Name: Air Intake Kit, Polished Aluminum, Jeep Wrangler (Tj) 2.4L 03-06. Will Not Work
Brand: Rugged Ridge
SKU: 17750.03
Price: 429.99 USD

from

$429.99

Own a Jeep? The toughest four letter word on wheels. Are you looking for a parts source rugged enough to match your off the beaten path sense of adventure? With more than 11,000 unique part numbers from brands like Omix-ADA, Rugged Ridge, Alloy USA, Outland Automotive, ORV Suspension and Precision Gear, consider this your trail guide to the 4×4 of your dreams. A go anywhere, anytime, in any weather vehicle. Go ahead and smile, because it’s going to take a lot of courage not to be cocky when you Own a Jeep like that? Omix-ADA is more than just a parts manufacturer, they’re a community of enthusiasts dedicated to producing the finest in off-road solutions. Our products have been propelling four-wheel drive vehicles down highways, back roads and over the world’s roughest terrain for about two decades. Omix’s team of engineers have developed, tested and trail ridden many of our 11,000+ products until they were perfected for you. Omix-Ada is proud to have one of the most capable Research and Development, Engineering, and Product Design teams in the automotive aftermarket. By utilizing the latest in 3D Computer Aided Design and Finite Element Analysis, and coupling these tools with our decades of market experience, we are able to develop products that give our customers the highest value parts possible.

from

$99.99

Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:

IMPROVED FLOW CAPACITY : Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
DESIGNED TO PERFORM : Fixture checked to ensure a precise fit for quick and easy installation
AVAILABLE IN DIFFERENT SIZES : Offered in a variety of styles and sizes for a quality vehicle repair
PREMIUM MATERIALS: Made from stainless steel for durability and long life
BETTER TOGETHER : Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade

from

$328.99

The REACT offers fully customizable control over your vehicle’s throttle response. The simple control knob allows you to switch between multiple modes and control the throttle intensity of each mode on-the-fly. The REACT installs easily and is completely plug-and-play, has an automatic setup sequence so no disassembly is required, comes with a magnetic A/C vent mount (Pedestal swivel mount also available – Sold separately at hypertech.com/REACT.aspx), and doesn’t void your factory warranty. Plus the REACT is internet updateable. Three (3) versions of the REACT throttle optimizer are available to fit your particular driving needs… Performance, Off-Road, and Tow.

Product Features:

On-The-Fly Adjustments
LED Setting Indicators
Multiple Levels Of Safety Protection
Magnetic A/C Vent Mount Incl. [No Screw Or Tape]
Pedestal Swivel Mount Available [Sold Separately]
Custom Tuning Software
Internet Updateable
Easy Plug-N-Play Install
Automatic Setup Sequence [No Disassembly Required]
Doesnt Void Factory Warranty

from

$262.99

Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.

Product Features:

Replace to Restore Ride Height
Gain Durability
Stronger Than Original Rubber Mounts

from

$193.99

Dynomax Super Turbo performance mufflers’ exclusive, patented, flow director design channels exhaust flow, and eliminates turbulence on most applications. The large internal flow tubes improve exhaust flow, and reduce backpressure. Each muffler uses fiberglass matting technology to absorb unwanted interior resonance, while maintaining a mellow performance tone.

Product Features:

Large internal flow tubes improve exhaust flow and reduce backpressure
Dyno proven to flow up to 700 SCFM
Exclusive patented flow director channels exhaust flow and eliminates turbulence on most applications.
Fiberglass matting technology absorbs unwanted interior resonance but maintains a mellow tone
1.75-inch to 3-inch inlet / outlet configurations

from

$68.99

K&N performance High-Flow Air Filters are engineered to improve engine performance. Unlike disposable paper filters which must be frequently replaced, K&N Air Filters are washable, reusable, and engineered to last for the life of your vehicle. K&N air filters are backed by our famous 10-Year/Million Mile Limited Warranty, and they provide an environmentally friendly way to reduce landfill waste by avoiding disposable filters. Engineered to fit easily into your factory air box, installation can be completed in a matter of minutes! K&N develops and tests each product on the world┐s toughest race tracks, so we can bring the highest level of performance to your daily driving. Join the millions of customers who have saved money and improved vehicle performance by upgrading to K&N filtration.

