2008 Toyota Prius Steering and Chassis Parts

Essential 2008 Toyota Prius Steering and Chassis Parts

Rare Parts – Sway Bar Bushing (Part No.RP22337)

Sway Bar Bushing

from

$21.29
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Rubber or Thermoplastic material
  • No Squeak
  • Restores vehicle handling
  • Improves body roll
See More

Imperial – Mounting Kit System (Part No.226201)

Mounting Kit System

from

$11.49
Product Features:
  • Imperial mounting kit system
  • For installation of transmission coolers and electric fans
  • Provides quick, effective installation of Imperial products
  • Contains nylon mounting rods, foam pads and locking buttons
  • Atermarket electric fan and cooler mounting rods
  • Made with the highest quality materials
  • Quality machined for durability
  • Removable buttons for relocation
See More

Maval – Complete Steering Rack, Remanufactured (Part No.M1000457294MAV)

Complete Steering Rack, Remanufactured

from

$678.67
Maval Manufacturing is a Global leader in the production of remanufactured steering racks that meet or exceed the OE requirements set by the vehicle manufacturers. Maval uses only the highest quality OE parts in the remanufacturing process and each unit goes through a comprehensive inspection process that must meet OE performance specifications.

Product Features:
  • OE quality and direct fit replacement
  • Remanufacture based on highest quality standards
  • Computerized tests insure that all products meet the OE performance specification.
  • Performance and quality approvals from OE steering gear and pump manufacturers world wide
See More

Imperial – Transmission Oil Cooler Hose (Part No.248001)

Transmission Oil Cooler Hose

from

$32.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:
  • Transmission oil cooler hose
  • 11/32″ x 4-1/2′
  • Designed for transmission fluid applications
  • Made for tight-radius applications found in transmission cooler installations
  • Compatible with 11/32 in. OEM cooler systems
  • Tube made of black chemigum (nitrile)
  • Reinforced with 2-spiral synthetic
  • Covered in black Hypalon
  • Compatible with 11/32 in. OEM cooler systems
  • Tube made of black chemigum (nitrile)
  • Reinforced with 2-spiral synthetic
  • Covered in black Hypalon
See More

Dorman – Left Front Steering Knuckle (Part No.698-167)

Left Front Steering Knuckle

from

$314.99
This steering knuckle is precision-engineered and rigorously tested to provide reliable replacement for the original knuckle on specific vehicles.

Product Features:
  • Direct replacement – this steering knuckle is designed to replace the original knuckle on specific vehicles
  • Reliable fit – precision-engineered to match the dimensions of original components
  • Trustworthy construction – manufactured to strict standards using durable materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Dorman – Left Front Steering Knuckle (Part No.698-169)

Left Front Steering Knuckle

from

$341.99
This steering knuckle is precision-engineered and rigorously tested to provide reliable replacement for the original knuckle on specific vehicles.

Product Features:
  • Direct replacement – this steering knuckle is designed to replace the original knuckle on specific vehicles
  • Reliable fit – precision-engineered to match the dimensions of original components
  • Trustworthy construction – manufactured to strict standards using durable materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Carquest Premium – R and P Bellow Kit (Part No.250-713093)

R and P Bellow Kit

from

$23.49
CARQUEST PREMIUM Chassis parts are engineered and benchmarked to Original Equipment (OE) performance standards. CARQUEST PREMIUM Chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability.  CARQUEST PREMIUM Chassis has been rigorously quality-tested, meeting or exceeding OE specifications.  CARQUEST PREMIUM Chassis parts have been designed to provide a stable and safe ride to meet customer expectations and  perform the way professional technicians demand.

Product Features:
  • OE matched design for Form, Fit, and Function
  • Engineered to protect steering rack from road contamination
  • Hardware included for easier installation (where applicable)
See More

EMPI – Steering Rack Boot Kit (Part No.M1030380142EMP)

Steering Rack Boot Kit

from

$22.82
Steering Rack Boot Kit

MOOG – Camber Adjusting Kit (Part No.K929)

Camber Adjusting Kit

from

$48.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Can bring vehicles back to factory specification
  • Can solve excessive tire wear and steering issues
  • Shims and bushings provide precise camber, caster and toe adjustments
  • Incorporates proven design and engineering features
  • Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
See More

MOOG – Camber Adjusting Kit (Part No.K90477)

Camber Adjusting Kit

from

$29.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Can bring vehicles back to factory specification
  • Can solve excessive tire wear and steering issues
  • Shims and bushings provide precise camber, caster and toe adjustments
  • Incorporates proven design and engineering features
  • Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
See More

