2009 Hummer H3 Transmission Parts

Below you will find various in-demand Hummer Transmission Parts, components and accessories for your 2009 H3. Advance Auto Parts has popular H3 parts like Automatic Transmission Parts, Transmission Mounts, Automatic Transmission Pan and Gaskets and more. You’ll also find aftermarket and OEM Transmission Parts for other H3 model years including 2006, 2007, 2008, 2010 and more. Select a category of 2009 Hummer H3 Transmission Parts below and start saving instantly.

Popular 2009 Hummer H3 Transmission Parts Categories

Gear Shift Levers

Transmission Torque Converters

Automatic Trans Shifter Cable Levers

Torque Converter Hardware

Transmission Solenoids

Transmission Control Modules

Transmission Oil Cooler Lines

Automatic Transmission Torque Converter Clutch Solenoids

Automatic Transmission Shift Solenoids

Back Up Lamp Switches

Transmission Pan Gaskets

Shift Interlock Solenoids

Automatic Transmission Line Connectors

Pinion Bearings

Transmission Mounts

Back Up and Neutral Safety Switches

Transmission Oil Pan Gaskets

Automatic Transmission Wiring Harness

Speed Sensors

Automatic Transmission Differential Bearings

Transmission Speed Sensors

Transmission Bushings

Automatic Transmission Control Modules

Automatic Transmission Output Shaft Seals

Automatic Transmission Oil Pump Seals

Pinion Seals

Miscellaneous Shift Shaft Seals

Automatic Transmission Dipstick Seals

Transmission Seals and O-rings

Back Up Light Relays

Back Up Light Switch Connectors

Torque Converter Seals

Automatic Transmission Torque Converter Clutch Valve Solenoid Connectors

Miscellaneous Automatic Transmission Seals

Input Shaft Bearings

Back Up Lamp Connectors

Transmission Bands

Automatic Transmission Flexplate Mounting Bolts

Shift Shaft Seals

Automatic Transmission Oil Pump Gaskets

Neutral Safety Relays

Manual Transmission Extension Housing Seals

Manual Transmission Shift Fork Inserts

Remanufactured Automatic Transmissions

Torque Converter Bearings

Essential Transmission Parts for 2009 Hummer H3s

from

$28.99

You can forget about the problem of shearing a torque converter bolt after you install these super strong 200,000 PSI gems. They are designed for each specific application and provide the optimum grip. Kits come with hardened parallel ground washers.

Product Features:

Super Strong, Rated At 200,000 PSI
Kits Come With Hardened Parallel Ground Washers
Made In USA
0.590″ Underhead Length
M10 X 1.5 Thread Size
Set of 6

from

$16.99

Permatex’s The Right Stuff 90 Minute Series offers the fastest return to service in a in just 90 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 90 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:

Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
Sensor-safe, non-corrosive, RTV silicone
Protects against leaks caused by vibration and thermal expansion
Meets performance specs of OE silicone gaskets
Quickly returns vehicle to service in just 90 minutes

from

$226.37

An ACDelco GM Original Equipment Transmission Control Module is a GM-recommended replacement for your vehicle’s original component. It controls shifting in your vehicle if it has an automatic transmission. This original equipment transmission control module has been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

This part requires programming and/or special setup procedures. GM Service Information or equivalent describes the procedures and special tools needed to ensure proper operation in the vehicle
Dictates the operation of your vehicle’s vital systems, which is critical to the performance of your vehicle
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$10.79

GM Genuine Parts Multi-Purpose Relays are designed, engineered, and tested to rigorous standards, and are backed by General Motors. It controls a variety of different systems within your vehicle. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Work with vehicle electronics to help optimize vehicle capabilities
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$205.86

Shift Interlock Sole

from

$27.49

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$14.79

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -20°F to 300°F / -29°C to 49°C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$48.99

AT/HARNESS VSS REPR

from

$187.99

Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.