Product Features:

ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (based on the average miles driven per year of 15,000 miles)
ULTIMATE LONGEVITY: No-hassle lifetime warranty on stock replacement K&N air filters- limitations apply
EASY INSTALLATION: K&N Air Filters are pre-treated and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
ECO-FRIENDLY: Using a washable, reusable engine air filter helps reduce replacement air filter waste- a K&N air filter is designed to last longer than 10 or more disposable filters
MADE IN USA: K&N Air Filters are proudly made in the USA for trusted quality & reliability

from

$72.99

Having problems with your clutch? Does it slip or chatter when you let the pedal out? The clutch disc, pressure plate, or throw-out bearing are probably worn out. It’s always a good idea to replace all three at the same time.

Product Features:

Many Different Jeep Applications
OE Style
Direct Fit

from

$79.99

Enhance the appearance of your Jeep with these premium CNC machined billet aluminum accessories from Rugged Ridge. Available in a lightly brushed or black anodized finish. These high quality accessories replace your factory components with no drilling or

Product Features:

Black Aluminum
CNC Machined
Easy to Install
Limited 5 Year Warranty

from

$8.29

Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.

Product Features:

OE Style
Direct Fit
Steel
Better Flow Control

from

$20.29

Are you smelling exhaust in your Jeep? Can you hear an exhaust leak? If so, it’s time to replace the exhaust manifold gasket. Omix-ADA offers high quality exhaust manifold gaskets to solve the problem.

Product Features:

Composite
Pair
Heat Resistant
Direct Fit

from

$6.79

Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.

Product Features:

OE Style
Direct Fit

from

$245.99

starter issues can leave you stranded, but this Omix-ADA replacement ensures your engine fires up reliably every time. Designed as a direct OE-style fit, this 12-volt starter is built to match the original specifications of your vehicle, making installation seamless and hassle-free. Whether your current starter spins quickly without engaging the engine or produces a rapid clicking noise, this high-quality replacement is engineered to restore optimal performance. Crafted for durability and precision, it delivers consistent power to get your motor running smoothly, even in demanding conditions. With its dependable design and direct fit compatibility, this starter offers exceptional value, saving you time and money while keeping your vehicle ready for the road.

Product Features:

12 Volt
OE Style
Direct Fit
Engineered for durability and precision to ensure consistent performance in demanding conditions.
Restores optimal engine starting functionality, addressing issues like rapid clicking or non-engagement.

from

$59.99

Own a Jeep? The toughest four letter word on wheels. Are you looking for a parts source rugged enough to match your off the beaten path sense of adventure? With more than 11,000 unique part numbers from brands like Omix-ADA, Rugged Ridge, Alloy USA, Outland Automotive, ORV Suspension and Precision Gear, consider this your trail guide to the 4×4 of your dreams. A go anywhere, anytime, in any weather vehicle. Go ahead and smile, because it’s going to take a lot of courage not to be cocky when you Own a Jeep like that? Omix-ADA is more than just a parts manufacturer, they’re a community of enthusiasts dedicated to producing the finest in off-road solutions. Our products have been propelling four-wheel drive vehicles down highways, back roads and over the world’s roughest terrain for about two decades. Omix’s team of engineers have developed, tested and trail ridden many of our 11,000+ products until they were perfected for you. Omix-Ada is proud to have one of the most capable Research and Development, Engineering, and Product Design teams in the automotive aftermarket. By utilizing the latest in 3D Computer Aided Design and Finite Element Analysis, and coupling these tools with our decades of market experience, we are able to develop products that give our customers the highest value parts possible.

from

$126.99

Enhance the appearance of your Jeep with these premium CNC machined billet aluminum accessories from Rugged Ridge. Available in a lightly brushed or black anodized finish. These high quality accessories replace your factory components with no drilling.

Product Features:

Brushed Silver
CNC Machined
No Drilling or Modification

from

$87.99

Are your disc brake pads worn out? Do they squeal? It’s always a good idea to replace the pads and rotors on both sides at the same time. That will give you the best braking and save labor in the future.

Product Features:

With Dana 30 Only
OE Style
Direct Fit

from

$164.99

The Evaporator Skid Plate is constructed of durable 3/16 Inch thick black powder coated steel, and mounts to existing body holes using the factory hardware. It helps transfer the load of an impact away from the evaporator tank and to the frame.

Product Features:

Black Powdercoated
3/16 in. Steel
Easy to Install

from

$114.99

Protect your factory differential cover with these heavy duty skid plates. Designed to fit the contours of your stock differential cover and made of durable 3/16-inch black powdercoated steel, these skid plates will help you slide over obstacles.

