2008 Mercedes-Benz C300 Drivetrains

Essential Drivetrains for 2008 Mercedes-Benz C300s

Corteco – Centering Sleeve (Part No.K1070569198CFW)

Centering Sleeve

from

$54.15
Centering Sleeve

Idemitsu – Type TLS Automatic Transmission Fluid – 1 qt (Part No.10106-042K)

Type TLS Automatic Transmission Fluid - 1 qt

from

$11.79
Formulated to meet the specific requirements of Toyota, Lexus, and scion vehicles equipped with conventional (non-CVT) transmissions that require the use of ATF T-IV. Recommended for service-fill in all Toyota, Lexus, and Scion automatic transmissions where ATF T-IV is specified. Fuel economy demands and more sophisticated electronic controls have made automatic transmissions not only more complex, but also unique to each vehicle manufacturer. Long gone are the days of having just a couple choices of automatic transmission fluid type. IDEMITSU is the factory fill Automatic Transmission Fluid (ATF) supplier to most Asian imports. IDEMITSU application-specific ATF products match the exact friction materials and performance requirements of each different vehicle model for which they are made.

Product Features:
  • Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
  • Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
  • Provides superior cleanliness, maintaining the transmission free of sludge and varnish deposits
  • Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
  • Advanced anti-wear technology provides maximum protection to gears and bearings
  • Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
See More

Febi – Drive Shaft Flex Joint (Guibo) (Part No.K1020426392FEB)

Drive Shaft Flex Joint (Guibo)

from

$146.98
With Hardware The OE quality Febi flex joint is made of high quality rubber and is reinforced with advanced fiber materials. The manufacturer recommends the flex disc be replaced whenever the clutch components are being replaced. TECH TIP : Flex discs have an alignment or triangle arrow formed into the rubber. The pointed end must face the mounting flange on the transmission when installed to ensure longevity.

Product Features:
  • OE quality, fit and performance
  • High quality rubber
  • Reinforced with advanced materials
  • Excellent vibration control
See More

Vaico – Driveshaft Support (Part No.K1030294678VCO)

Driveshaft Support

from

$96.97
Driveshaft Support

Corteco – Pinion Seal (Part No.J7010247118CFW)

Pinion Seal

from

$20.34
Pinion Seal

GKN Drivetech – CV Boot Kit (Part No.K6010294989GKN)

CV Boot Kit

from

$73.16
CV Boot Kit

Beck/Arnley – Cu Boot Kit (Part No.103-2938)

Cu Boot Kit

from

$25.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • One piece neoprene boot
  • Kit complete with boot, grease, and hardware for complete installation
  • Hardware matches original design requirements
  • Application specific for this vehicle
See More

National – Bearings (Part No.A-17)

Bearings

from

$15.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Rein – Drive Shaft-Ctr Support Bearng (Part No.BEM0039P)

Drive Shaft-Ctr Support Bearng

from

$13.99
Drive Shaft-Ctr Support Bearng

SKF – Drive Shaft Support Bearing (Part No.K1040100111SKF)

Drive Shaft Support Bearing

from

$43.52
Rugged SKF drive shaft support bearings are built to meet or exceed OE specifications. The Support Bearings are also built on the years of experience that SKF has earned designing and supplying bearings to the world’s largest OE manufacturers. Engineered and manufactured to specific application requirements that deliver precise drive shaft alignment and support. Center support bearings are pre-lubricated and sealed with metal reinforced seals to prevent contamination. Rubber support cushions are manufactured from durable rubber compounds that provide maximum support while isolating the driveline shaft from damaging vibration. Drive shaft support frames are constructed from high quality steel or aluminum that provides additional strength and long life in harsh environments.

