2008 Mitsubishi Outlander Air Suspension and Kits

The Air Command Standard Duty Dual Electric Air Compressor System Kit Allows You To Adjust Your Air Springs With The Touch Of A Button. It Offers A Built in Air Source For Your Suspension System, Making It Easy To Alter Your Springs To Align With The Load Type And Environment. When Shopping For Air Accessories, You will Find That Firestone Air Command Standard Duty Dual Electric Air Compressor System Kit Is Designed To Have A Couple Of Special Benefits. First, The Air Command Standard Duty Dual Electric Air Compressor System Kit Comes Ready To Install, So You Can Set It Up And Get Back To The Road where You Want To Be. Just Connect A Few Wires To The Compressor And A Few To Your Vehicle. The Air Lines And Wiring Harness Can Be Plugged Into The Same Side Of The Unit For Smoother Routing Of Lines And Power Supply. After The Air Command Standard Duty Dual Electric Air Compressor System Kit Is Properly Installed, You Can Make Pressure Adjustments By Pressing A Single Button. This Air Command Standard Duty Dual Electric Air Compressor System Kit Component Allows For Side To Side Or Front to rear Leveling, Real time Pressure Readout, And Dual Left And Right PSI And Pressure Control Readouts. The Air Command Standard Duty Dual Electric Air Compressor System Kit Easy to read Needle Gauge Can Be Viewed Day Or Night, Without Straining Or Squinting Your Eyes. Prior To Installing The Air Command Standard Duty Dual Electric Air Compressor System Kit, Review The Instructions And Identify All Of The Components To Help Make Sure You Get Maximum Performance From Both Your Air Springs And Air Command Standard Duty Dual Electric Air Compressor System Kit. The Installation Steps Are Different Depending On Whether You are Enhancing An Existing Air Helper Spring System With The Air Command Standard Duty Dual Electric Air Compressor System Kit Or Installing It With A New Air Spring System.

Product Features:

• Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
• Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Dual Point Fill (Both Air Springs Fill Independently Of Each Other)
• Light Duty Compressor Specs (120 PSI Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)

Designed to protect the strut, the Monroe Strut-Mate Boot Kit is the perfect replacement for a damaged jounce bumper or boot. Heavy-duty construction and unique design features make it the ideal choice for maximum rod protection and improved strut life.

Product Features:

• REPLACES DAMAGED JOUNCE BUMPER OR BOOT – Avoid premature strut failure by replacing missing or damaged strut components
• PROTECTS PISTON ROD – Protects piston rod finish from rust and corrosion and helps reduce oil leakage
• KEEPS MOISTURE AND DIRT OUT – Self-draining design eliminates retention of moisture and other unwanted debris
• ENHANCES STRUT LIFE – Delivers protection from severe suspension movement to improve strut durability
• PERFECT PAIRING – Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
• EASY TO INSTALL – Direct fit OE replacement with firm friction connection that helps keep the boot in place
• BUILT TO LAST – Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts

Designed to protect the strut, the Monroe Strut-Mate Boot Kit is the perfect replacement for a damaged jounce bumper or boot. Heavy-duty construction and unique design features make it the ideal choice for maximum rod protection and improved strut life.

Product Features:

• REPLACES DAMAGED JOUNCE BUMPER OR BOOT – Avoid premature strut failure by replacing missing or damaged strut components
• PROTECTS PISTON ROD – Protects piston rod finish from rust and corrosion and helps reduce oil leakage
• KEEPS MOISTURE AND DIRT OUT – Self-draining design eliminates retention of moisture and other unwanted debris
• ENHANCES STRUT LIFE – Delivers protection from severe suspension movement to improve strut durability
• PERFECT PAIRING – Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
• EASY TO INSTALL – Direct fit OE replacement with firm friction connection that helps keep the boot in place
• BUILT TO LAST – Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts

HEIGHT SENSOR

Every new strut deserves a Monroe Strut-Mate Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.

Product Features:

• PERFECT PAIRING – Ideal match for the ride control characteristics of Monroe struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
• REDUCES NOISE AND VIBRATION – Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
• REPLACES OE – Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
• RIGOROUS TESTING – Fit checked and ride tested for quality you can count on
• EASY TO INSTALL – Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily

KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.

Product Features:

• The Highest Quality Replacement Strut Mount Available
• Optimizes Suspension Performance By Offering Original Equipment Quality Replacement Components Designed For Each Application
• Superior Rubber Reduces Noise, Vibration And Harshness
• Mount Bearings Provide Smoother Steering And Help Retain Front End Alignment
• Matched Grade Studs And Nuts

Every new strut deserves a Monroe Strut-Mate Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.

Product Features:

• PERFECT PAIRING – Ideal match for the ride control characteristics of Monroe struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
• REDUCES NOISE AND VIBRATION – Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
• REPLACES OE – Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
• RIGOROUS TESTING – Fit checked and ride tested for quality you can count on
• EASY TO INSTALL – Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily

KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.

Product Features:

• The Highest Quality Replacement Strut Mount Available
• Optimizes Suspension Performance By Offering Original Equipment Quality Replacement Components Designed For Each Application
• Superior Rubber Reduces Noise, Vibration And Harshness
• Mount Bearings Provide Smoother Steering And Help Retain Front End Alignment
• Matched Grade Studs And Nuts

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

• High polish chrome steel bearing races
• Replacement helps restore vehicle handling
• Superior rubber to steel bonding for durability
• Engineered to meet or exceed OE requirements
• Provides like-new steering, ease of installation and longer life
• Incorporates proven design and engineering features