Product Features:

High grade materials that are equal to or better than OE provide durability and long service life
All ABS sensors are tested for proper fit, form, and function
Wire diameter and sheathing same or larger than OE to ensure product quality
Glass filled reinforced plastic for superior resistance to automotive fluids, dirt, salt and road debris
Includes all necessary brackets and hardware

from

$54.96

AT Kickdown Solenoid

from

$33.99

AUTO TRANS BAND

from

$16.29

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$14.29

This automatic transmission shifter cable lever is designed to match the fit and function of the original lever on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this automatic transmission shifter cable lever is designed to match the fit and function of the original lever.
Restores functionality – reliable replacement for an original part that has failed due to corrosion
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$34.99

Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

NTK ABS Wheel Speed Sensor connectors, mounts and wire lengths are an exact match to OE for worry free installation. Grease, mounting nut and instruction sheet included where applicable.
NTK’s Wheel Speed Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function. Manufactured with weather pack connectors to prevent dirt and moisture contamination.
The ABS ECU monitors the Wheel Speed Sensors rotational speed for anti-lock brake function, stability control and traction control. The ABS sensors report the speed of all four wheels to the ECU to determine if the wheels are locking up.

from

$81.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
Our parts are 100% tested to verify both mechanical and electrical switching performance
Decades of industry leading research and development focused on meeting the technician’s needs
Robust design and high grade materials meet the stringent demands of today’s service professional
BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$19.99

AT OIL PUMP SEAL

from

$6.49

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$27.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$174.99

GM Genuine Parts Transmission Control Modules are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These modules help control shifting in vehicles with automatic transmissions. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
Dictates the operation of your vehicle’s vital systems, which is critical to the performance of your vehicle
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$39.99

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$11.99

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$3.49

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$146.10

Neutral Safety Switc

from

$23.26

Pinion Seal

from

$10.67

AT Cooling Hose Fitt

from

$2.62

Oil Dipstick Seal

from

$10.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$11.49

Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:

High torque and rigidity
Sensor-safe, non-corrosive formula
OEM specified
Low-odor, non-corrosive formula
Ideal for closed spaced bolt patterns

Upgrade your 2009 Hummer H3 with Top-Quality Transmission Parts

When it comes to maintaining or upgrading your 2009 Hummer H3, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Hummer or enhancing its overall performance, Transmission Parts are key to keeping your H3 functioning at its best. At Advance Auto Parts, we offer a wide selection of 100 Transmission Parts for the 2009 Hummer H3, designed to meet your needs without breaking the bank. From Automatic Transmission Part replacements to Transmission Mounts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Transmission Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Transmission Parts for your 2009 Hummer H3 at great prices. Our Transmission Parts inventory for this model ranges from just $2.49 to $2,411.00, with an average price of $195.45. Our 100 Transmission Parts in stock come from 26 trusted brands, so you’re sure to find the right part for your 2009 Hummer H3 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2009 Hummer H3, we stock popular OEM and aftermarket Transmission Parts from top names like Permatex, National, Dorman, and more. Permatex Transmission Parts start at just $6.99 and boast an impressive 5 stars average rating from customers. National and Dorman also bring quality to the table, with Transmission Parts available starting at $6.49, and at an average 4 stars rating. With 978 customer reviews and counting, our 2009 Hummer H3 Transmission Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Transmission Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2009 Hummer H3 is always ready to roll. We’re committed to providing you with everything you need to keep your H3 in top shape, all in one place. Start shopping confidently below for your 2009 Hummer H3!

Best-Selling Automatic Transmission Parts for 2009 Hummer H3s

Enhance the driving experience in your Hummer with 28 quality Automatic Transmission Part components, starting at $12.29.

show more show less

from

$14.29

Direct replacement – this automatic transmission shifter cable lever is designed to match the fit and function of the original lever.
Restores functionality – reliable replacement for an original part that has failed due to corrosion
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$52.99

Shift Solenoid

from

$34.99

Pro-King is the leading supplier of transmission and driveline products in the aftermarket. All products are designed to meet or exceed OE quality, form, fit and funtion.

