2008 Jeep Compass Drivetrains

Below you will find various in-demand Jeep Drivetrains, components and accessories for your 2008 Compass. Advance Auto Parts has popular Compass parts like Differentials, Transfer Cases, Drive Shafts and Axles and more. You’ll also find aftermarket and OEM Drivetrains for other Compass model years including 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021 and more. Select a category of 2008 Jeep Compass Drivetrains below and start saving instantly.

Popular 2008 Jeep Compass Drivetrains Categories

Differential Oil

U-Joints

Drive Shaft and Axles

Rear Differential Cover Gaskets

U-Joint Strap Kits

Differential Pinion Shaft Lock Bolts

Differential Mounts

Drive and Prop Shaft Assemblies

Differential Bearings

Bearing Pullers

Axle Shaft Seals

Drive Shaft Slip Yoke Sleeves

Differential Pinion Pilot Bearings

U-Joint Centering Yokes

Axle Shaft Bearings

Transfer Case Output Shaft Seals

Differential Bearing Kits

Front Differential Pinion Bearings

Differential Spider Gear Kits

Differential Rebuild Kits

Differential Carrier Shim Kits

Differential Pinion Seals

Differential Ring and Pinions

Differential End Yokes

Spindle Lock Nuts

Drive Shaft Repair Kits

Transfer Case Shifter Shaft Washers

Differential Carrier Bearings

Axle Nuts

Axle Shaft Seal Retainers

Differential Seals

Differential Drain Plugs

Differential Ring Gear Bolts

Bearing Race Drivers

Spindle Retainers

Differential Crush Sleeves

Pinion Shaft Seals

Differential Side Bearing Spacers

Differential Pinion Shims

Differential Pinion Shaft Nuts

Differential Cross Pins

Differential Pinion Gear Thrust Washers

Spindle Washers

Universal Joint Strap Bolts

Essential Drivetrains for 2008 Jeep Compasses

from

$11.49

SHAFT SEAL

from

$8.99

Ring gear bolt for C200F front and ’05 7 up Chrysler 8.25″ rear.

Product Features:

Ring gear bolt for 2005 and up Chrysler 8.25″

from

$3.29

This spindle nut washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this spindle nut washer matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$60.99

The purpose of the mount is to support the driveline on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. The Differential Mounts prevents driveline rocking. Each part is engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to DODGE 07-08; JEEP 07-17;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
For Years: 2007-2017
Weight approx: 2 Lbs

from

$14.49

Formulated to meet the specific requirements of Toyota, Lexus, and Scion vehicles equipped with conventional (non-CVT) transmissions that require the use of Toyota ATF WS. Recommended for service-fill in all Toyota, Lexus, and Scion automatic transmissions where ATF WS is specified. Fuel economy demands and more sophisticated electronic controls have made automatic transmissions not only more complex, but also unique to each vehicle manufacturer. Long gone are the days of having just a couple choices of automatic transmission fluid type. IDEMITSU is the factory fill Automatic Transmission Fluid (ATF) supplier to most Asian imports. IDEMITSU application-specific ATF products match the exact friction materials and performance requirements of each different vehicle model for which they are made.

Product Features:

Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
Optimized viscosity and advanced friction reducing additive technology provide exceptional fuel economy performance
Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
Exceptional wear protection of gears and bearings
Provides superior deposit control and protects metal surfaces from rust and corrosion
Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking

from

$57.99

Cross pin shaft for 8.25″ Chrysler.

Product Features:

Cross pin shaft for Chrysler 8.25″
Fits standard open differentials only

from

$27.99

8.25″ IFS, 8.5″, 12P, 7.5″ F, 8.8″ F, 8.25″ Chrysler pinion shim kit.

Product Features:

Pinion depth shims for GM 8.25″ IFS, 8.5″, 8.6″, 12 bolt passenger car, Ford 7.5″ and 8.8″, Chrysler 8.25″

from

$26.49

Trans Case Seal

from

$315.99

Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), Thread locking compound, marking compound with brush, and gasket. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application.

