2008 Honda Civic Ignition and Tune-Up Products

Essential Ignition and Tune-Up Products for 2008 Honda Civics

Delphi – Ignition Coil (Part No.GN10382)

Ignition Coil

from

$111.99
Every single Delphi ignition coil is designed and endurance tested using high quality materials. This ensures fast starts, consistent engine performance and optimized fuel efficiency. We makes more than 10 million ignition coils for North America each year, and each one is engineered to OE design specifications for vehicles from Ford, Toyota, Nissan, Lexus, GM, Mazda, Chrysler, Subaru, Acura and more.

Product Features:
  • Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
  • Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
  • Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
  • We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues
See More

Carquest Premium – Ignition Coil Set: Meets or Exceeds OE Specifications, 4 Count (Part No.EBC1018-4)

Ignition Coil Set: Meets or Exceeds OE Specifications, 4 Count

from

$165.99
Carquest Premium ignition coil sets meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coil sets are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coil sets with an industry-leading warranty. Carquest Premium ignition coil sets are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Built by IATF 16949 certified manufacturers for consistent durability
  • Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
  • Segmented secondary bobbins to distribute high voltage and prevent shorting
  • Extensive design validation testing to ensure long-lasting reliability
  • 100% end-of-line tested to ensure proper performance
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
See More

Carquest Premium – Ignition Coil (Part No.EBC1567)

Ignition Coil

from

$64.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Built by IATF 16949 certified manufacturers for consistent durability
  • Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
  • Segmented secondary bobbins to distribute high voltage and prevent shorting
  • 100% end-of-line tested to ensure proper performance
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
See More

Victor Reinz – Spark Plug Tube Seal Set (Part No.18-10079-01)

Spark Plug Tube Seal Set

from

$32.49
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

Felpro – Spark Plug Tube Seal Set (Part No.ES 72967)

Spark Plug Tube Seal Set

from

$22.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Felpro – Spark Plug Tube Seal Set (Part No.ES 73103)

Spark Plug Tube Seal Set

from

$66.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Champion – Double Platinum Power Spark Plug (RC8PYPB4): Enhanced Durability & Performance (Part No.7545)

Double Platinum Power Spark Plug (RC8PYPB4): Enhanced Durability & Performance

from

$11.49
Champion Double Platinum Power spark plugs are engineered for enhanced durability and performance, making them a premium choice for reliable ignition. Featuring a platinum fine-wire center electrode and platinum pad ground electrode, these spark plugs deliver greater wear resistance and sharper spark focus for optimal ignitability. The V-trimmed ground electrode ensures precise spark delivery, while the exclusive Heat-Active alloy maintains stable operating temperatures under all engine loads, ensuring consistent performance. Designed as a standard replacement, these spark plugs are equipped with a flat seat type and integrated resistor for compatibility with a wide range of vehicles. Whether you’re seeking improved engine efficiency or long-lasting reliability, Champion Double Platinum Power spark plugs provide the powerful performance you need.

Product Features:
  • Double Platinum Power – Premium Spark Plug. More Powerful Performance.
  • Platinum center and ground electrode for greater wear resistance
  • Maintains stable operating temperature under all engine loads
  • Fine-wire center electrode for greater ignitability
  • V-trimmed ground electrode promotes sharper spark focus
  • Heat-Active alloy allows electrodes to reach optimal temperature
See More

DENSO – Iridium TT Spark Plug: Ultimate Endurance and Power, 0.4mm Iridium Tip, IK16TT (Part No.4701)