Product Features:

OE Replacement

from

$12.29

This clutch pedal bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this clutch pedal bushing matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$174.99

This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
Dictates the operation of your vehicle’s vital systems, which is critical to the performance of your vehicle
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$66.99

AT CONTR SOLENOID

from

$76.99

This shift interlock solenoid is designed to match the fit and function of the original solenoid on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this shift interlock solenoid is designed to match the fit and function of the original solenoid on specified vehicles.
Ideal solution – this solenoid is a reliable replacement for an original part that is damaged or has failed due to fatigue, excessive heat or electrical current.
Durable construction – this solenoid is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$33.99

AUTO TRANS BAND

from

$61.99

ATP Automatic Transmission Control Solenoid (Lock-Up)

from

$149.99

This remanufactured transmission control module has been thoroughly tested to offer the same function and performance as the stock component – electronically controlling the vehicle’s automatic shifting – for far less than replacement at the dealer.

Product Features:

Remanufactured Transmission Control Module.
Remanufactured Transmission Control Module.
This remanufactured transmission control module has been thoroughly tested to offer the same function and performance as the stock component – electronically controlling the vehicle’s automatic shifting – for far less than replacement at the dealer.
Ideal replacement – this remanufactured transmission control module provides the same function and performance of the stock TCM
Cost-effective fix – module is equally compatible as original but far less expensive than replacement from dealership

from

$82.39

ACDelco is a global leader in automotive replacement parts and related services and offers quality aftermarket products for most makes and models, including General Motors, Ford, Chrysler, Toyota and Honda. ACDelco has over 100 years of experience in the automotive industry and is a brand of GM Customer Care and After sales, a division of General Motors.

from

$54.96

AT Kickdown Solenoid

from

$226.37

This part requires programming and/or special setup procedures. GM Service Information or equivalent describes the procedures and special tools needed to ensure proper operation in the vehicle
Dictates the operation of your vehicle’s vital systems, which is critical to the performance of your vehicle
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$119.99

ATHARNESS VSS REPR

from

$2411.00

Our Remanufactured Transmissions include torque convertors, trans is completely disassembled & checked then reassembled to spec for tolerances, vacuum, seal & balance, all wear parts replaced & sim tested.

Product Features:

Our Remanufactured Transmissions include torque convertors, trans is completely disassembled & checked then reassembled to spec for tolerances, vacuum, seal & balance, all wear parts replaced & sim tested.
If we have important installation information it will be included on tags or in the paperwork packaged with your transmission.
Transmissions are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
All of our transmissions are Dyno tested to ensure the highest standard of trouble free service and longevity.

from

$2298.00

Our Remanufactured Transmissions include torque convertors, trans is completely disassembled & checked then reassembled to spec for tolerances, vacuum, seal & balance, all wear parts replaced & sim tested.
If we have important installation information it will be included on tags or in the paperwork packaged with your transmission.
Transmissions are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
All of our transmissions are Dyno tested to ensure the highest standard of trouble free service and longevity.

from

$2135.99

(PDT)Premium Drivetrain Transmissions are remanufactured to original equipment (OEM) demanding specifications by an OEM builder. Each transmission assembly is manufactured with the highest technology equipment, the most intelligent engineering support, and the best practices available in remanufacturing today.

