2009 GMC Sierra 2500 HD Exhaust System Kits

Designed to provide maximum performance and maximum value our Performance Series features 100 Percent aluminized steel at a no nonsense price. These systems are designed to provide the MBRP performance and sound you have grown to love to those who are operating on a tight budget. Featuring a two piece tail pipe and bolt-on hangers these systems fit and perform just like our more expensive series at a price point that cannot be beaten. A performance exhaust system is much like a musical instrument. Quality engineering is important, hundreds of test Miles and hundreds of Hours are invested into every system to guarantee you the greatest sound. Durability and performance available from any exhaust system anywhere.

Product Features:

• The Lowest Bend Degree Angles And Smooth Mandrel Bends Mean That Exhaust Gases Have An Easier Path To The Tip, Move Faster And Reduce Exhaust Gas Temperatures
• Vehicle Maintains Optimal Operating Temperatures
• Fits Right The First Time. Rigorous Testing Procedures Ensure That Every Component Will Fit As Expected
• Each Kit Is Designed To Fit As Many Configurations Of The Same Vehicle As Possible
• 100 Percent Aluminized Steel
• Features A Two Piece Tail Pipe And Bolt-On Hangers
• Easy, Bolt-On Design, Makes Easy To Install

Built from 16 Gauge T409 stainless steel our SLM Series performance exhaust systems offer a value price without compromising on the quality built into every component. Featuring a two piece tail we replaced the muffler with an MBRP muffler delete pipe to provide you with the ultimate in free flow exhaust. Constructed to the same specifications as our top of the line Pro Series we back this line with a 5 Year Warranty.

Product Features:

• Built From 16 Gauge T409 Stainless Steel
• More Pulling Power, Improved Throttle Response And Greater Fuel Efficiency
• Bolt-On, No Weld Design
• Bolt-On, No Weld Design Makes Installation A No Hassle One

Simple Installation: All systems use factory mounting locations providing stability and hassle-free installation. Leak-Free Seal: High quality band clamps are included for a complete 360 degree sealing surface. OE Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE-style fit that does not change with time. Flow and Performance This exhaust system is constructed of 4″ mandrel-bent stainless steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGT’s. 5″ Diameter Polished Intercooled Tips: Finishing off the exhaust are 5″ diameter, polished, stainless steel straight cut tips with intercooling vents designed to reduce exhaust gas temperatures at the tailpipe. A unique stainless steel laser-cut aFe Power logo plate is riveted on for an aggressive style. **Cutting stock exhaust is required.

Product Features:

• Mandrel Bent Stainless Steel Tubing
• High Quality Band Clamp
• OE Style Bayonet Hangers For Secure Fitment
• Factory Mounting Locations For A Quick Hassle Free Installation

Interested in a new exhaust system for your L5P Duramax? Check out the ATLAS dual DPF-Back exhaust system by aFe. This system is constructed from 4″ mandrel-bent aluminized steel tubing and uses high quality band clamps and OE-style bayonet hangers. This unit uses all factory mounting locations and comes with a bolt-on bracket that supports the driver side tailpipe. This provides for a quick, hassle-free installation with no modification necessary. Also included in this exhaust system are dual massive 6″ polished 304 stainless steel tips with laser-cut stainless steel aFe power badges. ATLAS exhaust systems are the perfect combination of performance, fit and value. Single To Dual Exhaust Conversion: This exhaust is designed to convert the standard single exhaust into an aggressive dual exhaust. Fits With Spare Tire: This exhaust system fits perfectly without relocating the spare tire. OE Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time. Flow and Performance: This ATLAS exhaust system is constructed of 4″ mandrel-bent aluminized steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGT’s. Dual Massive 6″ Black Tips: Finishing off the exhaust are dual powder-coated high temp black 304 stainless steel exhaust tips. This tip features a laser-cut stainless steel aFe power badge for an aggressive style.

Product Features:

• Mandrel Bent Aluminized Steel Tubing
• High Quality Band Clamp
• OE Style Bayonet Hangers For Secure Fitment
• Factory Mounting Locations

The Street Series Black Performance Exhaust system delivers dyno proven power with a comfortable interior sound and performance exterior sound. Features Black coated tips.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

Built from 16 Gauge T409 stainless steel our SLM Series performance exhaust systems offer a value price without compromising on the quality built into every component. Featuring a two piece tail we replaced the muffler with an MBRP muffler delete pipe to provide you with the ultimate in free flow exhaust. Constructed to the same specifications as our top of the line Pro Series we back this line with a 5 Year Warranty.

