2009 GMC C4500 Topkick Fuel and Emissions Systems

Name: Manifold Absolute Pressure Sensor (MAP)
Brand: Carquest Premium
SKU: ECC1082
Price: 136.99 USD

Below you will find various in-demand GMC Fuel and Emissions Systems, components and accessories for your 2009 C4500 Topkick. Advance Auto Parts has popular C4500 Topkick parts like Oxygen Sensors, Air Flow Sensors, Fuel Pumps and more. You’ll also find aftermarket and OEM Fuel and Emissions Systems for other C4500 Topkick model years including 2003, 2004, 2005, 2006, 2007, 2008 and more. Select a category of 2009 GMC C4500 Topkick Fuel and Emissions Systems below and start saving instantly.

Popular 2009 GMC C4500 Topkick Fuel and Emissions Systems Categories

Fuel Pressure Sensors

Air Flow Meters and Mass Air

Gas Caps

Vacuum Pumps

Fuel Injector Installation Kits

Fuel Injection Pumps

MAP-Barometric Pressures

Vacuum Reservoirs

Secondary Air Injection Pipe Retainer

Manifold Air Pressure Sensors

Canister Purge Solenoids

EGR Valves

Fuel Injectors

EGR Coolers

Water In Fuel Sensors

Pressure Regulators

Air Charge Temperature Sensors

Fuel Injector O-Ring Kits

Secondary Air Injection Relays

Fuel Level Sensors

Fuel Injector Connectors

Diesel Fuel Filter Bleeder Screws

Mass Air Flow Sensor Connectors

Oxygen Sensor Connectors

Secondary Air Injection Pump Connectors

Fuel Cap Tester Adapters

EGR Valve Motor Connectors

Essential Fuel and Emissions Systems for 2009 GMC C4500 Topkicks

from

$136.99

CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:

CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.

from

$24.49

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$374.99

from

$424.99

This EGR cooler has been engineered to match the fit and function of the original EGR cooler on specific vehicle years, makes and models. It has undergone rigorous testing and OEM benchmarking to ensure reliability.

Product Features:

Improved reliability – this replacement EGR cooler features a spiral tube design, reducing clogging experienced with the original manufacturer’s design.
Superior durability – precision-engineered using welded stainless steel for long service life.
Rigorously tested – heat transfer testing, burst testing and vehicle try-on testing ensures fit and reliability
Hardware included – all necessary O-rings, gaskets, and application-specific hardware included

from

$27.99

This vacuum reservoir is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this vacuum reservoir is designed to match the fit and function of the original part on specified vehicles.
Ideal solution – this reservoir is a reliable replacement for an original part that is missing or damaged
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$299.99

This fuel pressure regulator is engineered to match the function of the original equipment regulator on specified vehicles. It is engineered to help ensure proper fuel injection pressure when the original regulator has failed or is malfunctioning.

Product Features:

Direct replacement – this fuel pressure regulator is designed to match the fit and function of the original equipment regulator on specified vehicle.
Ideal solution – engineered to help ensure proper fuel injection pressure when the original regulator has failed or is malfunctioning.
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$321.99

Fuel Level Sensor

from

$43.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$15.99

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

from

$275.99

CARQUEST premium remanufactured injectors are completely torn down, ultrasonically cleaned, inspected and remanufactured using premium components. Each injector is 100% tested on a sophisticated flow bench under multiple operating parameters to meet or exceed OE specifications.

Product Features:

Each unit is 100% tested to OE specifications
Includes 100% replacement of the fuel fitting, edge filter and retaining pin to ensure a leak-free connection
Includes 100% new stator solenoid to ensure precise fuel injection timing
Includes 100% replacement of nozzle to ensure accurate and precise injection under all operating parameters
Includes all new premium quality O-rings and seals
Includes copper combustion gasket
Includes application specific technical bulletin which highlights critical aspects of the job and offers technical tips for proper installation

from

$13.79

The components in this fuel injector O-ring kit are designed to match the fit of the original O-rings on specified vehicles. They are engineered to help ensure leak-free connections to the fuel injectors during service or when the rings are damaged.