Product Features:
  • Original equipment design and quality
  • Utilizes OE equivalent or better materials
  • Pre-Lubricated and reinforced seals
  • Rubber support cushions are manufactured from durable rubber compounds
  • Support frames are constructed from high quality steel or aluminum
See More

Rein – Driveshaft Boot (Part No.BKD0066R)

Driveshaft Boot

from

$6.29
Boot kits protect a joint in the car that would be destroyed by dirt, sand and other particles if left exposed, even under normal conditions so it’s important that they be properly maintained and in good condition. Rein Automotive provides application specific driveshaft boot kits that come guaranteed to fit the first time.
See More

Dorman – Rear Drive Shaft: Adjustable (Part No.976-308)

Rear Drive Shaft: Adjustable

from

$884.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle.
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Dorman – Front Driveshaft Assembly (Part No.938-353)

Front Driveshaft Assembly

from

$599.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Cardone – Drive Shaft: Not Greasable, Direct Replacement (Part No.65-9000)

Drive Shaft: Not Greasable, Direct Replacement

from

$812.99
CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100% dynamically balanced, resulting in vibration-free performance at all speeds.

Product Features:
  • Built to match O.E. form, fit and function.
  • 100% NEW universal joints are installed to ensure proper fit and optimal performance.
  • All slip yokes are lubricated to prevent premature wear.
  • Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.
See More

National – Shaft Repair Sleeve (Part No.99177)

Shaft Repair Sleeve

from

$39.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Driveworks – Taper Bearing Set (Part No.S-A-17)

Taper Bearing Set

from

$9.49
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

GKN Drivetech – Axle Assembly (Part No.K4000436282GKN)

Axle Assembly

from

$848.27
Axle Assembly

Autopart International Inc – Axle Assembly (Part No.K40003009338API)

Axle Assembly

from

$195.19
Axle Assembly

Autopart International Inc – Axle Assembly (Part No.K40003009305API)

Axle Assembly

from

$283.25
Axle Assembly

Elring – Pinion Shaft Nut (Part No.J70301324405ELR)

Pinion Shaft Nut

from

$2.07
Pinion Shaft Nut

Corteco – Trans Case Output Sh (Part No.J71211338291CFW)

Trans Case Output Sh

from

$8.49
Trans Case Output Sh

Upgrade your 2008 Mercedes-Benz C300 with Top-Quality Drivetrains

When it comes to maintaining or upgrading your 2008 Mercedes-Benz C300, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Mercedes-Benz or enhancing its overall performance, Drivetrains are key to keeping your C300 functioning at its best. At Advance Auto Parts, we offer a wide selection of 33 Drivetrains for the 2008 Mercedes-Benz C300, designed to meet your needs without breaking the bank. From Drive Shafts and Axle replacements to Differentials upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Drivetrains for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Drivetrains for your 2008 Mercedes-Benz C300 at great prices. Our Drivetrains inventory for this model ranges from just $2.07 to $1,553.50, with an average price of $181.66. Our 33 Drivetrains in stock come from 16 trusted brands, so you’re sure to find the right part for your 2008 Mercedes-Benz C300 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2008 Mercedes-Benz C300, we stock popular OEM and aftermarket Drivetrains from top names like Idemitsu National, and more. Idemitsu Drivetrains start at just $11.79 and boast an impressive 5 stars average rating from customers. With 36 customer reviews and counting, our 2008 Mercedes-Benz C300 Drivetrains have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Drivetrain upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2008 Mercedes-Benz C300 is always ready to roll. We’re committed to providing you with everything you need to keep your C300 in top shape, all in one place. Start shopping confidently below for your 2008 Mercedes-Benz C300!

Best-Selling Drive Shafts and Axles for 2008 Mercedes-Benz C300s

Enhance the driving experience in your Mercedes-Benz with 23 quality Drive Shafts and Axle components, starting at $6.29.

National – Shaft Repair Sleeve (Part No.99177)

Shaft Repair Sleeve

from

$39.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

National – Bearings (Part No.A-17)

Bearings

from

$15.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Bearings (Part No.106-CC)

Bearings

from

$41.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

FAG – Drive Shaft Support Bearing (Part No.K1040100111FAG)

Drive Shaft Support Bearing

from

$30.10
FAG drive shaft support bearings are built to meet or exceed OE specifications. FAG Center support bearings are pre-lubricated and sealed with metal reinforced seals to prevent contamination.