Product Features:

Fits 2005 and up Chrysler 8.25″
Included are Timken bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve , thread locker, marking compound with brush, and gasket.

from

$579.99

Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

Product Features:

Fits 2004 and down Chrysler 8.25″
3.07 ratio
10 bolt holes
27 spline pinion

from

$51.99

This drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

Direct replacement – this drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicle.
Ideal solution – this kit is a reliable replacement for original components that have failed due to fatigue.
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$10.79

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$3.35

The EMPI Axle Shaft Nut is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium aftermarket replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$226.99

Yukon yoke for Chrysler 7.25″ and 8.25″ with a 1310 U/joint size. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits Chrysler 7.25″ and 8.25″
27 spline
1310 u-joint size
Outside snap ring design
3.219″ snap ring span
1.062″ cap diameter
Strap style

from

$49.99

7260 U/joint strap, Small Chrysler w/ bolts, 7.25, 8.25, 8.75, 9.25.

Product Features:

u-joint strap kit
Fits Chrysler 7.25″, 8.25″ 8.75″ and 9.25″ rear
7260 u-joint size
Includes two straps and four bolts

from

$115.99

7.25″ & 8.25″ Chrysler REDI sleeve.Yukon Mighty seal.

Product Features:

Pinion Redi-sleeve
Fits Chrylser 7.25″ and 8.25″

from

$57.99

1310 Yukon Lifetime U/joint. 1.718″ snap ring span, 1.062″ cap diameter. Inside snap ring.

from

$11.29

This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.

Product Features:

Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles
Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$612.99

CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100% dynamically balanced, resulting in vibration-free performance at all speeds.

Product Features:

Built to match O.E. form, fit and function.
100% NEW universal joints are installed to ensure proper fit and optimal performance.
All slip yokes are lubricated to prevent premature wear.
Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.

from

$3.99

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

Leading Manufacturer Of Quality Replacement Parts For Jeep
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Improve The Performance
Easy Installation

from

$10.99

Crush Sleeve for Model 35, Chrysler 7.25″, 8.25″ Ford 8″ & GM 7.75″. Approx 0.495″ long.

Product Features:

Crush sleeve for AMC Model 35, Chrysler 7.25″ and 8.25″, Ford 8″ and GM 7.75″
0.495″ tall

from

$34.99

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$8.99

C/Clip for Chrysler 8.25″, Ford 7.5″, 8.8″, GM 12 bolt car & truck, 8.2″, 8.5″ & 8.6″.

Product Features:

c-clip for Chrysler 8.25″, Ford 8.8″, GM 12 bolt car and truck and GM 8.2″, 8.5″ and 8.6″
.150″ thick

from

$9.32

Diff. Side Cover Sea

from

$15.99

Bolt/screw for adjuster lock for Chrysler 7.25″, 8.25″, 8.75″, 9.25″.

Product Features:

Side adjuster lock bolt
Fits Chrysler 7.25″, 8.25″, 8.75″ and 9.25″

from

$5.49

This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$6.99

Cross pin bolt for Chrysler 8.25″, 9.25″ rear, Ford 7.5″, 8.8″, GM 12 bolt car & truck, 7.2″ IFs, 7.5″, 7.6″, 8.0″, 8.25″ IFS & 8.5″.

Product Features:

Cross pin bolt for Chrysler 8.25″ and 9.25″ rear, Ford 7.5″ and 8.8″, GM 12 botl car and truck, 8.5″, 8.25″ IFS, 8.0″, 7.625″, 7.5″ and 7.2″ IFS

from

$205.99

Product Features:

CHRY 8.25″ INTERNAL KIT 29 SPLINES 1997 AND UP

Upgrade your 2008 Jeep Compass with Top-Quality Drivetrains

When it comes to maintaining or upgrading your 2008 Jeep Compass, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Jeep or enhancing its overall performance, Drivetrains are key to keeping your Compass functioning at its best. At Advance Auto Parts, we offer a wide selection of 92 Drivetrains for the 2008 Jeep Compass, designed to meet your needs without breaking the bank. From Differential replacements to Transfer Cases upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Drivetrains for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Drivetrains for your 2008 Jeep Compass at great prices. Our Drivetrains inventory for this model ranges from just $2.49 to $964.99, with an average price of $167.01. Our 92 Drivetrains in stock come from 17 trusted brands, so you’re sure to find the right part for your 2008 Jeep Compass without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2008 Jeep Compass, we stock popular OEM and aftermarket Drivetrains from top names like Valvoline, Driveworks, Carquest Premium, and more. Valvoline Drivetrains start at just $12.49 and boast an impressive 5 stars average rating from customers. Driveworks and Carquest Premium also bring quality to the table, with Drivetrains available starting at $6.79, and at an average 4 stars rating. With 642 customer reviews and counting, our 2008 Jeep Compass Drivetrains have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Drivetrain upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2008 Jeep Compass is always ready to roll. We’re committed to providing you with everything you need to keep your Compass in top shape, all in one place. Start shopping confidently below for your 2008 Jeep Compass!

