2008 Saab 9-3 Brake Parts

Essential 2008 Saab 9-3 Brake Parts

ATE – Anti Rattle Spring / Clip (Part No.N1069279492ATE)

Anti Rattle Spring / Clip

from

$21.10
Caliper housing spring retaining clips are an essential component of ATE-designed fist floating brake calipers. The fist floating caliper consists of a holder and housing, which is located in rubber damping sleeves. It slides within the holder together with the outer brake pad while as the pad wears. To prevent the housing from lifting off the pad and causing noise issues, the caliper is pulled against the brake pad by the caliper housing spring retaining clip. These clips are exposed to continuous corrosion attack and should therefore also be replaced each time the brake pads are changed.

Product Features:
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Carquest Wearever – BRK HOSE 1 EA TRUTQ (Part No.BHA621189)

BRK HOSE 1 EA TRUTQ

from

$33.99
This automotive brake hydraulic hose was precision-engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting durability as part of a complete brake repair.

Product Features:
  • Ideal replacement – precision-engineered to match the performance of the original brake hose on specific vehicles
  • Position-specific – manufactured to precise measurements to provide an exact fit and easy installation
  • Quality assured – materials tested to exacting government-regulated safety and durability standards
  • Durable design – made with EPDM rubber and specially coated, corrosion-resistant fittings
  • Brand may vary by location
See More

Carquest Wearever – Disc Brake Caliper Guide Pin Boot Kit (Part No.8217A)

Disc Brake Caliper Guide Pin Boot Kit

from

$15.29
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. A complete brake job that includes new hardware goes a long way toward preventing comebacks. Changing out your Rubber Pin Boot or Slider Bushing Kit will ensure the guide pins are clean and free from debris for smoother braking.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Easy and fast replacement
  • Prevents noise and premature wear
  • Provides longer brake life and performance
See More

Carquest Wearever – Brake Rotor: Meets or Exceeds OE Specs (Part No.YH145284)

Brake Rotor: Meets or Exceeds OE Specs

from

$73.99
Carquest Premium rotors meet or exceed original equipment specifications while delivering superior stopping power. Carquest Premium rotors are manufactured with proper harmonic design and non-directional finish that eliminate noise and enhance pedal feel. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of your pads and rotors. Carquest Premium rotors are designed for long-lasting and quiet braking with superior performance.

Product Features:
  • Meets or exceeds OE design for superior stopping power
  • Exceeds ISO manufacturing guidelines (International Organization for Standardization)
  • Matches OE vane size for proper cooling
  • Optimal metallurgy and casting thickness to preventing warping
  • Air gap eliminates brake fade and increases pad life
  • Non-directional finish decreases break-in time.
See More

Cardone – Brake Master Cylinder Bleeding Tool (Part No.10-5000MCB)

Brake Master Cylinder Bleeding Tool

from

$15.99
CARDONE Master Cylinder Bench Bleeder Tool cuts typical bleeding procedures in half and is a more effective way to purge the brake system of air than other bleeding procedures. This handy, innovative tool is a must, just as bench bleeding is for removing all the air from your brake system, allowing you to spend less time in the garage, and more time on the road.

Product Features:
  • Each unit is 100% new, providing consistent performance when servicing your brake system
  • Easy to transfer for on-the-spot master cylinder bleeding
  • Fluid measurements clearly displayed on each unit in both ounces and milliliters for convenience
  • Easy to clean to ensure no cross contamination
  • Durability for long lasting performance
See More

Carquest Premium Gold – Brake Pad Set – Gold Semi-Metallic (Part No.GMKD973)

Brake Pad Set - Gold Semi-Metallic

from

$57.99
Carquest Premium Gold brake pads are original equipment replacement brake pads that provide consistent, quiet, and clean braking.

Product Features:
  • Application-specific formulations designed for extended pad life and clean wheels
  • Multi-layer shim for near silent braking
  • OE designed slots and chamfers for consistent performance
  • Hardware included on popular and late-model applications
See More

ACDelco – Multi-Purpose Wire Connector with Leads (Part No.PT2298)

Multi-Purpose Wire Connector with Leads

from

$37.99
ACDelco Professional Cornering Light Socket is a high quality aftermarket replacement component for one or more of the following vehicle systems: ignition, starting and charging, body-electrical and lighting, and/or engine fuel management. This premium aftermarket socket is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

ATE – Anti Rattle Spring / Clip (Part No.N1069226255ATE)

Anti Rattle Spring / Clip

from

$6.60
Caliper housing spring retaining clips are an essential component of ATE-designed fist floating brake calipers. The fist floating caliper consists of a holder and housing, which is located in rubber damping sleeves. It slides within the holder together with the outer brake pad while as the pad wears. To prevent the housing from lifting off the pad and causing noise issues, the caliper is pulled against the brake pad by the caliper housing spring retaining clip. These clips are exposed to continuous corrosion attack and should therefore also be replaced each time the brake pads are changed.