Iridium TT Spark Plug: Ultimate Endurance and Power, 0.4mm Iridium Tip, IK16TT

from

$12.99
Experience the perfect blend of durability and high performance with this spark plug, designed to deliver exceptional power and torque. Featuring a 0.4mm Iridium Center Electrode – the world’s smallest diameter – it maximizes firing potential, while the 0.7mm Needle Tip Ground Electrode enhances spark energy and minimizes heat quenching. Built with DENSO’s patented Iridium-Rhodium alloy formula, it boasts the highest concentration of Iridium for unmatched durability, enduring temperatures over 4000 Deg F. The advanced 360-degree laser welding process ensures a robust bond and structural integrity, while the Twin-Tip Technology combines a fine wire Iridium Center Electrode with a Needle Tip Platinum Ground Electrode for superior ignition. With over 100,000 miles of reliable performance, this plug enhances fuel economy, reduces emissions, and is crafted from premium materials for long-lasting endurance. Designed with a flat seat type, it offers OE-style reliability with the added benefits of cutting-edge engineering.

Product Features:
  • 0.4mm Iridium Center Electrode: World’s Smallest Diameter that maximizes firing potential
  • 0.7mm Needle Tip Ground Electrode: Promotes higher spark energy and less heat quenching
  • DENSO Patented Optimized Iridium-Rhodium Alloy Formula: Highest concentration of Iridium vs. competitors for greater durability
  • DENSO Patented 360 degree laser welding process: Ensuring exceptional quality bond and structural strength with the Iridium Center Electrode
  • Durability of an OE style plug combined with Power and Torque of high performance.
  • Withstands temperatures greater than 4000 degree Fahrenheit
  • Iridium TT
  • Ultimate Endurance and Power: The DENSO Iridium TT Spark Plug features a 0.7mm Iridium Tip, ensuring over 100,000 miles of uncompromised performance.
  • Advanced Twin-Tip Technology: Developed from Original Equipment Specification Super Ignition Plug (SIP) design, combining a Fine Wire Iridium Center Electrode with a Needle Tip Platinum Ground Electrode.
  • Enhanced Fuel Economy and Lower Emissions: Drive around the Earth over 4 times with improved fuel efficiency and reduced emissions.
  • Premium Materials: Features an Iridium Center Electrode Tip and a Flat Seat Type for optimal performance and durability.
See More

NGK – Iridium IX Spark Plug (BKR5EIX-11): Extreme Ignitability & Durability (Part No.5464)

Iridium IX Spark Plug (BKR5EIX-11): Extreme Ignitability & Durability

from

$13.99
NGK Iridium IX spark plugs are specifically designed for the performance enthusiast. Iridium IX provides outstanding acceleration, high fuel efficiency and durability. NGK Iridium IX plugs offer extreme ignitability and exceptional anti-fouling. Tapered cut ground electrode provides improved starting, idling and throttle response. The Iridium fine wire center electrode’s durability is six times harder than platinum. Iridium alloy’s extremely high melting point is perfect for today’s engines. For even greater performance consider upgrading to an NGK Ruthenium HX plug.

Product Features:
  • SINGLE IRIDIUM TIP: Fine wire 0.6 millimeter iridium tip center electrode ensures high durability and a consistently stable spark
  • IRIDIUM ALLOY CENTER ELECTRODE: Iridium’s density (6x that of platinum) and extremely high melting point is perfect for modern high efficiency engines
  • TAPERED CUT GROUND ELECTRODE: Reduced quenching design produces outstanding ignitability, improved acceleration, fuel efficiency and durability
  • SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
  • TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
  • RECOMMENDED USAGE: Modified or high performance applications, or as an upgrade to OE nickel alloy spark plugs
  • Outstanding Acceleration and High Fuel Efficiency: NGK Iridium IX spark plugs are engineered to deliver superior acceleration and enhanced fuel efficiency, making them ideal for performance enthusiasts.
  • Extreme Ignitability and Anti-Fouling: These spark plugs offer exceptional ignitability and anti-fouling properties, ensuring reliable performance and longevity.
See More

DENSO – Direct Ignition Coil – Original Equipment Quality (Part No.673-2301)

Direct Ignition Coil - Original Equipment Quality

from

$81.99
As the innovator and leader in stick coil technology DENSO has conducted superior testing and inspection processes to insure the highest quality ignition coil. Don’t be fooled by imitations – look for the DENSO name to be sure you’re getting the best.

