2008 Mazda 5 Belts and Hoses

Essential 2008 Mazda 5 Belts and Hoses

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 14 1/2 Inch Length (Part No.87866)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 14 1/2 Inch Length

from

$28.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 24 Inch Length (Part No.80404)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 24 Inch Length

from

$18.79
Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • Meets Type EC electro-chemical requirements as specified in SAE J1684
See More

Litens – Serpentine Belt Tensioner: 1 Piece (Part No.999186A)

Serpentine Belt Tensioner: 1 Piece

from

$184.99
This Litens belt tensioner is supplied by the original equipment tensioner supplier and meets all form, fit, and performance characteristics of the original equipment part (with the exception of not having the car manufacturer’s logo or part number applied to the part). As with the original equipment part, this replacement tensioner is manufactured in Canada to meet Mazda’s specifications. The Litens replacement part maintains the heavy duty steel pulley, round spring technology and the specified internal damping components. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket._

Product Features:
  • Manufactured by the original equipment part supplier to ensure proper form, fit and performance
  • Internal “round spring” technology to provide constant belt tension and alignment throughout its service life. The internal damping design provides quiet, smooth, system performance.
  • Installation instructions included.
  • Durable Steel Pulley for long service life and performance.
  • Professional Mechanics will change this tensioner in about 1 hour.
  • Due to the fact that belts and tensioners have similar Original Equipment “design life targets”, it is often a best practice to replace the belt tensioner when replacing a worn or broken belt. Belt removal is required to change the tensioner. Therefore, d
See More

Litens – Serpentine Belt Tensioner: 1 Piece (Part No.999420A)

Serpentine Belt Tensioner: 1 Piece

from

$197.99
This Litens belt tensioner is manufactured by the original equipment tensioner supplier to Mazda and meets all form, fit, and performance characteristics of the original equipment part (with the exception of not having the car manufacturer’s logo or part number applied to the part). This tensioner maintains the original damping characteristics and tension rate specified by the original equipment manufacturer. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket._

Product Features:
  • Manufactured by the original equipment part supplier to ensure proper form, fit and performance
  • Internal “round spring” technology to provide constant belt tension and alignment throughout its service life. The internal damping design provides quiet, smooth, system performance.
  • Installation instructions included.
  • Heavy Duty Polymer pulley
  • Professional Mechanics will change this tensioner in about 1 hour.
  • Due to the fact that belts and tensioners have similar Original Equipment “design life targets”, it is often a best practice to replace the belt tensioner when replacing a worn or broken belt. Belt removal is required to change the tensioner. Therefore, d
See More

Litens – O.E Quality Idler/Tensioner Pulley: Direct Fit, Steel, 70 mm Diameter (Part No.900485A)

O.E Quality Idler/Tensioner Pulley: Direct Fit, Steel, 70 mm Diameter

from

$49.49
This pulley is supplied by Litens Automotive – inventor of the first automatic belt tensioner in 1979 and today the world’s largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material, tolerances, and specifications. The part meets all performance and durability requirements. Fits automotive applications including Mazda6. Comes complete with new bolt, dust shield, and spacer. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket._

Product Features:
  • Manufactured by one of the world’s largest Original Equipment suppliers of accessory drive tensioners and pulleys
  • Heavy Duty Steel Pulley
  • Precision steel stamping with close tolerance ball bearing pocket.
  • Electro-deposited coating (e-coat) for superior corrosion resistance.
  • Running surface designed and engineered for proper belt tracking.
See More

Litens – O.E Quality Idler/Tensioner Pulley: Direct Fit, Steel, 75 mm Diameter (Part No.900631A)

O.E Quality Idler/Tensioner Pulley: Direct Fit, Steel, 75 mm Diameter

from

$268.99
This Litens pulley is manufactured by one of the largest original equipment pulley suppliers to ensure proper fit and performance. This pulley is produced for serpentine belt routing applications and is made of high strength steel for improved life and durability. This pulley conforms to original equipment material, tolerances, and specifications. This part fits 2010-2014 Mazda 3,5 with 2.0/2.3/2.5L (Idler Pulley – Grooved with bracket). This part comes with an aluminum bracket, installation bolt and dust shield. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More

Dayco – Serpentine Idler/Tensioner Pulley; Polymer, 70mm Dia., 28.3mm Width, 6 Grooves (Part No.89015)

Serpentine Idler/Tensioner Pulley; Polymer, 70mm Dia., 28.3mm Width, 6 Grooves

from

$31.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:
  • Designed for the majority of automotive vehicle applications on the road today
  • High-quality materials help resist wear and improve belt life
  • Features premium lubricated bearings to extend service life
  • Meets or exceeds OE quality
See More

Gates – Stretch Fit« Micro-V« Serpentine Drive Belt (Part No.K050264SF)

Stretch Fit« Micro-V« Serpentine Drive Belt

from

$32.99
Stretch Fit Drive Systems Demand Highly Engineered Solutions.

