2008 Mercury Grand Marquis Drive Shafts and Axles
More 2008 Mercury Grand Marquis Drive Shafts and Axles
Find your specific 2008 Mercury Grand Marquis original or aftermarket Drive Shafts and Axles below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 2008 Mercury Grand Marquis Drive Shafts and Axles
Yukon Gear – 1.250" Pinion Adaptor Sleeve (Stock Pinion Into Large Support) (Part No.32239)
from
$63.99
1.250″ pinion adaptor sleeve (stock pinion into large support).
Product Features:
See More
Product Features:
- Adapter sleeve
- Fits Ford 9″
- Adapts 28 spline pinion into 35 spline pinion support
Yukon Gear – Flange Yoke For Ford 7.5" Passenger And Truck (4.3" Od) (Part No.41045)
from
$319.99
Yukon flange yoke for Ford 7.5″ passenger and truck (4.3″ OD). All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Ford 7.5″
- 28 spline
- Round companion flange
- 4.3″ O.D.
Yukon Gear – Model 20 & Model 35 Axle Stud 1/2"-20 X 1.625" Length, 0.620" Dia – Knurl (Part No.33181)
from
$5.99
Model 20 & Model 35 axle stud 0.620″ Dia. Shank.
Product Features:
See More
Product Features:
- Axle stud for AMC Model 20 and Model 35
- 1/2″ x 20 thread
- 0.620″ knurl diameter
- 1.625″ long
Yukon Gear – Axle Stud , 58Mm X M14-2.0 (Part No.33557)
Pro-King – Axle Seal (Part No.721A074)
from
$1.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.
Product Features:
See More
Product Features:
- All products are designed to meet or exceed OE quality, form, fit and funtion.
Yukon Gear – Axle Seal For 5707 Or 1563 Bearing (Part No.30196)
from
$6.99
Axle seal for 5707 OR 1563 bearing.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Rear axle seal
- 2.250″ O.D.
Timken – Wheel Seal (Part No.K8010216437TIM)
from
$8.28
Wheel Seal
Yukon Gear – C/Clip (Part No.33083)
from
$8.99
C/Clip for Chrysler 8.25″, Ford 7.5″, 8.8″, GM 12 bolt car & truck, 8.2″, 8.5″ & 8.6″.
Product Features:
See More
Product Features:
- c-clip for Chrysler 8.25″, Ford 8.8″, GM 12 bolt car and truck and GM 8.2″, 8.5″ and 8.6″
- .150″ thick
Yukon Gear – 7.5" C/Clip, Ag Positraction (Part No.33079)
from
$47.99
7.5″ C/clip, AG positraction
Product Features:
See More
Product Features:
- C-clip
- Fits Ford 7.5″ with Auburn Gear positraction
Yukon Gear – Ford 7.5" C/Clip, Tracloc & Standard Open (Part No.33080)
from
$8.99
Ford 7.5″ C/clip, TracLoc & standard Open.
Product Features:
See More
Product Features:
- c-clip for Ford 7.5″
- Fits standard open and Trac Loc applications
- Not compatible with Auburn Gear positraction
Dorman – Help – Driveshaft Flange Bolts (Part No.80992)
from
$20.29
This drive shaft bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine mount bolt matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this drive shaft bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Rear Drive Shaft: Adjustable (Part No.976-633)
from
$487.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
Dorman – Rear Drive Shaft (Part No.986-272)
from
$722.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
Cardone – Rear Drive Shaft: Not Greasable, Direct Replacement (Part No.65-2033)
from
$471.99
CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100% dynamically balanced, resulting in vibration-free performance at all speeds.
Product Features:
See More
Product Features:
- Built to match O.E. form, fit and function.
- 100% NEW universal joints are installed to ensure proper fit and optimal performance.
- All slip yokes are lubricated to prevent premature wear.
- Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.
National – Bearings (Part No.M88010)
from
$10.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Bearings (Part No.M88048)
from
$15.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Conversion Bearing For Small Bearing Ford 9" Axle In Large Bearing Housing (Part No.18046)
from
$83.99
Conversion bearing for small bearing Ford 9″ axle in large bearing housing.
Product Features:
See More
Product Features:
- Axle bearing
- Fits Ford 9″
- Conversion bearing to install small bearing axle into large bearing housing
- 3.150″ O.D.
