2008 Volkswagen GTI Fuel and Emissions Systems

Name: Fuel Tank Cleaning Kit
Brand: Delphi
SKU: FC01
Price: 12.49 USD

Below you will find various in-demand Volkswagen Fuel and Emissions Systems, components and accessories for your 2008 GTI. Advance Auto Parts has popular GTI parts like Oxygen Sensors, Gas Caps, Air Flow Sensors and more. You’ll also find aftermarket and OEM Fuel and Emissions Systems for other GTI model years including 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 and more. Select a category of 2008 Volkswagen GTI Fuel and Emissions Systems below and start saving instantly.

Popular 2008 Volkswagen GTI Fuel and Emissions Systems Categories

Fuel Pump Driver Modules

Air- Fuel Ratio Sensors

Fuel Tank Cleaning Kits

Fuel Pressure Sensors

Air Flow Meters and Mass Air

Vapor Canister Purge Valves

Fuel Pump Pressure Switches

Fuel Injection Pressure Sensors

Fuel Vapor Leak Detection Pumps

MAP-Barometric Pressures

Smog Pumps

Canister Purge Solenoids

Direct Injection High Pressure Fuel Pumps

EGR Valves

Fuel Injectors

Pressure Regulators

Air Charge Temperature Sensors

Ambient Air Temperature Sensors

Fuel Injector O-Ring Kits

Fuel Injector Seal Kits

Fuel Injector Gaskets

Fuel Injection Relays

Diverter Valves

Vapor Canister Purge Valve Hoses

Fuel Pump Tappets

Crankcase Breather Hoses

Fuel Pump O-Rings

Fuel Injection Throttle Control Actuators

Air Pump Solenoids

Crankcase Breather Hose Connector O-Rings

Diesel Vacuum Pump Gaskets

Fuel Injector Seal Tool Set

Essential Fuel and Emissions Systems for 2008 Volkswagen GTIs

from

$12.49

When replacing a fuel pump or module, it’s extremely important to clean the tank. Existing dirt, debris, and contamination stuck in the fuel tank can clog the brand-new strainer. Delphi’s Fuel Tank Cleaning Kit (FC01) and Tool (FC02) can help clean your fuel tank in less than five minutes. The FC01 includes a low-suds solution, cloth, and gloves that works together with the FC02 to help clean those hard to reach places without having to remove the fuel tank. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Product Features:

Helps avoid premature fuel pump failure
Lint free towel included
Low suds formulation
Removes harmful contaminants from the fuel tank

from

$258.00

Intake Manifold Actuator

from

$15.36

Fuel Injector Repair

from

$73.46

Fuel Pressure Sensor

from

$44.52

Breather Hose

from

$55.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$124.99

CARQUEST MAF sensors are 100% new and are produced by a certified OEM supplier that designs and manufactures new mass air flow sensors

Product Features:

CARQUEST MAF use all new high-quality components at the highest quality standards.
Manufactured with new and advanced technology to perform, fit and function at OE specifications.
All new product that is tested with OEM equipment to OEM standards
Outperforms competition when tested in extreme environmental conditions

from

$2.60

Breather O-Ring

from

$371.11

Combi Valve

from

$199.99

This secondary air injection pump is designed to match the fit and function of the original pump on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this secondary air injection pump is designed to match the fit and function of the original pump on specified applications.
Restores functionality – reliable replacement for an original part that is leaking or has failed due to internal component failure.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$32.99

Bosch OE quality pressure sensors for accurate measurements with high durability, fast response time and wide measuring range.

from

$70.83

Fuel Pressure Sensor

from

$189.97

Secondary Air Inj. S

from

$148.99

from

$41.81

Fuel Pump Control Mo

from

$66.99

from

$21.99

Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:

Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$52.65

Air Temp. Sensor

from

$41.35

Fuel Pump Tappet

from

$144.99

NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. While conventional switching oxygen sensors only switch rich or lean, wideband oxygen (or Air-Fuel Ratio) sensors produce a linear output signal that allows the ECU determine exactly how rich or lean an engine is running and make continuous and precise adjustments of the air-fuel mixture to stay closest to stoichiometric, providing the best possible combustion and fewest emissions. A ceramics company at our core, NTK uses state-of-the art technology enabling complete control of the ceramics used in our wideband oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

from

$181.99

NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

from

$375.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$119.99

GDI SEAL TOOL KIT

from

$28.43

The high-performance TEV canister purge valve constructed of plastic complies with all the requirements of manifold injection and gasoline direct injection.

