2008 Hummer H3 Tools
Find Your Specific 2008 Hummer H3 Tools
Below you will find various in-demand Hummer Tools, components and accessories for your 2008 H3. Advance Auto Parts has popular H3 parts like Speciality Tools, Brake Tools, Tire Tools and more. You’ll also find aftermarket and OEM Tools for other H3 model years including
2006,
2007,
2009,
2010 and more. Select a category of 2008 Hummer H3 Tools below and start saving instantly.
Popular 2008 Hummer H3 Tools Categories
Essential Tools for 2008 Hummer H3s
Schrader – Nickel Plated Brass Valve Core – 100 Pack (Part No.20055-100)
from
$23.99
Schrader is a pioneer in TPMS, a vehicle safety feature that is now standard on all cars and light trucks sold in the U.S. Schrader¿s direct TPMS technology can be found in over 50 percent of global OEM vehicle platforms.
Product Features:
See More
Product Features:
- Valve core is nickel plated to aid in corrosion resistance
- Valve core torque spec = 3.5 in-lbs
- Valve core provides an internal seal for the valve stem, while also allowing tire fill
- VEHICLE FIT: Each service component is tailored to a specific vehicle make, model, and year
- PROPER SERVICE: Service components are intended for one-time use only and must be replaced with every tire change
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Yukon Gear – Yoke Holder Tool (Part No.56066)
from
$159.99
Yoke holder tool, fits most yokes. 1310/1330/1350/1410/7260/7290/MR3/Toyota. No return.
Product Features:
See More
Product Features:
- Yoke holder tool
- Firmly holds pinion yoke in place allowing for easier pinion preload setting
Yukon Gear – Multi-Shim Driver (Part No.56077)
from
$198.99
Yukon multi-shim driver. This shim driver tool works on a variety of applications including: – GM 7.5″, 8.2″, 8.5″, 8.6″, 12P, 12T, – Ford 7.5″, 8.8″, 9.75″, 10.25″, 10.5″, – Model 35, Dana 44HD, Dana 44 JK, and more! No return.
Product Features:
See More
Product Features:
- Carrier Multi-shim driver
- Allows for easier carrier shim installation without damaging carrier shims
Carquest Wearever – Brake Hardware Kit With Quiet Clip (Part No.3019407)
from
$2.49
Brakes are designed as a system and all the parts need to work together for best performance. The Bleeder Screw clears the air out of the brake line, normally placed at the highest point of the caliper or cylinder.
Product Features:
See More
Product Features:
- Manufactured with quality materials to suppress high stress levels
- Direct replacement for a proper fit
- Corrosion resistant coating for long-lasting durability against harsh roads
- Provides smoother braking
- This part matches Original Equipment (OE) quality specifications
Russell – Speed Bleeder, Thread Size – 10 mm X 1.0 (Part No.639560)
from
$27.49
Russell’s wide variety of lightweight aluminum adapter fittings allow for the connection of Russell hose ends to almost any component. Adapters are offered in standard thread, metric thread and pipe thread to fit most popular oil pumps, fuel pumps, fuel f
See More
Dorman – Crankshaft Oil Seal Installer (Part No.635-000)
from
$121.99
When replacing the rear main seal cover on specified vehicle applications, this must-have tool ensures the cover is properly aligned on the crankshaft to prevent damage and leaks. Made of steel, it’s finished with zinc plating for durability.
Product Features:
See More
Product Features:
- Ideal solution – this must-have rear main seal cover installation tool ensures the cover is properly aligned on the crankshaft
- Application specific – engineered for a proper repair on specified applications
- Convenient and valuable – helps ensure alignment to prevent damage and leaks
- Durable construction – machined from low-carbon steel, zinc-plated and clear-chromate-coated for durability
Accel – Handheld Computer Programmer for Enhanced Performance and Tuning Control (Part No.49505)
from
$435.99
Revolutionary handheld tuner quickly and easily reprograms your vehicle for more power across the entire rpm range! 50 State Legal!
Product Features:
See More
Product Features:
- Average gains in excess of 30 HP/40 ft.-lbs. for gas and 80 HP/150 ft.-lbs. diesel*
- HD 2.8¿ color screen with updated interface for easier and faster modifications
- HD 2.8┐ color screen with updated interface for easier and faster modifications
- Increased memory and faster processor for improved tuning plus faster updating
- Active fuel management control*
- Performance test (0-60, ╝ mile testing)
- Performance test (0-60, ¼ mile testing)
- Internet updating using PC software
- Tire size adjustment
- Axle gear ratio adjustment
- Shift point and firmness adjustment*
- Speed and rev limiter adjustments*
- Carb EO # D-745
- Diagnostic capability ¿ read and clear trouble codes with explanation of codes
- Diagnostic capability ┐ read and clear trouble codes with explanation of codes
Dayco – Ela Stretch Belt Installation Tool: Reusable Mounting Bolt (Part No.93875)
from
$31.99
The Dayco ela belt installation tool is required when specified on certain ela (stretch to fit) belt applications. Note: some ela belts requires only a simple zip tie to install, please verify the Dayco ela belt installation tool is required for your application. Do not attempt to install by prying the belt on the pulleys.