Best-Selling Differentials for 2008 Jeep Compasses

Enhance the driving experience in your Jeep with 62 quality Differential components, starting at $2.49.

show more show less

from

$32.99

Valvoline High Performance Synthetic Gear Oil is the thermally stabile extreme pressure lubricant that offers outstanding protection for gearboxes and differentials in passenger cars, light trucks, and sport utility vehicles. Combined with high quality synthetic base oils, our formula’s superior additives help reliably safeguard against severe temperatures, shock loads, foaming, scuffing, scouring, corrosion and pitting in high load, high torque and high horsepower conditions. Can be used in conventional and limited slip hypoid differentials where GL-5 is specified as well as non-synchronized manual transmissions that require GL-4. Protect your gears with Valvoline, the #1 gear oil brand.

Product Features:

HIGH PERFORMANCE EXTREME-PRESSURE ADDITIVES HELP MINIMIZE WEAR in high pressure and high temperature conditions
EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION can easily handle both winter and summer conditions for dependable coverage and protection year-round
REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
FIGHTS CORROSION AND RUST with emulsifying agents and safeguards against impurities, oxidation and thermal breakdown
SUPERIOR ADDITIVES help reliably safeguard against severe temperatures, shock loads, foaming, scuffing, scouring, corrosion and pitting in high load, high torque and high horsepower conditions

from

$39.99

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$7.49

High-quality Differential Component Shim

Product Features:

SHIM KIT FITS-8.25-F7.5-AMC20-GM0

from

$2.49

Product Features:

CRUSH SLEEVE 7.25 & 8.25 MIN ORDER 5000

from

$10.79

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$37.49

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$8.49

Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.

from

$36.49

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Matched cup and cone components ensures consistent quality and outstanding performance
Industry leading coverage
Professional technicians know they can depend on National

from

$10.99

Crush Sleeve for Model 35, Chrysler 7.25″, 8.25″ Ford 8″ & GM 7.75″. Approx 0.495″ long.

Product Features:

Crush sleeve for AMC Model 35, Chrysler 7.25″ and 8.25″, Ford 8″ and GM 7.75″
0.495″ tall

from

$7.99

Product Features:

CHRY 8 3/4″ RING GEAR BOLTS C 8.25″

from

$6.79

This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug & help ensure a secure seal.

Product Features:

Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles.
Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$8.99

Ring gear bolt for C200F front and ’05 7 up Chrysler 8.25″ rear.

Product Features:

Ring gear bolt for 2005 and up Chrysler 8.25″

from

$27.99

8.25″ IFS, 8.5″, 12P, 7.5″ F, 8.8″ F, 8.25″ Chrysler pinion shim kit.

Product Features:

Pinion depth shims for GM 8.25″ IFS, 8.5″, 8.6″, 12 bolt passenger car, Ford 7.5″ and 8.8″, Chrysler 8.25″

from

$10.99

Pinion nut for Chrysler 7.25″, 8.0″ IFS, 8.25″, 8.75″ fine spline, 9.25″ front & rear, 7/16″ x 14.

Product Features:

Pinion nut for Chrysler 8.0″ IFS, 8.25″, 8.75″ with 29 spline pinion and 9.25″ rear
7/8″ x 14 thread

from

$26.99

Product Features:

Pinion nut
Fits Chrysler 7.25″, 8.0″, 8.25″, 9.25″ and 8.75″ with 29 spline pinion

from

$209.99

Product Features:

Spider gear kit
Fits Chrysler 8.25″ 29 spline open differential
Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.

from

$15.99

Bolt/screw for adjuster lock for Chrysler 7.25″, 8.25″, 8.75″, 9.25″.

Product Features:

Side adjuster lock bolt
Fits Chrysler 7.25″, 8.25″, 8.75″ and 9.25″

from

$78.99

Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for ’76 & up Chrysler 8.25″ rear.

Product Features:

Fits 1976 and up Chrysler 8.25″
Includes carrier bearings and races

from

$6.79

Product Features:

Brand may vary by location

from

$275.99

Product Features:

CHRY 10BLT 8.25+8.36 R&P-4.56 RATIO

from

$469.99

Ring/Pinion Sets

from

$288.99

Product Features:

CHRY 10BLT 8.25+8.36 R&P-3.55 RATIO

from

$60.99

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
For Years: 2007-2017
Weight approx: 2 Lbs

from

$60.99

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
For Years: 2007-2017
Weight approx: 2 Lbs

from

$26.99

8.25″ Chrysler pinion gear thrust washer.