Product Features:
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Carquest – Multi Purpose Relay (Part No.83A1001)

Multi Purpose Relay

from

$18.79
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • High-quality products that meet OE appearance and performance to
See More

ATE – Pneumatic Brake Booster (Part No.N4000184431ATE)

Pneumatic Brake Booster

from

$284.17
ATE supplies brake boosters in single or tandem versions and in all desired sizes and is one of the world’s leading OE suppliers of brake control and brake assist systems. The tie rod version, which is available for all designs, provides further weight reduction and additional optimized elongation characteristics. Front-bolt concepts on a tie-rod basis facilitate installation. Electric and mechanical brake assist systems, sensors for OHB, ACC, ESC, etc., as well as measures designed to optimize crash behavior complete the product portfolio. Brake assist systems are an important aid in emergency braking situations in which a driver needs to respond to an emergency situation, but does not apply the brakes with sufficient pressure. The brake assist recognizes the brake application speed to detect this type of panic situation, and activates the brake booster or the EBS hydraulic unit. Maximum braking is thus achieved although the force on the brake pedal is low – the shorter braking distance can even be life-saving.

Product Features:
  • Original equipment (OE) quality
  • Wide range of single and tandem Brake Boosters
  • Unique tie-rod design meaning lighter and thinner parts for more efficient performance
  • Most units are made of steel, but lightweight aluminium versions are also available.
See More

Euro Stop – Euro-Stop High-Carbon Coated Rotors, ECE-R90 Brake Pads + Hardware Kit (Part No.ESK8156)

Euro-Stop High-Carbon Coated Rotors, ECE-R90 Brake Pads + Hardware Kit

from

$444.99
PowerStop is on a mission to deliver an easy way for any driver to upgrade their brakes – no matter where or how they use their vehicle. We are proud to offer our Euro-Stop Brake Kit, an affordable solution for owners of high-end European vehicles who prefer original equipment brakes. This brake pad and rotor kit is manufactured to original equipment specifications and comes with everything you need, including stainless-steel hardware, for an easy, bolt-on installation. The pads meet the strict ECE-R90 standards required throughout the European Union ensuring OE performance and quality, and the High-Carbon rotors are treated with a thin layer of Genuine GEOMET 360 coating to protect against rust and corrosion without diminishing braking performance. If you are looking to retain the original level of performance for your European vehicle but tired of the big price, Euro-Stop is for you.

Product Features:
  • EuroStop pads have been engineered to meet the strict European ECE-R90 standards – certified OE compatible fitment and performance
  • Rotors coated for optimum anti-corrosion protection
  • High-carbon rotor metallurgy provides improved thermal conductivity to resist distortion and cracking; improved damping coefficient to reduce squeal
  • Rotors manufactured to strict tolerances for DTV and runout for smooth quiet performance
  • Pads manufactured in Europe for European applications
  • ECE-R90 brake pads produce an equivalent amount of brake dust to the OE product. PowerStop also offers lower-dust pad and kit products.
  • Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
  • Buy with confidence from the originator & industry leader of brake kits
See More

PowerStop – Front Carbon-Fiber Ceramic Disc Pad And Rotor: Brake Kit, Z23 Daily Driver (Part No.K5349)

Front Carbon-Fiber Ceramic Disc Pad And Rotor: Brake Kit, Z23 Daily Driver

from

$252.99
PowerStop is on a mission to deliver an easy way for any driver to upgrade their brakes – no matter where or how they use their vehicle. Forget standard, off-the-shelf parts. Our Z23 Evolution Sport Brake Upgrade Kit comes with everything you need, from pads, rotors and premium stainless-steel hardware for an easy, bolt-on upgrade for your daily-driver. Along with increased braking power, the Carbon-Fiber Ceramic brake pads feature a low-dust formula to keep those wheels looking great while you say goodbye to nasty brake dust. These pads combine with Drilled & Slotted rotors to ensure a cool, smooth ride that protects against rust and corrosion. Give your daily-driver the easy and affordable performance upgrade it deserves with the Z23 Evolution Sport Brake Upgrade Kit.