Product Features:

All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required.
100% of friction components are replaced with upgraded heavy duty parts.
Drum assemblies are air checked and side play is checked to assure proper clearance. 100% of seals, o’rings and gaskets are replaced.
100% of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear. Valve body valves and valve bores are inspected and valve bores are machined as required. Completed valve bodies are tested for proper operation prior to dyno testing.
Transmissions are assembled, end plays are set and fasteners are torqued to the required specification.
Torque Converter: 100% of converters are dynamic balanced. 100% of pumps are furnaced brazed. 100% new bearings and o’rings. 100% new springs and rollers in stator. 100% new thrust washers. 100% new friction liners in overdrive lockup converters.
100% of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno

from

$2135.99

All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required.
100% of friction components are replaced with upgraded heavy duty parts.
Drum assemblies are air checked and side play is checked to assure proper clearance. 100% of seals, o’rings and gaskets are replaced.
100% of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear. Valve body valves and valve bores are inspected and valve bores are machined as required. Completed valve bodies are tested for proper operation prior to dyno testing.
Transmissions are assembled, end plays are set and fasteners are torqued to the required specification.
Torque Converter: 100% of converters are dynamic balanced. 100% of pumps are furnaced brazed. 100% new bearings and o’rings. 100% new springs and rollers in stator. 100% new thrust washers. 100% new friction liners in overdrive lockup converters.
100% of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno

from

$1914.99

At Shift Pro Inc, fully remanufactured transmissions go beyond the name. So, what’s in that name to start? Pro Engineering: your transmission has been re-engineered to meet or exceed OE standards for tolerances, durability, and quality. Pro Performance: upgraded components and a fully remanufactured torque converter add to enhanced durability over your transmission’s lifetime. Pro Performance: hot-, cold-, load-, and simulated road-tested on custom dynamometers, your transmission is ready to go, wherever you’re headed.

Product Features:

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$1914.99

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$1719.99

Moveras Remanufactured Transmissions manufactures automatic transmissions for virtually every vehicle on the road.

Product Features:

Product might not be available in all states due to local laws.
We are committed to remanufacturing transmissions to the same stAndards And methodologies used for OEM transmissions
Each Moveras transmission is produced in a World Class manufacturing facility
Our entire process has been developed from scratch, utilizing LEAN manufacturing principles
Our transmissions are produced in a Clean Room environment
Every transmission is built to the same exacting stAndards by using a precisely documented And controlled process.

from

$1719.99

Moveras Remanufactured Transmissions manufactures automatic transmissions for virtually every vehicle on the road.

Product Features:

Product might not be available in all states due to local laws.
We are committed to remanufacturing transmissions to the same stAndards And methodologies used for OEM transmissions
Each Moveras transmission is produced in a World Class manufacturing facility
Our entire process has been developed from scratch, utilizing LEAN manufacturing principles
Our transmissions are produced in a Clean Room environment
Every transmission is built to the same exacting stAndards by using a precisely documented And controlled process.

from

$205.86

Shift Interlock Sole

from

$142.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

Product Features:

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness

from

$135.00

Shift Interlock Sole

from

$47.99

AT CONTR SOLENOID

from

$36.99

from

$25.16

AT Shift Solenoid

Most Popular 2009 Hummer H3 Transmission Mounts

Customize your Hummer with 3 Transmission Mounts products like Transmission Mounts, all priced under $87.99.

show more show less

from

$23.49

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to CADI 99-14; CHEV 82-19; GMC 82-14; HUMMER 03-10; ISUZU 06-08; OLDS 91-94;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1982-2019
Weight approx: 5 Lbs
STUDS: M10-150
INTERLOCK
BOLT HOLES CENTERLINE: 7.5 INCH / 190.5 MM

from

$87.99

A true performance application component for cars, trucks, hot rods, racing/competition, yet popularly used for street vehicles when more horsepower is added. Soft running enough to absorb vibrations for street use yet rugged for racing use. Helps control torque on high performance vehicles. Maintains proper drive shaft angle to help prevent early wear and unexpected power train damage. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal transmission mounts. Resistant to under vehicle fluid oils, coolants and road contaminants. Made of Energy’s Hyper-Flex performance polyurethane and heavy duty hardware – for added durability.

