2009 BMW 128i Control Arms

Essential 2009 BMW 128i Control Arms

Dorman – Suspension Control Arm (Part No.524-207)

Suspension Control Arm

from

$182.99
This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment on specific vehicles
  • Reliable fit – precision-engineered to match the design and dimensions of original components
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Rein – Control Arm (Part No.SCA0198P)

Control Arm

from

$94.99
Worn suspension can cause loose steering, increased wear on tires, excess noise and lead to misalignments. Rein Automotive OE quality suspension parts are direct replacements for OE suspension parts and will reduce the wear on tires and reduce noise as well as tighten steering. Rein Automotive suspension parts come with the mounting hardware if required.
See More

Whiteline – Control Arm Lower Arm (Part No.KTA255)

Control Arm Lower Arm

from

$639.99
Whiteline KTA255 for the BMW 1 Series, 3 Series, X1 and Z4 is a set of 4 arms to solve any front end issues you may have. Due to the high performance of many BMW models, the original rubber front control arm and radius arm bushings tend to take a beating, and have a limited service life. In addition many owners will lower their BMW with a lowering kit or coilovers and may have a front end geometry issue that needs correcting. For ease of fitment these alloy arms also come complete with adjustable synthetic elastomer bushings. These facilitate +/- 0.5 deg camber and separately caster. These two key alignment angles can help ensure you get the car set up for minimal tyre wear with maximum grip. The bushings are designed with internal knurling to ensure a reservoir for long-term lubrication with the supplied, extreme pressure molybdenum disulphide (LM) based grease for extended life. High strength ball joints are included with the arms to make this a fit and forget purchase compared to the short service life of the original and cheaper aftermarket alternatives.

Product Features:
  • Engineered to alter/ optimise camber alignment to compensate for body roll, body distortion and tyre roll when cornering.
  • Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
  • Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
See More

MOOG – Suspension Control Arm (Part No.CK640190)

Suspension Control Arm

from

$72.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Easy to install
  • Restores like-new steering and handling
  • OE fit and form geometry and alignment
  • Construction and design validated by MOOG engineers
  • Broad coverage for foreign and domestic applications
See More

Dorman – Suspension Control Arm (Part No.522-131)

Suspension Control Arm

from

$65.99
This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment on specific vehicles
  • Reliable fit – precision-engineered to match the design and dimensions of original components
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Rare Parts – Control Arm (Part No.RP12135)

Control Arm

from

$112.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • OE replacement
  • Reduces vibration
  • Reduces tire wear
See More

Rein – Control Arm (Part No.SCA0281R)

Control Arm

from

$49.99
Worn suspension can cause loose steering, increased wear on tires, excess noise and lead to misalignments. Rein Automotive OE quality suspension parts are direct replacements for OE suspension parts and will reduce the wear on tires and reduce noise as well as tighten steering. Rein Automotive suspension parts come with the mounting hardware if required.
See More

Lemfoerder – OE Replacement Suspension Tension Strut (Part No.L2000664522LEM)

OE Replacement Suspension Tension Strut

from

$145.21
The Lemfoerder control arm is manufactured to exact OEM specifications providing original equipment quality, durability and performance.

Product Features:
  • OE-Equivalent and Direct fit for easy Installation.
  • Manufactured using high quality OE materials.
  • Includes factory specified hardware.
See More

Lemfoerder – OE Replacement Suspension Tension Strut (Part No.L2000664521LEM)

OE Replacement Suspension Tension Strut

from

$145.87
The Lemfoerder control arm is manufactured to exact OEM specifications providing original equipment quality, durability and performance.

Product Features:
  • OE-Equivalent and Direct fit for easy Installation.
  • Manufactured using high quality OE materials.
  • Includes factory specified hardware.
See More

Lemfoerder – OE Replacement Suspension Wishbone (Part No.L2000664556LEM)

OE Replacement Suspension Wishbone

from

$106.24
The Lemfoerder control arm is manufactured to exact OEM specifications providing original equipment quality, durability and performance.

Product Features:
  • OE-Equivalent and Direct fit for easy Installation.
  • Manufactured using high quality OE materials.
  • Includes factory specified hardware.
See More

Lemfoerder – Shock Mount (Part No.L4010335007LEM)

Shock Mount

from

$28.04
The Lemfoerder shock mount is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:
  • OE-Equivalent and direct fit application
  • OE style mounts and fasteners
  • Resistant to oil and other contaminants
  • Meets or exceeds OEM specifications
See More

Rein – Control Arm Bushing (Part No.AVB0537)

Control Arm Bushing

from

$17.99
Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts

Product Features:
  • All Rein Automotive control arm bushings are hydraulic or rubber-to-metal based on the original equipment mount, ensuring the parts performs like original.
  • Manufactured to strict engineering standards/specifications in materials and tolerances
  • Rubber components match the shore hardness of the original equipment bushing to ensure maximum performance and product longevity
  • Recommend to replace bushings in pairs to ensure best performance. Note: Control Arm Bushing Kits contain the needed pair.
See More

Whiteline – Control Arm Lower Bushing (Part No.KCA431)

Control Arm Lower Bushing

from

$115.99
Whiteline camber kits provide the ability to fine tune camber settings for optimum tyre contact resulting in improved vehicle handling and increased tyre life. This kit is supplied with dual offset Whiteline synthetic elastomer bushings with core characteristics ensuring superior elasticity, memory and outright durability which help maintain preferred alignment settings as well as providing enhanced steering response.