Product Features:

Pinion gear thrust washer
Fits Chrysler 8.25″

from

$10.99

All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!

from

$11.29

Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles
Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$689.99

The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:

Carrier bearing puller
Works with an impact gun to safely and easliy remove carrrier bearings
Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications

from

$579.99

Fits 2004 and down Chrysler 8.25″
3.07 ratio
10 bolt holes
27 spline pinion

from

$529.99

Fits Chrysler 8.25″
8.25″ ring gear diameter
27 spline pinion
10 ring gear bolts
4.88 ratio

from

$459.99

Fits Chrysler 8.25″
8.25″ ring gear diameter
27 spline pinion
10 ring gear bolts
4.11 ratio

from

$459.99

Fits Chrysler 8.25″
8.25″ ring gear diameter
27 spline pinion
10 ring gear bolts
3.90 ratio

from

$459.99

Fits Chrysler 8.25″
8.25″ ring gear diameter
27 spline pinion
10 ring gear bolts
3.73 ratio

from

$446.99

Fits Chrysler 8.25″
8.25″ ring gear diameter
27 spline pinion
10 ring gear bolts
4.56 ratio

from

$404.99

Ring/Pinion Sets

from

$359.99

Yukon yoke for Chrysler 7.25″ and 8.25″ with a 7290 U/joint size. 2.625″ snap ring span. 1.125″ cap diameter. Inside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits Chrysler 7.25″ and 8.25″
27 spline
7290 u-joint size
Inside snap ring design
2.625″ snap ring span
1.125″ cap diameter
Strap style

from

$349.99

USA Standard ring & pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring & pinion sets for a variety of common & hard to find applications. USA standard gear offers a standard one year warranty against defects on their ring & pinion sets.

Product Features:

Fits Chrysler 8.25″
8.25″ ring gear diameter
27 spline pinion
10 ring gear bolts
4.56 ratio

from

$334.99

Fits Chrysler 8.25″
8.25″ ring gear diameter
27 spline pinion
10 ring gear bolts
4.88 ratio

from

$324.99

Product Features:

CHRY 10BLT 8.25+8.36 R&P-4.10 RATIO

from

$319.99

Fits Chrysler 8.25″
8.25″ ring gear diameter
27 spline pinion
10 ring gear bolts
4.11 ratio

from

$319.99

Fits Chrysler 8.25″
8.25″ ring gear diameter
27 spline pinion
10 ring gear bolts
3.90 ratio

from

$315.99

Fits 2005 and up Chrysler 8.25″
Included are Timken bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve , thread locker, marking compound with brush, and gasket.

from

$311.99

Yukon standard open spider gear kit for ’97 and newer 8.25″ Chrysler with 29 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.

Product Features:

Spider gear kit
Fit Chrysler 8.25″ open differntial with 29 spline axles
Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.

from

$289.99

Yukon round companion flange for Jeep Liberty rear, Chrysler 8.25″. Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits Chrysler 8.25″
27 spline
Round companion flange

from

$279.99

Yukon yoke for Chrysler 7.25″ and 8.25″ with a 7260 U/joint size. 2.125″ snap ring span, 1.078″ cap diameter. Inside snap ring.This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits Chrysler 7.25″ and 8.25″
27 spline
7260 u-joint size
Inside snap ring design
2.125″ snap ring span
1.078″ cap diameter
Strap style

from

$272.99

from

$268.99

Product Features:

CHRY 10BLT 8.25+8.36 R&P-3.90 RATIO

from

$234.99

Yukon Bearing installation kits are perfect for shops & builders who have shims on the shelf and are looking to save cost over a Master Overhaul kit. This kit uses Timken bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.

Product Features:

Fits 1976 and up Chrysler 8.25″
Included are carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve , marking compound and brush.