Product Features:

Direct replacements – the components in this fuel injector O-ring kit are designed to match the fit of the original O-rings on specified vehicles.
Ideal solution – engineered to help ensure leak-free connections to the fuel injectors during service or when the rings are damaged.
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$19.99

from

$220.99

This vacuum pump matches the fit and function of the original equipment pump. Made of durable materials for reliable service, this replacement pump is built to ensure reliable operation of vacuum-operated vehicle functions.

Product Features:

Ideal replacement – this vacuum pump matches the fit and function of the original equipment pump to restore operation of vacuum-operated functions.
Durable construction – this vacuum pump is made of quality materials to ensure reliable performance and a long service life.
Cost-effective solution – offers original equipment performance at competitive price
Quality tested – this part has undergone try-on testing to ensure a quality fit

from

$4.49

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$25.99

Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK¿s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK¿s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

Air Charge Temperature Sensors are designed to meet or exceed OE specifications in form, fit and function to ensure proper monitoring of air temperature entering the engine
NTK’s Engine Coolant Temperature Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper engine operating temperature.

from

$27.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$49.99

Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

NTK’s Water in Fuel Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to monitor the presence of water in the vehicle’s fuel.
The Water In Fuel Sensor reports to the Powertrain Control Module (PCM) when water has been detected in the fuel system.

from

$67.05

Driveworks® offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:

Direct-fit OE replacement ensures ease of installation
Designed to meet OE performance
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need

from

$64.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$56.99

Fuel injector return line kit includes fuel line, injector fittings, fitting seals and retaining clips. Services one side of engine.

Product Features:

Includes fuel return line
Includes 4 plastic injector return fittings
Includes 4 metal fitting clips
Includes 4 fitting O-rings
Premium OE quality materials
Services one side of engine

from

$41.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$48.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$376.99

from

$23.79

This diesel fuel filter bleeder screw is designed to match the fit & function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this diesel fuel filter bleeder screw matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this screw is a reliable replacement for an original part that is missing or has failed due to fatigue.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
PLEASE NOTE: Item is priced and sold by each. See store for details.

from

$836.99

CARQUEST premium remanufactured high-pressure fuel pumps are completely torn down, ultrasonically cleaned, inspected and remanufactured using premium components. Each pump is 100% tested on a sophisticated flow bench under multiple operating parameters to meet or exceed OE specifications.

Product Features:

Each unit is 100% tested to OE specifications
Includes pump mounted regulator

from

$90.99

CARDONE Remanufactured Mass Air Flow Sensors (MAFS) precisely track O.E. output curves and maintain specific tolerances to ensure accurate scan tool readings for proper operation. 100% re-soldering of critical components ensures superior electrical connections, eliminates intermittent failures and lengthens product life. With CARDONE Mass Air Flow Sensors (MAFS), you can expect smooth vehicle performance.

Product Features:

100% re-solder of critical components ensures superior electrical connections, no intermittent failures and longer product life.
On-car vehicle validation routines ensure that modules meet all form, fit, durability and performance requirements.
All modules are 100% tested with automated computer test equipment to ensure full functionality and reliability.
Our sensors precisely track O.E. output curves and maintain spec tolerances to ensure accurate feedback to the vehicle┐s engine control management system.
Components are rated to handle demanding temperature variations for optimum reliability in every environment.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$12.49

Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$23.99

Experience uncompromising quality and emissions compliance with these tethered fuel caps. Manufactured with top-tier materials and rigorous production and safety standards adhering to Original Equipment Manufacturer guidelines. Designed meticulously to meet both state and federal emissions requirements, it ensures environmental responsibility. With its specifically engineered pressure and vacuum relief valves, fuel evaporation becomes a thing of the past. Bid farewell to the risk of losing up to 30 gallons of precious gasoline over a year due to a leaking fuel cap. Trust in our superior construction to safeguard your fuel and contribute to a greener future.