Product Features:

Favorable price-to-performance ratio
Optimized triggering when minimal amounts are detected, giving quiet idling
Steeper rise of characteristic line
High maximum flow Installation on engine generates less noise
Integrated protective sieve prevents accumulation of dirt
Compact and light
Quick and simple fitting

from

$193.60

Vapor Canister Purge

from

$6.29

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$3.29

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

Upgrade your 2008 Volkswagen GTI with Top-Quality Fuel and Emissions Systems

When it comes to maintaining or upgrading your 2008 Volkswagen GTI, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Volkswagen or enhancing its overall performance, Fuel and Emissions Systems are key to keeping your GTI functioning at its best. At Advance Auto Parts, we offer a wide selection of 95 Fuel and Emissions Systems for the 2008 Volkswagen GTI, designed to meet your needs without breaking the bank. From Oxygen Sensor replacements to Gas Caps upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Fuel and Emissions Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Fuel and Emissions Systems for your 2008 Volkswagen GTI at great prices. Our Fuel and Emissions Systems inventory for this model ranges from just $2.60 to $637.35, with an average price of $140.09. Our 95 Fuel and Emissions Systems in stock come from 26 trusted brands, so you’re sure to find the right part for your 2008 Volkswagen GTI without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2008 Volkswagen GTI, we stock popular OEM and aftermarket Fuel and Emissions Systems from top names like Bosch Dorman, and more. Bosch Fuel and Emissions Systems start at just $24.09 and boast an impressive 5 stars average rating from customers. With 502 customer reviews and counting, our 2008 Volkswagen GTI Fuel and Emissions Systems have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Fuel and Emissions System upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2008 Volkswagen GTI is always ready to roll. We’re committed to providing you with everything you need to keep your GTI in top shape, all in one place. Start shopping confidently below for your 2008 Volkswagen GTI!

Best-Selling Oxygen Sensors for 2008 Volkswagen GTIs

Enhance the driving experience in your Volkswagen with 14 quality Oxygen Sensor components, starting at $80.99.

show more show less

from

$148.99

Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.

Product Features:

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Direct Fit includes OE Connector for easy installation
Performance meets or exceeds OE specifications
True Direct-fit OE connectors and harness

from

$80.99

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Includes Smart Link Connector, no soldering required
No special tools required for installation
Seared protection tube due to 100% functional quality test
Performance meets or exceeds OE specifications

from

$179.99

Advanced Wideband sensing element for exact air/fuel measurement
Robust sensor design increases sensor longevity
Seared protection tube due to 100% functional quality test
True Direct-fit
Pre-coated threads with anti-seize compound right out of the box

from

$163.99

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Direct Fit includes OE Connector for easy installation
Performance meets or exceeds OE specifications
True Direct-fit OE connectors and harness

from

$137.99

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Direct Fit includes OE Connector for easy installation
Performance meets or exceeds OE specifications
True Direct-fit OE connectors and harness

from

$191.99

NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

from

$231.99

DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance. Each component is precision built for exact replacement, and a first time fit. This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity. DENSO gives you the right part and the right fit, the first time.

Product Features:

Specifically designed to meet the increasing demands of today’s engines
100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$168.91

Denso First Time Fit oxygen sensors are constructed of the highest quality materials available. High-quality stainless steel, porous polytetrafluoroethylene (PTFE), fluorine rubber, aluminum oxide, high-grade platinum and ceramics are used in each DENSO sensor.

Product Features:

SUPERIOR DESIGN – Maximizes engine performance and fuel efficiency while reducing harmful emissions.
DOUBLE-PROTECTION COVER – Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
ALUMINUM-OXIDE TRAP LAYER – Keeps silicone and lead outside the ceramic element through DENSO’s exclusive design, preventing damage to the platinum electrode.
STAINLESS STEEL HOUSING – Resists corrosion and contamination with a rugged, watertight body.

from

$167.99

Specifically designed to meet the increasing demands of today’s engines
100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$166.46

Oxygen Sensor

from

$159.99

NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

from

$140.20

The Bosch oxygen sensor utilizes a mix of zirconium and yttrium oxides and other elements to form a tough base that withstands the intense stress to which oxygen sensors are subjected. Each element is incredibly strong for best-in-class performance and maximum service life.

Product Features:

OE-Equivalent.
Direct fit for easy installation.
OE Style connectors and wire lengths.
Base ceramic probe of Zirconium and Yttrium.
Patented Platinum Power Grid.

from

$98.42

Oxygen Sensor

from

$95.40

Walker Oxygen Sensors are precision made for outstanding performance and manufactured to meet and exceed all original equipment specification and test requirements.