Product Features:
  • Original equipment design and quality
  • Utilizes OE equivalent or better materials
  • Pre-Lubricated and reinforced seals
See More

Dorman – Front Drive Shaft: Adjustable, OE Fix (Part No.938-241)

Front Drive Shaft: Adjustable, OE Fix

from

$1283.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Ready to install – this drive shaft is shipped pre-assembled and factory balanced to ensure immediate smooth operation.
  • Simplifies repair – this replacement makes the U-joints serviceable for simpler maintenance.
  • All-new manufacturing – made 100% new, not remanufactured, so there’s no core charge or return hassle
  • Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
See More

Febi – Drive Shaft Flex Joint (Guibo) (Part No.K1020426392FEB)

Drive Shaft Flex Joint (Guibo)

from

$146.98
With Hardware The OE quality Febi flex joint is made of high quality rubber and is reinforced with advanced fiber materials. The manufacturer recommends the flex disc be replaced whenever the clutch components are being replaced. TECH TIP : Flex discs have an alignment or triangle arrow formed into the rubber. The pointed end must face the mounting flange on the transmission when installed to ensure longevity.

Product Features:
  • OE quality, fit and performance
  • High quality rubber
  • Reinforced with advanced materials
  • Excellent vibration control
See More

Rein – Drive Shaft-Ctr Support Bearng (Part No.BEM0039P)

Drive Shaft-Ctr Support Bearng

from

$13.99
Drive Shaft-Ctr Support Bearng

Rein – Driveshaft Boot (Part No.BKD0066R)

Driveshaft Boot

from

$6.29
Boot kits protect a joint in the car that would be destroyed by dirt, sand and other particles if left exposed, even under normal conditions so it’s important that they be properly maintained and in good condition. Rein Automotive provides application specific driveshaft boot kits that come guaranteed to fit the first time.
See More

Dorman – Driveshaft (Part No.K10002533143DOR)

Driveshaft

from

$1553.50
Driveshaft

Dorman – Rear Drive Shaft: Greaseable, Adjustable (Part No.946-190)

Rear Drive Shaft: Greaseable, Adjustable

from

$1003.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle.
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Dorman – Rear Drive Shaft: Adjustable (Part No.976-308)

Rear Drive Shaft: Adjustable

from

$884.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle.
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

GKN Drivetech – Axle Assembly (Part No.K4000436282GKN)

Axle Assembly

from

$848.27
Axle Assembly

Cardone – Drive Shaft: Not Greasable, Direct Replacement (Part No.65-9000)

Drive Shaft: Not Greasable, Direct Replacement

from

$812.99
CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100% dynamically balanced, resulting in vibration-free performance at all speeds.

Product Features:
  • Built to match O.E. form, fit and function.
  • 100% NEW universal joints are installed to ensure proper fit and optimal performance.
  • All slip yokes are lubricated to prevent premature wear.
  • Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.
See More

Autopart International Inc – Driveshaft (Part No.K10001975890API)

Driveshaft

from

$380.91
Driveshaft

Autopart International Inc – Axle Assembly (Part No.K40003009305API)

Axle Assembly

from

$283.25
Axle Assembly

Cardone – Drive Shaft: Greasable, Direct Replacement (Part No.65-9001)

Drive Shaft: Greasable, Direct Replacement

from

$245.99
CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100% dynamically balanced, resulting in vibration-free performance at all speeds.

Product Features:
  • Built to match O.E. form, fit and function.
  • 100% NEW universal joints are installed to ensure proper fit and optimal performance.
  • All slip yokes are lubricated to prevent premature wear.
  • Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.
See More

Autopart International Inc – Axle Assembly (Part No.K40003009338API)

Axle Assembly

from

$195.19
Axle Assembly

Vaico – Driveshaft Support (Part No.K1030294678VCO)

Driveshaft Support

from

$96.97
Driveshaft Support

Worldpac – CENTERING SLEEVE (Part No.K1070569198FEB)

CENTERING SLEEVE

from

$85.00
CENTERING SLEEVE

Corteco – Centering Sleeve (Part No.K1070569198CFW)

Centering Sleeve

from

$54.15
Centering Sleeve

Corteco – Centering Sleeve (Part No.K107027028CFW)

Centering Sleeve

from

$48.00
Centering Sleeve

SKF – Drive Shaft Support Bearing (Part No.K1040100111SKF)