Upgrade your 2009 GMC C4500 Topkick with Top-Quality Fuel and Emissions Systems

When it comes to maintaining or upgrading your 2009 GMC C4500 Topkick, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your GMC or enhancing its overall performance, Fuel and Emissions Systems are key to keeping your C4500 Topkick functioning at its best. At Advance Auto Parts, we offer a wide selection of 54 Fuel and Emissions Systems for the 2009 GMC C4500 Topkick, designed to meet your needs without breaking the bank. From Oxygen Sensor replacements to Air Flow Sensors upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Fuel and Emissions Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Fuel and Emissions Systems for your 2009 GMC C4500 Topkick at great prices. Our Fuel and Emissions Systems inventory for this model ranges from just $3.99 to $1,409.99, with an average price of $202.87. Our 54 Fuel and Emissions Systems in stock come from 10 trusted brands, so you’re sure to find the right part for your 2009 GMC C4500 Topkick without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2009 GMC C4500 Topkick, we stock popular OEM and aftermarket Fuel and Emissions Systems from top names like Carquest Premium Delphi, and more. Carquest Premium Fuel and Emissions Systems start at just $6.99 and boast an impressive 4 stars average rating from customers. With 2,717 customer reviews and counting, our 2009 GMC C4500 Topkick Fuel and Emissions Systems have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Fuel and Emissions System upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals and more to make sure your 2009 GMC C4500 Topkick is always ready to roll. We’re committed to providing you with everything you need to keep your C4500 Topkick in top shape, all in one place. Start shopping confidently below for your 2009 GMC C4500 Topkick!

Best-Selling Oxygen Sensors for 2009 GMC C4500 Topkicks

Enhance the driving experience in your GMC with 1 quality Oxygen Sensor components, starting at $34.99.

show more show less

from

$34.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

Most Popular 2009 GMC C4500 Topkick Air Flow Sensors

Customize your GMC with 7 Air Flow Sensors products like MAP-Barometric Pressures, Manifold Air Pressure Sensors, and Air Charge Temperature Sensors, all priced under $136.99.

show more show less

from

$67.05

Direct-fit OE replacement ensures ease of installation
Designed to meet OE performance
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need

from

$25.99

Air Charge Temperature Sensors are designed to meet or exceed OE specifications in form, fit and function to ensure proper monitoring of air temperature entering the engine
NTK’s Engine Coolant Temperature Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper engine operating temperature.

from

$75.99

NTK’s Manifold Absolute Pressure Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper manifold pressure, fuel metering and ignition timing.
The Manifold Absolute Pressure Sensor (MAP) provides manifold pressure information to the Engine Control Unit (ECU). The data is used to determine the air mass flow rate and required fuel for optimum combustion and ignition timing.

from

$136.99

CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:

CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.

from

$24.49

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$102.99

ACDelco Professional Manifold Absolute Pressure Sensor is a high quality aftermarket replacement component for one or more of the following vehicle systems: engine – mechanical. This premium aftermarket sensor is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$94.99

CARQUEST premium engine management products provide the right automatic transmission speed sensor for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions. Designed to meet OE quali

Product Features:

Lifecycle tested to meet or exceed OE specifications
Direct OE replacement
High strength thermoplastic is resistant to shock, temperature and chemicals. Also protects internal components from moisture and contaminants.
Global coverage for import and/or domestic applications.

Top Picks for 2009 GMC C4500 Topkick Fuel Pumps

Upgrade GMC C4500 Topkicks with top-quality Fuel Pumps parts, including 5 OEM and aftermarket selections for your 2009 model.

show more show less

from

$1409.99

CARDONE Remanufactured Fuel Injection Pumps are application specific pumps that expand across a variety of platforms. Our diesel injector pumps are precision wound with trimmed solenoid windings to ensure accurate and precise delivery of fuel from the electronic control module (ECU). This allows for smooth engine operation, improved fuel consumption, reduced harmful emissions, instant throttle response, and optimal fuel atomization, providing a quality product both you and your vehicle can rely on.

Product Features:

All gaskets, O-rings and bearings are replaced 100% to ensure optimal performance
Each assembled unit is individually calibrated and tested to ensure it meets or exceeds O.E.M. form, fit and function
All components are renewed or replaced as necessary to ensure high quality and durability
When applicable, improvements based on typical failure modes of original units are incorporated into the design and manufacture of replacement component parts, which translates into longer service life and less down-time for the driver
Guaranteed fit and function
Meets or exceeds O.E.M. performance

from

$836.99

Each unit is 100% tested to OE specifications
Includes pump mounted regulator

from

$679.99

This diesel fuel injection pump has been thoroughly remanufactured using an exclusive process to ensure optimum quality and reliability. Critical components are replaced and clearances are verified after cleaning, reassembly and testing.