Top Picks for 2008 Jeep Compass Drive Shafts and Axles

Upgrade Jeep Compasses with top-quality Drive Shafts and Axles parts, including 16 OEM and aftermarket selections for your 2008 model.

show more show less

from

$101.99

Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
100% new axle and components
New axle nut or attaching hardware included when applicable
Bearings, races and housings are heat-treated for longer life
Precision-engineered seal mating surfaces for leak-free performance
High moly CV joint grease with stainless-steel boot bands

from

$111.99

Designed to meet or exceed OE specifications for fit, form and function
100% new axle and components
New axle nut or attaching hardware included when applicable
Bearings, races and housings are heat-treated for longer life
Precision-engineered seal mating surfaces for leak-free performance
High moly CV joint grease with stainless-steel boot bands

from

$129.99

Designed to meet or exceed OE specifications for fit, form and function
100% new axle and components
New axle nut or attaching hardware included when applicable
Bearings, races and housings are heat-treated for longer life
Precision-engineered seal mating surfaces for leak-free performance
High moly CV joint grease with stainless-steel boot bands

from

$128.99

Designed to meet or exceed OE specifications for fit, form and function
100% new axle and components
New axle nut or attaching hardware included when applicable
Bearings, races and housings are heat-treated for longer life
Precision-engineered seal mating surfaces for leak-free performance
High moly CV joint grease with stainless-steel boot bands

from

$8.99

C/Clip for Chrysler 8.25″, Ford 7.5″, 8.8″, GM 12 bolt car & truck, 8.2″, 8.5″ & 8.6″.

Product Features:

c-clip for Chrysler 8.25″, Ford 8.8″, GM 12 bolt car and truck and GM 8.2″, 8.5″ and 8.6″
.150″ thick

from

$81.99

Designed to meet or exceed OE specifications for fit, form and function
100% new axle and components
New axle nut or attaching hardware included when applicable
Bearings, races and housings are heat-treated for longer life
Precision-engineered seal mating surfaces for leak-free performance
High moly CV joint grease with stainless-steel boot bands

from

$81.99

Designed to meet or exceed OE specifications for fit, form and function
100% new axle and components
New axle nut or attaching hardware included when applicable
Bearings, races and housings are heat-treated for longer life
Precision-engineered seal mating surfaces for leak-free performance
High moly CV joint grease with stainless-steel boot bands

from

$51.99

Direct replacement – this drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicle.
Ideal solution – this kit is a reliable replacement for original components that have failed due to fatigue.
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$34.99

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$883.99

The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:

Carrier bearing puller
Works with an impact gun to safely and easliy remove carrrier bearings

from

$612.99

Built to match O.E. form, fit and function.
100% NEW universal joints are installed to ensure proper fit and optimal performance.
All slip yokes are lubricated to prevent premature wear.
Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.

from

$226.99

Fits Chrysler 7.25″ and 8.25″
27 spline
1310 u-joint size
Outside snap ring design
3.219″ snap ring span
1.062″ cap diameter
Strap style

from

$56.88

Axle Assembly

from

$964.99

Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:

Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
100% new – this drive shaft is made from all new components so there’s no core charge or return hassle.
Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
Serviceable construction – non-staked universal joints are designed for future serviceability

from

$11.49

SHAFT SEAL

from

$3.35

The EMPI Axle Shaft Nut is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium aftermarket replacement
Provides performance and dependability
Manufactured to meet OE specifications

In-Demand Universal Joints for 2008 Jeep Compasses

Select from 9 premium Universal Joints parts for your 2008 Jeep Compass, with prices ranging from $10.99 to $289.99.

show more show less

from

$44.99

Yukon 1310 U/Joint with zerk fitting on cross. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring.

from

$59.99

Yukon 1310 to 1330 adapter U/Joint. The 1310 side has a 3.219″ span and 1.062″ caps. The 1330 side has a 3.625″ span and 1.062″ caps. Both sides are outside snap ring.

from

$109.99

Yukon 1310 to Mechanics 3R adapter U/Joint.

from

$61.99

Yukon 1330 Dual-size cap U/Joint. 3.625″ snap ring span. One set of caps is 1.125″ in diameter and the other is 1.062″. Outside snap ring.

from

$53.99

1330 Yukon Lifetime U/Joint. 3.625″ snap ring span, 1.062″ cap diameter. Outside snap ring.

from

$57.99

1310 Yukon Lifetime U/joint. 1.718″ snap ring span, 1.062″ cap diameter. Inside snap ring.

from

$289.99

Yukon yoke for Chrysler 8.25″ with a 1310 U/joint size. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses straps, with outside snap rings for the Jeep Cherokee. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits Chrysler 8.25″
27 spline
1310 u-joint size
Outside snap ring design
3.219″ snap ring span
1.062″ cap diameter
Strap style

from

$49.99

7260 U/joint strap, Small Chrysler w/ bolts, 7.25, 8.25, 8.75, 9.25.

Product Features:

u-joint strap kit
Fits Chrysler 7.25″, 8.25″ 8.75″ and 9.25″ rear
7260 u-joint size
Includes two straps and four bolts

from

$10.99

7290 U-joint strap bolt (one bolt only) for Chrysler 7.25″, 8.25″, 8.75″, 9.25″.

Product Features:

