with coated steel to guard against rust, salt and road grime. Wearever brake shoes provide exceptional stopping power, virtually noise free and exact fitment to the original equipment brake shoes.

Product Features:
  • Wearever Brake Shoes come bonded or riveted based on OE design.
  • Wearever Brake Shoes are coated to prevent rust.
  • Wearever Brake Shoes are 100% New not remanufactured.
  • Brand may vary by location
See More

Corteco – Brake Hose (Part No.N7000293380CFW)

Brake Hose

from

$18.66
Safety that you can rely on: CORTECO brake hoses CORTECO offers a full range of brake hoses in original quality with maximum reliability. Brake hoses are used in every car brake system and should be checked during each maintenance job. They are regarded as one of the most important components in vehicle brake systems. Therefore, CORTECO brake hoses are engineered and designed to OE quality standards. Expertise in leading-edge technology ensure the high quality standards of CORTECO brake hoses. CORTECO brake hoses are suitable for all brake fluids (DOT 3, DOT 4, DOT 4 LV, DOT 5.1)

Product Features:
  • High durability
  • Low volume expansion
  • 100% high pressure tested and certified quality
See More

Carquest Platinum Painted – Painted Brake Rotor Meets or Exceeds OE Specs, Features RotorShield (Part No.YH200845P)

Painted Brake Rotor Meets or Exceeds OE Specs, Features RotorShield

from

$83.99
Carquest Platinum painted brake rotors meet or exceed original equipment (O.E.) specifications, delivering superior stopping power with proper harmonic design and non-directional finish that eliminate noise. Carquest Platinum painted rotors feature RotorShield, a rust-inhibiting barrier that provides up to 5 times more protection than non-painted rotors. The RotorShield barrier is applied to the rotor hat to protect from unsightly rust and help maintain a like-new appearance. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of the pads and rotors. Carquest Platinum painted brake rotors are designed for long-lasting and quiet braking with superior performance.

Product Features:
  • Engineered to withstand 120 hours of salt spray testing
  • Meets or exceeds OE design for superior stopping power
  • Exceeds ISO manufacturing guidelines (International Organization for Standardization)
  • Matches OE vane size for proper cooling
  • Optimal metallurgy and casting thickness to preventing warping
  • Air gap eliminates brake fade and increases pad life
  • Non-directional finish decreases break-in time
See More

Carquest Wearever – Brake Rotor: Meets or Exceeds OE Specs (Part No.YH145277)

Brake Rotor: Meets or Exceeds OE Specs

from

$36.49
Carquest Premium rotors meet or exceed original equipment specifications while delivering superior stopping power. Carquest Premium rotors are manufactured with proper harmonic design and non-directional finish that eliminate noise and enhance pedal feel. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of your pads and rotors. Carquest Premium rotors are designed for long-lasting and quiet braking with superior performance.

Product Features:
  • Meets or exceeds OE design for superior stopping power
  • Exceeds ISO manufacturing guidelines (International Organization for Standardization)
  • Matches OE vane size for proper cooling
  • Optimal metallurgy and casting thickness to preventing warping
  • Air gap eliminates brake fade and increases pad life
  • Non-directional finish decreases break-in time.
See More

Cardone – Brake Master Cylinder Bleeding Tool (Part No.10-5000MCB)

Brake Master Cylinder Bleeding Tool

from

$15.99
CARDONE Master Cylinder Bench Bleeder Tool cuts typical bleeding procedures in half and is a more effective way to purge the brake system of air than other bleeding procedures. This handy, innovative tool is a must, just as bench bleeding is for removing all the air from your brake system, allowing you to spend less time in the garage, and more time on the road.