Product Features:

Ideal replacement – this remanufactured common rail fuel injection pump restores lost performance from a worn original equipment injection pump
Thoroughly remanufactured – this fuel injector pump has been completely disassembled, cleaned, inspected, reassembled with new internal components and tested to be leak-free
Cost-effective solution – offers original equipment quality at competitive price
Quality tested – this part has undergone calibration to application-specific requirement and tested to ensure performance

from

$34.99

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

from

$15.99

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

In-Demand Gas Caps for 2009 GMC C4500 Topkicks

Select from 12 premium Gas Caps parts for your 2009 GMC C4500 Topkick, with prices ranging from $6.99 to $24.99.

show more show less

from

$11.99

None

Product Features:

Protects your fuel from theft and vandalism
Manufactured from durable, long-life materials
Independently tested for emission control
Passes all state and federal emissions tests
Reduces air pollution with proper sealing and venting

from

$14.99

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$15.49

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$15.79

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$24.99

Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$16.79

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control
“Torque Override” feature aids in the proper installation of the fuel cap. It produces an audible click as the O-ring that seals the cap is properly compressed.

from

$23.99

None

Product Features:

Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$21.79

Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$22.99

Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$6.99

None

Product Features:

Protects your fuel from theft and vandalism
Manufactured from durable, long-life materials
Independently tested for emission control
Passes all state and federal emissions tests
Reduces air pollution with proper sealing and venting

from

$23.99

from

$10.99

None

Product Features:

Protects your fuel from theft and vandalism
Manufactured from durable, long-life materials
Independently tested for emission control
Passes all state and federal emissions tests
Reduces air pollution with proper sealing and venting

Most Sold 2009 GMC C4500 Topkick Fuel Injectors

Explore our best-selling GMC parts for the 2009 C4500 Topkick among 12 OEM and aftermarket options starting from $8.49.

show more show less

from

$129.99

100% new; Delphi OE Technology Validated to match the vehicle applications; Manufactured to meet or exceed OE requirements.

Product Features:

Delphi mass air flow sensors are the global benchmark for accuracy and signal noise
Delphi mass air flow sensors feature high quality sensing elements for outstanding performance over a wide range of ambient temperatures
Delphi is a manufacturer of OE mass air flow sensors since their first use over 30 years ago
All parts are calibrated and tested to match the OE part
Probe solution offered wherever possible to reduce repair time by eliminating the need to replace the flow tube.
Delphi OE technology validated to match the vehicle applications

from

$89.99

Advance Auto Parts is proud to carry all new mass air flow sensors that use high-quality components with the highest quality standards.

Product Features:

CARQUEST MAF use all new high-quality components at the highest quality standards.
Manufactured with new and advanced technology to perform, fit and function at OE specifications.
All new product that is tested with OEM equipment to OEM standards
Outperforms competition when tested in extreme environmental conditions

from

$41.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$56.99

Fuel injector return line kit includes fuel line, injector fittings, fitting seals and retaining clips. Services one side of engine.

Product Features:

Includes fuel return line
Includes 4 plastic injector return fittings
Includes 4 metal fitting clips
Includes 4 fitting O-rings
Premium OE quality materials
Services one side of engine

from

$485.99

Each unit is 100% tested to OE specifications
Includes 100% replacement of nozzle to ensure accurate and precise injection under all operating parameters
Includes all new premium quality O-rings and seals
Includes copper combustion gasket
Includes application specific technical bulletin which highlights critical aspects of the job and offers technical tips for proper installation

from

$417.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
Our fuel pressure regulators are application specific for the perfect fit and form
A robust engineering design for greater resistance to leakage
With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues

from

$859.99

CARDONE Remanufactured Fuel Injectors provide an alternative plug and play solution to fuel delivery for diesel applications. All units are flow tested and balanced and replaced with new O-rings and gaskets. Each unit retains OEM duty cycle and pulse width ensuring reliable performance. All units are built to meet or exceed OEM performance, providing a quality product both you and your vehicle can rely on.

Product Features:

All gaskets, O-rings and bearings are replaced 100% to ensure optimal performance
Each assembled unit is individually calibrated and tested to ensure it meets or exceeds O.E.M. form, fit and function
All components are renewed or replaced as necessary to ensure high quality and durability
When applicable, improvements based on typical failure modes of original units are incorporated into the design and manufacture of replacement component parts, which translates into longer service life and less down-time for the driver
Guaranteed fit and function
Meets or exceeds O.E.M. performance

from

$426.99

WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to

from

$399.99

This common rail diesel fuel injector has been thoroughly remanufactured using an exclusive process to ensure optimum quality and reliability. Critical components are replaced and clearances are verified after cleaning, reassembly and testing.