MOOG – Alignment Cam Bolt Assortment (Part No.CAM1A)

Alignment Cam Bolt Assortment

from

$434.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Can solve excessive tire wear and steering issues
  • Provides like-new steering, ease of installation and longer life
  • Can bring vehicles back to factory specification
  • Shims and bushings provide precise camber, caster and toe adjustments
  • Incorporates proven design and engineering features
See More

Driveworks – Control Arm Cam Bolt Kit (Part No.DW-K90208)

Control Arm Cam Bolt Kit

from

$21.79
Driveworks Brand Control Arm Cam Bolt Kits are made to meet OE specifications. They work with the sway bar to reinforce the suspension system, preventing excessive body roll. Driveworks Brand chassis parts help ensure improved steering response and durabi

Product Features:
  • Meets or exceeds OE performance specifications
  • Precision engineered for improved ride and superior performance
  • Performance tested to ensure durability
See More

Driveworks – Camber Cam Bolt Kit (Part No.DW-K90477)

Camber Cam Bolt Kit

from

$24.49
Driveworks cam bolts easily install in place of the factory lower control arm mounting bolts.

Product Features:
  • Meets or exceeds OE performance specifications
  • Precision engineered for improved ride and superior performance
  • Performance tested to ensure durability
See More

Driveworks – Sway Bar Link Kit (Part No.DW-K750043)

Sway Bar Link Kit

from

$47.49
Sway Bar Link Kit

MOOG – Stabilizer Bar Link (Part No.K80230)

Stabilizer Bar Link

from

$66.99
Backed by superior materials and rigorous testing, MOOG sway bar links deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • EASY TO INSTALL — Wrench flats ensure easy installation and removal
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • KEEPS DIRT AND WATER OUT — Sealed boot shields internal components from wear-causing contaminants
  • STRONG AND DURABLE — Thick connecting rod adds strength while metal bearings and rubber preload deliver long life
  • PREMIUM MATERIALS — Made from premium materials for long-lasting dependability
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
See More

Dorman – Suspension Control Arm (Part No.524-152)

Suspension Control Arm

from

$125.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:
  • Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
  • Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
  • Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
  • Durably designed – additional coatings offer long-lasting rust and corrosion resistance
See More

Dorman – Suspension Control Arm (Part No.526-982)

Suspension Control Arm

from

$75.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:
  • Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
  • Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
  • Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
  • Durably designed – additional coatings offer long-lasting rust and corrosion resistance
See More

Whiteline – Sway Bar 22Mm Heavy Duty (Part No.BTR77)

Sway Bar 22Mm Heavy Duty

from

$282.99
Engineered to ‘Activate More Grip’, sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tyres thereby increasing cornering grip and improving outright performance. This Whiteline 22mm fixed position sway bar = more grip = better handling = outright performance – it’s the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tyre wear without affecting ride quality or comfort.

Product Features:
  • DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.
  • Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
See More

Rare Parts – Ball Joint (Part No.RP11300)

Ball Joint

from

$95.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Heat treated components
  • Dust seal to prevent contamination
  • Restores vehicle handling
  • Restores OE alignment
See More

CTR – Ball Joint (Part No.L2020138538CTR)

Ball Joint

from

$45.68
Every CTR ball joint is engineered to restore the handling of your vehicle to original equipment condition.

Product Features:
  • OE expertise and quality
  • Precision manufactured housing and components
  • Corrosion protection
  • Permanently attached boot
  • One-piece forged housing for easier steering
  • Ball joint kits include new pinch bolt, nut and other necessary parts for attachment
See More

Carquest Premium – Tie Rod End (Part No.310-423840)

Tie Rod End

from

$27.49
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability.  Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications.  Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and  perform the way professional technicians demand.  

Product Features:
  • OE matched design for Form, Fit, and Function
  • Advanced corrosion-resistant electro-coating to reduce rust
  • Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
  • Hex formed studs and/or wrench flats for ease of installation
  • Hardware included for easier installation (where applicable)
See More

MOOG – Tie Rod End (Part No.ES80303)

Tie Rod End

from

$56.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Loose or worn chassis parts can lead to premature tire wear
  • Exclusive cover plate protects against contaminants leaking into the bearing surface
  • Greaseable socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear
  • Patented cover plate design allows for tighter tolerances vs traditional designs for a more durable part
  • Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength
  • Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength
See More

Dorman – Suspension Axle Bushing (Part No.523-066)

Suspension Axle Bushing

from

$91.99
This axle pivot bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment on specific vehicles
  • Reliable fit – precision-engineered to match the design and dimensions of original components
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