Product Features:
  • Each unit is 100% new, providing consistent performance when servicing your brake system
  • Easy to transfer for on-the-spot master cylinder bleeding
  • Fluid measurements clearly displayed on each unit in both ounces and milliliters for convenience
  • Easy to clean to ensure no cross contamination
  • Durability for long lasting performance
See More

ATE – Pneumatic Brake Booster (Part No.N4000291642ATE)

Pneumatic Brake Booster

from

$440.25
ATE supplies brake boosters in single or tandem versions and in all desired sizes and is one of the world’s leading OE suppliers of brake control and brake assist systems. The tie rod version, which is available for all designs, provides further weight reduction and additional optimized elongation characteristics. Front-bolt concepts on a tie-rod basis facilitate installation. Electric and mechanical brake assist systems, sensors for OHB, ACC, ESC, etc., as well as measures designed to optimize crash behavior complete the product portfolio. Brake assist systems are an important aid in emergency braking situations in which a driver needs to respond to an emergency situation, but does not apply the brakes with sufficient pressure. The brake assist recognizes the brake application speed to detect this type of panic situation, and activates the brake booster or the EBS hydraulic unit. Maximum braking is thus achieved although the force on the brake pedal is low – the shorter braking distance can even be life-saving.

Product Features:
  • Original equipment (OE) quality
  • Wide range of single and tandem Brake Boosters
  • Unique tie-rod design meaning lighter and thinner parts for more efficient performance
  • Most units are made of steel, but lightweight aluminium versions are also available.
See More

Carquest Standard – Brake Pads: Reliable and Dependable Stopping (Part No.MKD873)

Brake Pads: Reliable and Dependable Stopping

from

$45.99
Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price.

Product Features:
  • Dependable stopping power
  • Single layer shim for quiet braking
  • OE-designed slots and chamfers to reduce noise and vibration
  • Powder-coated backing plate prevents corrosion
See More

Carquest Wearever – Disc Brake Caliper Guide Pin Boot Kit (Part No.8217A)

Disc Brake Caliper Guide Pin Boot Kit

from

$15.29
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. A complete brake job that includes new hardware goes a long way toward preventing comebacks. Changing out your Rubber Pin Boot or Slider Bushing Kit will ensure the guide pins are clean and free from debris for smoother braking.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Easy and fast replacement
  • Prevents noise and premature wear
  • Provides longer brake life and performance
See More

Carquest Premium – Semi Loaded Disc Brake Caliper (Part No.19-2882)

Semi Loaded Disc Brake Caliper

from

$114.99
Carquest Premium Brake Calipers are manufactured to meet or exceed original equipment manufacturer specifications for performance and durability. Where applicable, Carquest Premium Brake Calipers feature a specially formulated OE style zinc di-chromate anti-corrosion finish that provides superior rust protection in all conditions. Carquest Premium Brake Calipers feature new OE design, stainless steel pistons manufactured for maximum durability, and precision machined for an exacting fit and smooth application of braking force. Carquest Premium Brake Calipers include 100% new OE design dust boots and EPDM rubber seals that provide increased resistance to thermal deterioration and years of-leak free operation. Carquest Premium Brake Calipers include application-specific brackets and abutment hardware where required, for easy installation and confident restoration of stopping power. 100% end-of-line inspection and pressure testing guarantees perfect performance right out of the box.

Product Features:
  • Meets or exceeds original equipment specifications for performance and durability
  • OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
  • Application-specific caliper bodies for easy installation
  • Brackets included where required, for complete system restoration
  • Meets or exceeds original equipment specifications for performance and durability
  • OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
  • Application-specific caliper bodies for easy installation
  • Brackets included where required, for complete system restoration
  • OE style, zinc di-chromate anti-corrosion finishes provide superior resistance to rust on all iron caliper bodies and brackets
  • 100% new, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
  • New bleeder screws, banjo bolts, and crush washers included for a complete repair
  • OE Style, stainless steel pad abutment hardware included
  • 100% end-of-line inspection and pressure testing ensures quality and performance
  • Caliper finish or coating may vary
See More

ATE – Anti Rattle Spring / Clip (Part No.N1069226238ATE)

Anti Rattle Spring / Clip

from

$5.44
Caliper housing spring retaining clips are an essential component of ATE-designed fist floating brake calipers. The fist floating caliper consists of a holder and housing, which is located in rubber damping sleeves. It slides within the holder together with the outer brake pad while as the pad wears. To prevent the housing from lifting off the pad and causing noise issues, the caliper is pulled against the brake pad by the caliper housing spring retaining clip. These clips are exposed to continuous corrosion attack and should therefore also be replaced each time the brake pads are changed.

