2008 Volkswagen Beetle Drivetrains
More 2008 Volkswagen Beetle Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 2008 Volkswagen Beetle, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 2008 Volkswagen Beetle Drivetrains
Elring – Gasket Maker (Part No.3K2003361623ELR)
from
$12.47
Gasket Maker
Rein – CV Boot Kit (Part No.BKN0031R)
from
$46.99
Boot kits protect a joint in the car that would be destroyed by dirt, sand and other particles if left exposed, even under normal conditions so it’s important that they be properly maintained and in good condition. Rein Automotive application specific inner and outer axle boot kits come complete with everything needed to do a proper installation, including OE grease and all the hardware needed for a guaranteed fit the first time.
Product Features:
See More
Product Features:
- Comes with all the needed hardware for the complete repair; clamps, washers, clips, etc.
- Comes with the OE grease
- Boot manufactured with highest quality materials to prevent cracking, wear and leaking
- Matches Original Equipment design specifications
INA – Input Shaft Bearing (Part No.J1052786336INA)
from
$12.16
Input Shaft Bearing
Vaico – Stub Axle (Part No.K5000131565VCO)
from
$53.18
The Vaico Stub Axle is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Rare Parts – Axle Support Bush (Part No.RP19965)
from
$36.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Improves steering and handling
- UV resistant
- No Squeak
Original Equipment – Axle Shaft Bearing Carrier (Part No.K4045163351OEA)
from
$470.88
The Original Equipment Axle Shaft Bearing Carrier is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Driveworks – Tapered Cup Wheel Bearing Assembly (Part No.S-LM-29710)
from
$7.49
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Corteco – Manual Trans. Seal (Part No.J115025492CFW)
from
$6.23
Manual Trans. Seal
National – Multi Purpose Seal (Part No.222050)
from
$8.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
National – Shaft Repair Sleeve (Part No.99128)
from
$41.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Febi – Axle Shaft Nut (Part No.K4030229650FEB)
from
$8.61
The Febi Axle Shaft Nut is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Beck/Arnley – Axle Nuts (Part No.103-0534)
from
$9.29
Always replace when installing new bearings. Premium-grade materials for long life and durability. Direct OE replacement.
See More
Febi – CV Boot Clamp (Part No.K6030310282FEB)
from
$4.06
CV Boot Clamp
CRP – Constant Velocity Boot Clamp (Part No.K6030274803)
from
$2.20
Constant Velocity Boot Clamp
GKN Drivetech – CV Joint Kit (Part No.K600017990LOB)
from
$175.21
SPIDAN and LOBRO joint kits contain all the individual parts needed for professional repairs: joint, boot, boot circlips, tightening straps, bolts, nuts, spacers, etc. GKN axle boots are specifically developed for the various joints. Their accurate fit guarantees optimum sealing and maximum wear resistance.
Product Features:
See More
Product Features:
- OEM Quality and a Direct fit Replacement
- Provides exceptional reliability.
- Lighter weight provides improved fuel efficiency.
- Better driving characteristics and comfort
Meyle – CV Joint Kit (Part No.K6000152443MEY)
from
$73.74
Using state-of-the-art production methods MEYLE C.V. joints are manufactured to highest quality standards. All components are precision-manufactured and perfectly geared to one another. MEYLE supplies C.V. joints as kits with accessory material including axle boot, grease and mounting hardware.
Product Features:
See More
Product Features:
- Highly resilient axle boot
- Induction-hardened rolling body raceways
- Precision-honed serration
Dorman – Spindle Nut M19-1.50 Hex Star Pattern (sold by each) (Part No.615-217)
from
$11.49
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Beck/Arnley – Axle Nuts (Part No.103-0512)
from
$8.49
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- Made with premium grade materials
- Quality construction for durability
- Designed for under vehicle environment
- Application specific for this vehicle
Valvoline – Import Multi-Vehicle Automatic Transmission Fluid, 1 Gallon (Part No.820681)
from
$36.99
Valvoline Import Multi-Vehicle Automatic Transmission Fluid is specifically formulated for use in most Toyota, Nissan, Honda and other imported vehicles. It is formulated with all synthetic base stocks and a proprietary additive system to ensure optimal transmission performance in a wide variety of vehicles. Valvoline Import Multi-Vehicle ATF can also be used in many domestic vehicles. It meets requirements of General Motors and Ford vehicles. Recommended for use in the following applications: Ford MERCON®, GM DEXRON®-II and DEXRON®-III, BMW LT 71141 and ETL-7045E, Nissan/Infiniti Nissan ATF, Matic-D, Matic-K and Matic-J, Mitsubishi Diamond SP-II and SP-III, Subaru ATF-HP, Hyundai/ KIA SP-II and SP-III , Toyota/Lexus Type T, T-III and T-IV , Honda/Acura ATF-Z1 (except in CVTs) , Mercedes Benz NAG1 , Volvo passenger car (except AW-1), and Volkswagen/Audi TL52162. For CVT applications Valvoline recommends Valvoline Full Synthetic CVT Fluid.