Product Features:

Unique Safety Interlock Design
Impervious to Vehicle Oils and Chemicals
Strong Enough Too Handle High Performance

from

$83.99

Unique Safety Interlock Design
Impervious to Vehicle Oils and Chemicals
Strong Enough Too Handle High Performance

Top Picks for 2009 Hummer H3 Automatic Transmission Pan and Gaskets

Upgrade Hummer H3s with top-quality Automatic Transmission Pan and Gaskets parts, including 9 OEM and aftermarket selections for your 2009 model.

show more show less

from

$11.49

High torque and rigidity
Sensor-safe, non-corrosive formula
OEM specified
Low-odor, non-corrosive formula
Ideal for closed spaced bolt patterns

from

$6.99

High torque and rigidity
Sensor-safe, non-corrosive formula
OEM specified
Low-odor, non-corrosive formula
Ideal for closed spaced bolt patterns

from

$19.99

Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:

Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
Sensor-safe, non-corrosive, RTV silicone
Protects against leaks caused by vibration and thermal expansion
Meets performance specs of OE silicone gaskets
Quickly returns vehicle to service in just 1 minute

from

$10.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$16.99

Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
Sensor-safe, non-corrosive, RTV silicone
Protects against leaks caused by vibration and thermal expansion
Meets performance specs of OE silicone gaskets
Quickly returns vehicle to service in just 90 minutes

from

$10.99

AT OIL PUMP GASKET

from

$13.99

AT OIL PAN GASKET

from

$28.49

Specifically designed to perform under higher torque loads associated with engines having closely spaced bolt patterns (typically import vehicles). This product is blowout resistant, allowing leakproof gaskets to be made and put into service in just one minute. Sensor-safe, The Right Stuff GREY seals instantly, forming a reliable, long lasting elastomeric rubber gasket that outperforms pre-molded gaskets. Specified by major import OEMs, this material is resistant to powertrain fluids (oil, coolant and ATF) and operates in environments to 450°F (232°C) continuous; 500°F (260°C) intermittent.

Product Features:

Ideal for rigid cast aluminum parts
Meets OEM Specifications
Sensor safe & non-corrosive
Performs under higher torque loads associated with engines having closely spaced bolt patterns (typical of import vehicles)
Blowout resistant, allowing leakproof gaskets to be made in just one minute
Seals instantly, forming a reliable, long lasting elastomeric rubber gasket
Superior resistance to powertrain fluids including engine oil, transmission fluid, gear lube and coolants
Temperature range -60°C to 260°C (-75°F to 500°F) intermittent
Applications: Automotive, industrial and marine gaskets, valve covers, gearbox covers, pumps, compressors, oil pans, thermostat housings, water pumps, etc.

from

$32.99

OEM specified. Designed specially for high-torque and high vibration applications, like those common in import engines, this premium RTV gasket maker exceeds manufacturers’ performance requirements. Sensor-safe, low odor, and non-corrosive. Maximum vibration resistance, with outstanding resistance to oils, cooling and shop fluids. Temperature range -65ºF to 500ºF (-54 Deg. C to 260 Deg. C) intermittent.

Product Features:

Designed specially for high-torque and high vibration applications
Maximum vibration resistance with outstanding resistance to oils, cooling and shop fluids
OEM specified
Low-odor, non-corrosive formula
Temperature Range: -65 Deg. F to 500 Deg. F (-54 Deg. C to 260 Deg. C)

In-Demand Transmission Cooler and Parts for 2009 Hummer H3s

Select from 2 premium Transmission Cooler and Parts parts for your 2009 Hummer H3, with prices ranging from $45.09 to $45.99.

show more show less

from

$45.99

This automatic transmission oil cooler hose assembly is designed to match the fit and function of an original assembly. It is engineered from durable components as a reliable replacement for leaking or damaged lines on specified vehicles.