Product Features:
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Febi – Bilstein Brake Disc Set Screw (Part No.N1004140486FEB)

Bilstein Brake Disc Set Screw

from

$2.98
The Febi/Bilstein Brake Disc Set Screw is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Carquest Wearever – Parking Brake Hardware Kit (Part No.17442)

Parking Brake Hardware Kit

from

$46.99
Brakes are designed as a system and all the parts need to work together for best performance. Parking brakes hold the vehicle in place when the vehicle is parked. Because the parking brake is so important, you want to be sure all it’s hardware and components are in good shape.

Product Features:
  • Contains all the necessary hardware for easy installation
  • Direct replacement for a perfect fit, form and function
  • Corrosion resistant for long-lasting durability against harsh roads
  • Manufactured with quality materials to restrain high tolerances
See More

Carquest Wearever – Disc Brake Hardware Kit (Part No.13404A)

Disc Brake Hardware Kit

from

$18.79
Brakes are designed as a system and all the parts need to work together for best performance. The kits provide advance protection for your brake by assuring brakes perform at an optimum level.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Exact fitment and original replacement
  • Helps deliver a quieter, more efficient braking system
  • Low-friction PTFE coating to reduce drag
  • Manufactured with quality materials to suppress high stress levels
See More

Pex – Disc Brake Pad Electronic Wear Sensor (Part No.WK596)

Disc Brake Pad Electronic Wear Sensor

from

$5.99
As an OE manufacturer, PEX brake wear sensors are designed and produced to have the same form, fit, and function as the original OE part. This means technicians get the right part for the job, the part fits properly, and the brake wear sensor works correctly once installed. This insures that as the brake pad wears down, the sensor makes proper contact with the rotor, which breaks the sensor’s wire loop. Once broken, the car’s warning lamp is illuminated, alerting the driver that the brake pads have worn to a level in which they need to be replaced.

Product Features:
  • PEX sensors are designed and produced to have the same form, fit, and function as the original OE part enabling easy installation and ensuring proper fit.
  • Use of high quality materials specified by auto manufactures ensures durability and resistance to extreme temperatures, as well as excellent electrical performance and provides safety and performance for drivers and passengers.
  • All PEX products undergo stringent and constant quality controls. We inspect virtually every aspect going far beyond the form, fit, and function. Our Quality Control includes heat tests; resistance; as well as pull force testing – just to name a few.
  • Our newly designed packaging is both cost effective and “green” since it is manufactured using fewer natural resources reflecting our dedication to corporate responsibility
  • As the leading manufacturer of electronic brake wear sensors, PEX offers the widest range of sensors in our peer group for both commercial and passenger vehicles.
See More

Carquest Wearever – Brake Pad Wear Sensor (Part No.084-1526)

Brake Pad Wear Sensor

from

$9.49
The Wearever brand offers a complete line of quality products that are appealing alternatives to higher priced brands without sacrificing quality, durability or performance. Wearever Brake Pad Wear Sensors offer an OE safety feature designed to warn the driver when a brake pad is worn or at the end of its life cycle.