U-Joint strap bolt
Fits Chrysler 7.25″, 8.25″, 8.75″ and 9.25″
7290 u-joint size

Most Sold 2008 Jeep Compass Spindles

Explore our best-selling Jeep parts for the 2008 Compass among 3 OEM and aftermarket options starting from $3.29.

show more show less

from

$5.49

This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$6.79

This spindle nut retainer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this spindle nut retainer matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this retainer is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$3.29

Direct replacement – this spindle nut washer matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Top-Rated Drivetrains Brands For Your 2008 Jeep Compass

Shop for the best-rated brands offering Drivetrains and other products for your 2008 Jeep Compasses. Below you’ll find some of our best rated Drivetrains from Valvoline, Driveworks, and Carquest Premium, and more. Drivetrains from these brands that fit a 2008 Compass start at just $6.79 and are rated as high as 5 stars. OEM and aftermarket Drivetrains don’t get more top quality, durable, and affordable than from the brands below.

Popular Valvoline 2008 Jeep Compass Drivetrains

When it comes to maintaining or upgrading your 2008 Jeep Compass, using quality Drivetrains is essential to ensure durability and a perfect fit. Valvoline ticks all of those boxes. We offer a wide selection of Valvoline Drivetrains, specifically designed for the 2008 Jeep Compass. With over 2 Valvoline brand Drivetrains in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $12.49, with an average price of just $22.74. Plus, with over 235 customer reviews and an average rating of 5 stars, you can trust that our Valvoline Drivetrains will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$12.49

This product is not rated

High Performance Transmission & Differential Gear Oil: Conventional 75W-90, 1 Quart

“”

from
$32.99

(235)

High Performance Transmission & Differential Gear Oil: Conventional 80W-90, 1 Gallon

“Works”

Popular Driveworks 2008 Jeep Compass Drivetrains

Driveworks auto parts is one of the highest quality Drivetrain brands in the market. Any 2008 Jeep Compass owner should feel confident when installing genuine Driveworks parts in their vehicle. To ensure the best fit and performance for your 2008 Compass, Advance Auto Parts carries a full inventory of 3 Driveworks Drivetrains. Plus you will be keeping your Jeep in peak condition while saving money because prices on these Driveworks Drivetrains range from $6.79 to $23.99, plus, with more than 33 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Drivetrains below will deliver on both quality and value.

from
$23.99

This product is not rated

Camshaft Seal

“”

from
$10.79

(33)

Taper Bearing Set

“Everything worked as it should 5 stars”

from
$6.79

This product is not rated

Tapered Roller Bearing

“”

FAQs for 2008 Jeep Compass Drivetrains

Which Drivetrains are best-sellers for 2008 Jeep Compasses?

Out of 92 Drivetrains that fit 2008 Jeep Compasses, the following parts are the top sellers:

Taper Bearing Set (5050626) – $10.79
CV Axle Shaft Assembly (10612181) – $101.99
CV Axle Shaft Assembly (10612185) – $129.99

What’s the price range for 2008 Jeep Compass Drivetrains?

Drivetrain prices for the 2008 Jeep Compass start at $2.49 and go up to $964.99 for the most premium parts.

What’s the average price of a Drivetrain for a 2008 Jeep Compass?

The average price for Drivetrains for the 2008 Jeep Compass is $167.01. Keep in mind the variety of part types within our Drivetrain category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Drivetrains for other Jeep Compass model years?

Yes, we currently carry Drivetrains for 18 model years of Jeep Compasses between 2007 and 2025. Drivetrains are bought most frequently for the following model years: 2021, 2020, 2019, 2018, 2017, 2016, 2015, 2014, and 2013.

What are the cheapest Drivetrains for my 2008 Jeep Compass?

The cheapest 2008 Jeep Compass Drivetrains we carry in stock are:

Differential Crush Sleeve (20520219) – $2.49
Spindle Washer – I.D. 23.0mm O.D. 38.0mm Thickness 3.6mm (sold by each) (22148804) – $3.29
Axle Shaft Nut (11846198) – $3.35
OE Replacement (11900908) – $3.99
Standard Spindle Nut M22-1.5 Hex Size 32mm (sold by each) (22149131) – $5.49

What are the top-rated Drivetrains that fit the 2008 Jeep Compass?

