2008 Kia Amanti Air Flow Sensors
More 2008 Kia Amanti Air Flow Sensors
Find your specific 2008 Kia Amanti original or aftermarket Air Flow Sensors below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 2008 Kia Amanti Air Flow Sensors
Carquest Premium – Manifold Absolute Pressure Sensor (MAP) (Part No.ECE1169)
from
$74.99
CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.
Product Features:
See More
Product Features:
- CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
- CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
- CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.
Walker – Walker Oxygen Sensor (Part No.C5010380919WKR)
from
$79.89
Walker Oxygen Sensors are precision made for outstanding performance and manufactured to meet and exceed all original equipment specification and test requirements.
Product Features:
See More
Product Features:
- Improved Engine Response and Performance
- Lower Emissions
- Improved Fuel Economy
- Longer Sensor Life
- Meets OEM Specifications Installation Notes: Vehicles equipped with Air Fuel Ratio Sensors may look very similar to the Oxygen Sensor. Please confirm the correct part before ordering and if the connector does not match, do not install
Walker – Walker Oxygen Sensor (Part No.C5010380920WKR)
from
$81.43
Walker Oxygen Sensors are precision made for outstanding performance and manufactured to meet and exceed all original equipment specification and test requirements.
Product Features:
See More
Product Features:
- Improved Engine Response and Performance
- Lower Emissions
- Improved Fuel Economy
- Longer Sensor Life
- Meets OEM Specifications Installation Notes: Vehicles equipped with Air Fuel Ratio Sensors may look very similar to the Oxygen Sensor. Please confirm the correct part before ordering and if the connector does not match, do not install
Bosch – Oxygen Sensor (Part No.C5010185213BOS)
from
$123.76
The Bosch oxygen sensor utilizes a mix of zirconium and yttrium oxides and other elements to form a tough base that withstands the intense stress to which oxygen sensors are subjected. Each element is incredibly strong for best-in-class performance and maximum service life.
Product Features:
See More
Product Features:
- OE-Equivalent.
- Direct fit for easy installation.
- OE Style connectors and wire lengths.
- Base ceramic probe of Zirconium and Yttrium.
- Patented Platinum Power Grid.
Bosch – Oxygen Sensor (Part No.C50101453106BOS)
from
$65.48
Oxygen Sensor
NTK – NTK Oxygen Sensor (Part No.C5010299290NTK)
from
$93.44
NTK is the world’s largest supplier and manufacturer of original equipment oxygen sensors. NTK oxygen sensors meet or exceed original equipment specifications and are equipped with waterproof factory fitted connectors to ensure a perfect fit every time. Every NTK oxygen sensor is individually tested to ensure the highest level of quality and reliability.
Product Features:
See More
Product Features:
- OE-Equivalent.
- Direct fit for easy installation.
- Extensively Tested During Manufacture to Guarantee Quality and Reliability
- Supplied With a Factory-Fitted OEM Connector for Easy Installation
DENSO – First Time Fit Oxygen Sensor (Part No.C5010374938ND)
from
$129.92
Denso First Time Fit oxygen sensors are constructed of the highest quality materials available. High-quality stainless steel, porous polytetrafluoroethylene (PTFE), fluorine rubber, aluminum oxide, high-grade platinum and ceramics are used in each DENSO sensor.
Product Features:
See More
Product Features:
- SUPERIOR DESIGN – Maximizes engine performance and fuel efficiency while reducing harmful emissions.
- DOUBLE-PROTECTION COVER – Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
- ALUMINUM-OXIDE TRAP LAYER – Keeps silicone and lead outside the ceramic element through DENSO’s exclusive design, preventing damage to the platinum electrode.
- STAINLESS STEEL HOUSING – Resists corrosion and contamination with a rugged, watertight body.
Carquest Premium – Ambient Air Temperature Sensor (Part No.WTA1336)
from
$47.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
FAE – MAP Sensor (Part No.C7044179999FAE)
from
$89.47
The FAE MAP sensor, absolute pressure of admission, detects the air pressure at the inlet of the vehicle and turns it into an electrical signal which is sent to the engine’s electronic control unit (ECU) in order to regulate the stoichiometric mixture. Some models do have a NTC type temperature sensor that allows the MAP to detect, not only the pressure, but also the air temperature at the inlet. This information is necessary for the ECU to calculate the mass of intake air in order to be able to adjust the air-fuel mixture. The sensor element of the MAP is a piezoresistive type configured as a Wheatstone bridge, – its electrical resistance varies according to the mechanical de- formation of a membrane.
Product Features:
See More
Product Features:
- The sensor element is integrated in a MEMS-type DIE which amplifies, performs a thermal compensation and conditions the signal
- The incorporated digital electronics allow us to program the output signal
- The DIE is mounted on a ceramic circuit and its electrical connections are made by bonding
- Protected with a receptacle and a silicone gel
- The electronic circuit is achieved through hybrid technology and is handled in a clean room due to its sensitive nature.
Carquest Premium – Barometric Pressure Sensor Connector (Part No.PTA1104)
from
$21.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Popular 2008 Kia Amanti Air Flow Sensors Categories
2008 Kia Amanti Air Flow Sensors
Maybe you’re in the middle of a full rebuild of that 2008 Kia Amanti. Maybe you just need a couple of Air Flow Sensors. Either way, Advance Auto Parts has 9 different Air Flow Sensors in our inventory ranging from $21.99 to $129.92. That means you can find the exact parts or products you need to keep that 2008 Kia Amanti running smoothly.
Air Flow Sensors are only as good as their brand. We stock 6 different brands to make sure you have plenty of trusted parts to choose from for your 2008 Kia Amanti. Carquest Premium, Walker, and Bosch are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Air Flow Sensors for your 2008 Kia Amanti, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Air Flow Sensors to keep your 2008 Kia Amanti rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Air Flow Sensors Brands To Make Your 2008 Kia Amanti Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 2008 Kia Amanti demands trusted brand parts and products to keep it running. Many trusted brands of Air Flow Sensors make up Advance Auto Parts’ inventory, and all are ready to help make your Amanti the best it can be. Be sure to browse some of our top Air Flow Sensors brands and parts.
FAQs for 2008 Kia Amanti Air Flow Sensors
What are the most purchased Air Flow Sensors for the 2008 Kia Amanti?
Out of 9 Air Flow Sensors for the 2008 Kia Amanti, the most popular in our inventory are:
from
$21.99
This product is not rated
Barometric Pressure Sensor Connector
Mass Air Flow Sensor Connectors
from
$74.99
This product is not rated
Manifold Absolute Pressure Sensor (MAP)
MAP-Barometric Pressures