Drive Shaft Support Bearing

from

$43.52
Rugged SKF drive shaft support bearings are built to meet or exceed OE specifications. The Support Bearings are also built on the years of experience that SKF has earned designing and supplying bearings to the world’s largest OE manufacturers. Engineered and manufactured to specific application requirements that deliver precise drive shaft alignment and support. Center support bearings are pre-lubricated and sealed with metal reinforced seals to prevent contamination. Rubber support cushions are manufactured from durable rubber compounds that provide maximum support while isolating the driveline shaft from damaging vibration. Drive shaft support frames are constructed from high quality steel or aluminum that provides additional strength and long life in harsh environments.

Product Features:
  • Original equipment design and quality
  • Utilizes OE equivalent or better materials
  • Pre-Lubricated and reinforced seals
  • Rubber support cushions are manufactured from durable rubber compounds
  • Support frames are constructed from high quality steel or aluminum
See More

FAG US – BEARING (Part No.6006-2RSR)

BEARING

from

$15.49
BEARING

Most Popular 2008 Mercedes-Benz C300 Differentials

Customize your Mercedes-Benz with 4 Differentials products like Differential Oil, Differential Pinion Seals, and Differential Seals, all priced under $20.34.

Idemitsu – Type TLS Automatic Transmission Fluid – 1 qt (Part No.10106-042K)

Type TLS Automatic Transmission Fluid - 1 qt

from

$11.79
Formulated to meet the specific requirements of Toyota, Lexus, and scion vehicles equipped with conventional (non-CVT) transmissions that require the use of ATF T-IV. Recommended for service-fill in all Toyota, Lexus, and Scion automatic transmissions where ATF T-IV is specified. Fuel economy demands and more sophisticated electronic controls have made automatic transmissions not only more complex, but also unique to each vehicle manufacturer. Long gone are the days of having just a couple choices of automatic transmission fluid type. IDEMITSU is the factory fill Automatic Transmission Fluid (ATF) supplier to most Asian imports. IDEMITSU application-specific ATF products match the exact friction materials and performance requirements of each different vehicle model for which they are made.

Product Features:
  • Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
  • Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
  • Provides superior cleanliness, maintaining the transmission free of sludge and varnish deposits
  • Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
  • Advanced anti-wear technology provides maximum protection to gears and bearings
  • Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
See More

Corteco – Pinion Seal (Part No.J7010247118CFW)

Pinion Seal

from

$20.34
Pinion Seal

Worldpac – DRIVE AXLE SEAL (Part No.J7043247119CRP)

DRIVE AXLE SEAL

from

$19.50
DRIVE AXLE SEAL

Elring – Pinion Shaft Nut (Part No.J70301324405ELR)

Pinion Shaft Nut

from

$2.07
Pinion Shaft Nut

Top Picks for 2008 Mercedes-Benz C300 CV Axles and Joints

Upgrade Mercedes-Benz C300s with top-quality CV Axles and Joints parts, including 5 OEM and aftermarket selections for your 2008 model.

Febi – CV Joint Boot Kit (Part No.K6010552138FEB)

CV Joint Boot Kit

from

$79.15
With Clamps and Grease The Febi CV Joint Boot Kit is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

GKN Drivetech – CV Boot Kit (Part No.K6010294989GKN)

CV Boot Kit

from

$73.16
CV Boot Kit

Febi – CV Boot Kit (Part No.K6010321768FEB)

CV Boot Kit

from

$68.30
CV Boot Kit

GKN Drivetech – CV Boot Kit (Part No.K6010321652GKN)

CV Boot Kit

from

$67.65
CV Boot Kit

Beck/Arnley – Cu Boot Kit (Part No.103-2938)

Cu Boot Kit

from

$25.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • One piece neoprene boot
  • Kit complete with boot, grease, and hardware for complete installation
  • Hardware matches original design requirements
  • Application specific for this vehicle
See More

In-Demand Transfer Cases for 2008 Mercedes-Benz C300s

Select from 1 premium Transfer Cases parts for your 2008 Mercedes-Benz C300.