Product Features:
  • Specially formulated adhesive literally locks onto the cord, allowing the cord to elongate and stretch, but never lose tension
  • Gates engineered tensile cord has the needed combination of strength and flexibility using advanced polyamide tensile cord
  • Patented highly engineered EPDM belt ribs are extremely resistant to contamination, wear and pilling
  • NOTE: Stretch Fit belts are single-use only and must be replaced if removed
See More

Dayco – Stretch Serpentine Belt: 26.5 "Long, 5 Rib Count, Engineered For High Mileage (Part No.E050265)

Stretch Serpentine Belt: 26.5 "Long, 5 Rib Count, Engineered For High Mileage

from

$26.99
Dayco ela (elastic) or stretch belts are specifically designed for two, three, and four point drives that are designed to use self-tensioning belts. Although these belts may look like standard poly rib belts, they are very different. These specially designed elastic belts have self-tensioning capabilities required by specific OE drives. Vehicles that are manufactured with stretch belts must replace them with stretch belts. These belts are not interchangeable with standard constructed belts of their same size. Dayco ela belts utilize a proprietary EPDM construction that is designed to elongate over the fixed pulley system, and then maintain the required belt tension over the life of the belt. The backbone behind the Dayco ela belt is its specially developed polyamide tensile member, which allows for high elongation required for installation, yet provides the proper tension maintenance properties to transmit the accessory loads demanded for the drive. This belt construction incorporates a wear resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion and flexibility to maintain lasting performance. Stretch belts have unique installation instructions depending on the OE application. Installation may require a specialized tool for the application or a simple zip tie. Do not attempt to install by prying the belt on the pulleys. Dayco provides detailed instructions on the reverse side of the sleeve.

Product Features:
  • Utilizes a proprietary EPDM construction that is designed to elongate over the fixed pulley system, and then maintain the required belt tension over the life of the belt
  • Specially developed polyamide tensile member, which allows for high elongation required for installation, yet provides the proper tension maintenance properties to transmit the accessory loads demanded for the drive
  • Incorporates a wear resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion and flexibility to maintain lasting performance
  • These specially designed elastic belts have self-tensioning capabilities required by specific OE drives designed for a stretch belt
See More

Driveworks – Poly Rib Belt Serpentine Belt; 90 Long, 6 Rib Count (Part No.900K6)

Poly Rib Belt Serpentine Belt; 90 Long, 6 Rib Count

from

$27.49
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
See More

ContiTech – Multi Rib (Serpentine) Belt (Part No.W1000140828CON)

Multi Rib (Serpentine) Belt

from

$24.51
ContiTech Serpentine Belts come in a wide range of sizes and are designed to be oil-resistant and temperature-stable from -22F to 176F (-30C to 80C). ContiTech Serpentine Belts deliver 98% power efficiency. While a lower profile design easily handles higher engine revs, reducing noise and providing cooler running temperatures. High performance construction features include polychloroprene rubber cover and body, polyester fiber tensile members, and a ribbed belt design. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
  • Temperature-stable from -22F to 176F (30C to 80C).
  • Delivers over 98% power efficiency.
  • High performance construction.
  • Polychloroprene rubber cover and body.
  • Polyester fiber tensile members and a ribbed belt design.
See More

Hutchinson – Drive Belt (Part No.W1000459595HUT)

Drive Belt

from

$34.53
Drive Belt

Hutchinson – Stretch Poly Rib Serpentine Belt (Part No.W1000467496HUT)

Stretch Poly Rib Serpentine Belt

from

$17.45
Hutchinson stretch belts, are specifically designed for 2 to 4 point drives that do not require tensioning. Although these belts may look like standard poly rib belts, they are very different. These specially designed belts have self-tensioning capabilities required by specific original equipment (OE) drives designed for a “stretch” belt. Vehicles that are manufactured with “stretch” belts must replace those belts with “stretch” belts. These belts are not interchangeable with standard constructed belts of the same size. This belt construction incorporates a wear resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion and flexibility to maintain lasting performance. “Stretch” belts have unique installation instructions depending on the OE application. Installation may require a specialized tool for the application or a simple zip tie. Do not attempt to install by prying the belt on the pulleys. Dayco provides detailed instructions on the reverse side of the sleeve. Dismounting and reusing stretch belts is not recommended. A new belt should be installed anytime one is removed.

Product Features:
  • Wear resistant EPDM rib material
  • Highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord
  • Designed to elongate over the fixed pulley system
  • Provides the proper tension maintenance
See More

Gates – Breather Hose (Part No.B20101064650GAT)

Breather Hose

from

$45.43
Breather Hose

Dorman – Help – PCV Hose Kit (Part No.46034)

PCV Hose Kit

from

$34.99
Proper crankcase ventilation is key to smooth performance and engine longevity. Made from quality materials to resist cracking and brittleness, this PCV hose replaces a worn or leaking original equipment hose.