Product Features:
  • First Time Fit
  • Built to DENSO Original Equipment Standards
See More

Carquest Premium – Ignition Switch (Part No.CSE1553)

Ignition Switch

from

$201.99
Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Ignition Switch allows for reliable control of the vehicle’s electrical systems and engine start-up, enhancing convenience and ensuring consistent performance during operation. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:
  • Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
  • Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
  • Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
  • Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.
See More

Carquest Premium – Ignition Lock Cylinder (Part No.CSE2196)

Ignition Lock Cylinder

from

$442.99
The Ignition switch is the main power switched distribution point in every vehicle. The ignition switch in some manner will be connected directly to the vehicle battery and then supply power out to every operating system in the vehicle that is required to be connected and disconnected from the vehicle’s battery or power source.

Product Features:
  • Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the connector terminal design process ensures speed-to-market and a precise connector fit guaranteed.
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure confidence and product reliability, every time.
See More

Carquest Premium – Ignition Lock Cylinder (Part No.CSE2109)

Ignition Lock Cylinder

from

$460.99
The Ignition switch is the main power switched distribution point in every vehicle. The ignition switch in some manner will be connected directly to the vehicle battery and then supply power out to every operating system in the vehicle that is required to be connected and disconnected from the vehicle’s battery or power source.

Product Features:
  • Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the connector terminal design process ensures speed-to-market and a precise connector fit guaranteed.
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure confidence and product reliability, every time.
See More

Carquest Premium – Ignition Lock Cylinder (Part No.CSE2605)

Ignition Lock Cylinder

from

$516.99
The Ignition switch is the main power switched distribution point in every vehicle. The ignition switch in some manner will be connected directly to the vehicle battery and then supply power out to every operating system in the vehicle that is required to be connected and disconnected from the vehicle’s battery or power source.

Product Features:
  • Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the connector terminal design process ensures speed-to-market and a precise connector fit guaranteed.
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure confidence and product reliability, every time.
  • 100% end-of-line tested to ensure confidence and product reliability, every time.
See More

Carquest Premium – Knock Sensor (Part No.SBC3997)

Knock Sensor

from

$97.99
Carquest Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All Carquest Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
  • Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
  • Designed to meet or exceed all OEM specifications in fit, form & function
  • Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

NTK – Ignition Knock (Detonation) Sensor (Part No.ID0308)

Ignition Knock (Detonation) Sensor

from

$91.99
The Ignition Knock (Detonation) Sensor monitors vibrations caused by engine knock or detonation to alter the ignition timing and prevent detonation. A piezoelectric crystal generates a varying voltage based upon engine vibration intensity to delay ignition timing to help prevent severe and costly engine damage. Reasons for replacement include check engine light illumination, engine hesitation, poor fuel economy or failed emissions test.

Product Features:
  • ADVANCED TECHNOLOGY: Manufactured to operation performance standards to meet or exceed OE fit, form, and function to ensure proper ignition timing.
  • INSTALLATION AND SUPPORT: Mounting threads, harness length and wire gauge match OE for easy, worry free installation.
  • THE DIFFERENCE: Reinforced components are used to reduce the chance of part failure and prevent corrosion and moisture penetration. Shielded harness prevents electrical interference.
See More

Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBC3683)

Ignition Knock (Detonation) Sensor

from

$99.99
Carquest Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All Carquest Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
  • Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
  • Designed to meet or exceed all OEM specifications in fit, form & function
  • Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBC3733)

Ignition Knock (Detonation) Sensor

from

$27.99
Carquest Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All Carquest Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
  • Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
  • Designed to meet or exceed all OEM specifications in fit, form & function
  • Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

NGK – Premium OE Fit & Design Spark Plug Wire Set: Variable Pitch Mag Core, 4 Leads (Part No.8026)