- 1.377″ I.D.
Driveworks – Axle Repair Bearing (Part No.S-RP-5707)
from
$16.49
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Yukon Gear – R1563Tav Rear Axle Bearing And Seal Kit (Part No.10004)
from
$42.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. R1563TAV axle bearing and seal kit, TorringtonBrand, 2.250″ OD, 1.400″ ID. This axle bearing & seal kit services one side only.
Product Features:
See More
Product Features:
- Includes axle bearing and seal
- Services one side
- Torrington Brand
- 2.250″ O.D.
- 1.400″ I.D.
Spicer – Universal Joint (Part No.5-1350X)
from
$44.99
You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
See More
Spicer – Universal Joint (Part No.5-153X)
from
$28.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More
Driveworks – Universal Joint (Part No.DW-331BL)
from
$31.99
DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).
Product Features:
See More
Product Features:
- The cross is hot forged for the higher torque and horsepower
- The bearing cups are made by cold forging, having higher strength and better rigidity
- Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
- Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
- Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
- Snap rings are held to strict tolerances to ensure proper cup position and retention
- Nitrile rubber seals to optimize grease retention and reduce contamination
Spicer – Universal Joint (Part No.5-1310X)
from
$35.99
You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
See More
Spicer – Universal Joint (Part No.5-178X)
from
$42.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More
Spicer – SPICER U-JOINT (Part No.5-1310-1X)
from
$44.99
SPICER U-JOINT
Popular 2008 Mercury Grand Marquis Drive Shafts and Axles Categories
2008 Mercury Grand Marquis Drive Shafts and Axles
Maybe you’re in the middle of a full rebuild of that 2008 Mercury Grand Marquis. Maybe you just need a couple of Drive Shafts and Axles. Either way, Advance Auto Parts has 21 different Drive Shafts and Axles in our inventory ranging from $1.99 to $487.99. That means you can find the exact parts or products you need to keep that 2008 Mercury Grand Marquis running smoothly.
Drive Shafts and Axles are only as good as their brand. We stock 8 different brands to make sure you have plenty of trusted parts to choose from for your 2008 Mercury Grand Marquis. DriveWorks, Spicer, and National are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Drive Shafts and Axles for your 2008 Mercury Grand Marquis, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 255 reviews in this category, some of the top rated parts include Bearings with 4.8 stars and Wheel Lug Stud with 3.0 stars.
So if you’re in the market for aftermarket Drive Shafts and Axles to keep your 2008 Mercury Grand Marquis rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Drive Shafts and Axles Brands To Make Your 2008 Mercury Grand Marquis Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 2008 Mercury Grand Marquis demands trusted brand parts and products to keep it running. Many trusted brands of Drive Shafts and Axles make up Advance Auto Parts’ inventory, and all are ready to help make your Grand Marquis the best it can be. Be sure to browse some of our top Drive Shafts and Axles brands and parts.
Popular Dorman – Help Drive Shafts and Axles
We carry Dorman – Help parts in our stock across Drive Shaft Support Bolts categories, plus more. For a 2008 Mercury Grand Marquis, our most popular Dorman – Help Drive Shafts and Axles include:
Top 2008 Mercury Grand Marquis Drive Shafts and Axles from Driveworks
Driveworks products are another trusted brand when it comes to Drive Shafts and Axles for your 2008 Mercury Grand Marquis. Popular Driveworks parts include:
FAQs for 2008 Mercury Grand Marquis Drive Shafts and Axles
What are the most purchased Drive Shafts and Axles for the 2008 Mercury Grand Marquis?
Out of 21 Drive Shafts and Axles for the 2008 Mercury Grand Marquis, the most popular in our inventory are:
What are the top-rated 2008 Mercury Grand Marquis Drive Shafts and Axles?
Top-rated Drive Shafts and Axles for your 2008 Mercury Grand Marquis based on customer reviews/ratings are:
from
$10.49
(4)
Bearings
“Goes with M88010 bearing cup.
Application was the pinion bearing race for a Ford 9 Inch on a 1957 Ford F-100.”
from
$7.99
(1)
Wheel Lug Stud
“These are SCREW in design (even though the image shows press) not entirely sure how they “fit” my 2016 JKU Rubicon since my factory and Yukon after ma”