Product Features:
See More
Product Features:
- Ela belt and belt tool sold separately
- Can be used on multiple Dayco ela (stretch to fit) belts
- Includes reusable mounting bolt
- Includes installation instructions
Diablosport – i3 (Part No.8245)
from
$426.99
i3
Dorman – GM Air Conditioning Schrader Valve M12 x 1.50 (Part No.800-955)
from
$12.99
This A/C service valve is designed to match the fit and function of the original valve on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this A/C service valve is designed to match the fit and function of the original valve on specified vehicles
- Restores functionality – this valve is made to fit and fully restore part functionality after the original valve fails
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Felpro – Engine Crankshaft Repair Sleeve Tool (Part No.16329)
from
$48.99
Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Upgrade your 2008 Hummer H3 with Top-Quality Tools
When it comes to maintaining or upgrading your 2008 Hummer H3, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Hummer or enhancing its overall performance, Tools are key to keeping your H3 functioning at its best. At Advance Auto Parts, we offer a wide selection of 10 Tools for the 2008 Hummer H3, designed to meet your needs without breaking the bank.
From
Speciality Tool
replacements to
Brake Tools
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Tools for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Tools for your 2008 Hummer H3 at great prices.
Our Tools inventory for this model
ranges from just $2.49 to $435.99, with
an average price of $141.60.
Our 10 Tools in stock come from 8 trusted brands, so you’re sure to find the right part for your 2008 Hummer H3 without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2008 Hummer H3, we stock popular OEM and aftermarket Tools from top names
like Dorman, and more.
Dorman Tools
start at just $12.99 and boast an impressive 4.2 stars average rating from customers.
With 54 customer reviews and counting, our 2008 Hummer H3 Tools have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Tool upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2008 Hummer H3 is always ready to roll. We’re committed to providing you with everything you need to keep your H3 in top shape, all in one place.
Start shopping confidently below for your 2008 Hummer H3!
Best-Selling Speciality Tools for 2008 Hummer H3s
Enhance the driving experience in your Hummer with 3 quality Speciality Tool components, starting at $31.99.
Dayco – Ela Stretch Belt Installation Tool: Reusable Mounting Bolt (Part No.93875)
from
$31.99
The Dayco ela belt installation tool is required when specified on certain ela (stretch to fit) belt applications. Note: some ela belts requires only a simple zip tie to install, please verify the Dayco ela belt installation tool is required for your application. Do not attempt to install by prying the belt on the pulleys.
Product Features:
See More
Product Features:
- Ela belt and belt tool sold separately
- Can be used on multiple Dayco ela (stretch to fit) belts
- Includes reusable mounting bolt
- Includes installation instructions
Accel – Handheld Computer Programmer for Enhanced Performance and Tuning Control (Part No.49505)
from
$435.99
Revolutionary handheld tuner quickly and easily reprograms your vehicle for more power across the entire rpm range! 50 State Legal!
Product Features:
See More
Product Features:
- Average gains in excess of 30 HP/40 ft.-lbs. for gas and 80 HP/150 ft.-lbs. diesel*
- HD 2.8¿ color screen with updated interface for easier and faster modifications
- HD 2.8┐ color screen with updated interface for easier and faster modifications
- Increased memory and faster processor for improved tuning plus faster updating
- Active fuel management control*
- Performance test (0-60, ╝ mile testing)
- Performance test (0-60, ¼ mile testing)
- Internet updating using PC software
- Tire size adjustment
- Axle gear ratio adjustment
- Shift point and firmness adjustment*
- Speed and rev limiter adjustments*
- Carb EO # D-745
- Diagnostic capability ¿ read and clear trouble codes with explanation of codes
- Diagnostic capability ┐ read and clear trouble codes with explanation of codes
Diablosport – i3 (Part No.8245)
from
$426.99
i3
Most Popular 2008 Hummer H3 Brake Tools
Customize your Hummer with 1 Brake Tools products
like Brake Bleeder Screws, all
priced under $2.49.
Carquest Wearever – Brake Hardware Kit With Quiet Clip (Part No.3019407)
from
$2.49
Brakes are designed as a system and all the parts need to work together for best performance. The Bleeder Screw clears the air out of the brake line, normally placed at the highest point of the caliper or cylinder.
Product Features:
See More
Product Features:
- Manufactured with quality materials to suppress high stress levels
- Direct replacement for a proper fit
- Corrosion resistant coating for long-lasting durability against harsh roads
- Provides smoother braking
- This part matches Original Equipment (OE) quality specifications
Top Picks for 2008 Hummer H3 Tire Tools
Upgrade Hummer H3s with top-quality Tire Tools parts, including 1 OEM and aftermarket selections for your 2008 model.
