2009 Cadillac Escalade Towing Products

A CURT front trailer hitch allows you to use the front end of your vehicle for a variety of towing applications. They can be used for mounting a winch, a snow plow, a number of towing accessories and can even be used for some trailering applications. When space is limited, a front trailer hitch is commonly used to hold a cargo carrier, freeing up space inside the vehicle for extra cargo and making the rear mount receiver available to pull a trailer. At the boat ramp, your boat trailer can be hitched up to the front receiver hitch, giving you better control over the trailer as you launch. Some of the other accessories that can be used with a front tow hitch are the CURT winch mount, step pad, license plate holder, spare tire mount, skid shield and tow hooks. All CURT front trailer hitches provide a useful receiver tube to accept a 2″ x 2″ shank, and they are commonly used on trucks, vans and SUVs. This front trailer hitch is rated for 5,000 lbs. GTW and 500 lbs. TW. It also has a straight-line pull rating of 9,000 lbs. It is designed to be a custom trailer hitch for certain years of the Cadillac Escalade, Chevy Avalanche, Silverado 1500, Suburban 1500 or Tahoe and GMC Sierra 1500 or Yukon (to verify your vehicle compatibility, see application info). It comes with all necessary hardware for a complete installation and is backed by a limited lifetime warranty.

Product Features:

• Rated to 5,000 lbs. gross trailer weight and 500 lbs. tongue weight
• Compatible with a tow hook or shackle mount (9,000 lbs. straight-line pull)
• Engineered with a vehicle-specific design for a custom fit
• Provides a convenient mount for hitch accessories
• Ideal for attaching a snow plow, cargo carrier or other front hitch mount
• Allows for easy maneuvering of a trailer into a tight spot
• Concealed main body for OE look and seamless integration with the vehicle
• Tested for safety in accordance with SAE J684
• Precisely welded for superior strength and fit
• Protected by a durable black powder coat finish
• Co-cured in a rust-resistant liquid A-coat, inside and out
• Equipped with an open-back receiver for easy cleaning

Whatever your task at hand — whether it’s launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close — CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Cadillac Escalade, Chevy Blazer, Chevy Suburban, Chevy Tahoe, GMC Suburban and GMC Yukon (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 5,000 lbs. GTW and 500 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 6,000 lbs. WD and 600 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2″ receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.

Product Features:

• Rated to 5,000 lbs. gross trailer weight and 500 lbs. tongue weight
• Compatible with weight distribution hitch (6,000 lbs. WD / 600 lbs. WDTW)
• Engineered with a vehicle-specific design for a custom fit
• Tested for safety in accordance with SAE J684
• Precisely welded for superior strength and fit
• Protected by a durable high-gloss black powder coat finish
• Co-cured in a rust-resistant liquid A-coat, inside and out
• Equipped with an open-back receiver for easy cleaning
• Made in USA (may include imported hardware)

Original Equipment Manufacturer Style Replacement Side View Towing Mirror. K Source is a unique manufacturer in that we specialize in making only automotive and motorcycle mirrors. Our experience in this category for over 71 years is exactly what our customers have come to trust and rely upon, as our manufacturing and marketing expertise has consistently led the market in replacement products.

Product Features:

• Passenger side Mirror, tested to fit and function like the original, Meets or exceeds Original Equipment Manufacturer standards
• Mirror glass is power adjustable and heated
• OE-comparable wiring harness/ connection (no “pigtail” connector) for hassle-free installation
• Manual folding for additional clearance
• Textured Black

Original Equipment Manufacturer Style Replacement Side View Towing Mirror. K Source is a unique manufacturer in that we specialize in making only automotive and motorcycle mirrors. Our experience in this category for over 71 years is exactly what our customers have come to trust and rely upon, as our manufacturing and marketing expertise has consistently led the market in replacement products.

Product Features:

• Driver side Mirror, tested to fit and function like the original, Meets or exceeds Original Equipment Manufacturer standards
• Mirror glass to be adjusted by hand
• Manual folding for additional clearance
• Textured Black
• Superior material and manufacturing process ensures the highest quality possible

Husky Towing Products offers a complete line of hitches, brake assemblies, jacks, sway control solutions, and essential towing accessories. Each Husky product is precision engineered, constructed with durable, quality materials, and is rigorously tested to industry safety standards. Hitches are what Husky does best. From Class III receivers, to 5th wheels, to weight distribution hitches, Husky hitches help keep your towables safe and secure. Husky also offers accessories to accompany your hitch including hitch balls, shanks, locks, and more Electric tongue jacks, electrical and brake products, and cargo carriers are just a few other categories that make any towing experience easier.