Out of 642 reviews by customers, our 2008 Jeep Compass Drivetrains have an average customer rating of . These are some of the highest-rated Drivetrain types for the 2008 Jeep Compass and their top-rated products:

Differentials
- Differential Crush Sleeve (20520219) – $2.49
- High Performance Transmission & Differential Gear Oil: Conventional 80W-90, 1 Gallon (10615231) – $32.99
- Differential Pinion Shim Kit (20520100) – $7.49

What types of Drivetrains do you sell for my 2008 Jeep Compass?

As of 2/5/25, these are some of the most in-demand types of Drivetrains for a 2008 Jeep Compass:

Can I get help with 2008 Jeep Compass Drivetrain orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Jeep Drivetrains and more.

What is your return policy for Jeep Compass Drivetrains?

Advance Auto Parts keeps returns simple. For new Jeep Compass Drivetrains and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2008 Jeep Compass Drivetrains

FAG US – SHAFT SEAL (Part No.SS2475)

Yukon Gear – Ring Gear Bolt For C200F Front And ’05 7 Up Chrysler 8.25" Rear (Part No.33032)

Dorman – Spindle Washer – I.D. 23.0mm O.D. 38.0mm Thickness 3.6mm (sold by each) (Part No.618-017)

Anchor – Differential Motor Mount: Right, 1 Piece (Part No.3462)

Idemitsu – Type TLS-LV Automatic Transmission Fluid – 1 qt (Part No.30040096-75000C)

Yukon Gear – Cross Pin Shaft For 8.25" Chrysler (Part No.33308)

Yukon Gear – Pinion Depth Shims For GM 8.25" IFS, 8.5", 12 Bolt Car, Ford 8.8" & Chrysler 8.25" (Part No.55009)

National – Trans Case Seal (Part No.711115)

Yukon Gear – Master Overhaul Kit For Chrysler ’05 & Up 8.25" Differential (Part No.14204)

Yukon Gear – High Performance Ring & Pinion Gear Set For Chrysler 8.25" In A 3.07 Ratio (Part No.24643)

Dorman – Drive Shaft Repair Kit – Only Fits Dorman Driveshafts (Part No.932-988)

Driveworks – Taper Bearing Set (Part No.S-A-18)

EMPI – Axle Shaft Nut (Part No.K4030222224EMP)

Yukon Gear – Yoke For Chrysler 7.25" And 8.25" With A 1310 U/Joint Size (Part No.41004)

Yukon Gear – 7260 U/Joint Strap, Small Chrysler With Bolts, 7.25, 8.25, 8.75, 9.25 (Part No.41192)

Yukon Gear – 7.25" & 8.25" Chrysler Redi Sleeve (Part No.30224)

Yukon Gear – 1310 Lifetime U/Joint (Part No.42003)

Needa Parts – Standard Engine Oil Drain Plug: 7/8 " -16 Thread, 1-1/8 " Head (Sold by each) (Part No.090-018)

Cardone – Drive Shaft: Not Greasable, Direct Replacement (Part No.65-3002)

Crown Auto Jeep Replacmnt – OE Replacement (Part No.68064273AB)

Yukon Gear – Crush Sleeve (Part No.33093)

National – Shaft Repair Sleeve (Part No.99166)

Yukon Gear – C/Clip (Part No.33083)

Corteco – Diff. Side Cover Sea (Part No.J7041150348CFW)

Yukon Gear – Bolt/Screw For Adjuster Lock For Chrysler 7.25", 8.25", 8.75", 9.25" (Part No.33233)

Dorman – Standard Spindle Nut M22-1.5 Hex Size 32mm (sold by each) (Part No.615-079)

Yukon Gear – Cross Pin Bolt (Part No.33067)

Motive Gear – Differential Carrier Gear Kit (Part No.C8.25BIL)

Valvoline – High Performance Transmission & Differential Gear Oil: Conventional 80W-90, 1 Gallon (Part No.773732)

National – Shaft Repair Sleeve (Part No.99139)

Motive Gear – Differential Pinion Shim Kit (Part No.1100)

Motive Gear – Differential Crush Sleeve (Part No.3507575)

Driveworks – Taper Bearing Set (Part No.S-A-18)

National – Shaft Repair Sleeve (Part No.99157)

Motive Gear – Pinion Nut (Part No.1260823)

National – Bearings (Part No.32008)

Yukon Gear – Crush Sleeve (Part No.33093)

Motive Gear – Ring Gear Bolt (Part No.1304)

Needa Parts – Standard Engine Oil Drain Plug: 9/16-18 Thread, 0.75 " Head, 1 Pack (Part No.090-030)