Product Features:
  • Triggers a warning light on the dashboard
  • Should be replaced each time the brake pad is replaced
  • Not available for all makes and models, refer to your vehicle’s owner Manual to validate the number of brake pad wear sensors are required, when applicable
See More

Carquest Premium – Semi Loaded Disc Brake Caliper with Bracket (Part No.19-B6028)

Semi Loaded Disc Brake Caliper with Bracket

from

$83.99
Carquest Premium Brake Calipers are manufactured to meet or exceed original equipment manufacturer specifications for performance and durability. Where applicable, Carquest Premium Brake Calipers feature a specially formulated OE style zinc di-chromate anti-corrosion finish that provides superior rust protection in all conditions. Carquest Premium Brake Calipers feature new OE design, stainless steel pistons manufactured for maximum durability, and precision machined for an exacting fit and smooth application of braking force. Carquest Premium Brake Calipers include 100% new OE design dust boots and EPDM rubber seals that provide increased resistance to thermal deterioration and years of-leak free operation. Carquest Premium Brake Calipers include application-specific brackets and abutment hardware where required, for easy installation and confident restoration of stopping power. 100% end-of-line inspection and pressure testing guarantees perfect performance right out of the box.

Product Features:
  • Meets or exceeds original equipment specifications for performance and durability
  • OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
  • Application-specific caliper bodies for easy installation
  • Brackets included where required, for complete system restoration
  • Meets or exceeds original equipment specifications for performance and durability
  • OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
  • Application-specific caliper bodies for easy installation
  • Brackets included where required, for complete system restoration
  • OE style, zinc di-chromate anti-corrosion finishes provide superior resistance to rust on all iron caliper bodies and brackets
  • 100% new, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
  • New bleeder screws, banjo bolts, and crush washers included for a complete repair
  • OE Style, stainless steel pad abutment hardware included
  • 100% end-of-line inspection and pressure testing ensures quality and performance
  • Caliper finish or coating may vary
See More

Carquest Premium – Semi Loaded Disc Brake Caliper (Part No.19-3419)

Semi Loaded Disc Brake Caliper

from

$77.99
Carquest Premium Brake Calipers are manufactured to meet or exceed original equipment manufacturer specifications for performance and durability. Where applicable, Carquest Premium Brake Calipers feature a specially formulated OE style zinc di-chromate anti-corrosion finish that provides superior rust protection in all conditions. Carquest Premium Brake Calipers feature new OE design, stainless steel pistons manufactured for maximum durability, and precision machined for an exacting fit and smooth application of braking force. Carquest Premium Brake Calipers include 100% new OE design dust boots and EPDM rubber seals that provide increased resistance to thermal deterioration and years of-leak free operation. Carquest Premium Brake Calipers include application-specific brackets and abutment hardware where required, for easy installation and confident restoration of stopping power. 100% end-of-line inspection and pressure testing guarantees perfect performance right out of the box.

Product Features:
  • Meets or exceeds original equipment specifications for performance and durability
  • OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
  • Application-specific caliper bodies for easy installation
  • Brackets included where required, for complete system restoration
  • Meets or exceeds original equipment specifications for performance and durability
  • OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
  • Application-specific caliper bodies for easy installation
  • Brackets included where required, for complete system restoration
  • OE style, zinc di-chromate anti-corrosion finishes provide superior resistance to rust on all iron caliper bodies and brackets
  • 100% new, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
  • New bleeder screws, banjo bolts, and crush washers included for a complete repair
  • OE Style, stainless steel pad abutment hardware included
  • 100% end-of-line inspection and pressure testing ensures quality and performance
  • Caliper finish or coating may vary
See More

PowerStop – Front And Rear Carbon-Fiber Ceramic Disc Pad And Rotor: Brake Kit, Z23 Daily Driver (Part No.K5793)

Front And Rear Carbon-Fiber Ceramic Disc Pad And Rotor: Brake Kit, Z23 Daily Driver

from

$561.99
PowerStop is on a mission to deliver an easy way for any driver to upgrade their brakes – no matter where or how they use their vehicle. Forget standard, off-the-shelf parts. Our Z23 Evolution Sport Brake Upgrade Kit comes with everything you need, from pads, rotors and premium stainless-steel hardware for an easy, bolt-on upgrade for your daily-driver. Along with increased braking power, the Carbon-Fiber Ceramic brake pads feature a low-dust formula to keep those wheels looking great while you say goodbye to nasty brake dust. These pads combine with Drilled & Slotted rotors to ensure a cool, smooth ride that protects against rust and corrosion. Give your daily-driver the easy and affordable performance upgrade it deserves with the Z23 Evolution Sport Brake Upgrade Kit.