Product Features:
  • This complete upgrade kit is engineered to improve the braking performance of the vehicle you use everyday
  • PowerStop engineered Carbon-Fiber Ceramic Z23 compound significantly enhances braking performance versus traditional ceramic brake pads
  • Low-dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE
  • Multi-Layer rubberized shims provide virtually noise-free braking
  • Drilled & Slotted performance rotors provide maximum cooling
  • Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
  • Bolt-on upgrade for stock brakes, no modifications necessary
  • Brake rotor, pad & hardware engineered to work together to increase stopping power, improve durability & eliminate dust
  • Rotors are zinc plated for maximum protection against rust.
  • Buy with confidence from the originator & industry leader of brake kits
See More

Carquest Wearever – Disc Brake Caliper Guide Pin Kit (Part No.H5025)

Disc Brake Caliper Guide Pin Kit

from

$7.49
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. Caliper Guide Pins are important to replace because they hold the brake piston in place to create effective stopping performance.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Easy and fast replacement
  • Helps deliver a quieter, more efficient braking system
  • Corrosion resistant coating for long-lasting durability against harsh roads
  • Manufactured with quality materials to suppress high stress levels
See More

Wearever – Remanufactured Brake Master Cylinder (Part No.11-3272)

Remanufactured Brake Master Cylinder

from

$145.99
Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders are treate

Product Features:
  • Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
  • Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
  • Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
  • Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
  • Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
  • Plastic reservoirs are vacuum-tested to ensure they are leak free.
See More

Carquest Wearever – Disc Brake Caliper Repair Kit (Part No.15292)

Disc Brake Caliper Repair Kit

from

$5.79
Brakes are designed as a system and all the parts need to work together for best performance. The boot and square cut seals included in our Caliper Repair Kit, ensure that the caliper works as designed during the apply and release cycle.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Increases the life span of the brake pads
  • Restores brakes to like-new performance
  • Prevents noise and premature wear
  • Direct replacement for a proper fit
See More

ATE – Original Brake Caliper, New – Friction Ready (Part No.N1040393058ATE)

Original Brake Caliper, New - Friction Ready

from

$244.12
100% New Caliper – Manufacturer recommends replacing calipers in pairs. With innovative fixed and floating calipers in aluminum and nodular cast iron, ATE is Europe’s market leader. And there is a good reason for that: during development, ATE simulates operational stresses in terms of braking load, vibration, corrosion and wear in extensive series of trials. This means that every basic safety-relevant function is ensured, the sealing of the hydraulic system as much as the venting function of the piston (roll-back), the return (knock-back) function, or the function of the housing/pad guides. ATE original brake calipers are supplied ready-to-install: rear-axle calipers with handbrake are usually pre-filled and preset. This permits simple and correct bleeding in the vehicle.

Product Features:
  • OE quality direct fit application.
  • Friction Ready
  • Corrosion inhibiting protection
  • Ensures long life and maximum performance
  • Natural exterior finish
See More

Professional Parts Sweden – Parking Brake Hardware Kit (Part No.N5005457584PPS)

Parking Brake Hardware Kit

from

$7.73
Parking Brake Hardware Kit

Carquest Premium – Semi Loaded Disc Brake Caliper with Bracket (Part No.19-B2912)

Semi Loaded Disc Brake Caliper with Bracket

from

$124.99
Carquest Premium Brake Calipers are manufactured to meet or exceed original equipment manufacturer specifications for performance and durability. Where applicable, Carquest Premium Brake Calipers feature a specially formulated OE style zinc di-chromate anti-corrosion finish that provides superior rust protection in all conditions. Carquest Premium Brake Calipers feature new OE design, stainless steel pistons manufactured for maximum durability, and precision machined for an exacting fit and smooth application of braking force. Carquest Premium Brake Calipers include 100% new OE design dust boots and EPDM rubber seals that provide increased resistance to thermal deterioration and years of-leak free operation. Carquest Premium Brake Calipers include application-specific brackets and abutment hardware where required, for easy installation and confident restoration of stopping power. 100% end-of-line inspection and pressure testing guarantees perfect performance right out of the box.