MOOG – Alignment Shim (Part No.K6660-1)

Alignment Shim

from

$11.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Can bring vehicles back to factory specification
  • Can solve excessive tire wear and steering issues
  • Shims and bushings provide precise camber, caster and toe adjustments
  • Incorporates proven design and engineering features
  • Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
See More

MOOG – Alignment Shim (Part No.K6660-4)

Alignment Shim

from

$11.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Can bring vehicles back to factory specification
  • Can solve excessive tire wear and steering issues
  • Shims and bushings provide precise camber, caster and toe adjustments
  • Incorporates proven design and engineering features
  • Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
See More

MOOG – Alignment Shim (Part No.K100143)

Alignment Shim

from

$23.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Can bring vehicles back to factory specification
  • Can solve excessive tire wear and steering issues
  • Shims and bushings provide precise camber, caster and toe adjustments
  • Incorporates proven design and engineering features
  • Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
See More

MOOG – Alignment Shim (Part No.K6660-2)

Alignment Shim

from

$11.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Can bring vehicles back to factory specification
  • Can solve excessive tire wear and steering issues
  • Shims and bushings provide precise camber, caster and toe adjustments
  • Incorporates proven design and engineering features
  • Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
See More

MOOG – Alignment Shim (Part No.K6660-3)

Alignment Shim

from

$11.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Can bring vehicles back to factory specification
  • Can solve excessive tire wear and steering issues
  • Shims and bushings provide precise camber, caster and toe adjustments
  • Incorporates proven design and engineering features
  • Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
See More

2008 Toyota Prius Steering and Chassis Parts

You count on your 2008 Toyota Prius to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 38 Steering and Chassis Parts ranging in price from $11.49 to $434.99, you’re sure to find everything you need for your 2008 Toyota Prius.

Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 13 different brands like Imperial, Driveworks, and Moog. 2008 Toyota Prius Steering and Chassis Parts start as low as $11.49!

One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 534 extensive product reviews on 2008 Toyota Prius Steering and Chassis Parts. Some of the top-rated Steering and Chassis Parts products we carry are Camber Adjusting Kit with 5.0 stars and Tie Rod End with 3.0 stars.

Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 2008 Toyota Prius below to get started!

Top-Rated Steering and Chassis Parts Brands For Your 2008 Toyota Prius

Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2008 Toyota Prius running right for years to come. In our inventory you’ll find brands like Imperial, Driveworks, Moog, and even more.

Popular Imperial Steering and Chassis Parts

You’ll find popular Imperial brand products across Power Steering Parts. All are waiting to get your 2008 Toyota Prius back on the road. Some of the top-rated Imperial products in these categories are:
Mounting Kit System
from $11.49
(27)
Mounting Kit System
Power Steering Coolers
Transmission Oil Cooler Hose
from $32.49
(94)
Transmission Oil Cooler Hose
Power Steering Pressure Hoses
Power Steering Oil Cooler
from $28.49
(83)
Power Steering Oil Cooler
Power Steering Coolers

Top-Rated Steering and Chassis Parts


If are what you’re looking for, our inventory holds plenty. We stock brand Steering and Chassis Parts for your 2008 Toyota Prius, and some of our most reviewed parts include:
Transmission Oil Cooler Reinstallation Kit
from $20.79
(4)
Transmission Oil Cooler Reinstallation Kit
Power Steering Coolers

FAQs for 2008 Toyota Prius Steering and Chassis Parts

What are the most purchased Steering and Chassis Parts for the 2008 Toyota Prius?

Out of 38 Steering and Chassis Parts for the 2008 Toyota Prius, the most popular in our inventory are:
Sway Bar Link Kit
from $45.49
(33)
Sway Bar Link Kit
Sway Bar Link Kits
Stabilizer Bar Link
from $66.99
(18)
Stabilizer Bar Link
Sway Bar Link Kits
Stabilizer Bar Link
from $54.99
This product is not rated
Stabilizer Bar Link
Sway Bar Link Kits

What are the top-rated 2008 Toyota Prius Steering and Chassis Parts?

Top-rated Steering and Chassis Parts for your 2008 Toyota Prius based on customer reviews/ratings are:
Camber Adjusting Kit
from $27.49
(2)
Camber Adjusting Kit
“Decent bolt. Matched right up to my 2008 ES 350.”
Tie Rod End
from $103.99
(2)
Tie Rod End
“Top quality at a good price.”
Tie Rod End
from $56.99
(1)
Tie Rod End
“Good part”