Yukon Gear – Ring Gear Bolt For C200F Front And ’05 7 Up Chrysler 8.25" Rear (Part No.33032)

Yukon Gear – Pinion Depth Shims For GM 8.25" IFS, 8.5", 12 Bolt Car, Ford 8.8" & Chrysler 8.25" (Part No.55009)

Yukon Gear – Pinion Nut (Part No.33142)

Yukon Gear – Chrysler Fine Spline Pinion Nut For Chrysler 7.25", 8", 8.25", 8.75", And 9.25" (Part No.33253)

USA Standard Gear – Open Spider Gear Set For Chrysler 8.25", 29 Spline (Part No.39003)

Yukon Gear – Bolt/Screw For Adjuster Lock For Chrysler 7.25", 8.25", 8.75", 9.25" (Part No.33233)

Yukon Gear – Carrier Installation Kit For ’76 & Up Chrysler 8.25" Rear (Part No.57014)

Driveworks – Tapered Roller Bearing (Part No.S-LM-603012)

Motive Gear – Differential Ring and Pinion (Part No.C8.25-456)

USA Standard Gear – Ring/Pinion Sets (Part No.36350)

Motive Gear – Differential Ring and Pinion (Part No.C8.25-355)

Anchor – Differential Motor Mount: Right, 1 Piece (Part No.3462)

Anchor – Differential Motor Mount: Left, 1 Piece (Part No.3463)

Yukon Gear – 8.25" Chrysler Pinion Gear Thrust Washer (Part No.33273)

Motive Gear – Differential Pinion Seal (Part No.8516N)

Needa Parts – Standard Engine Oil Drain Plug: 7/8 " -16 Thread, 1-1/8 " Head (Sold by each) (Part No.090-018)

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

Yukon Gear – High Performance Ring & Pinion Gear Set For Chrysler 8.25" In A 3.07 Ratio (Part No.24643)

Yukon Gear – High Performance Ring & Pinion Gear Set For Chrylser 8.25" In A 4.88 Ratio (Part No.24226)

Yukon Gear – High Performance Ring & Pinion Gear Set For Chrysler 8.25" In A 4.11 Ratio (Part No.24004)

Yukon Gear – High Performance Ring & Pinion Gear Set For Chrysler 8.25" In A 3.90 Ratio (Part No.24003)

Yukon Gear – High Performance Ring & Pinion Gear Set For Chrysler 8.25" In A 3.73 Ratio (Part No.24002)

Yukon Gear – High Performance Ring & Pinion Gear Set For Chrysler 8.25" In A 4.56 Ratio (Part No.24005)

USA Standard Gear – Ring/Pinion Sets (Part No.36349)

Yukon Gear – Yoke For Chrysler 7.25" And 8.25" With A 7290 U/Joint Size (Part No.41005)

USA Standard Gear – Ring & Pinion Gear Set For Chrysler 8.25" In A 4.56 Ratio (Part No.36012)

USA Standard Gear – Ring & Pinion Gear Set For Chrysler 8.25" In A 4.88 Ratio (Part No.36268)

Motive Gear – Differential Ring and Pinion (Part No.C8.25-410)

USA Standard Gear – Ring & Pinion Gear Set For Chrysler 8.25" In A 4.11 Ratio (Part No.36011)

USA Standard Gear – Ring & Pinion Gear Set For Chrysler 8.25" In A 3.90 Ratio (Part No.36010)

Yukon Gear – Master Overhaul Kit For Chrysler ’05 & Up 8.25" Differential (Part No.14204)

Yukon Gear – Standard Open Spider Gear Kit For ’97 And Newer 8.25" Chrysler With 29 Spline Axles (Part No.16003)

Yukon Gear – Round Companion Flange For Jeep Liberty Rear, Chrysler 8.25" (Part No.41120)

Yukon Gear – Yoke For Chrysler 7.25" And 8.25" With A 7260 U/Joint Size (Part No.41003)

Motive Gear – RP CHRYSLER 8.25" 8.375" 3.73 MG (Part No.C8.25-373)

Motive Gear – Differential Ring and Pinion (Part No.C8.25-390)

Yukon Gear – Bearing Install Kit For ’75 And Newer Chrysler 8.25" Differential (Part No.11004)

Crown Auto Jeep Replacmnt – OE Replacement (Part No.68064273AB)

SKF – TRANS CASE EXT. HSG (Part No.J7114366719SKF)

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV82017)