Premium OE Fit & Design Spark Plug Wire Set: Variable Pitch Mag Core, 4 Leads

from

$149.99
Product Features:
  • PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
  • BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees Celsius, inner insulation EPDM or silicone for best dielectric strength
  • STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
  • PREMIUM ALLOY WINDING: Variable pitch winding over Ferrite magnetic alloy coating delivers ultra low resistance and excellent interference protection
  • CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
  • LIMITED WARRANTY: See package for details
See More

Carquest Premium – Spark Plug Wire Set: 4 Wires, Increased performance, Designed for direct fit (Part No.35-4207)

Spark Plug Wire Set: 4 Wires, Increased performance, Designed for direct fit

from

$57.99
Product Features:
  • SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
  • Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
  • 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
  • EPDM inner insulation stops power-robbing voltage leaks.
  • With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
  • Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
  • Excellent interference suppression and consistent performance
  • Easy lock terminals for more convenient installation.
  • Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
  • Broad coverage available for most vehicles on the road today
  • Include grease pack to ensure easy installation and removal
See More

NGK – Direct Ignition Coil on Plug Boot: Premium Silicone (Part No.59025)

Direct Ignition Coil on Plug Boot: Premium Silicone

from

$7.99
Product Features:
  • PREMIUM GRADE SILICONE: Designed to withstand harsh environments
  • OEM MATCHED: Includes all required internal springs and ferrite resistors for superior performance and RFI noise suppression
  • LIMITED WARRANTY: See package for details
See More

MSD Ignition – Wire Set; Super Conductor; Acura/Integra 1.8L Vtec; 94-97 (Part No.32349)

Wire Set; Super Conductor; Acura/Integra 1.8L Vtec; 94-97

from

$199.99
The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

Product Features:
  • Bolt-on Performance
  • Custom Fit For Make And Model Listed
  • Wires Are Pre-Cut To Exact Specifications
  • Conductor core features DuPont Kevlar material for increased tensile strength
  • Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
  • Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately
See More

Carquest Premium – Ignition Switch (Part No.CSE1643)

Ignition Switch

from

$213.99
Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Ignition Switch allows for reliable control of the vehicle’s electrical systems and engine start-up, enhancing convenience and ensuring consistent performance during operation. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:
  • Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
  • Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
  • Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
  • Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.
See More

Carquest Premium – Ignition Switch (Part No.CSC1366)

Ignition Switch

from

$177.99
Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Ignition Switch allows for reliable control of the vehicle’s electrical systems and engine start-up, enhancing convenience and ensuring consistent performance during operation. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:
  • Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
  • Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
  • Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
  • Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.
See More

Carquest Premium – Ignition Switch (Part No.CSC1334)

Ignition Switch

from

$52.99
Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Ignition Switch allows for reliable control of the vehicle’s electrical systems and engine start-up, enhancing convenience and ensuring consistent performance during operation. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:
  • Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
  • Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
  • Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
  • Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.
See More

Carquest – Ignition Switch (Part No.CS830)

Ignition Switch

from

$64.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • Copper alloy conductors ensure superior electrical conductivity with low resistive losses
  • Our parts are 100% tested to verify both mechanical and electrical switching performance
  • Robust design and high grade materials meet the stringent demands of today’s service professional
  • BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

Carquest Premium – Ignition Switch (Part No.CSC1541)

Ignition Switch

from

$67.99
Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Ignition Switch allows for reliable control of the vehicle’s electrical systems and engine start-up, enhancing convenience and ensuring consistent performance during operation. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:
  • Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
  • Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
  • Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
  • Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.
See More

Carquest Premium – Ignition Switch (Part No.CSC2054)

Ignition Switch

from

$63.99
Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Ignition Switch allows for reliable control of the vehicle’s electrical systems and engine start-up, enhancing convenience and ensuring consistent performance during operation. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:
  • Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
  • Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
  • Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
  • Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.
See More