Product Features:

Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years
Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage
Durable construction – made of quality materials for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$45.09

AT Cooling Hose

Most Sold 2009 Hummer H3 Transmission Seals

Explore our best-selling Hummer parts for the 2009 H3 among 15 OEM and aftermarket options starting from $2.49.

show more show less

from

$14.79

Design type: spring loaded; multi-lip
Temperature range: -20°F to 300°F / -29°C to 49°C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$12.79

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$6.99

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$11.99

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$13.29

Product Features:

Brand may vary by location

from

$8.49

Product Features:

Brand may vary by location

from

$2.49

Product Features:

Brand may vary by location

from

$23.59

Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.

from

$6.49

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$47.99

GENERAL SEAL

from

$12.32

AT Pump Seal

from

$8.69

SHAFT SEAL

from

$7.49

SHAFT SEAL

from

$3.99

Shift Shaft O-Ring

from

$2.62

Oil Dipstick Seal

Top-Rated Transmission Parts Brands For Your 2009 Hummer H3

Shop for the best-rated brands offering Transmission Parts and other products for your 2009 Hummer H3s. Below you’ll find some of our best rated Transmission Parts from Permatex, National, and Dorman, and more. Transmission Parts from these brands that fit a 2009 H3 start at just $6.49 and are rated as high as 5 stars. OEM and aftermarket Transmission Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Permatex 2009 Hummer H3 Transmission Parts

When it comes to maintaining or upgrading your 2009 Hummer H3, using quality Transmission Parts is essential to ensure durability and a perfect fit. Permatex ticks all of those boxes. We offer a wide selection of Permatex Transmission Parts, specifically designed for the 2009 Hummer H3. With over 6 Permatex brand Transmission Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.99, with an average price of just $19.49. Plus, with over 106 customer reviews and an average rating of 5 stars, you can trust that our Permatex Transmission Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$32.99

This product is not rated

Ultra Grey RTV Gasket Maker (9.5 oz.)

“”

from
$16.99

This product is not rated

The Right Stuff: Grey, 90 Minute Gasket Maker, 3 OZ

“”

from
$28.49

This product is not rated

The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge

“”

Popular National 2009 Hummer H3 Transmission Parts

National auto parts is one of the highest quality Transmission Part brands in the market. Any 2009 Hummer H3 owner should feel confident when installing genuine National parts in their vehicle. To ensure the best fit and performance for your 2009 H3, Advance Auto Parts carries a full inventory of 11 National Transmission Parts. Plus you will be keeping your Hummer in peak condition while saving money because prices on these National Transmission Parts range from $6.49 to $38.49, plus, with more than 50 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Transmission Parts below will deliver on both quality and value.

from
$38.49

This product is not rated

Shaft Repair Sleeve

“”

from
$6.49

This product is not rated

Multi Purpose Seal

“”

from
$11.99

This product is not rated

Multi Purpose Seal

“”

FAQs for 2009 Hummer H3 Transmission Parts

Which Transmission Parts are best-sellers for 2009 Hummer H3s?

Out of 100 Transmission Parts that fit 2009 Hummer H3s, the following parts are the top sellers:

Transmission Mount: Rear, 1 Piece (5303486) – $23.49
Transmission Oil Pan Gasket (5781647) – $10.99
Torque Convertor Bolts (11839775) – $9.49

What’s the price range for 2009 Hummer H3 Transmission Parts?

Transmission Part prices for the 2009 Hummer H3 start at $2.49 and go up to $2,411.00 for the most premium parts.

What’s the average price of a Transmission Part for a 2009 Hummer H3?

The average price for Transmission Parts for the 2009 Hummer H3 is $195.45. Keep in mind the variety of part types within our Transmission Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Transmission Parts for other Hummer H3 model years?

Yes, we currently carry Transmission Parts for 4 model years of Hummer H3s between 2006 and 2010. Transmission Parts are bought most frequently for the following model years: 2010, 2008, 2007, and 2006.

What are the cheapest Transmission Parts for my 2009 Hummer H3?

The cheapest 2009 Hummer H3 Transmission Parts we carry in stock are:

Auto Transmission Shift Shaft Seal (11407786) – $2.49
Oil Dipstick Seal (11844774) – $2.62
Oil Seal (5440149) – $3.49
TCaseShiftForkInsert (12008219) – $3.99
Shift Shaft O-Ring (12009712) – $3.99

What are the top-rated Transmission Parts that fit the 2009 Hummer H3?