Product Features:

• Husky Branded Replacement Parts Ensure Proper Fit And Function
• Weatherproof Design
• Constructed with durable, quality materials, and is rigorously tested to industry safety standards
• Easy to install

A CURT custom wiring connector (sometimes called a T-connector) is a simple, plug-and-play electrical device that eliminates the need for cutting, splicing and soldering when installing vehicle-to-trailer wiring. Most vehicles do not come ready to tow. Unless your vehicle has a towing package, it is probably not equipped with a trailer wiring connector. This is where CURT’s custom wiring connectors come into play. A custom wiring connector uses a single original equipment plug to plug into a special socket provided by your vehicle. Though this option is not available on every vehicle, some automotive manufacturers design their vehicles to be easily equipped for towing by supplying a socket, integrated into the vehicle’s electrical system, to readily accept a custom wiring connector. With a CURT custom wiring connector, there is no need to tap into the taillight assembly because a special socket is already provided. This special custom wiring connector actually provides two connector sockets for a multipurpose option. It plugs into an OEM connector and offers a 4-way flat and 7-way RV blade connector. It comes with a mounting bracket for easy installation and is designed to be a custom wiring option for a variety of vehicles (see application info to verify fitment). CURT custom wiring connectors are designed to be long-lasting and simple to install. They come with dust covers to keep your connector clean when not in use.

Product Features:

• Plugs into USCAR socket to provide 4-way and 7-way trailer wiring connectors
• Fits USCAR-equipped vehicles with factory tow plugs only
• Simple plug-and-play design eliminates the need for cutting or splicing
• 4-way flat output connects tail lights, brake lights and turn signals
• 7-way RV blade socket adds reverse lights, electric brakes and auxiliary power
• Dust covers included to keep connectors clean when not in use
• Slit loom keeps wires contained and well protected
• Metal bracket securely mounts wiring to the vehicle or trailer hitch

GM Genuine Parts Trailer Brake Controls are designed, engineered, and tested to rigorous standards, and are backed by General Motors. the brake controls signal a trailer’s brake system when the driver presses on the brake pedal and adjusts how much braking power is needed to stop the trailer. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

• Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
• GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
• GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
• GM regularly updates production and service part designs to integrate new materials and technologies

The 47284 brake control utilizes time based actuation for applying braking power to the trailer brakes. The built-in digital display makes it easy for setting braking intensity. The braking force to the trailer can easily be adjusted from 5% to 99% for setting the exact percentage of brake power desired. Most states and provinces require a trailer brake controller based on the weight of the trailer.

Product Features:

• Time-based braking
• Mounts at any angle
• Percentage of braking power shown
• Plug In Simple Feature
• Intuitive vertical manual slide
• Short Proof Protected
• Controls up to 4 trailer brakes

Reduce your installation time to minutes! Many of today’s tow vehicles come with an O.E.M. connector or harness wires under the dash. The 47685 simply splices onto the tow vehicle tow package supplied wires and then plugs into the Hopkins brake control to complete the install.

Product Features:

• Blunt cut wires allows for installation of any brake control
• 36 inch wire length
• For vehicles with a factory tow package
• Includes Step-By-Step Instructions And Diagrams

When the original trailer brake control module circuit board fails on certain General Motors vehicles, the dealer solution is to replace the entire trailer brake control module assembly. This Dorman OE FIX circuit board allows the direct replacement of only the failed circuit board, saving significant repair expense.

Product Features:

• Trailer Brake Control Switch – Circuit Board
• Trailer Brake Control Switch – Circuit Board – OE Fix
• Saves money – this direct-replacement trailer brake control module circuit board reduces repair cost by eliminating the need to replace entire failed module assembly
• Seamless installation – designed to precise specifications for an exact fit and performance that matches the original equipment circuit board

GM Genuine Parts Trailer Brake Control Modules are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

• This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
• Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
• GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
• GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
• GM regularly updates production and service part designs to integrate new materials and technologies

When the original trailer brake control module circuit board fails on certain General Motors trucks, you usually have to replace the entire module. This Dorman OE FIX circuit board allows direct replacement of only the failed board, saving money.