Upgrade your 2008 Honda Civic with Top-Quality Ignition and Tune-Up Products

When it comes to maintaining or upgrading your 2008 Honda Civic, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Honda or enhancing its overall performance, Ignition and Tune-Up Products are key to keeping your Civic functioning at its best. At Advance Auto Parts, we offer a wide selection of 79 Ignition and Tune-Up Products for the 2008 Honda Civic, designed to meet your needs without breaking the bank. From Ignition Coils and Boot replacements to Ignition Sensors upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Ignition and Tune-Up Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Ignition and Tune-Up Products for your 2008 Honda Civic at great prices. Our Ignition and Tune-Up Products inventory for this model ranges from just $2.99 to $460.99, with an average price of $54.02. Our 79 Ignition and Tune-Up Products in stock come from 14 trusted brands, so you’re sure to find the right part for your 2008 Honda Civic without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2008 Honda Civic, we stock popular OEM and aftermarket Ignition and Tune-Up Products from top names like NGK, DENSO, Autolite, and more. NGK Ignition and Tune-Up Products start at just $16.99 and boast an impressive 4.8 stars average rating from customers. DENSO and Autolite also bring quality to the table, with Ignition and Tune-Up Products available starting at $3.99, and at an average 4.6 stars rating. With 5,152 customer reviews and counting, our 2008 Honda Civic Ignition and Tune-Up Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Ignition and Tune-Up Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2008 Honda Civic is always ready to roll. We’re committed to providing you with everything you need to keep your Civic in top shape, all in one place. Start shopping confidently below for your 2008 Honda Civic!

Best-Selling Ignition Coils and Boots for 2008 Honda Civics

Enhance the driving experience in your Honda with 16 quality Ignition Coils and Boot components, starting at $61.99.

DENSO – Direct Ignition Coil – Original Equipment Quality (Part No.673-2301)

Direct Ignition Coil - Original Equipment Quality

from

$81.99
As the innovator and leader in stick coil technology DENSO has conducted superior testing and inspection processes to insure the highest quality ignition coil. Don’t be fooled by imitations – look for the DENSO name to be sure you’re getting the best.

Product Features:
  • First Time Fit
  • Built to DENSO Original Equipment Standards
See More

Carquest Premium – Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (Part No.EBC1018)

Ignition Coil: Meets or Exceeds OE Specifications, 1 Count

from

$61.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Built by IATF 16949 certified manufacturers for consistent durability
  • Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
  • Segmented secondary bobbins to distribute high voltage and prevent shorting
  • Extensive design validation testing to ensure long-lasting reliability
  • 100% end-of-line tested to ensure proper performance
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
See More

Carquest Premium – Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (Part No.EBC1413)

Ignition Coil: Meets or Exceeds OE Specifications, 1 Count

from

$71.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Built by IATF 16949 certified manufacturers for consistent durability
  • Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
  • Segmented secondary bobbins to distribute high voltage and prevent shorting
  • Extensive design validation testing to ensure long-lasting reliability
  • 100% end-of-line tested to ensure proper performance
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
See More

NGK – Premium COP Pencil Type Ignition Coil: Meets or Exceeds OE Specifications (Part No.48922)

Premium COP Pencil Type Ignition Coil: Meets or Exceeds OE Specifications

from

$83.99
NGK ignition coils are manufactured to meet or exceed OE standards for the highest durability and operational performance, so they can be installed with confidence. NGK and their family of automotive products have over 80 years’ experience and are driven by extreme dedication to innovation, performance and quality. With state-of-the-art manufacturing, inventory and distribution facilities in North America and globally, NGK is dedicated to providing customers with world-class products and services. Developed and rigorously tested in our ISO 17025 accredited test lab under the most extreme conditions, NGK’s coil designs will outperform all others – far beyond operational environments a vehicle would actually experience. NGK ignition coils have vast coverage including late-model domestic and import vehicles. NGK’s OE legacy, unsurpassed quality and leading vehicles in operation coverage reinforces NGK as The Ignition Specialist.