Product Features:
  • This complete upgrade kit is engineered to improve the braking performance of the vehicle you use everyday
  • PowerStop engineered Carbon-Fiber Ceramic Z23 compound significantly enhances braking performance versus traditional ceramic brake pads
  • Low-dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE
  • Multi-Layer rubberized shims provide virtually noise-free braking
  • Drilled & Slotted performance rotors provide maximum cooling
  • Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
  • Bolt-on upgrade for stock brakes, no modifications necessary
  • Brake rotor, pad & hardware engineered to work together to increase stopping power, improve durability & eliminate dust
  • Rotors are zinc plated for maximum protection against rust.
  • Includes 1 Front & 1 Rear Sensor Wire
  • Buy with confidence from the originator & industry leader of brake kits
See More

PowerStop – Front Carbon-Fiber Ceramic Disc Pad And Rotor: Brake Kit, Z23 Daily Driver (Part No.K5792)

Front Carbon-Fiber Ceramic Disc Pad And Rotor: Brake Kit, Z23 Daily Driver

from

$277.99
PowerStop is on a mission to deliver an easy way for any driver to upgrade their brakes – no matter where or how they use their vehicle. Forget standard, off-the-shelf parts. Our Z23 Evolution Sport Brake Upgrade Kit comes with everything you need, from pads, rotors and premium stainless-steel hardware for an easy, bolt-on upgrade for your daily-driver. Along with increased braking power, the Carbon-Fiber Ceramic brake pads feature a low-dust formula to keep those wheels looking great while you say goodbye to nasty brake dust. These pads combine with Drilled & Slotted rotors to ensure a cool, smooth ride that protects against rust and corrosion. Give your daily-driver the easy and affordable performance upgrade it deserves with the Z23 Evolution Sport Brake Upgrade Kit.

Product Features:
  • This complete upgrade kit is engineered to improve the braking performance of the vehicle you use everyday
  • PowerStop engineered Carbon-Fiber Ceramic Z23 compound significantly enhances braking performance versus traditional ceramic brake pads
  • Low-dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE
  • Multi-Layer rubberized shims provide virtually noise-free braking
  • Drilled & Slotted performance rotors provide maximum cooling
  • Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
  • Bolt-on upgrade for stock brakes, no modifications necessary
  • Brake rotor, pad & hardware engineered to work together to increase stopping power, improve durability & eliminate dust
  • Rotors are zinc plated for maximum protection against rust.
  • Includes 1 Front Sensor Wire
  • Buy with confidence from the originator & industry leader of brake kits
See More

Euro Stop – Euro-Stop High-Carbon Coated Rotors, ECE-R90 Brake Pads + Hardware Kit (Part No.ESK7760)

Euro-Stop High-Carbon Coated Rotors, ECE-R90 Brake Pads + Hardware Kit

from

$526.99
Product Features:
  • EuroStop pads have been engineered to meet the strict European ECE-R90 standards – certified OE compatible fitment and performance
  • Rotors coated for optimum anti-corrosion protection
  • High-carbon rotor metallurgy provides improved thermal conductivity to resist distortion and cracking; improved damping coefficient to reduce squeal
  • Rotors manufactured to strict tolerances for DTV and runout for smooth quiet performance
  • Pads manufactured in Europe for European applications
  • ECE-R90 brake pads produce an equivalent amount of brake dust to the OE product. PowerStop also offers lower-dust pad and kit products.
  • Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
  • Includes 1 Front & 1 Rear Sensor Wire
  • Buy with confidence from the originator & industry leader of brake kits
See More

2009 Mercedes-Benz C350 Brake Parts

You count on your 2009 Mercedes-Benz C350 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Brake Parts. With 57 Brake Parts ranging in price from $1.21 to $705.99, you’re sure to find everything you need for your 2009 Mercedes-Benz C350.