Product Features:

• Built From 16 Gauge T409 Stainless Steel
• More Pulling Power, Improved Throttle Response And Greater Fuel Efficiency
• MBRP Performance Exhaust System Has Been Specifically Tuned To Get The Optimal Sound From Pickup

Interested in a new exhaust system for your LML Duramax? Check out the ATLAS DPF-Back exhaust system by aFe. This system is constructed from 5″ mandrel-bent aluminized steel tubing and uses high quality band clamps and OE-style bayonet hangers. This unit uses all factory mounting locations to provide a quick, hassle-free installation. Also included in this exhaust system is a massive 6″ diameter, polished 304 stainless steel tip with a laser-cut stainless steel aFe power badge. ATLAS exhaust systems are the perfect combination of performance, fit and value. Simple Installation: All systems use factory mounting locations providing stability and hassle-free installation. Leak-Free Seal: High quality band clamps are included for a complete 360 degree sealing surface. OE Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time. Flow and Performance: This ATLAS exhaust system is constructed of 5″ mandrel-bent aluminized steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGT’s. 6″ Diameter Polished Intercooled Tip: Finishing off the exhaust is a 6″ diameter, high luster polished, stainless steel slash cut tip with intercooling vents designed to reduce exhaust gas temperatures at the tailpipe. A unique stainless steel laser-cut aFe Power logo plate is riveted on for an aggressive style.

Product Features:

• Mandrel Bent Tubing For Maximum Flow
• Utilizes Factory Mounting Locations
• Quick Hassle Free Installation
• Massive Intercooled Tip w/Laser Cut aFe Power Badge

The MagnaFlow Street Series Cat-Back Performance Exhaust System 19026 brings out the personality of your Truck with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 4in. main piping and 2 Straight-Through mufflers ending in a Single Passenger Side Rear exit with 5in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Truck exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Truck’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19026 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19026 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

ARMOR LITE Series exhaust systems are a value option with the same fitment, performance and sound as the premium products from MBRP. Heavy-gauge Aluminized Steel tubing helps to resist dings and dents caused by debris under your vehicle. This material can be a great choice for you if you live in a dry climate that does not see much precipitation, or if you are looking for great sound on a budget. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine cylinders, allowing it to produce more power and improve vehicle performance and longevity.

Product Features:

• Built From Heavy-Duty Aluminized Steel
• More Pulling Power, Improved Throttle Response And Greater Fuel Efficiency
• MBRP Performance Exhaust System Has Been Specifically Tuned To Get The Optimal Sound From Pickup
• Stamped Logo On The Tip And Unmistakable Styling
• Bolt-On, No Weld Design Makes Installation A No Hassle One

This exhaust manifold to cylinder head repair clamp is designed to match the fit and function of the original clamp on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Saves time – When an exhaust manifold fastener breaks, this exhaust manifold repair clamp saves time by creating a seal without needing to extract the broken stud
• Location-specific – engineered to fit the exhaust manifold on specified GM and Isuzu vehicles on the front right on vehicles without EGR valve, or rear left
• Complete kit – includes clamp and fasteners for a thorough, secure repair
• Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

This exhaust manifold to cylinder head repair clamp is designed to match the fit and function of the original clamp on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Saves time – When an exhaust manifold fastener breaks, this exhaust manifold repair clamp saves time by creating a seal without needing to extract the broken stud
• Location-specific – engineered to fit the exhaust manifold center on specified GM and Hummer vehicles
• Complete kit – includes clamp and fasteners for a thorough, secure repair
• Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

Our Exhaust Manifold Hardware Kit comes with the necessary installation components to assist you in replacing your manifold. Save time and energy by having the right hardware on hand when you need it.

Product Features:

• Direct replacement for a proper fit every time
• Durable steel construction
• Repair kit helps to secure exhaust manifold to the vehicle engine head
• Manufactured to strict engineering quality standards

This exhaust manifold to cylinder head repair clamp is designed to match the fit and function of the original clamp on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Saves time – When an exhaust manifold fastener breaks, this exhaust manifold repair clamp saves time by creating a seal without needing to extract the broken stud
• Location-specific – engineered to fit the exhaust manifold on the front left or rear right on specified GM and Isuzu vehicles
• Complete kit – includes clamp and fasteners for a thorough, secure repair
• Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

This exhaust gas temperature (EGT) sensor bung repair kit is designed to match the original components required to repair the sensor bung on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

• Cost-effective fix – this EGT sensor bung repair kit allows direct replacement of only a failed bung, rather than an entire exhaust pipe
• Weld-on plate – bung comes with steel plate for repairing pipe if damaged during bung removal
• Application specific – designed for a wide range of vehicle years, makes and models
• This part has undergone vehicle try-on testing for conformance to product standards and quality