Product Features:
  • Meets or exceeds original equipment specifications for performance and durability
  • OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
  • Application-specific caliper bodies for easy installation
  • Brackets included where required, for complete system restoration
  • Meets or exceeds original equipment specifications for performance and durability
  • OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
  • Application-specific caliper bodies for easy installation
  • Brackets included where required, for complete system restoration
  • OE style, zinc di-chromate anti-corrosion finishes provide superior resistance to rust on all iron caliper bodies and brackets
  • 100% new, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
  • New bleeder screws, banjo bolts, and crush washers included for a complete repair
  • OE Style, stainless steel pad abutment hardware included
  • 100% end-of-line inspection and pressure testing ensures quality and performance
  • Caliper finish or coating may vary
See More

Pierburg – Brake Vacuum Pump (Part No.N4050389932APG)

Brake Vacuum Pump

from

$258.84
Brake Vacuum Pump

Carquest Premium – A/C Compressor Control Relay (Part No.RAA1236)

A/C Compressor Control Relay

from

$28.49
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Dorman – First Stop Disc Brake Caliper Repair Kit (Part No.N10501072202DOR)

First Stop Disc Brake Caliper Repair Kit

from

$6.01
Dorman’s Disc Brake Caliper Repair Kit contains the components necessary for repair of the Disc Brake Caliper. All of the rubber components are of high-quality EPDM compound for resistance to glycol-based brake fluid.

Product Features:
  • Replacement restores disc brakes to proper operation
  • Replacement prevents uneven braking
  • Direct replacement for a proper fit
  • Manufactured to strict engineering quality standards
See More

Otto Zimmermann – Coat-Z Brake Disc (Rotor) (Part No.N1000401714ZIC)

Coat-Z Brake Disc (Rotor)

from

$143.20
Since 2008 Zimmermann is offering almost 400 Standard and almost 400 Sports Brake Discs in a coated version named Coat Z. The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.

Product Features:
  • Coat-Z protective anti-corrosion coating
  • No formation of rust at the hub and herewith improved visual appearance
  • Immediate functional capability without removal of the coating before mounting
  • Excellent deceleration action and no distortion of friction ring at high temperatures
  • Substantial weight saving and therefore less unsprung mass
  • Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
  • Hot spots prevented by optimized design of ventilation channels
  • 1:1 exchange of original disc possible
  • Not subject to registration: general ABE certification supplied with disc
  • No conversion required for brake tuning
See More

Carquest Wearever – Disc Brake Rotor Meets or Exceeds OE Design (Part No.YH145556)

Disc Brake Rotor Meets or Exceeds OE Design

from

$74.99
Carquest Wearever rotors meet or exceed original equipment specifications while delivering superior stopping power. Carquest Wearever rotors are manufactured with proper harmonic design and non-directional finish that eliminate noise and enhance pedal feel. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of your pads and rotors. Carquest Wearever rotors are designed for long-lasting and quiet braking with superior performance.

Product Features:
  • Meets or exceeds OE design for superior stopping power
  • Exceeds ISO manufacturing guidelines (International Organization for Standardization)
  • Matches OE vane size for proper cooling
  • Optimal metallurgy and casting thickness to preventing warping
  • Air gap eliminates brake fade and increases pad life
  • Non-directional finish decreases break-in time
See More

Carquest Standard – Brake Pads: Reliable and Dependable Stopping (Part No.MKD936)

Brake Pads: Reliable and Dependable Stopping

from

$23.99
Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price.

Product Features:
  • Dependable stopping power
  • Single layer shim for quiet braking
  • OE-designed slots and chamfers to reduce noise and vibration
  • Powder-coated backing plate prevents corrosion
See More

PowerStop – Z17 Low-Dust Ceramic Brake Pads with Hardware (Part No.17-972)

Z17 Low-Dust Ceramic Brake Pads with Hardware

from

$63.99
The Power Stop Z17 Evolution Plus ceramic brake pads feature a ceramic formula designed to maximize stopping power while reducing brake dust & eliminating noise. Using OE positive mold technology along with a thermal scorched pad surface, Z17 pads maintain consistent wear and performance while ensuring a fast break-in. Stainless steel hardware is included with the Z17 brake pads making it easier to complete your brake job. The Power Stop Z17 Evolution Plus ceramic brake pads are an affordable stock replacement for all vehicles.