Product Features:
  • Engineered to alter/ optimise camber alignment to compensate for body roll, body distortion and tyre roll when cornering.
  • Featuring premium anodized alloy materials, Whiteline alloy products are anodized providing a long-lasting protective barrier to corrosion and wear but they look great too.
  • Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
See More

Whiteline – Control Arm Upper Rear Outer Bushing (Part No.W63402)

Control Arm Upper Rear Outer Bushing

from

$47.99
Suffering uneven tyre wear, unbalanced braking or a less predictable rear end while cornering. It could be your control arm bushings have failed. Replace these worn parts with Whiteline synthetic elastomer bushings that offer long lasting durability for a safer more predictable vehicle.

Product Features:
  • Install guide included providing detailed instructions on how to install your new Whiteline purchase.
  • Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
  • Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
See More

AST – Polyurethane Control Arm Bushing (Part No.L20302313742AST)

Polyurethane Control Arm Bushing

from

$48.44
Advanced Suspension Technology Control Arm Bushing offers a unique polyurethane alternative to conventional rubber suspension bushings. AST bushings are urethane-based and are impregnated with graphite to aid in lubrication and reduce noise. Polyurethane bushings are stronger and last longer than standard rubber bushings. Most modern production vehicles are designed using rubber bushings which have a limited lifespan. This contributes to suspension failure due to vehicular weight and the inherent design of high-tech suspensions. Typically this results in less than desirable vehicle handling and can cause many related parts to wear out more rapidly than necessary. Polyurethane corrects this problem and in many cases improves vehicle handling and drivability. Once removal of original bushings has taken place, installation of the new polyurethane bush typically takes from 1 – 5 minutes to install.

Product Features:
  • Unique polyurethane alternative
  • Sleeves in the bushings freely rotate which enhances longevity
  • Impregnated with graphite to aid in lubrication and reduce noise
  • Alternative to conventional rubber suspension bushings
See More

Whiteline – Control Arm Lower Bushing (Part No.W53453)

Control Arm Lower Bushing

from

$61.99
Worn front control arm bushings have a huge influence on vehicle stability, steering precision and braking efficiency. Replace worn bushings to as new condition utilising Whiteline’s advanced synthetic elastomer bushings with core characteristics ensuring superior elasticity, memory and outright durability for all forms of driving applications.

Product Features:
  • Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
  • Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
  • Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
See More

Rein – Control Arm Bushing (Part No.AVB0443)

Control Arm Bushing

from

$34.99
Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts

Product Features:
  • All Rein Automotive control arm bushings are hydraulic or rubber-to-metal based on the original equipment mount, ensuring the parts performs like original.
  • Manufactured to strict engineering standards/specifications in materials and tolerances
  • Rubber components match the shore hardness of the original equipment bushing to ensure maximum performance and product longevity
  • Recommend to replace bushings in pairs to ensure best performance. Note: Control Arm Bushing Kits contain the needed pair.
See More

Whiteline – Radius Arm Lower Bushing (Part No.KCA430)

Radius Arm Lower Bushing

from

$114.99
Whiteline caster kits are designed to improve cornering grip and vehicle straight line stability. This kit is supplied with dual offset bushings to give greater steering feel, more steering weight, greater precision all through increased static caster and dynamic negative camber gain. In addition, Whiteline bushings provide improved braking performance, and less under load alignment change.

Product Features:
  • Engineered to alter/ optimise caster alignment to maximize tyre contact patch during roll, improve turn-in response & increase directional stability.
  • Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
  • Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
See More

Rein – Bushing (Part No.AVB0591)

Bushing

from

$7.99
Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein automotive anti-vibration parts are application specific and match the design and function of the OE parts.

Product Features:
  • All Rein automotive bushings are hydraulic or rubber-to-metal based on the original equipment mount, ensuring the parts performs like original.
  • Manufactured to strict engineering standards/specifications in materials and tolerances
  • Rubber components match the shore hardness of the original equipment bushing to ensure maximum performance and product longevity
  • Recommend to replace bushings in pairs to ensure best performance. note: control arm bushing kits contain the needed pair.
See More

Whiteline – Control Arm Lower Front Inner Bushing (Part No.W63401)

Control Arm Lower Front Inner Bushing

from

$54.99
Suffering uneven tyre wear, unbalanced braking or a less predictable rear end while cornering. It could be your control arm bushings have failed. Replace these worn parts with Whiteline synthetic elastomer bushings that offer long lasting durability for a safer more predictable vehicle.