Product Features:

Improved Engine Response and Performance
Lower Emissions
Improved Fuel Economy
Longer Sensor Life
Meets OEM Specifications Installation Notes: Vehicles equipped with Air Fuel Ratio Sensors may look very similar to the Oxygen Sensor. Please confirm the correct part before ordering and if the connector does not match, do not install

Top Picks for 2008 Volkswagen GTI Air Flow Sensors

Upgrade Volkswagen GTIs with top-quality Air Flow Sensors parts, including 15 OEM and aftermarket selections for your 2008 model.

show more show less

from

$11.99

Electrical parts control all aspects of vehicles on the road today. Replacing these components when they are starting to fail will ensure your vehicle has maximum performance and fuel economy. This is why Rein Automotive electrical parts are application specific and match the design and function of the OE parts.

Product Features:

Tested to ensure maximum performance
Manufactured to strict engineering standards/specifications in materials and tolerances
Long life and durability
Made by the OE manufacturer

from

$269.38

Oxygen Sensor

from

$232.50

OE-Equivalent.
Direct fit for easy installation.
OE Style connectors and wire lengths.
Base ceramic probe of Zirconium and Yttrium.
Patented Platinum Power Grid.

from

$216.06

SUPERIOR DESIGN – Maximizes engine performance and fuel efficiency while reducing harmful emissions.
DOUBLE-PROTECTION COVER – Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
ALUMINUM-OXIDE TRAP LAYER – Keeps silicone and lead outside the ceramic element through DENSO’s exclusive design, preventing damage to the platinum electrode.
STAINLESS STEEL HOUSING – Resists corrosion and contamination with a rugged, watertight body.

from

$214.34

DENSO a global supplier to automakers manufactures an OE-equivalent direct fit air fuel ratio sensor that maintains the quality and performance of the Original Equipment it replaces. DENSO continues to innovate with the latest development in air fuel ratio sensors. These components, also known as wide-band oxygen sensors, have a broader response range to provide much finer control of air/fuel mixtures over a greater variety of operating conditions.

Product Features:

Tarnish-proof platinum electrodes provides longer life and maintains accuracy
Quick-response planar zirconia element can quickly detect oxygen concentration
Measures A/F ratios from approximately 12:1 to 19:1
Increased performance by mapping a/f ratios throughout rpm range
Reduces emissions by keeping the air-fuel mixture at an optimum ratio

from

$203.99

DENSO Air/Fuel Ratio Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance.; Each component is precision-built for exact replacement+ and a first time fit.; DENSO gives you the right part and the right fit+ the first time.

Product Features:

Specifically designed to meet the increasing demands of today’s engines
100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$198.99

Specifically designed to meet the increasing demands of today’s engines
100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$145.99

OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

from

$106.33

Walker Oxygen Sensors are precision made for outstanding performance and manufactured to meet and exceed all original equipment specification and test requirements.

Product Features:

Improved Engine Response and Performance
Lower Emissions
Improved Fuel Economy
Longer Sensor Life
Meets OEM Specifications Installation Notes: Vehicles equipped with Air Fuel Ratio Sensors may look very similar to the Oxygen Sensor. Please confirm the correct part before ordering and if the connector does not match, do not install

from

$95.90

OE-Equivalent.
Direct fit for easy installation.
OE Style connectors and wire lengths.
Base ceramic probe of Zirconium and Yttrium.
Patented Platinum Power Grid.
Fine particle filter. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance. Installation Notes: Vehicles equipped with Air Fuel Ratio Sensors may look very similar to the Oxygen Sensor. Please confirm the correct part before ordering and if the connector does not match, do not install.

from

$64.99

from

$55.99

from

$52.65

Air Temp. Sensor

from

$32.99

Bosch OE quality pressure sensors for accurate measurements with high durability, fast response time and wide measuring range.

from

$32.99

The temperature of various systems must be reported to the engine control module (ECM) as well as other operating system controllers in the vehicle. Coolant temperature, cabin temperature, exhaust temperature and ambient temperature are just a few systems reported by a temperature sensor. The temperature sensor is fed 5 volts by the systems computer, within the sensor housing will be a thermistor, or dropping resistor whose resistance value will change as the temperature surrounding it changes. Changing resistance in the circuit will change the volt signal at the processor indicating the current operating value.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Application matched components ensures system operation in like new condition.