Product Features:

Black Powder Coated
3/16 in. Steel
Use w/ Factory Diff Cover
Mounting Hardware Included

from

$223.99

Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.

Product Features:

External Coil
OE Style
Direct Fit

from

$78.99

Engineered with optimized low resistance, high turns ratio windings around an M36 high silicone magnetic steel E-core for higher energy and voltage outputs. Results in quicker starts, improved idle quality, crisper throttle response and more high RPM power. Compatible with late model Ford EEC-IV computer controlled ignition system equipped with a TFI distributor. Direct OEM replacement. Can also be used with an ACCEL, Mallory, Crane, Holley or MSD capacitive discharge ignition system. Special high temperature epoxy resists shock and vibration, while increasing thermal conductivity. Brass coil wire contact increases energy efficiency and resists corrosion better than aluminum. High dielectric strength ACCEL Yellow over-molded housing.

Product Features:

10-15% More Energy
Direct Plug In Replacement Direct OE Fit
Advanced Bobbin Technology
Standard Motor Products SMP Uf-198
MSD 8228
Improved Idle Quality
Resists Shock And Vibration
Resists Corrosion

from

$641.99

Own a Jeep? The toughest four letter word on wheels. Are you looking for a parts source rugged enough to match your off the beaten path sense of adventure? With more than 11,000 unique part numbers from brands like Omix-ADA, Rugged Ridge, Alloy USA, Outland Automotive, ORV Suspension and Precision Gear, consider this your trail guide to the 4×4 of your dreams. A go anywhere, anytime, in any weather vehicle. Go ahead and smile, because it’s going to take a lot of courage not to be cocky when you Own a Jeep like that? Omix-ADA is more than just a parts manufacturer, they’re a community of enthusiasts dedicated to producing the finest in off-road solutions. Our products have been propelling four-wheel drive vehicles down highways, back roads and over the world’s roughest terrain for about two decades. Omix’s team of engineers have developed, tested and trail ridden many of our 11,000+ products until they were perfected for you. Omix-Ada is proud to have one of the most capable Research and Development, Engineering, and Product Design teams in the automotive aftermarket. By utilizing the latest in 3D Computer Aided Design and Finite Element Analysis, and coupling these tools with our decades of market experience, we are able to develop products that give our customers the highest value parts possible.

from

$567.99

Own a Jeep? The toughest four letter word on wheels. Are you looking for a parts source rugged enough to match your off the beaten path sense of adventure? With more than 11,000 unique part numbers from brands like Omix-ADA, Rugged Ridge, Alloy USA, Outland Automotive, ORV Suspension and Precision Gear, consider this your trail guide to the 4×4 of your dreams. A go anywhere, anytime, in any weather vehicle. Go ahead and smile, because it’s going to take a lot of courage not to be cocky when you Own a Jeep like that? Omix-ADA is more than just a parts manufacturer, they’re a community of enthusiasts dedicated to producing the finest in off-road solutions. Our products have been propelling four-wheel drive vehicles down highways, back roads and over the world’s roughest terrain for about two decades. Omix’s team of engineers have developed, tested and trail ridden many of our 11,000+ products until they were perfected for you. Omix-Ada is proud to have one of the most capable Research and Development, Engineering, and Product Design teams in the automotive aftermarket. By utilizing the latest in 3D Computer Aided Design and Finite Element Analysis, and coupling these tools with our decades of market experience, we are able to develop products that give our customers the highest value parts possible.

Product Features:

2000-2006 Wrangler, 2000-2001 Cherokee, 1999-2001 Grand Cherokee, Exhaust Header (4.0L), 409 Stainless Steel

from

$524.99

K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.

Product Features:

GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
IMPROVED ENGINE SOUND: Hear the power under the hood.
WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
HIGH QUALITY: Made in America.

from

$419.99

K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.

Product Features:

GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
IMPROVED ENGINE SOUND: Hear the power under the hood.
WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
HIGH QUALITY: Made in America.

from

$38.99

Does your Jeep wander down the road or shift suddenly on turns? The rubber bushings in your sway bar end links may be worn out or missing. Omix-ADA offers replacement sway bar end links to keep your Jeep under control.

Product Features:

Steel
With Bushing And Insert
OE Style
Direct Fit
Limited 5 Year Warranty

from

$37.99

SwyBarBshKt

from

$17.99

K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.

Product Features:

HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
EASY TO REMOVE: Fast and easy Wrench-Off removal
HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers

from

$17.99

K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N’s Limited Warranty.