Product Features:
  • OE QUALITY: Vacuum-sealed premium epoxy resin and thermoplastic coil housings provide superior dielectric strength, voltage insulation and durability
  • OPTIMAL PERFORMANCE: Precision coil windings and laminations maximize outputs, custom NGK ASIC chipset optimizes efficiency, prevents component damage
  • EASE OF INSTALLATION: NGK Ignition Coils include ignition control module, premium high temperature coil boot, and jumper harnesses where required
  • THE NGK DIFFERENCE: Featuring superior materials and design enhancements
  • EXTENSIVE TESTING: NGK ignition coils must pass extreme testing during manufacturing to ensure the highest quality and durability standards are met
  • PRODUCT ENGINEERING: Advanced flow and stress modeling systems preemptively identify and avoid common failure points found in OE and competitor coils
See More

DENSO – Direct Ignition Coil – Original Equipment Quality (Part No.673-2305)

Direct Ignition Coil - Original Equipment Quality

from

$79.99
As the innovator and leader in stick coil technology DENSO has conducted superior testing and inspection processes to insure the highest quality ignition coil. Don’t be fooled by imitations – look for the DENSO name to be sure you’re getting the best.

Product Features:
  • First Time Fit
  • Built to DENSO Original Equipment Standards
See More

Delphi – Ignition Coil (Part No.GN10370)

Ignition Coil

from

$83.99
Every single Delphi ignition coil is designed and endurance tested using high quality materials. This ensures fast starts, consistent engine performance and optimized fuel efficiency. We makes more than 10 million ignition coils for North America each year, and each one is engineered to OE design specifications for vehicles from Ford, Toyota, Nissan, Lexus, GM, Mazda, Chrysler, Subaru, Acura and more.

Product Features:
  • Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
  • Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
  • Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
  • We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues
See More

NGK – Premium COP Pencil Type Ignition Coil: Meets or Exceeds OE Specifications (Part No.48722)

Premium COP Pencil Type Ignition Coil: Meets or Exceeds OE Specifications

from

$68.99
NGK ignition coils are manufactured to meet or exceed OE standards for the highest durability and operational performance, so they can be installed with confidence. NGK and their family of automotive products have over 80 years’ experience and are driven by extreme dedication to innovation, performance and quality. With state-of-the-art manufacturing, inventory and distribution facilities in North America and globally, NGK is dedicated to providing customers with world-class products and services. Developed and rigorously tested in our ISO 17025 accredited test lab under the most extreme conditions, NGK’s coil designs will outperform all others – far beyond operational environments a vehicle would actually experience. NGK ignition coils have vast coverage including late-model domestic and import vehicles. NGK’s OE legacy, unsurpassed quality and leading vehicles in operation coverage reinforces NGK as The Ignition Specialist.

Product Features:
  • OE QUALITY: Vacuum-sealed premium epoxy resin and thermoplastic coil housings provide superior dielectric strength, voltage insulation and durability
  • OPTIMAL PERFORMANCE: Precision coil windings and laminations maximize outputs, custom NGK ASIC chipset optimizes efficiency, prevents component damage
  • EASE OF INSTALLATION: NGK Ignition Coils include ignition control module, premium high temperature coil boot, and jumper harnesses where required
  • THE NGK DIFFERENCE: Featuring superior materials and design enhancements
  • EXTENSIVE TESTING: NGK ignition coils must pass extreme testing during manufacturing to ensure the highest quality and durability standards are met
  • PRODUCT ENGINEERING: Advanced flow and stress modeling systems preemptively identify and avoid common failure points found in OE and competitor coils
See More

Carquest Premium – Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (Part No.EBC1491)