Product Features:
  • Ideal replacement – this PCV tubing replaces the original tubing on specified vehicle years, makes and models
  • Durable materials – this PCV tubing is designed to withstand exposure to extreme temperatures and oil vapors to resist cracking and leaking
  • Cost-effective solution – offers original equipment quality at a competitive price
  • Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 17.5" Long, 1.22" Diameter (Part No.E72313)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 17.5" Long, 1.22" Diameter

from

$17.49
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Suncore – Shock Kit (Part No.2-12S259020-001)

Shock Kit

from

$56.99
Shock Kit

Dayco – Radiator Hose (Part No.E73035)

Radiator Hose

from

$75.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

MacKay – MacKay Radiator Hose (Part No.G2000457696MKY)

MacKay Radiator Hose

from

$22.79
MacKay utilizes leading edge rubber technology and compounds, supported by in-house processes from rubber mixing to final product. This ensures hoses are made to the strict specifications required for the advanced motor vehicles of the 21st century. In vehicles of today, a hose has to be designed to withstand the stresses of modern, more compact but powerful engines that run hotter and at a higher pressure. Other factors include smaller engine compartments with poor heat dissipation, aggressive coolant additives, and stray (electrochemical) current that may be conducting through the cooling system. In short, the smaller but more powerful engines of today work a lot harder than the larger engines that were standard before. More heat is generated, higher burst pressures are required in cooling system components, and hoses have to be made tougher to withstand these demands. MacKay’s research and development chemists have developed new rubber formulations and manufacturing processes that ensure MacKay hoses meet the greater wear and heat demands created by modern engines. Rubber compounds used in automotive hoses today are predominantly synthetic rubber formulation. All MacKay coolant hoses are made from EPDM compounds that are highly resistant to ozone attack. Hoses made from some other rubber compounds may be subject to ozone deterioration.

Product Features:
  • Excellent resistance to high temperatures
  • Resists chemical attack (oils, fuels etc.)
  • Excellent Ozone resistance
  • Good resistance to abrasion
  • High resistance to vibration
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 11" Long, 1.25" Diameter (Part No.C72872)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 11" Long, 1.25" Diameter

from

$21.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 5 Inch Length (Part No.88371)

Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 5 Inch Length

from

$15.79
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 13.5" Long, 1.19" Diameter (Part No.D73034)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 13.5" Long, 1.19" Diameter

from

$30.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

2008 Mazda 5 Belts and Hoses

You count on your 2008 Mazda 5 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Belts and Hoses. With 19 Belts and Hoses ranging in price from $15.79 to $184.99, you’re sure to find everything you need for your 2008 Mazda 5.

Brands matter. If you want to shop a specific Belts and Hoses brand, we stock 9 different brands like Dayco, Dorman, and Litens. 2008 Mazda 5 Belts and Hoses start as low as $15.79!

One of the best ways to find top quality OEM or aftermarket Belts and Hoses is by asking professionals. Short of that, you can shop with confidence thanks to our 366 extensive product reviews on 2008 Mazda 5 Belts and Hoses. Some of the top-rated Belts and Hoses products we carry are Poly Rib Belt Serpentine Belt; 52 Long, 6 Rib Count with 4.0 stars.

Did we mention you can order your Belts and Hoses from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Belts and Hoses inventory for your 2008 Mazda 5 below to get started!

Top-Rated Belts and Hoses Brands For Your 2008 Mazda 5

Trusted Belts and Hoses OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2008 Mazda 5 running right for years to come. In our inventory you’ll find brands like Dayco, Dorman, Litens, and even more.

Popular Litens Belts and Hoses

You’ll find popular Litens brand products across Belt Tensioners. All are waiting to get your 2008 Mazda 5 back on the road. Some of the top-rated Litens products in these categories are:
Serpentine Belt Tensioner: 1 Piece
from $184.99
(4)
Serpentine Belt Tensioner: 1 Piece
Belt Tensioner Assemblies

Top-Rated Dayco Belts and Hoses


If Dayco are what you’re looking for, our inventory holds plenty. We stock Dayco brand Belts and Hoses for your 2008 Mazda 5, and some of our most reviewed Dayco parts include:
Poly Rib Belt Serpentine Belt; 52 Long, 6 Rib Count
from $29.99
(15)
Poly Rib Belt Serpentine Belt; 52 Long, 6 Rib Count
Serpentine Belts

FAQs for 2008 Mazda 5 Belts and Hoses

What are the most purchased Belts and Hoses for the 2008 Mazda 5?

Out of 19 Belts and Hoses for the 2008 Mazda 5, the most popular in our inventory are:
PCV Hose Kit
from $34.99
(2)
PCV Hose Kit
PCV Hoses

What are the top-rated 2008 Mazda 5 Belts and Hoses?

Top-rated Belts and Hoses for your 2008 Mazda 5 based on customer reviews/ratings are:
Poly Rib Belt Serpentine Belt; 52 Long, 6 Rib Count
from $18.79
(1)
Poly Rib Belt Serpentine Belt; 52 Long, 6 Rib Count
“I will not install this belts until the weather gets better, I just took advantage of the special and will install once the weather is warmer”