Product Features:

Product Features:

Designed to allow high flow rates and a consistent flow of oil to your engine
Pleated synthetic-blend filtration media removes most harmful contaminants
Fast and easy Wrench-Off removal using the welded one-inch hex nut
High capacity to withstand the service intervals recommended by vehicle manufacturers
Heavy-duty canister for outstanding durability
Laboratory tested to ensure excellent capacity, efficiency, and mechanical strength
Designed to operate with all synthetic, conventional, and blended motor oils
Limited Warranty

from

$10.79

Routine maintenance is important for your Jeep. Omix-ADA offers high quality replacement oil filters to keep your Jeep running well for years to come. Be nice to your Jeep and it will be nice to you.

Product Features:

OE Style
Direct Fit

2009 Jeep Wrangler Performance and Racing Products

Rugged Ridge – Air Intake Kit, Polished Aluminum, Jeep Wrangler (Tj) 2.4L 03-06. Will Not Work (Part No.17750.03)

Dynomax – Exhaust Pipe (Part No.55387)

Hypertech – REACT Off-Road Throttle Optimizer: Better power delivery for off-road driving on various terrains (Part No.105202)

Energy Suspension – Body Mount Set (Part No.2.4108G)

Dynomax – Super Turbo Muffler: Direct Fit, Stainless Steel, 18" L, 2.5" In, 2.5" Out, Oval (Part No.53804)

K&N – Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration (Part No.33-2364)

Omix – Clutch Throwout Bearing (Part No.16906.06)

Rugged Ridge – Billet Oil Cap (Part No.11431.04)

Omix – Thermostat 180 Degree; 41-71 Willys/Jeep Models (Part No.17106.02)

Omix – Exhaust Manifold Gaskets; 3.8L; 07-11 Jeep Wrangler JK (Part No.17451.16)

Omix – Differential Cover Bolt; 72-10 Jeep CJ/Wrangler YJ/TJ/JK (Part No.16522.02)

Omix – Starter (Part No.17227.06)

Rugged Ridge – Billet Shift Knob Without Shift Pattern, Most 85-85 Cj/ Wrangler And Some 97-98 (Part No.11420.21)

Rugged Ridge – Transmission Shifter Trim; Brushed Billet Aluminum; Manual; 07-10 JK (Part No.11421.12)

Omix – Brake Rotor (Part No.16702.12)

Rugged Ridge – Skid Plate (Part No.18003.40)

Rugged Ridge – Heavy Duty Differential Skid Plate (Part No.16597.35)

Omix – Ignition Coil; 3.8L; 07-11 Jeep Wrangler (Part No.17247.15)

Accel – High-Performance Ignition Coil – Direct OE Fit (Part No.140021)

Rugged Ridge – Exhaust Header, Stainless Steel, Jeep Wrangler (Jk) 3.8L 07-10 (Part No.17650.53)

Rugged Ridge – Header Assembly, 91-98 4.0L Wrangler/Cherokee Includes Manifold Gaskets, 409 Stainless (Part No.17650.02)

K&N – Cold Air Intake: Adds Up To 7 Horsepower, With Million Mile Air Filter (Part No.71-1566)

K&N – Cold Air Intake: Adds Up To 8 Horsepower, With Million Mile Air Filter (Part No.77-1553KP)

Omix – Sway Bar Link (Part No.18724.06)

Energy Suspension – SwyBarBshKt (Part No.2.5112G)

K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2004)

K&N – Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine (Part No.HP-1017)

Omix – Oil Filter; SAE Thread; 91-08 Jeep Wrangler (Part No.17436.08)

K&N – Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration (Part No.33-2364)

K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-1002)

Rugged Ridge – Billet Oil Cap (Part No.11431.04)

Rugged Ridge – Engine Oil Cap (Part No.11430.04)

Omix – Ignition Coil; 3.8L; 07-11 Jeep Wrangler (Part No.17247.15)

Dynomax – Super Turbo Muffler: Direct Fit, Stainless Steel, 18" L, 2.5" In, 2.5" Out, Oval (Part No.53804)

Rugged Ridge – Exhaust Header, Stainless Steel, Jeep Wrangler (Jk) 3.8L 07-10 (Part No.17650.53)

Dynomax – Exhaust Pipe (Part No.55387)

Omix – Thermostat (Part No.17106.06)

Omix – Exhaust Manifold Gaskets; 3.8L; 07-11 Jeep Wrangler JK (Part No.17451.16)