Ignition Coil: Meets or Exceeds OE Specifications, 1 Count

from

$102.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Built by IATF 16949 certified manufacturers for consistent durability
  • Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
  • Segmented secondary bobbins to distribute high voltage and prevent shorting
  • Extensive design validation testing to ensure long-lasting reliability
  • 100% end-of-line tested to ensure proper performance
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
See More

Hitachi – Ignition Coil Actual OE Part – New (Part No.IGC0051)

Ignition Coil Actual OE Part - New

from

$128.99
Hitachi’s Ignition Coils (IGCs) provide the needed energy for today’s high efficiency, high power vehicles. High quality materials ensure that even under the most extreme conditions, Hitachi’s IGCs will not deform or malfunction. Our ignition coils help to produce optimal engine efficiency resulting in reliable performance and gas mileage. Electronic connection points are welded to providing durability during heat cycles. Details such as materials, high turns ratios, and protected circuitry provide a durable and reliable product approved by OE manufacturers. Designed to meet the exact needs of each specific vehicle, Hitachi’s ignition coils are the premium choice.

Product Features:
  • Benefits of these quality Ignition Coils include efficient spark and reduced need for wires, long product life, and consistent voltage and amperage output.
See More

NGK – Premium COP Type Ignition Coil: Meets or Exceeds OE Specifications (Part No.48686)

Premium COP Type Ignition Coil: Meets or Exceeds OE Specifications

from

$126.99
NGK ignition coils are manufactured to meet or exceed OE standards for the highest durability and operational performance, so they can be installed with confidence. NGK and their family of automotive products have over 80 years’ experience and are driven by extreme dedication to innovation, performance and quality. With state-of-the-art manufacturing, inventory and distribution facilities in North America and globally, NGK is dedicated to providing customers with world-class products and services. Developed and rigorously tested in our ISO 17025 accredited test lab under the most extreme conditions, NGK’s coil designs will outperform all others – far beyond operational environments a vehicle would actually experience. NGK ignition coils have vast coverage including late-model domestic and import vehicles. NGK’s OE legacy, unsurpassed quality and leading vehicles in operation coverage reinforces NGK as The Ignition Specialist.

Product Features:
  • OE QUALITY: Vacuum-sealed premium epoxy resin and thermoplastic coil housings provide superior dielectric strength, voltage insulation and durability
  • OPTIMAL PERFORMANCE: Precision coil windings and laminations maximize outputs, custom NGK ASIC chipset optimizes efficiency, prevents component damage
  • EASE OF INSTALLATION: NGK Ignition Coils include ignition control module, premium high temperature coil boot, and jumper harnesses where required
  • THE NGK DIFFERENCE: Featuring superior materials and design enhancements
  • EXTENSIVE TESTING: NGK ignition coils must pass extreme testing during manufacturing to ensure the highest quality and durability standards are met
  • PRODUCT ENGINEERING: Advanced flow and stress modeling systems preemptively identify and avoid common failure points found in OE and competitor coils
See More

Carquest Premium – Ignition Coil Set: Meets or Exceeds OE Specifications, 4 Count (Part No.EBC1413-4)

Ignition Coil Set: Meets or Exceeds OE Specifications, 4 Count

from

$205.99
Carquest Premium ignition coil sets meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coil sets are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coil sets with an industry-leading warranty. Carquest Premium ignition coil sets are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Built by IATF 16949 certified manufacturers for consistent durability
  • Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
  • Segmented secondary bobbins to distribute high voltage and prevent shorting
  • Extensive design validation testing to ensure long-lasting reliability
  • 100% end-of-line tested to ensure proper performance
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
See More

Carquest Premium – Ignition Coil Set: Meets or Exceeds OE Specifications, 4 Count (Part No.EBC1018-4)