In-Demand Fuel Pumps for 2008 Volkswagen GTIs

Select from 17 premium Fuel Pumps parts for your 2008 Volkswagen GTI, with prices ranging from $3.99 to $637.35.

show more show less

from

$140.99

This fuel pump driver module is a direct replacement for the original equipment module. Designed to match the original fit and function, it features a plug & play connection for an easy installation.

Product Features:

Direct replacement – this fuel pump driver module matches the fit and function of the original equipment module to restore vehicle operation.
Plug and play installation – this fuel pump driver requires no modifications or special tools to install.
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Quality tested – vehicle simulation tested to ensure performance

from

$459.99

Hitachi’s High Pressure Fuel Pumps (HPPs) are designed to enhance fuel volume delivery for exceptional operation and faster vehicle response. Our HPPs are a good alternative to the standard fuel pump for direct injection, supercharged, and turbocharged applications commonly found in todays vehicles. Pump housing is made of high strength aluminum to ensure durability while keeping weight low. Precision machined surfaces prevent fuel leakage/pressure drop while chemical resistant seals prevent premature wear from ethanol mixed fuels. Designed to meet the exact needs of each specific vehicle, Hitachi’s High Pressure Fuel Pumps are the premium choice. Hitachi is a Tier One OE supplier to the largest automobile manufacturers globally, delivering industry leading quality, and exceeding customer expectations with our products and service. Hitachi is bringing that same knowledge and expertise to the premium products we deliver in the Aftermarket because Quality Matters.

Product Features:

These quality High Pressure Pumps provide exceptional operation with enhanced fuel volume delivery and faster vehicle response. Promotes a rise of fuel pressure from startup; reduces current consumption.
Hitachi is a Tier 1 OE supplier for high pressure fuel pumps
100% NEW, never remanufactured
Meets the OE performance and durability standards for this application
High strength aluminum housing for light weight and durability
Chemical resistant seals prevent premature wear from ethanol mixed fuels
Precision machined surfaces prevent fuel leakage and subsequent pressure drop
O-Ring/Gaskets included when applicable

from

$41.35

Fuel Pump Tappet

from

$322.99

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
Lower amperage draws less load on vehicle’s electrical system
Part is validated, tested and matched to the right vehicle application
Always be sure to check and clean fuel tank to avoid unnecessary returns
Lower failure rates due to its innovative design and durability

from

$559.99

Capable of delivering fuel at high pressures that can range from 2,000-2,800 PSI
Mechanically driven high fuel flow pump enables rail pressure build up quickly for fast start times
Fuel delivered directly into the engine combustion chamber for increased horsepower and fuel economy
Meets OE specifications

from

$41.81

Fuel Pump Control Mo

from

$202.99

Carquest Premium fuel pump modules and assemblies are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. We have invested in industry-leading quality improvements like upgraded turbine impellers and 100% carbon commutators to deliver greater reliability. Carquest Premium fuel pump modules are supplied with the pump strainer and gaskets or seals when required for the application. Carquest Premium fuel pump modules are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested
Includes installation gaskets or seals where applicable

from

$3.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$546.99

Capable of delivering fuel at high pressures that can range from 2,000-2,800 PSI
Mechanically driven high fuel flow pump enables rail pressure build up quickly for fast start times
Fuel delivered directly into the engine combustion chamber for increased horsepower and fuel economy
Meets OE specifications

from

$41.95

Fuel Pump Tappet

from

$637.35

Hitachi Automotive Systems manufactures and markets engine management, electric powertrain, drive control, and car information systems for major automotive original equipment manufacturers worldwide. As a part of the fuel delivery system, the fuel pump is the bloodline of a vehicle, sending a constant supply of pressurized fuel from the tank to the fuel injector. The pump creates positive pressure in the fuel lines, pushing fuel to the engine. Rely on Hitachi OE fuel pumps to disperse fuel accurately and meet optimal horsepower requirements for the modern vehicle!

Product Features:

Constant and pressurized supply of fuel
Accurate fuel dispensing
Fuel flow meets the optimal horsepower requirements of modern vehicles
OE quality and reliability

from

$392.16

DIRECT INJECTION FUE

from

$375.99

from

$286.99

CARQUEST fuel pump modules offer OEM or better performance from an Original Equipment Supplier. The latest advancements in fuel delivery technology are built-in to every CARQUEST Fuel Pump to deliver greater reliability.