Dorman – GM Air Conditioning Schrader Valve M12 x 1.50 (Part No.800-955)
from
$12.99
This A/C service valve is designed to match the fit and function of the original valve on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this A/C service valve is designed to match the fit and function of the original valve on specified vehicles
- Restores functionality – this valve is made to fit and fully restore part functionality after the original valve fails
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
In-Demand Engine Tools for 2008 Hummer H3s
Select from 2 premium Engine Tools parts for your 2008 Hummer H3, with prices ranging from $48.99 to $121.99.
Dorman – Crankshaft Oil Seal Installer (Part No.635-000)
from
$121.99
When replacing the rear main seal cover on specified vehicle applications, this must-have tool ensures the cover is properly aligned on the crankshaft to prevent damage and leaks. Made of steel, it’s finished with zinc plating for durability.
Product Features:
See More
Product Features:
- Ideal solution – this must-have rear main seal cover installation tool ensures the cover is properly aligned on the crankshaft
- Application specific – engineered for a proper repair on specified applications
- Convenient and valuable – helps ensure alignment to prevent damage and leaks
- Durable construction – machined from low-carbon steel, zinc-plated and clear-chromate-coated for durability
Felpro – Engine Crankshaft Repair Sleeve Tool (Part No.16329)
from
$48.99
Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Most Sold 2008 Hummer H3 Tire Valves
Explore our best-selling Hummer parts for the 2008 H3 among 1 OEM and aftermarket options starting from $23.99.
Schrader – Nickel Plated Brass Valve Core – 100 Pack (Part No.20055-100)
from
$23.99
Schrader is a pioneer in TPMS, a vehicle safety feature that is now standard on all cars and light trucks sold in the U.S. Schrader¿s direct TPMS technology can be found in over 50 percent of global OEM vehicle platforms.
Product Features:
See More
Product Features:
- Valve core is nickel plated to aid in corrosion resistance
- Valve core torque spec = 3.5 in-lbs
- Valve core provides an internal seal for the valve stem, while also allowing tire fill
- VEHICLE FIT: Each service component is tailored to a specific vehicle make, model, and year
- PROPER SERVICE: Service components are intended for one-time use only and must be replaced with every tire change
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Top-Rated Tools Brands For Your 2008 Hummer H3
Shop for the best-rated brands offering Tools and other products for your 2008 Hummer H3s. Below you’ll find some of our best rated Tools from Dorman, and more. Tools from these brands that fit a 2008 H3 start at just $12.99 and are rated as high as 4.2 stars. OEM and aftermarket Tools don’t get more top quality, durable, and affordable than from the brands below.
Popular Dorman 2008 Hummer H3 Tools
When it comes to maintaining or upgrading your 2008 Hummer H3, using quality Tools is essential to ensure durability and a perfect fit. Dorman ticks all of those boxes. We offer a wide selection of Dorman Tools, specifically designed for the 2008 Hummer H3. With over 1 Dorman brand Tools in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $12.99. Plus, with over 17 customer reviews and an average rating of 4.2 stars, you can trust that our Dorman Tools will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$12.99
(17)
GM Air Conditioning Schrader Valve M12 x 1.50
“This was a much better product than the original.”
FAQs for 2008 Hummer H3 Tools
Which Tools are best-sellers for 2008 Hummer H3s?
Out of 10 Tools that fit 2008 Hummer H3s, the following parts are the top sellers:
- Brake Hardware Kit With Quiet Clip (11341643) – $2.49
- Ela Stretch Belt Installation Tool: Reusable Mounting Bolt (10114180) – $31.99
- Nickel Plated Brass Valve Core – 100 Pack (11569731) – $23.99
What’s the price range for 2008 Hummer H3 Tools?
Tool prices for the 2008 Hummer H3 start at $2.49 and go up to $435.99 for the most premium parts.
What’s the average price of a Tool for a 2008 Hummer H3?
The average price for Tools for the 2008 Hummer H3 is $141.60. Keep in mind the variety of part types within our Tool category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Tools for other Hummer H3 model years?
What are the cheapest Tools for my 2008 Hummer H3?
The cheapest 2008 Hummer H3 Tools we carry in stock are:
- Brake Hardware Kit With Quiet Clip (11341643) – $2.49
- GM Air Conditioning Schrader Valve M12 x 1.50 (10462714) – $12.99
- Nickel Plated Brass Valve Core – 100 Pack (11569731) – $23.99
- Ela Stretch Belt Installation Tool: Reusable Mounting Bolt (10114180) – $31.99
- Engine Crankshaft Repair Sleeve Tool (21021895) – $48.99
What are the top-rated Tools that fit the 2008 Hummer H3?
Out of 54 reviews by customers, our 2008 Hummer H3 Tools have an average customer rating of . These are some of the highest-rated Tool types for the 2008 Hummer H3 and their top-rated products:
- Tire Tools
- GM Air Conditioning Schrader Valve M12 x 1.50 (10462714) – $12.99
What types of Tools do you sell for my 2008 Hummer H3?
As of 3/1/26, these are some of the most in-demand types of Tools for a 2008 Hummer H3:
Can I get help with 2008 Hummer H3 Tool orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Hummer Tools and more.
What is your return policy for Hummer H3 Tools?
Advance Auto Parts keeps returns simple. For new Hummer H3 Tools and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