Product Features:

Ideal replacement – this remanufactured common rail fuel injector restores lost performance from a fouled original equipment injector
Thoroughly remanufactured – this fuel injector has been completely disassembled, cleaned, inspected, reassembled with new internal components and tested to be leak-free
Cost-effective solution – offers original equipment quality at competitive price
Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life

from

$90.99

100% re-solder of critical components ensures superior electrical connections, no intermittent failures and longer product life.
On-car vehicle validation routines ensure that modules meet all form, fit, durability and performance requirements.
All modules are 100% tested with automated computer test equipment to ensure full functionality and reliability.
Our sensors precisely track O.E. output curves and maintain spec tolerances to ensure accurate feedback to the vehicle┐s engine control management system.
Components are rated to handle demanding temperature variations for optimum reliability in every environment.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$75.99

CARDONE Diesel Fuel Injector Kits conveniently contain all components needed to complete the entire job, while other suppliers sell each component individually. Each kit includes everything required for installation, ensuring leak free operation and reduced crank times due to fuel leaks. Each kit contains 100% new components, ensuring trouble-free installation, keeping both you and your vehicle on the road for many years to come.

Product Features:

All in one kit makes the installation job easier and faster, as these components are typically sold separately from O.E.M. suppliers
Each installation kit includes everything required (gaskets, O-rings, sealing washers, etc.) for proper installation
Guaranteed fit and function
Meets or exceeds O.E.M. performance

from

$8.49

Complete injector seal kit includes all necessary components to properly reseal injector when installed. All parts in kit are manufactured using premium OE quality materials.

Product Features:

Premium OE quality materials
Includes injector body o-ring
Includes copper combustion seal
Includes fuel return line clip

Top-Rated Fuel and Emissions Systems Brands For Your 2009 GMC C4500 Topkick

Shop for the best-rated brands offering Fuel and Emissions Systems and other products for your 2009 GMC C4500 Topkicks. Below you’ll find some of our best rated Fuel and Emissions Systems from Carquest Premium and Delphi, and more. Fuel and Emissions Systems from these brands that fit a 2009 C4500 Topkick start at just $6.99 and are rated as high as 4 stars. OEM and aftermarket Fuel and Emissions Systems don’t get more top quality, durable, and affordable than from the brands below.

Popular Carquest Premium 2009 GMC C4500 Topkick Fuel and Emissions Systems

When it comes to maintaining or upgrading your 2009 GMC C4500 Topkick, using quality Fuel and Emissions Systems is essential to ensure durability and a perfect fit. Carquest Premium ticks all of those boxes. We offer a wide selection of Carquest Premium Fuel and Emissions Systems, specifically designed for the 2009 GMC C4500 Topkick. With over 32 Carquest Premium brand Fuel and Emissions Systems in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.99, with an average price of just $111.83. Plus, with over 403 customer reviews and an average rating of 4 stars, you can trust that our Carquest Premium Fuel and Emissions Systems will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$41.99

This product is not rated

Fuel Injector Connector

“”

from
$10.99

This product is not rated

Keyed Alike Locking Fuel Cap

“”

from
$19.99

This product is not rated

Multi Purpose Relay

“”

Popular Delphi 2009 GMC C4500 Topkick Fuel and Emissions Systems

Delphi auto parts is one of the highest quality Fuel and Emissions System brands in the market. Any 2009 GMC C4500 Topkick owner should feel confident when installing genuine Delphi parts in their vehicle. To ensure the best fit and performance for your 2009 C4500 Topkick, Advance Auto Parts carries a full inventory of 1 Delphi Fuel and Emissions Systems. Plus you will be keeping your GMC in peak condition while saving money because prices on these Delphi Fuel and Emissions Systems range up to $129.99, plus, with more than 21 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Fuel and Emissions Systems below will deliver on both quality and value.

from
$129.99

(21)

Mass Air Flow Sensor

“Fit correctly and worked fine.”