Product Features:

Every single pump is 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performance
Triple barb hose fitting provides superior, long-lasting seal
Superior return porting for optimum fuel flow
Enhanced pump to flange harness design provides worry-free electrical performance
Ceramic sender card and float arm that utilizes vehicle-specific geometry to ensure accurate fuel gauge readings for each and every application
Gradient density, dual zone filtration designed for better contamination resistance

from

$239.65

Fuel Pump Control Mo

from

$221.49

Fuel Pump Control Mo

from

$73.46

Fuel Pressure Sensor

Most Sold 2008 Volkswagen GTI Fuel Injectors

Explore our best-selling Volkswagen parts for the 2008 GTI among 22 OEM and aftermarket options starting from $6.29.

show more show less

from

$99.99

Bosch is a leading manufacture for Gasoline Direct Injection application now provides the market with the solution for servicing the Injectors after being removed from the cylinder head. It is are recommended to replace the seals once the injectors are serviced as they are one time use. All Set of seal and kit bags come complete with all the necessary parts for a successful installation.

Product Features:

OE supplier, provides exact flow and original spray pattern for optimal performance
Enhances a homogeneous and lean-burn combustion
Key enabler for engine downsizing, while maintaining desired horsepower
High-pressure fuel is injected directly into the combustion chamber
Maintains new-car smoothness and drivability

from

$16.05

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
High-quality materials withstand extreme conditions
Undergoes extensive testing to ensure reliability
As a global manufacturer of automotive aftermarket products, we maintain complete quality control throughout the manufacturing process

from

$21.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation

from

$124.99

CARQUEST MAF sensors are 100% new and are produced by a certified OEM supplier that designs and manufactures new mass air flow sensors

Product Features:

CARQUEST MAF use all new high-quality components at the highest quality standards.
Manufactured with new and advanced technology to perform, fit and function at OE specifications.
All new product that is tested with OEM equipment to OEM standards
Outperforms competition when tested in extreme environmental conditions

from

$142.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
Stainless steel calibration slide and spring assembly prevents corrosion within the fuel control body leading to an extended service life
Precision wound and trimmed solenoid windings allow the computer to command efficient delivery of fuel
High-temp Viton O-rings enable prolonged sealing of injector under extreme heat conditions
Fiber optic yttrium aluminum garnet “YAG” laser welding and 100 million cycle testing ensure quality in every box
With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
BWD is a global manufacturer of original equipment and aftermarket fuel injection products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$188.99

Hitachis Air Flow Sensors (MAFs) measure the amount and characteristics of air entering the engine. Hitachi uses precision elements and high-quality components for enhanced durability and accurate air flow measurements. Hitachi MAFs are 100% air flow tested for ideal performance and are calibrated for each application ensuring your vehicle meets the strict emission standards set by the manufacturer. Details such as a contaminant bypass port (when applicable) and protected circuitry providing a durable and reliable product approved by OE manufacturers makes Hitachis air flow sensors the premium choice.

Product Features:

Hitachi is a Tier 1 OE supplier for air flow sensors
100% NEW, never remanufactured
Hitachi’s advanced precision elements and high quality components provide enhanced durability. We feature exact fitment and calibration for each vehicle, which assists engine efficiency and fuel mileage. Our sensors are 100% air flow tested to meet exac
Precision manufactured and assembled sensing elements for accurate air flow measurements

from

$111.99

Product Features:

Each unit is 100% tested to OE specifications
Includes new o-rings and seals made of premium OE quality materials
Includes application specific technical bulletin, where applicable

from

$194.99

Hitachi is a Tier 1 OE supplier for air flow sensors
100% NEW, never remanufactured
Hitachi’s advanced precision elements and high quality components provide enhanced durability. We feature exact fitment and calibration for each vehicle, which assists engine efficiency and fuel mileage. Our sensors are 100% air flow tested to meet exac
Precision manufactured and assembled sensing elements for accurate air flow measurements

from

$146.99

Advance Auto Parts is proud to carry all new mass air flow sensors that use high-quality components with the highest quality standards.

Product Features:

CARQUEST MAF use all new high-quality components at the highest quality standards.
Manufactured with new and advanced technology to perform, fit and function at OE specifications.
All new product that is tested with OEM equipment to OEM standards
Outperforms competition when tested in extreme environmental conditions

from

$24.09

Fuel Injector O-Ring

from

$67.99

CARQUEST’s line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and o-rings.

Product Features:

Each unit is 100% tested to OE specifications.
Includes new o-rings and seals made of premium OE quality materials.
Includes application specific technical bulletin, where applicable.

from

$358.94

Hitachi manufactures a direct fit Air Mass Meter that guarantees OEM quality, fit and performance.