Product Features:
  • Internal grease reservoirs provide continual self lubrication for optimum friction management.
  • Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
  • Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
  • Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
See More

Lemfoerder – Control Arm Bushing (Part No.L2030434713LEM)

Control Arm Bushing

from

$37.74
The Lemfoerder Control Arm Bushing is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:
  • OE-Equivalent and a direct fit application.
  • Meets or exceeds the OE specifications.
  • Designed to reduce vibration and absorb noise.
See More

Whiteline – Control Arm Upper Front Bushing (Part No.W63403)

Control Arm Upper Front Bushing

from

$73.99
Suffering uneven tyre wear, unbalanced braking or a less predictable rear end while cornering. It could be your control arm bushings have failed. Replace these worn parts with Whiteline synthetic elastomer bushings that offer long lasting durability for a safer more predictable vehicle.

Product Features:
  • Install guide included providing detailed instructions on how to install your new Whiteline purchase.
  • Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
  • Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
  • Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
See More

MOOG – Control Arm Bushing (Part No.K201291)

Control Arm Bushing

from

$31.99
Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
  • PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
  • OE-STYLE DESIGN — Engineered to match or exceed OE requirements
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • Bushings manufactured from high quality elastomer compounds for durability and ride performance
  • Assembled with proper precompression for ultimate in performance and feel
See More

Whiteline – Control-Arm-Lower-Bushing (Part No.W51990)

Control-Arm-Lower-Bushing

from

$104.99
Whiteline camber kits provide the ability to fine tune camber settings for optimum tyre contact resulting in improved vehicle handling and increased tyre life. This kit is supplied with dual offset Whiteline synthetic elastomer bushings with core characteristics ensuring superior elasticity, memory and outright durability which help maintain preferred alignment settings as well as providing enhanced steering response.

Product Features:
  • Designed with the installer in mind by reducing the need of specialised skills, tools and equipment.
  • Engineered to alter/ optimise camber alignment to compensate for body roll, body distortion and tyre roll when cornering.
  • Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
  • Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
See More

Rein – Control Arm Bushing Kit (Part No.AVB0442)

Control Arm Bushing Kit

from

$64.99
Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts

Product Features:
  • All Rein Automotive control arm bushings are hydraulic or rubber-to-metal based on the original equipment mount, ensuring the parts performs like original.
  • Manufactured to strict engineering standards/specifications in materials and tolerances
  • Rubber components match the shore hardness of the original equipment bushing to ensure maximum performance and product longevity
  • Recommend to replace bushings in pairs to ensure best performance. Note: Control Arm Bushing Kits contain the needed pair.
See More

Rare Parts – Control Arm Bush (Part No.RP15912)

Control Arm Bush

from

$49.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Reduces vibration
  • Torsional rubber bushings
  • UV resistant
  • No Squeak
See More

MOOG – Control Arm Bushing (Part No.K200089)

Control Arm Bushing

from

$47.49
Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
  • PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
  • OE-STYLE DESIGN — Engineered to match or exceed OE requirements
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • Bushings manufactured from high quality elastomer compounds for durability and ride performance
  • Assembled with proper precompression for ultimate in performance and feel
See More

Lemfoerder – Control Arm Bushing Kit (Part No.L2040233400LEM)

Control Arm Bushing Kit

from

$69.21
The Lemfoerder Control Arm Bushing Kit is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:
  • OE-Equivalent and a direct fit application.
  • Meets or exceeds the OE specifications.
  • Designed to reduce vibration and absorb noise.
  • Kit includes bushings and hardware – (SEE Note)
See More

2009 BMW 128i Control Arms

Maybe you’re in the middle of a full rebuild of that 2009 BMW 128i. Maybe you just need a couple of Control Arms. Either way, Advance Auto Parts has 36 different Control Arms in our inventory ranging from $7.99 to $639.99. That means you can find the exact parts or products you need to keep that 2009 BMW 128i running smoothly.

Control Arms are only as good as their brand. We stock 7 different brands to make sure you have plenty of trusted parts to choose from for your 2009 BMW 128i. Moog, Lemfoerder, and Dorman are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Control Arms for your 2009 BMW 128i, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Control Arms to keep your 2009 BMW 128i rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Control Arms Brands To Make Your 2009 BMW 128i Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2009 BMW 128i demands trusted brand parts and products to keep it running. Many trusted brands of Control Arms make up Advance Auto Parts’ inventory, and all are ready to help make your 128i the best it can be. Be sure to browse some of our top Control Arms brands and parts.

Popular MOOG Control Arms

We carry MOOG parts in our stock across Lower Control Arm Bushings categories, plus more. For a 2009 BMW 128i, our most popular MOOG Control Arms include:
Control Arm Bushing
from $47.49
(1)
Control Arm Bushing
Lower Control Arm Bushings

FAQs for 2009 BMW 128i Control Arms

What are the most purchased Control Arms for the 2009 BMW 128i?

Out of 36 Control Arms for the 2009 BMW 128i, the most popular in our inventory are:
Control Arm Bushing
from $31.99
This product is not rated
Control Arm Bushing
Lower Control Arm Bushings
Control Arm Bushing Kit
from $69.21
This product is not rated
Control Arm Bushing Kit
Lower Control Arm Bushings
Suspension Control Arm
from $182.99
This product is not rated
Suspension Control Arm
Lower Control Arms