Corteco – Trans Case Output Sh (Part No.J71211338291CFW)

Trans Case Output Sh

from

$8.49
Trans Case Output Sh

Top-Rated Drivetrains Brands For Your 2008 Mercedes-Benz C300

Shop for the best-rated brands offering Drivetrains and other products for your 2008 Mercedes-Benz C300s. Below you’ll find some of our best rated Drivetrains from Idemitsu and National, and more. Drivetrains from these brands that fit a 2008 C300 start at just $11.79 and are rated as high as 5 stars. OEM and aftermarket Drivetrains don’t get more top quality, durable, and affordable than from the brands below.

Popular Idemitsu 2008 Mercedes-Benz C300 Drivetrains

When it comes to maintaining or upgrading your 2008 Mercedes-Benz C300, using quality Drivetrains is essential to ensure durability and a perfect fit. Idemitsu ticks all of those boxes. We offer a wide selection of Idemitsu Drivetrains, specifically designed for the 2008 Mercedes-Benz C300. With over 1 Idemitsu brand Drivetrains in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $11.79. Plus, with over 2 customer reviews and an average rating of 5 stars, you can trust that our Idemitsu Drivetrains will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Type TLS Automatic Transmission Fluid - 1 qt
from
$11.79

(2)

Type TLS Automatic Transmission Fluid – 1 qt

“Good product. Will buy again.”

Popular National 2008 Mercedes-Benz C300 Drivetrains

National auto parts is one of the highest quality Drivetrain brands in the market. Any 2008 Mercedes-Benz C300 owner should feel confident when installing genuine National parts in their vehicle. To ensure the best fit and performance for your 2008 C300, Advance Auto Parts carries a full inventory of 3 National Drivetrains. Plus you will be keeping your Mercedes-Benz in peak condition while saving money because prices on these National Drivetrains range from $15.99 to $41.49, plus, with more than 8 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Drivetrains below will deliver on both quality and value.

Bearings
from
$15.99

(7)

Bearings

“Comparable with the Timkens I removed. NATIONAL bearings have lasted decades in many of my other machines.”

Bearings
from
$41.49
This product is not rated

Bearings

“”

Shaft Repair Sleeve
from
$39.49

(1)

Shaft Repair Sleeve

“Easy to use, too early to tell how long it will last. It did stop the oil leak with a new oil seal on the front crankshaft pulley. 87 mercedes 300td.”

FAQs for 2008 Mercedes-Benz C300 Drivetrains

Which Drivetrains are best-sellers for 2008 Mercedes-Benz C300s?

Out of 33 Drivetrains that fit 2008 Mercedes-Benz C300s, the following parts are the top sellers:

What’s the price range for 2008 Mercedes-Benz C300 Drivetrains?

Drivetrain prices for the 2008 Mercedes-Benz C300 start at $2.07 and go up to $1,553.50 for the most premium parts.

What’s the average price of a Drivetrain for a 2008 Mercedes-Benz C300?

The average price for Drivetrains for the 2008 Mercedes-Benz C300 is $181.66. Keep in mind the variety of part types within our Drivetrain category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Drivetrains for other Mercedes-Benz C300 model years?

Yes, we currently carry Drivetrains for 15 model years of Mercedes-Benz C300s between 2009 and 2023. Drivetrains are bought most frequently for the following model years: 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015, and 2014.

What are the cheapest Drivetrains for my 2008 Mercedes-Benz C300?

The cheapest 2008 Mercedes-Benz C300 Drivetrains we carry in stock are:

What are the top-rated Drivetrains that fit the 2008 Mercedes-Benz C300?

Out of 36 reviews by customers, our 2008 Mercedes-Benz C300 Drivetrains have an average customer rating of . These are some of the highest-rated Drivetrain types for the 2008 Mercedes-Benz C300 and their top-rated products:

What types of Drivetrains do you sell for my 2008 Mercedes-Benz C300?

Can I get help with 2008 Mercedes-Benz C300 Drivetrain orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Mercedes-Benz Drivetrains and more.

What is your return policy for Mercedes-Benz C300 Drivetrains?

Advance Auto Parts keeps returns simple. For new Mercedes-Benz C300 Drivetrains and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.