Product Features:

OEM Quality Direct fit Application
Platinum coated sensing element
Meets or exceeds OEM specifications
Utilizes the factory style mounts, connectors and fittings
Provides exceptional reliability

from

$258.00

Intake Manifold Actuator

from

$193.99

100% new; Delphi OE Technology Validated to match the vehicle applications; Manufactured to meet or exceed OE requirements.

Product Features:

Delphi mass air flow sensors are the global benchmark for accuracy and signal noise
Delphi mass air flow sensors feature high quality sensing elements for outstanding performance over a wide range of ambient temperatures
Delphi is a manufacturer of OE mass air flow sensors since their first use over 30 years ago
All parts are calibrated and tested to match the OE part
Probe solution offered wherever possible to reduce repair time by eliminating the need to replace the flow tube.
Delphi OE technology validated to match the vehicle applications

from

$191.97

Air Mass Sensor

from

$187.05

AIR MASS SENSOR

from

$185.99

100% new; Delphi OE Technology Validated to match the vehicle applications; Manufactured to meet or exceed OE requirements.

Product Features:

Delphi mass air flow sensors are the global benchmark for accuracy and signal noise
Delphi mass air flow sensors feature high quality sensing elements for outstanding performance over a wide range of ambient temperatures
Delphi is a manufacturer of OE mass air flow sensors since their first use over 30 years ago
All parts are calibrated and tested to match the OE part
Probe solution offered wherever possible to reduce repair time by eliminating the need to replace the flow tube.
Delphi OE technology validated to match the vehicle applications

from

$119.99

GDI SEAL TOOL KIT

from

$53.99

WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to

from

$15.36

Fuel Injector Repair

from

$15.29

CARQUEST fuel injector seal kits include the necessary o-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.

Product Features:

Premium OE quality materials.
Services one injector.

from

$6.29

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

Top-Rated Fuel and Emissions Systems Brands For Your 2008 Volkswagen GTI

Shop for the best-rated brands offering Fuel and Emissions Systems and other products for your 2008 Volkswagen GTIs. Below you’ll find some of our best rated Fuel and Emissions Systems from Bosch and Dorman, and more. Fuel and Emissions Systems from these brands that fit a 2008 GTI start at just $24.09 and are rated as high as 5 stars. OEM and aftermarket Fuel and Emissions Systems don’t get more top quality, durable, and affordable than from the brands below.

Popular Bosch 2008 Volkswagen GTI Fuel and Emissions Systems

When it comes to maintaining or upgrading your 2008 Volkswagen GTI, using quality Fuel and Emissions Systems is essential to ensure durability and a perfect fit. Bosch ticks all of those boxes. We offer a wide selection of Bosch Fuel and Emissions Systems, specifically designed for the 2008 Volkswagen GTI. With over 13 Bosch brand Fuel and Emissions Systems in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $24.09, with an average price of just $112.65. Plus, with over 147 customer reviews and an average rating of 5 stars, you can trust that our Bosch Fuel and Emissions Systems will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$179.99

This product is not rated

Wideband Oxygen Sensor: 5 Wire, 22.44" Long, Heated, Exact Fit

“”

from
$137.99

This product is not rated

Oxygen Sensor: 4 Wire, 50.2" Long, Heated, Exact Fit

“”

from
$163.99

This product is not rated

Wideband Oxygen Sensor: 5 Wire, 25.98" Long, Heated, Exact Fit

“”

Popular Dorman 2008 Volkswagen GTI Fuel and Emissions Systems

Dorman auto parts is one of the highest quality Fuel and Emissions System brands in the market. Any 2008 Volkswagen GTI owner should feel confident when installing genuine Dorman parts in their vehicle. To ensure the best fit and performance for your 2008 GTI, Advance Auto Parts carries a full inventory of 4 Dorman Fuel and Emissions Systems. Plus you will be keeping your Volkswagen in peak condition while saving money because prices on these Dorman Fuel and Emissions Systems range from $52.99 to $367.31, plus, with more than 35 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Fuel and Emissions Systems below will deliver on both quality and value.

from
$367.31

This product is not rated

Vacuum Pump

“”

from
$140.99

This product is not rated

Fuel Pump Driver Module

“”

from
$199.99

(24)

Secondary Air Injection Pump

“The product was in stock great price. Will shop there again thank you Scott”

FAQs for 2008 Volkswagen GTI Fuel and Emissions Systems

Which Fuel and Emissions Systems are best-sellers for 2008 Volkswagen GTIs?

