2008 Hyundai Tiburon Vehicle Hoods

Essential 2008 Hyundai Tiburon Vehicle Hoods

International Suspension Group – International Suspension Group Hood Strut (Part No.O2020444080ISG)

International Suspension Group Hood Strut

from

$27.07
ISG gas charged lift supports are manufactured to automotive O.E. performance and quality specifications, restores the original opening and closing speeds of your hood, hatch or trunk, are easy to install, no special tools required.

Product Features:
  • Exact replacement, engineered for your application.
  • Rust-resistant piston rod extends product life.
  • Easy lifting, reduced closing effort.
  • Consistent lifting force through 50,000 cycles.
See More
View Product

Atlas Lift – Lift Support (Part No.LS11024)

Lift Support

from

$27.99
Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!

Product Features:
  • Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
  • Easy Install – Less than 15 Minutes! based on average install time across all parts
  • No Special Tools Required
  • Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
  • OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
  • OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
  • World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
  • Trilingual Install Instructions provided inside each package
See More
View Product

StrongArm – Liftgate Lift Support: 20.84" Ext Length, 7.75" Travel, 137 Lbs of Force, 1 Pk (Part No.C6248)

Liftgate Lift Support: 20.84" Ext Length, 7.75" Travel, 137 Lbs of Force, 1 Pk

from

$68.99
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.

Product Features:
  • Heavy Gauge Steel Body
  • Self-Cleaning Piston Assembly
  • Rubber O-Ring Piston Seal
  • Non-Stick Back-Up Ring
  • Hardened Nitride Plated Steel Shaft
  • Engineered In USA To OE Quality Standards For Performance And Durability
  • IATF 16949, ISO 9001 Certified; Passes Extensive Quality Checks And Testing
  • Easy To Install In Just Minutes. No Special Tools Required.
  • Exact Fit Original Equipment Design Guarantees Correct Fit And Function
  • Consistent Performance In All Weather Conditions
  • Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
  • Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle
See More
View Product

StrongArm – Hood Lift Support: 17.84" Ext Length, 6.0" Travel, 70 Lbs of Force, 1 Pk (Part No.D6352)

Hood Lift Support: 17.84" Ext Length, 6.0" Travel, 70 Lbs of Force, 1 Pk

from

$86.99
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.

Product Features:
  • Heavy Gauge Steel Body
  • Self-Cleaning Piston Assembly
  • Rubber O-Ring Piston Seal
  • Non-Stick Back-Up Ring
  • Hardened Nitride Plated Steel Shaft
  • Engineered In USA To OE Quality Standards For Performance And Durability
  • IATF 16949, ISO 9001 Certified; Passes Extensive Quality Checks And Testing
  • Easy To Install In Just Minutes. No Special Tools Required.
  • Exact Fit Original Equipment Design Guarantees Correct Fit And Function
  • Consistent Performance In All Weather Conditions
  • Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
  • Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle
See More
View Product

StrongArm – Liftgate Lift Support: 20.84" Ext Length, 7.75" Travel, 110 Lbs of Force, 1 Pk (Part No.C4587)

Liftgate Lift Support: 20.84" Ext Length, 7.75" Travel, 110 Lbs of Force, 1 Pk

from

$40.99
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.

Product Features:
  • Heavy Gauge Steel Body
  • Self-Cleaning Piston Assembly
  • Rubber O-Ring Piston Seal
See More

(1 reviews)
View Product

2008 Hyundai Tiburon Vehicle Hoods

Maybe you’re in the middle of a full rebuild of that 2008 Hyundai Tiburon. Maybe you just need a couple of Vehicle Hoods. Either way, Advance Auto Parts has 5 different Vehicle Hoods in our inventory ranging from $27.80 to $86.99. That means you can find the exact parts or products you need to keep that 2008 Hyundai Tiburon running smoothly.

Vehicle Hoods are only as good as their brand. We stock 3 different brands to make sure you have plenty of trusted parts to choose from for your 2008 Hyundai Tiburon. StrongArm, Autopart International Inc, and Dorman are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Vehicle Hoods for your 2008 Hyundai Tiburon, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Vehicle Hoods to keep your 2008 Hyundai Tiburon rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Vehicle Hoods Brands To Make Your 2008 Hyundai Tiburon Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2008 Hyundai Tiburon demands trusted brand parts and products to keep it running. Many trusted brands of Vehicle Hoods make up Advance Auto Parts’ inventory, and all are ready to help make your Tiburon the best it can be. Be sure to browse some of our top Vehicle Hoods brands and parts.