Product Features:
See More
Product Features:
- Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
- Enhanced anti-shudder protection for smooth shifting and maximum power transfer
- Developed with anti-wear technology to help improve transmission durability
- Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
Idemitsu – Type TLS Automatic Transmission Fluid, 1 qt (Part No.30040093-75000C)
from
$14.49
Formulated to meet the specific requirements of Toyota, Lexus, and Scion vehicles equipped with conventional (non-CVT) transmissions that require the use of ATF T-IV. Recommended for service-fill in all Toyota, Lexus, and Scion automatic transmissions whe
Product Features:
See More
Product Features:
- Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
- Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
- Provides superior cleanliness, maintaining the transmission free of sludge and varnish deposits
- Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
- Advanced anti-wear technology provides maximum protection to gears and bearings
- Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
Carquest Premium – CV Axle Shaft Assembly (Part No.NCV72060)
from
$95.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- 100% new axle and components
- New axle nut or attaching hardware included when applicable
- Bearings, races and housings are heat-treated for longer life
- Precision-engineered seal mating surfaces for leak-free performance
- High moly CV joint grease with stainless-steel boot bands
Carquest Premium – CV Axle Shaft Assembly (Part No.NCV204027)
from
$94.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- 100% new axle and components
- New axle nut or attaching hardware included when applicable
- Bearings, races and housings are heat-treated for longer life
- Precision-engineered seal mating surfaces for leak-free performance
- High moly CV joint grease with stainless-steel boot bands
Febi – CV Joint Bolt (Part No.K6050439247FEB)
from
$2.08
The Febi CV Joint Bolt is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
GKN Drivetech – CV Boot Kit (Part No.K6010179650LOB)
from
$22.66
With Clamps and Grease SPIDAN and LOBRO boots are specifically developed for the various joints – their accurate fit ensures optimum sealing of the joint. Up-to-date computerized equipment is used for the production of the boot. SPIDAN and LOBRO boot kits contain all the individual parts needed for professional repairs: boot, boot circlips, tightening straps, bolts, nuts, spacers, etc.
Product Features:
See More
Product Features:
- For every specific application a boot kit to the OES standard
- Reliable protection against damp and dirt
- Optimum sealing and abrasion resistance
- Manufactured according to DIN EN ISO 9001:2000
Rein – CV Joint Boot Kit (Part No.K6010106694RIN)
from
$36.16
With Clamps and Grease The Rein CV Joint Boot Kit is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
GKN Drivetech – CV Boot Kit (Part No.K6010137943LOB)
from
$60.54
With Clamps and Grease SPIDAN and LOBRO boots are specifically developed for the various joints – their accurate fit ensures optimum sealing of the joint. Up-to-date computerized equipment is used for the production of the boot. SPIDAN and LOBRO boot kits contain all the individual parts needed for professional repairs: boot, boot circlips, tightening straps, bolts, nuts, spacers, etc.
Product Features:
See More
Product Features:
- For every specific application a boot kit to the OES standard
- Reliable protection against damp and dirt
- Optimum sealing and abrasion resistance
- Manufactured according to DIN EN ISO 9001:2000
Febi – CV Joint Boot Kit (Part No.K601026759FEB)
from
$22.09
The Febi CV Joint Boot Kit is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
GKN Drivetech – CV Boot Kit (Part No.K6010134020LOB)
from
$35.89
With Clamps and Grease SPIDAN and LOBRO boots are specifically developed for the various joints – their accurate fit ensures optimum sealing of the joint. Up-to-date computerized equipment is used for the production of the boot. SPIDAN and LOBRO boot kits contain all the individual parts needed for professional repairs: boot, boot circlips, tightening straps, bolts, nuts, spacers, etc.
Product Features:
See More
Product Features:
- For every specific application a boot kit to the OES standard
- Reliable protection against damp and dirt
- Optimum sealing and abrasion resistance
- Manufactured according to DIN EN ISO 9001:2000
Popular 2008 Volkswagen Beetle Drivetrains Categories
2008 Volkswagen Beetle Drivetrains
You count on your 2008 Volkswagen Beetle to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 29 Drivetrains ranging in price from $2.08 to $470.88, you’re sure to find everything you need for your 2008 Volkswagen Beetle.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 18 different brands like Idemitsu, Carquest Premium, and National. 2008 Volkswagen Beetle Drivetrains start as low as $2.08!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 24 extensive product reviews on 2008 Volkswagen Beetle Drivetrains. Some of the top-rated Drivetrains products we carry are CV Boot Kit with 1.0 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 2008 Volkswagen Beetle below to get started!
Top-Rated Drivetrains Brands For Your 2008 Volkswagen Beetle
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2008 Volkswagen Beetle running right for years to come. In our inventory you’ll find brands like Idemitsu, Carquest Premium, National, and even more.
Popular Beck/Arnley Drivetrains
You’ll find popular Beck/Arnley brand products across Drive Shafts and Axles. All are waiting to get your 2008 Volkswagen Beetle back on the road. Some of the top-rated Beck/Arnley products in these categories are:
Top-Rated Drivetrains
If are what you’re looking for, our inventory holds plenty. We stock brand Drivetrains for your 2008 Volkswagen Beetle, and some of our most reviewed parts include:
FAQs for 2008 Volkswagen Beetle Drivetrains
What are the most purchased Drivetrains for the 2008 Volkswagen Beetle?
Out of 29 Drivetrains for the 2008 Volkswagen Beetle, the most popular in our inventory are:
What are the top-rated 2008 Volkswagen Beetle Drivetrains?
Top-rated Drivetrains for your 2008 Volkswagen Beetle based on customer reviews/ratings are:
from
$18.18
(1)
CV Boot Kit
“I absolutely love the look but these seat covers are total junk! The sides & back mesh material are of very poor quality, rip & snag super easy! Also,”