FAQs for 2009 GMC C4500 Topkick Fuel and Emissions Systems

Which Fuel and Emissions Systems are best-sellers for 2009 GMC C4500 Topkicks?

Out of 54 Fuel and Emissions Systems that fit 2009 GMC C4500 Topkicks, the following parts are the top sellers:

Fuel Cap: 10837, Round, Direct Fit, Provides Tight Seal, 1 Pack (18481528) – $14.99
Tethered Gas Cap: Non-Locking, Original Equipment Manufacturer, Reduces Air Pollution, 1 Pack (12102600) – $23.99
Mass Air Flow Sensor (MAF) – 100% NEW (11887172) – $89.99

What’s the price range for 2009 GMC C4500 Topkick Fuel and Emissions Systems?

Fuel and Emissions System prices for the 2009 GMC C4500 Topkick start at $3.99 and go up to $1,409.99 for the most premium parts.

What’s the average price of a Fuel and Emissions System for a 2009 GMC C4500 Topkick?

The average price for Fuel and Emissions Systems for the 2009 GMC C4500 Topkick is $202.87. Keep in mind the variety of part types within our Fuel and Emissions System category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Fuel and Emissions Systems for other GMC C4500 Topkick model years?

Yes, we currently carry Fuel and Emissions Systems for 6 model years of GMC C4500 Topkicks between 2003 and 2008. Fuel and Emissions Systems are bought most frequently for the following model years: 2008, 2007, 2006, 2005, 2004, and 2003.

What are the cheapest Fuel and Emissions Systems for my 2009 GMC C4500 Topkick?

The cheapest 2009 GMC C4500 Topkick Fuel and Emissions Systems we carry in stock are:

Diesel Fuel Filter Bleeder Screw – Nylon (Sold by each) (10098426) – $3.99
Chrysler, GM Push Rivet (11910661) – $4.49
Keyed Alike Locking Fuel Cap (10069213) – $6.99
Fuel Injector Seal Kit (11965231) – $8.49
Keyed Alike Locking Fuel Cap (10069222) – $10.99

What are the top-rated Fuel and Emissions Systems that fit the 2009 GMC C4500 Topkick?

Out of 2,717 reviews by customers, our 2009 GMC C4500 Topkick Fuel and Emissions Systems have an average customer rating of . These are some of the highest-rated Fuel and Emissions System types for the 2009 GMC C4500 Topkick and their top-rated products:

Diesel Fuel Injectors
- Diesel Fuel Filter Bleeder Screw – Nylon (Sold by each) (10098426) – $3.99
Air Flow Sensors
- Diesel Fuel Filter Bleeder Screw – Nylon (Sold by each) (10098426) – $3.99

What types of Fuel and Emissions Systems do you sell for my 2009 GMC C4500 Topkick?

As of 2/5/25, these are some of the most in-demand types of Fuel and Emissions Systems for a 2009 GMC C4500 Topkick:

Can I get help with 2009 GMC C4500 Topkick Fuel and Emissions System orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about GMC Fuel and Emissions Systems and more.

What is your return policy for GMC C4500 Topkick Fuel and Emissions Systems?

Advance Auto Parts keeps returns simple. For new GMC C4500 Topkick Fuel and Emissions Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2009 GMC C4500 Topkick Fuel and Emissions Systems

Carquest Premium – Manifold Absolute Pressure Sensor (MAP) (Part No.ECC1082)

Carquest Premium – Exhaust Gas Recirculation (EGR) Vacuum Regulator Solenoid Connector (Part No.PTA1107)

Carquest Premium – Fuel Injection Pressure Sensor (Part No.FPA1033)

Dorman – Exhaust Gas Recirculation Cooler Kit (Part No.904-121)

Dorman – Help – Vacuum Storage Canister (Part No.47083)

Dorman – Fuel Control Actuator (Part No.904-575)

Carquest Premium – Fuel Level Sensor (Part No.KBE1236)

Carquest Premium – Vapor Canister Purge Solenoid (Part No.CPA2444)

Carquest Premium – Fuel Cap Tester Adapter (Part No.12410)

Carquest Premium – Remanufactured Diesel Fuel Injector (Part No.AD25023)

Dorman – Fuel Injector O-Ring Kit (Part No.904-133)

Carquest Premium – Multi Purpose Relay (Part No.RAA1237)

Dorman – Electric Vacuum Pump (Part No.904-824)