Out of 95 Fuel and Emissions Systems that fit 2008 Volkswagen GTIs, the following parts are the top sellers:

Fuel Tank Cleaning Kit (11692237) – $12.49
Secondary Air Injection Pump (20980058) – $199.99
Fuel Cap: 10827, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (10049265) – $16.49

What’s the price range for 2008 Volkswagen GTI Fuel and Emissions Systems?

Fuel and Emissions System prices for the 2008 Volkswagen GTI start at $2.60 and go up to $637.35 for the most premium parts.

What’s the average price of a Fuel and Emissions System for a 2008 Volkswagen GTI?

The average price for Fuel and Emissions Systems for the 2008 Volkswagen GTI is $140.09. Keep in mind the variety of part types within our Fuel and Emissions System category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Fuel and Emissions Systems for other Volkswagen GTI model years?

Yes, we currently carry Fuel and Emissions Systems for 17 model years of Volkswagen GTIs between 2007 and 2024. Fuel and Emissions Systems are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

What are the cheapest Fuel and Emissions Systems for my 2008 Volkswagen GTI?

The cheapest 2008 Volkswagen GTI Fuel and Emissions Systems we carry in stock are:

Breather O-Ring (11030830) – $2.60
O-RING (12005668) – $3.99
Fuel Injection Throttle Body Mounting Gasket (12547411) – $6.29
Brake Vacuum Pump Ga (11193515) – $11.85
Thermo Switch (11325174) – $11.99

What types of Fuel and Emissions Systems do you sell for my 2008 Volkswagen GTI?

As of 2/5/25, these are some of the most in-demand types of Fuel and Emissions Systems for a 2008 Volkswagen GTI:

Can I get help with 2008 Volkswagen GTI Fuel and Emissions System orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Volkswagen Fuel and Emissions Systems and more.

What is your return policy for Volkswagen GTI Fuel and Emissions Systems?

Advance Auto Parts keeps returns simple. For new Volkswagen GTI Fuel and Emissions Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2008 Volkswagen GTI Fuel and Emissions Systems

Delphi – Fuel Tank Cleaning Kit (Part No.FC01)

VDO – Intake Manifold Actuator (Part No.B1205383438VDO)

Elring – Fuel Injector Repair (Part No.C10401331259ELR)

Original Equipment – Fuel Pressure Sensor (Part No.C3001401146OEA)

Burgaflex – Breather Hose (Part No.B2010327524BUR)

Carquest Premium – Ambient Air Temperature Sensor (Part No.WTA1269)

Carquest Premium – Mass Air Flow Sensor (MAF) – 100% NEW (Part No.MQ6405)

Elring – Breather O-Ring (Part No.B2014450171ELR)

Pierburg – Combi Valve (Part No.B6033452466APG)

Dorman – Secondary Air Injection Pump (Part No.306-010)

Bosch – Pressure Sensor (Part No.0261230266)

Autopart International Inc – Fuel Pressure Sensor (Part No.C30012068614API)

Pierburg – Secondary Air Inj. S (Part No.B7067771415APG)

Carquest Premium – Diverter Valve (Part No.GAC1166)

Original Equipment – Fuel Pump Control Mo (Part No.E30061451769OEA)

Carquest Premium – Fuel Pressure Sensor (Part No.FPA1021)

Carquest Premium – Locking Fuel Cap (Part No.10597)

Vemo – Air Temp. Sensor (Part No.C60002930617VMO)

INA – Fuel Pump Tappet (Part No.E3013418177INA)

NTK – Wideband Oxygen Sensor: Air-Fuel Ratio 5 Wire, 27.5" Long, Heated, Direct Fit (Part No.27055)

NTK – Switching Oxygen Sensor: 4 Wire, 51.25" Long, Heated, Direct Fit (Part No.25687)

Carquest Premium – Evaporative Emissions System Leak Detection Pump (Part No.VDN1027)

Carquest Premium – GDI SEAL TOOL KIT (Part No.ATK-001)

Bosch – Bosch Purge Valve (Part No.B7080452523BOS)

Original Equipment – Vapor Canister Purge (Part No.B7098571210OEA)

Victor Reinz – Fuel Injection Throttle Body Mounting Gasket (Part No.71-16572-00)

Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61462)

Bosch – Oxygen Sensor: 4 Wire, 28.74" Long, Heated, Exact Fit (Part No.16002)

Bosch – Oxygen Sensor: 4 Wire, 24.92" Long, Heated, Universal (Part No.15733)

Bosch – Wideband Oxygen Sensor: 5 Wire, 22.44" Long, Heated, Exact Fit (Part No.17270)