Product Features:
  • Low-dust ceramic formula designed to maximize stopping power and keep wheels clean
  • Positive mold technology for consistent wear and performance
  • Thermal scorched pad surface for a fast break-in
  • Chamfered and slotted to ensure noise free braking
  • Powder coated backing plate resists rust and corrosion to provide extended pad life
  • Multi-Layer rubberized shims provide virtually noise-free braking
  • Includes Premium stainless-steel hardware for easy installation
See More

Professional Parts Sweden – Parking Brake Cable (Part No.N5010405047PPS)

Parking Brake Cable

from

$56.09
Parking Brake Cable

Carquest Wearever – Parking Brake Cable (Part No.BCA660485)

Parking Brake Cable

from

$72.99
This parking brake cable has been engineered and tested to match the fit, function and performance of the original brake cable on specific vehicles. It features a corrosion-resistant design and durable materials for added strength and longevity.

Product Features:
  • Trustworthy replacement – engineered and tested to match the fit, function and performance of the original brake cable on specific vehicles
  • Quality design – inner cables are sheathed and lubricated to provide improved durability
  • Long-lasting construction – flexible casings are completely covered with conduit to prevent wear and tear of interior cables
  • Tough materials – zinc-plated fittings prevent corrosion
See More

Professional Parts Sweden – Parking Brake Cable (Part No.N5010156464PPS)

Parking Brake Cable

from

$72.07
Parking Brake Cable

2008 Saab 9-3 Brake Parts

You count on your 2008 Saab 9-3 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Brake Parts. With 93 Brake Parts ranging in price from $4.99 to $487.99, you’re sure to find everything you need for your 2008 Saab 9-3.

Brands matter. If you want to shop a specific Brake Parts brand, we stock 19 different brands like Carquest, Carquest Premium, and Carquest Professional. 2008 Saab 9-3 Brake Parts start as low as $4.99!

One of the best ways to find top quality OEM or aftermarket Brake Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 972 extensive product reviews on 2008 Saab 9-3 Brake Parts. Some of the top-rated Brake Parts products we carry are Oversized Brake Caliper Bolt with 4.3 stars and Brake Rotor: Meets or Exceeds OE Specs with 4.8 stars.

Did we mention you can order your Brake Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Brake Parts inventory for your 2008 Saab 9-3 below to get started!

Top-Rated Brake Parts Brands For Your 2008 Saab 9-3

Trusted Brake Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2008 Saab 9-3 running right for years to come. In our inventory you’ll find brands like Carquest, Carquest Premium, Carquest Professional, and even more.

Popular Driveworks Brake Parts

You’ll find popular Driveworks brand products across ABS Systems. All are waiting to get your 2008 Saab 9-3 back on the road. Some of the top-rated Driveworks products in these categories are:
A/C and Heater Relay
from $19.99
(1)
A/C and Heater Relay
ABS Relays

FAQs for 2008 Saab 9-3 Brake Parts

What are the most purchased Brake Parts for the 2008 Saab 9-3?

Out of 93 Brake Parts for the 2008 Saab 9-3, the most popular in our inventory are:
Ceramic Brake Pads - (4-Pad Set)
from $53.99
(55)
Ceramic Brake Pads – (4-Pad Set)
Rear Brake Pads and Shoes
Brake Master Cylinder Bleeding Tool
from $15.99
(10)
Brake Master Cylinder Bleeding Tool
Brake Master Cylinder Bleeders
Ceramic Brake Pads - (4-Pad Set)
from $63.99
(40)
Ceramic Brake Pads – (4-Pad Set)
Rear Brake Pads and Shoes

What are the top-rated 2008 Saab 9-3 Brake Parts?

Top-rated Brake Parts for your 2008 Saab 9-3 based on customer reviews/ratings are:
Oversized Brake Caliper Bolt
from $25.49
(40)
Oversized Brake Caliper Bolt
“Had my caliper bolt strip on my mk4 Jetta. This oversized caliper bolt not only saved me from having to buy a knuckle, but made the repair painless an”
Brake Rotor: Meets or Exceeds OE Specs
from $119.99
(8)
Brake Rotor: Meets or Exceeds OE Specs
“OEM-like replacement part. I purchased an off brand rotor initially which ended up warping after a couple months. I replaced with these and feel a si”
Semi Loaded Disc Brake Caliper with Bracket
from $109.99
(5)
Semi Loaded Disc Brake Caliper with Bracket
“Seems to be a significant improvement!!”