Product Features:

• Trailer Brake Control Switch – Circuit Board
• Trailer Brake Control Switch – Circuit Board
• When the original trailer brake control module circuit board fails on certain General Motors trucks, you usually have to replace the entire module. This Dorman OE FIX circuit board allows direct replacement of only the failed board, saving money.
• Simplified replacement – this trailer brake control switch circuit board directly replaces a burnt out module circuit board
• Saves money – this unique solution reduces repair cost by eliminating need to replace entire module

Stress is the last thing you should feel when towing a trailer — whether you’re hauling your RV to that favorite camping destination, your ATVs up to the hunting grounds or your fishing boat to the new hidden hotspot. At CURT, we think your towing equipment should add to the enjoyment of your experience, not detract from it. CURT custom wiring connectors are the easiest way to outfit your vehicle with a CURT trailer wiring connection. They are built with some of the most advanced technology in the industry, and each one is custom-fitted to work with a specific make and model. Some automotive manufacturers install a special socket on the vehicle to be used for vehicle-to-trailer wiring. Though this special socket is not equipped on every vehicle, a CURT custom wiring connector (also called a T-connector) utilizes the socket for simple, stress-free installation. Rather than requiring you to cut, splice and solder into your vehicle’s wiring system, the custom wiring connector uses a single OEM-compatible plug and instantly provides a standard vehicle-to-trailer wiring connection, typically in the form a 4-way flat. All CURT custom wiring connectors are made vehicle-specific for the easiest possible installation and the best fit. This particular connector provides a 4-way flat socket while retaining use of the existing OEM socket. It is designed to be a custom wiring option for a variety of vehicles (see application info to verify fitment with your vehicle). It comes with a dust cover to keep the connector socket clean when not in use.

Product Features:

• Plugs into USCAR connection to add 4-way flat and retain use of existing socket
• Simple plug-and-play design eliminates the need for cutting or splicing
• 4-way flat output connects tail lights, brake lights and turn signals
• Dust cover included to keep connector clean when not in use
• Slit loom keeps wires contained and well protected

Like trailer hitches and ball mounts, electrical connectors range all over the board in shape, size and capability, but no matter what your trailer’s electrical functions are, you need a solid connection to keep the power flowing and ensure safety on the road. CURT electrical connectors are designed and manufactured to give you a reliable connection every time you plug in your trailer. This 7-way RV blade connector is designed to plug into a USCAR socket and supply power for tail lights, turn signals, electric trailer brakes, a 12-volt battery, reverse lights and brake lights, as well as a ground connection. It is intended to be a replacement trailer connector, plugging into a standard USCAR socket (see application info to verify fitment with your vehicle). It features rust-free black plastic construction and comes with a spring-loaded cover to keep out dust and water. This 7-way RV blade connector is a female-end socket, specifically designed for the vehicle side of the connection.

Product Features:

• Plugs into USCAR socket to provide 7-way RV blade trailer wiring connector
• Simple plug-and-play design eliminates the need for cutting or splicing
• 7-way connects tail, brake, reverse, turn signals, brakes and auxiliary power
• Spring-loaded dust cover keeps connector clean when not in use

By incorporating Endurance design features that include oversized hinges, internal grommets for enhanced weather proofing and a lid that opens 180 degrees, this connector is guaranteed to last for years of trouble free use. Multi-Tow® design feature adds multiple towing options from one connector by providing sockets for towing both 7 blade and 4 flat trailers. This connector is Plug-In Simple!® with no cutting or splicing, saving you time by utilizing an OEM connector to create an exact fit for easy installation and maximum weatherproofing. Four hole mount installation for standard mounting brackets.

Product Features:

• Endurance Professional Grade
• Plug-In Simple!® Wiring Kit
• Utilizes OEM connectors create an exact fit and maximum weatherproofing
• Multi-Tow® provides multiple towing options from one connector
• Weatherproof lid opens 180 degrees
• Oversized hinge offers ultimate durability
• Superior Ergonomics
• For Use w/Factory Tow Package
• Impact And Corrosion Resistant

One Key Technology Allows You To Use Your Ignition Key Eliminating Need For Extra Keys.

One Key Technology Allows You To Use Your Ignition Key Eliminating Need For Extra Keys.

This trailer hitch plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

• Direct replacement – this trailer hitch plug matches the fit and function of the factory part on specified years, makes and models
• Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

GM Genuine Parts Trailer Tow Relays are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These relays function as an electro-mechanical switch containing a coil and set of connection points. These trailer tow relays provide a variety of control functions for a vehicle’s trailer brake system. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

• Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
• GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
• GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
• GM regularly updates production and service part designs to integrate new materials and technologies

New Standard Replacement Rear Bumper Tow Hitch Hole Cover, For Denali And LTZ Models

Product Features:

• For Denali And LTZ Models, Made Of Plastic
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle