2009 BMW 335D Vehicle Hoods

Essential 2009 BMW 335D Vehicle Hoods

aFe POWER – Dynamic Air Scoop (Part No.54-11478-R)

Dynamic Air Scoop

from

$146.99
Dynamic air scoops are constructed out of lightweight black powder coated aluminum and simply install behind the kidney bean grille. Increased air velocity and flow improves performance and throttle response.

Product Features:
  • Lightweight For Strength and Styling
  • Directs Frontal Air Into Intake System For Max. Performance
  • No Cutting Or Drilling On OEM Parts
  • Fast Installation
See More

aFe POWER – Dynamic Air Scoop (Part No.54-11478)

Dynamic Air Scoop

from

$125.99
Dynamic air scoops are constructed out of lightweight black powder coated aluminum and simply install behind the kidney bean grille. Increased air velocity and flow improves performance and throttle response.

Product Features:
  • Lightweight For Strength and Styling
  • Directs Frontal Air Into Intake System For Max. Performance
  • No Cutting Or Drilling On OEM Parts
  • Fast Installation
See More

Stabilus – Gas Charged Trunk Strut (Part No.O2064378552STB)

Gas Charged Trunk Strut

from

$43.03
STABILUS gas-charged lift supports make it easy and safe to raise and lower heavy hoods, rear hatches and tailgates by hand. Compact design, high functional comfort and integrated operating safety expand the range of applications for STABILUS products in utility vehicle design. As the world’s leading manufacturer of lift supports, STABILUS can provide exact replacements for practically any application where a lift support is used.

Product Features:
  • Restores the original opening and closing speeds of your hood, hatch or trunk
  • Easy-to-install
  • No special tools required
  • Engineered for your application
  • Easy lifting and reduced closing effort
  • Consistent lifting force through 50,000 cycles
  • Rust-resistant piston rod extends product life
  • Dynamic damping technology, available on select lift supports
See More

StrongArm – Trunk Lift Support: 14.5" Ext Length, 4.0" Travel, 78 Lbs of Force, 1 Pk (Part No.E6651)

Trunk Lift Support: 14.5" Ext Length, 4.0" Travel, 78 Lbs of Force, 1 Pk

from

$26.99
Lift supports are pressurized cylinders that are used to support hoods, hatches and rear window glass in automotive applications. Lift supports are also used in many non-automotive applications. Each Strongarm lift support is custom engineered, and manufactured beyond industry standards to provide smoother operating, and longer lasting performance. Lift supports should be replaced in pairs to ensure safe, reliable support of your hood, hatch, or liftgate.

Product Features:
  • Exact fit original equipment design guarantees correct fit and function
  • Engineered and built to meet or exceed original equipment quality standards
  • Individually tested for performance and reliability
  • Hardened, nitride plated steel shaft provides optimal durability
  • Rubber O-ring piston seal prevents leakage for a controlled lift and consistent performance
  • Heavy gauge steel body is electrostatically painted and heat cured to OE specs
  • Self-Cleaning Piston Assembly provides smooth operation and more reliable performance
  • Upper bushing is manufactured with quality precision providing exact fit and promotes longer operating life
  • No special installation tools required
  • Consistent Performance In All Weather Conditions
  • Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
  • Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle
See More

StrongArm – Hood Lift Support: 15.58" Ext Length, 5.75" Travel, 79 Lbs of Force, 1 Pk (Part No.E6650)

Hood Lift Support: 15.58" Ext Length, 5.75" Travel, 79 Lbs of Force, 1 Pk

from

$14.79
Lift supports are pressurized cylinders that are used to support hoods, hatches and rear window glass in automotive applications. Lift supports are also used in many non-automotive applications. Each Strongarm lift support is custom engineered, and manufactured beyond industry standards to provide smoother operating, and longer lasting performance. Lift supports should be replaced in pairs to ensure safe, reliable support of your hood, hatch, or liftgate.

Product Features:
  • Exact fit original equipment design guarantees correct fit and function
  • Engineered and built to meet or exceed original equipment quality standards
  • Individually tested for performance and reliability
  • Hardened, nitride plated steel shaft provides optimal durability
  • Rubber O-ring piston seal prevents leakage for a controlled lift and consistent performance
  • Heavy gauge steel body is electrostatically painted and heat cured to OE specs
  • Self-Cleaning Piston Assembly provides smooth operation and more reliable performance
  • Upper bushing is manufactured with quality precision providing exact fit and promotes longer operating life
  • No special installation tools required
  • Consistent Performance In All Weather Conditions
  • Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
  • Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle
See More

BBR Automotive – Hood Strut (Part No.O2020331176BBR)

Hood Strut

from

$31.66
Hood Strut

KAI – Hood Panel, Made Of Steel, For Sedan And Wagon Models (Part No.BM1230132V)

Hood Panel, Made Of Steel, For Sedan And Wagon Models

from

$524.99
New Economy Replacement Hood Panel, Sedan/Wagon Models

Product Features:
  • Sedan/Wagon Models, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Dorman – Hood Release Cable Assembly (Part No.912-462)

Hood Release Cable Assembly

from

$32.49
Hood release cable broken? This hood release cable is durably built to directly replace a worn-out or broken cable on specific vehicle years, makes and models.

Product Features:
  • Direct replacement – this hood release cable is made to match the original cable on specific vehicles
  • Durable construction -manufactured within strict tolerances for reliable longevity
  • Cost-effective solution – comparable quality for lower cost than buying replacement at the dealership
  • Trustworthy value – backed by team of engineers and quality control experts in the United States
See More

Dorman – Hood Release Cable Assembly (Part No.912-470)

Hood Release Cable Assembly

from

$23.29
Hood release cable broken? This hood release cable is durably built to directly replace a worn-out or broken cable on specific vehicle years, makes and models.

Product Features:
  • Direct replacement – this hood release cable is made to match the original cable on specific vehicles
  • Durable construction -manufactured within strict tolerances for reliable longevity
  • Cost-effective solution – comparable quality for lower cost than buying replacement at the dealership
  • Trustworthy value – backed by team of engineers and quality control experts in the United States
See More

2009 BMW 335D Vehicle Hoods

Maybe you’re in the middle of a full rebuild of that 2009 BMW 335D. Maybe you just need a couple of Vehicle Hoods. Either way, Advance Auto Parts has 9 different Vehicle Hoods in our inventory ranging from $14.79 to $524.99. That means you can find the exact parts or products you need to keep that 2009 BMW 335D running smoothly.

Vehicle Hoods are only as good as their brand. We stock 6 different brands to make sure you have plenty of trusted parts to choose from for your 2009 BMW 335D. StrongArm, Dorman, and KAI are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Vehicle Hoods for your 2009 BMW 335D, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Vehicle Hoods to keep your 2009 BMW 335D rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Vehicle Hoods Brands To Make Your 2009 BMW 335D Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2009 BMW 335D demands trusted brand parts and products to keep it running. Many trusted brands of Vehicle Hoods make up Advance Auto Parts’ inventory, and all are ready to help make your 335D the best it can be. Be sure to browse some of our top Vehicle Hoods brands and parts.

Popular Stabilus Vehicle Hoods

We carry Stabilus parts in our stock across Lift Supports categories, plus more. For a 2009 BMW 335D, our most popular Stabilus Vehicle Hoods include:
Gas Charged Trunk Strut
from $43.03
(1)
Gas Charged Trunk Strut
Lift Supports

FAQs for 2009 BMW 335D Vehicle Hoods

What are the most purchased Vehicle Hoods for the 2009 BMW 335D?

Out of 9 Vehicle Hoods for the 2009 BMW 335D, the most popular in our inventory are:
Hood Lift Support: 15.58" Ext Length, 5.75" Travel, 79 Lbs of Force, 1 Pk
from $14.79
This product is not rated
Hood Lift Support: 15.58" Ext Length, 5.75" Travel, 79 Lbs of Force, 1 Pk
Lift Supports
Hood Release Cable Assembly
from $23.29
This product is not rated
Hood Release Cable Assembly
Hood Release Cables