Out of 978 reviews by customers, our 2009 Hummer H3 Transmission Parts have an average customer rating of . These are some of the highest-rated Transmission Part types for the 2009 Hummer H3 and their top-rated products:

Automatic Transmission Pan and Gaskets
- Sensor-Safe, High Torque RTV Silicone Gasket Maker (99997948) – $6.99
- Sensor-Safe, High-Torque RTV Silicone Gasket Maker (7160017) – $11.49
- The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ (11082073) – $19.99
Transmission Bearings
- Sensor-Safe, High Torque RTV Silicone Gasket Maker (99997948) – $6.99
- Sensor-Safe, High-Torque RTV Silicone Gasket Maker (7160017) – $11.49
- The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ (11082073) – $19.99
Transmission Connectors
- Sensor-Safe, High Torque RTV Silicone Gasket Maker (99997948) – $6.99
- Sensor-Safe, High-Torque RTV Silicone Gasket Maker (7160017) – $11.49
- The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ (11082073) – $19.99

What types of Transmission Parts do you sell for my 2009 Hummer H3?

As of 2/5/25, these are some of the most in-demand types of Transmission Parts for a 2009 Hummer H3:

Can I get help with 2009 Hummer H3 Transmission Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Hummer Transmission Parts and more.

What is your return policy for Hummer H3 Transmission Parts?

Advance Auto Parts keeps returns simple. For new Hummer H3 Transmission Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2009 Hummer H3 Transmission Parts

ARP Auto Racing – For Use With General Motors, 0.590"L Under Head, 10Mm X 1.5 Thread, With Washers (Part No.230-7305)

Permatex – The Right Stuff: Grey, 90 Minute Gasket Maker, 3 OZ (Part No.34328)

ACDelco – GM Original Equipment Transmission Control Module- Remanufactured (Part No.J2503576976ACD)

GM Genuine Parts – Gray Multi-Purpose Relay (Part No.19116059)

ACDelco – Shift Interlock Sole (Part No.J4081587082ACD)

Carquest Premium – ABS Wheel Speed Sensor Connector (Part No.PTA1078)

National – Multi Purpose Seal (Part No.4934)

ATP – AT/HARNESS VSS REPR (Part No.JE-15)

Carquest Premium – ABS Wheel Speed Sensor (Part No.ARA1795)

Vemo – AT Kickdown Solenoid (Part No.J4005209874VMO)

ATP – AUTO TRANS BAND (Part No.CX-42)

Driveworks – Taper Bearing Set (Part No.S-A-36)

Dorman – Help – Shift Lever Arm (Part No.74124)

NTK – ABS Wheel Speed Sensor (Part No.VB0037)

Carquest – Neutral Safety Switch (Part No.NS38029)

ATP – AT OIL PUMP SEAL (Part No.CO-37)

National – Multi Purpose Seal (Part No.330385)

National – Bearings (Part No.A-36)

GM Genuine Parts – Transmission Control Module (Part No.24252114)

ACDelco – Multi-Purpose Pigtail (Part No.PT2834)

National – Multi Purpose Seal (Part No.710689)

Driveworks – Oil Seal (Part No.S-3227)

ACDelco – Neutral Safety Switc (Part No.J4050351665ACD)

SKF – Pinion Seal (Part No.J7010211703SKF)

ACDelco – AT Cooling Hose Fitt (Part No.J2010576944ACD)

Mahle – Oil Dipstick Seal (Part No.A1120666332MAH)

Felpro – Transmission Oil Pan Gasket (Part No.TOS 18663)

Permatex – Sensor-Safe, High-Torque RTV Silicone Gasket Maker (Part No.82194)

Dorman – Help – Shift Lever Arm (Part No.74124)

ATP – Shift Solenoid (Part No.CE-14)