Bosch – Wideband Oxygen Sensor: 5 Wire, 25.98" Long, Heated, Exact Fit (Part No.17431)

Bosch – Oxygen Sensor: 4 Wire, 50.2" Long, Heated, Exact Fit (Part No.16986)

NTK – Switching Oxygen Sensor: 4 Wire, 31.5" Long, Heated, Direct Fit (Part No.25656)

DENSO – Oxygen Sensor: 4 Wire, 50.28" Long, Heated, Exact Fit (Part No.234-4829)

DENSO – First Time Fit Oxygen Sensor (Part No.C5010374957ND)

DENSO – Oxygen Sensor: Downstream, 4 Wire, 28.74" Long, Heated, Exact Fit (Part No.234-4754)

DENSO – Oxygen Sensor (Part No.C5010835002ND)

NTK – Switching Oxygen Sensor: 4 Wire, 20.75" Long, Heated, Direct Fit (Part No.25675)

Bosch – Bosch Oxygen Sensor (Part No.C5010686624BOS)

Bosch – Oxygen Sensor (Part No.C50103313366BOS)

Walker – Walker Oxygen Sensor (Part No.C5010380204WKR)

Carquest Premium – Fuel Cap: 10827, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10827)

Carquest Premium – Locking Fuel Cap (Part No.10597)

Rein – Thermo Switch (Part No.ELT0059)

DENSO – Oxygen Sensor (Part No.C5010689984ND)

Bosch – Bosch Oxygen Sensor (Part No.C5010425433BOS)

DENSO – First Time Fit Oxygen Sensor (Part No.C5010374927ND)

DENSO – First Time Fit Air Fuel Ratio Sensor (Part No.C5015689986ND)

DENSO – Wideband Oxygen Sensor: Upstream, 5 Wire, 29.53" Long, Heated, Exact Fit (Part No.234-5036)

DENSO – Wideband Oxygen Sensor: Upstream, 5 Wire, 22.87" Long, Heated, Exact Fit (Part No.234-5107)

NTK – Wideband Oxygen Sensor: Air-Fuel Ratio 5 Wire, 29.5" Long, Heated, Direct Fit (Part No.24328)

Walker – Walker Oxygen Sensor (Part No.C5010380243WKR)

Bosch – Bosch Oxygen Sensor (Part No.C5010398331BOS)

Carquest Premium – Air Charge Temperature Sensor (Part No.WTA1398)

Carquest Premium – Ambient Air Temperature Sensor (Part No.WTA1269)

Vemo – Air Temp. Sensor (Part No.C60002930617VMO)

Bosch – Pressure Sensor (Part No.0261230266)

Carquest Premium – Ambient Air Temperature Sensor (Part No.WTA1106)

Dorman – Fuel Pump Driver Module (Part No.601-011)

Hitachi – High Pressure Fuel Pump – New Actual OE Part (Part No.HPP0004)

INA – Fuel Pump Tappet (Part No.E3013418177INA)

Delphi – Fuel Pump Module Assembly: With Float Arm (Part No.FG1403)

Delphi – Direct Injection High Pressure Fuel Pump: Without Gasket/Seal or Wiring Harness (Part No.HM10011)

Original Equipment – Fuel Pump Control Mo (Part No.E30061451769OEA)

Carquest Premium – Fuel Pump Module Assembly: Fuel Pump, Sending Unit and Strainer (Part No.M2496398)

Felpro – O-RING (Part No.71857)

Delphi – Direct Injection High Pressure Fuel Pump: Without Gasket/Seal or Wiring Harness (Part No.HM10012)

INA – Fuel Pump Tappet (Part No.E3013386832INA)

Hitachi – OE Direct Injection Fuel Pump, External High Pressure (Part No.E3027664014HIT)

Worldpac – DIRECT INJECTION FUE (Part No.E30271934799API)

Carquest Premium – Evaporative Emissions System Leak Detection Pump (Part No.VDN1027)

Spectra Premium – Fuel Pump Assembly (Part No.SP5021M)

Vemo – Fuel Pump Control Mo (Part No.E3006843870VMO)

Pierburg – Fuel Pump Control Mo (Part No.E30061451769APG)

Original Equipment – Fuel Pressure Sensor (Part No.C3001401146OEA)

Bosch – Fuel Injector (Part No.62855)

Carquest – Fuel Injector Seal Kit (Part No.274831)

Carquest Premium – Injector Seal Kit (Part No.AS060)

Carquest Premium – Mass Air Flow Sensor (MAF) – 100% NEW (Part No.MQ6405)