Dorman – Chrysler, GM Push Rivet (Part No.961-359D)

NTK – Multi-Purpose Temperature Sensor (Part No.EF0008)

Carquest Premium – Inline Connector (Part No.PTA1847)

NTK – Water in Fuel (Wife) Sensor (Part No.WB0012)

Driveworks – MAP Sensor (Part No.31424)

Carquest Premium – Exhaust Gas Recirculation (EGR) Valve Motor Connector (Part No.PTA1869)

Carquest Premium – Fuel Injector Return Hose Kit (Part No.AL004)

Carquest Premium – Fuel Injector Connector (Part No.PTA1096)

Carquest Premium – Oxygen Sensor Connector (Part No.PTA2022)

Carquest Premium – Exhaust Gas Recirculation (EGR) Valve (Part No.EGG1156)

Dorman – Diesel Fuel Filter Bleeder Screw – Brass (sold by each) (Part No.904-112HP)

Carquest Premium – Remanufactured Diesel High Pressure Fuel Pump (Part No.AM91053)

Cardone – Remanufactured Mass Air Flow Sensor (Part No.74-8411)

Carquest Premium – Diesel Fuel Cap: 10830D, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10830D)

Motorad – Tethered Gas Cap: Non-Locking, Original Equipment Manufacturer, Reduces Air Pollution, 1 Pack (Part No.MGC817T)

Carquest Premium – Oxygen Sensor Connector (Part No.PTA1685)

Driveworks – MAP Sensor (Part No.31424)

NTK – Multi-Purpose Temperature Sensor (Part No.EF0008)

NTK – Manifold Absolute Pressure Sensor (Part No.MA0097)

Carquest Premium – Manifold Absolute Pressure Sensor (MAP) (Part No.ECC1082)

Carquest Premium – Exhaust Gas Recirculation (EGR) Vacuum Regulator Solenoid Connector (Part No.PTA1107)

ACDelco – Manifold Absolute Pressure (MAP) Sensor (Part No.213-4434)

Carquest Premium – Air Charge Temperature Sensor (Part No.WTA1175)

Cardone – Fuel Injection Pump (Part No.2H-113)

Carquest Premium – Remanufactured Diesel High Pressure Fuel Pump (Part No.AM91053)

Dorman – Remanufactured Common Rail Fuel Pump (Part No.502-554)

Carquest Premium – Fuel Cap Tester Adapter (Part No.12427)

Carquest Premium – Fuel Cap Tester Adapter (Part No.12410)

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17591)

Carquest Premium – Fuel Cap: 10837, Round, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10837)

Carquest Premium – Fuel Cap: 10834, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10834)

Carquest Premium – Gas Cap: Twist On, Reduces Air Pollution, 1 Pack (Part No.10817)

Carquest Premium – Locking Fuel Cap: 10501, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10501)

Carquest Premium – Fuel Cap: 10819, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10819)

Carquest Premium – Locking Fuel Cap (Part No.10591)

Carquest Premium – Locking Fuel Cap: 10504, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10504)

Carquest Premium – Locking Fuel Cap: 10507, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10507)

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17504)

Motorad – Tethered Gas Cap: Non-Locking, Original Equipment Manufacturer, Reduces Air Pollution, 1 Pack (Part No.MGC817T)

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17507)

Delphi – Mass Air Flow Sensor (Part No.AF10043)

Carquest Premium – Mass Air Flow Sensor (MAF) – 100% NEW (Part No.MQ7202)

Carquest Premium – Fuel Injector Connector (Part No.PTA1096)

Carquest Premium – Fuel Injector Return Hose Kit (Part No.AL004)

Carquest Premium – Remanufactured Diesel Fuel Injector (Part No.AD25043)

Carquest – Fuel Injection Pressure Regulator (Part No.24152)

Cardone – Fuel Injector (Part No.2J-109)

Wells Vehicle Electronics – Fuel Injection Pressure Regulator (Part No.5G1507)

Dorman – Remanufactured Diesel Fuel Injector (Part No.502-516)

Cardone – Remanufactured Mass Air Flow Sensor (Part No.74-8411)

Cardone – Fuel Injector Installation Kit (Part No.2K-104)

Carquest Premium – Fuel Injector Seal Kit (Part No.AC20522)