Pro-King – Automatic Transmission Solenoid (Part No.52-0214)

Dorman – Help – Clutch Pedal Linkage Bushing (Part No.74014)

GM Genuine Parts – Transmission Control Module (Part No.24252114)

ATP – AT CONTR SOLENOID (Part No.JE-8)

Dorman – Transmission Shift Interlock Solenoid (Part No.924-978)

ATP – AUTO TRANS BAND (Part No.CX-42)

ATP – ATP Automatic Transmission Control Solenoid (Lock-Up) (Part No.CE-1)

Dorman – Remanufactured Transmission Control Module (Part No.599-120)

ACDelco – Automatic Transmission Solenoid (Part No.J4006209907ACD)

Vemo – AT Kickdown Solenoid (Part No.J4005209874VMO)

ACDelco – GM Original Equipment Transmission Control Module- Remanufactured (Part No.J2503576976ACD)

ATP – ATHARNESS VSS REPR (Part No.JE-24)

Spartan – Automatic Transmission Assembly; GM 4WD 4L60E 4-Speed (Part No.8911A-MB)

Spartan – Automatic Transmission Assembly; GM 4WD 4L60E 4-Speed (Part No.7271AA-67)

Premium Drive Train – Automatic Transmission Assembly (Part No.T4L60E5309T4)

Premium Drive Train – Automatic Transmission Assembly (Part No.T4L60E2909T4)

Shift Pro by ETE – 4L60E Automatic Transmission Assembly (Part No.T260063)

Shift Pro by ETE – 4L60E Automatic Transmission Assembly (Part No.T260014)

Moveras – 4L60E – Automatic Transmission (Part No.M01837)

Moveras – 4L60E – Automatic Transmission (Part No.M01946)

ACDelco – Shift Interlock Sole (Part No.J4081587082ACD)

Carquest Premium – Premium Shift Interlock Solenoid TCA2052 (Part No.TCA2052)

Dorman – Shift Interlock Sole (Part No.J40811317355DOR)

ATP – AT CONTR SOLENOID (Part No.CE-15)

Carquest Premium – Automatic Transmission Pressure Control Solenoid (Part No.TCA1008)

ACDelco – AT Shift Solenoid (Part No.J4006209918ACD)

Anchor – Transmission Mount: Rear, 1 Piece (Part No.2638)

Energy Suspension – Transmission Mount (Part No.3.1129G)

Energy Suspension – Transmission Mount (Part No.3.1129R)

Permatex – Sensor-Safe, High-Torque RTV Silicone Gasket Maker (Part No.82194)

Permatex – Sensor-Safe, High Torque RTV Silicone Gasket Maker (Part No.22074)

Permatex – The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ (Part No.25238)

Felpro – Transmission Oil Pan Gasket (Part No.TOS 18663)

Permatex – The Right Stuff: Grey, 90 Minute Gasket Maker, 3 OZ (Part No.34328)

ATP – AT OIL PUMP GASKET (Part No.SG-40)

ATP – AT OIL PAN GASKET (Part No.SG-30)

Permatex – The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge (Part No.34311)

Permatex – Ultra Grey RTV Gasket Maker (9.5 oz.) (Part No.85084)

Dorman – Transmission Oil Cooler Line: Exact Fit, Metal/Rubber (Part No.624-630)

ACDelco – AT Cooling Hose (Part No.J2000585018ACD)

National – Multi Purpose Seal (Part No.4934)

National – Multi Purpose Seal (Part No.4583)

National – Multi Purpose Seal (Part No.8792S)

National – Multi Purpose Seal (Part No.710689)

Driveworks – Transfer Case Output Shaft Seal (Part No.S-4503N)

Driveworks – Auto Transmission Output Shaft Seal (Part No.S-4934)

Driveworks – Auto Transmission Shift Shaft Seal (Part No.S-8792S)

Motive Gear – Differential Pinion Seal (Part No.12479267)

National – Multi Purpose Seal (Part No.330385)