Brands matter. If you want to shop a specific Brake Parts brand, we stock 16 different brands like Carquest, Cardone, and Carquest Professional. 2009 Mercedes-Benz C350 Brake Parts start as low as $1.21!

One of the best ways to find top quality OEM or aftermarket Brake Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 223 extensive product reviews on 2009 Mercedes-Benz C350 Brake Parts. Some of the top-rated Brake Parts products we carry are Painted Brake Rotor Meets or Exceeds OE Specs, Features RotorShield with 4.1 stars and Semi-Metallic Brake Pads – (4-Pad Set) with 5.0 stars.

Did we mention you can order your Brake Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Brake Parts inventory for your 2009 Mercedes-Benz C350 below to get started!

Top-Rated Brake Parts Brands For Your 2009 Mercedes-Benz C350

Trusted Brake Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2009 Mercedes-Benz C350 running right for years to come. In our inventory you’ll find brands like Carquest, Cardone, Carquest Professional, and even more.

Popular Carquest Professional Platinum Brake Parts

You’ll find popular Carquest Professional Platinum brand products across Brake Pads and Shoes. All are waiting to get your 2009 Mercedes-Benz C350 back on the road. Some of the top-rated Carquest Professional Platinum products in these categories are:
Ceramic Brake Pads - (4-Pad Set)
from $36.99
(10)
Ceramic Brake Pads – (4-Pad Set)
Front Brake Pads and Shoes
Brake Pads With Hardware, Semi-Metallic, Longer Life, Quiet
from $81.99
(8)
Brake Pads With Hardware, Semi-Metallic, Longer Life, Quiet
Rear Brake Pads and Shoes

Top-Rated Carquest Wearever Brake Parts


If Carquest Wearever are what you’re looking for, our inventory holds plenty. We stock Carquest Wearever brand Brake Parts for your 2009 Mercedes-Benz C350, and some of our most reviewed Carquest Wearever parts include:
Disc Brake Caliper Guide Pin Kit
from $6.49
(53)
Disc Brake Caliper Guide Pin Kit
Brake Caliper Bolt and Pins
Brake Pad Wear Sensor
from $9.49
(48)
Brake Pad Wear Sensor
Brake Wear Sensors
Disc Brake Caliper Guide Pin Kit
from $7.49
(35)
Disc Brake Caliper Guide Pin Kit
Brake Caliper Bolt and Pins

FAQs for 2009 Mercedes-Benz C350 Brake Parts

What are the most purchased Brake Parts for the 2009 Mercedes-Benz C350?

Out of 57 Brake Parts for the 2009 Mercedes-Benz C350, the most popular in our inventory are:
Disc Brake Caliper Guide Pin Boot Kit
from $6.49
(22)
Disc Brake Caliper Guide Pin Boot Kit
Brake Caliper Guide Pin Boot Kits
Brake Master Cylinder Bleeding Tool
from $15.99
(10)
Brake Master Cylinder Bleeding Tool
Brake Master Cylinder Bleeders
Brake Pad Set - Gold Semi-Metallic
from $69.99
(11)
Brake Pad Set – Gold Semi-Metallic
Rear Brake Pads and Shoes

What are the top-rated 2009 Mercedes-Benz C350 Brake Parts?

Top-rated Brake Parts for your 2009 Mercedes-Benz C350 based on customer reviews/ratings are:
Painted Brake Rotor Meets or Exceeds OE Specs, Features RotorShield
from $83.99
(13)
Painted Brake Rotor Meets or Exceeds OE Specs, Features RotorShield
“Even better quality than I expected”
Semi-Metallic Brake Pads - (4-Pad Set)
from $69.99
(6)
Semi-Metallic Brake Pads – (4-Pad Set)
“Brakes just fine.”
Disc Brake Caliper Guide Pin Boot Kit
from $15.29
(2)
Disc Brake Caliper Guide Pin Boot Kit
“These are overpriced but they are good quality epdm material. They fit tightly as they should. Interestingly most remanned calipers for the 2014 Focus”