Ignition Coil Set: Meets or Exceeds OE Specifications, 4 Count

from

$165.99
Carquest Premium ignition coil sets meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coil sets are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coil sets with an industry-leading warranty. Carquest Premium ignition coil sets are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Built by IATF 16949 certified manufacturers for consistent durability
  • Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
  • Segmented secondary bobbins to distribute high voltage and prevent shorting
  • Extensive design validation testing to ensure long-lasting reliability
  • 100% end-of-line tested to ensure proper performance
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
See More

DENSO – Direct Ignition Coil – Original Equipment Quality (Part No.673-2309)

Direct Ignition Coil - Original Equipment Quality

from

$126.99
As the innovator and leader in stick coil technology DENSO has conducted superior testing and inspection processes to insure the highest quality ignition coil. Don’t be fooled by imitations – look for the DENSO name to be sure you’re getting the best.

Product Features:
  • First Time Fit
  • Built to DENSO Original Equipment Standards
See More

Delphi – Ignition Coil (Part No.GN10248)

Ignition Coil

from

$126.99
Every single Delphi ignition coil is designed and endurance tested using high quality materials. This ensures fast starts, consistent engine performance and optimized fuel efficiency. We makes more than 10 million ignition coils for North America each year, and each one is engineered to OE design specifications for vehicles from Ford, Toyota, Nissan, Lexus, GM, Mazda, Chrysler, Subaru, Acura and more.

Product Features:
  • Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
  • Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
  • Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
  • We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues
See More

Delphi – Ignition Coil (Part No.GN10324)

Ignition Coil

from

$68.99
Every single Delphi ignition coil is designed and endurance tested using high quality materials. This ensures fast starts, consistent engine performance and optimized fuel efficiency. We makes more than 10 million ignition coils for North America each year, and each one is engineered to OE design specifications for vehicles from Ford, Toyota, Nissan, Lexus, GM, Mazda, Chrysler, Subaru, Acura and more.

Product Features:
  • Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
  • Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
  • Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
  • We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues
See More

Beck/Arnley – DIRECT IGNITION COIL (Part No.178-8393)

DIRECT IGNITION COIL

from

$63.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • Made from premium materials to withstand high temperatures
  • Primary and secondary windings made from copper
  • Out of the box and straight onto the vehicle for easy installation
  • Application specific for this vehicle
See More

Most Popular 2008 Honda Civic Ignition Sensors

Customize your Honda with 5 Ignition Sensors products like Knock Sensors, all priced under $128.99.

Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBC3683)

Ignition Knock (Detonation) Sensor

from

$99.99
Carquest Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All Carquest Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
  • Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
  • Designed to meet or exceed all OEM specifications in fit, form & function
  • Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBC3733)

Ignition Knock (Detonation) Sensor

from

$27.99
Carquest Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All Carquest Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
  • Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
  • Designed to meet or exceed all OEM specifications in fit, form & function
  • Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

NTK – Ignition Knock (Detonation) Sensor (Part No.ID0308)

Ignition Knock (Detonation) Sensor

from

$91.99
The Ignition Knock (Detonation) Sensor monitors vibrations caused by engine knock or detonation to alter the ignition timing and prevent detonation. A piezoelectric crystal generates a varying voltage based upon engine vibration intensity to delay ignition timing to help prevent severe and costly engine damage. Reasons for replacement include check engine light illumination, engine hesitation, poor fuel economy or failed emissions test.

Product Features:
  • ADVANCED TECHNOLOGY: Manufactured to operation performance standards to meet or exceed OE fit, form, and function to ensure proper ignition timing.
  • INSTALLATION AND SUPPORT: Mounting threads, harness length and wire gauge match OE for easy, worry free installation.
  • THE DIFFERENCE: Reinforced components are used to reduce the chance of part failure and prevent corrosion and moisture penetration. Shielded harness prevents electrical interference.
See More

Carquest Premium – Knock Sensor (Part No.SBC3965)

Knock Sensor

from

$128.99
Carquest Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All Carquest Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
  • Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
  • Designed to meet or exceed all OEM specifications in fit, form & function
  • Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Delphi – Knock Sensor (Part No.AS10264)

Knock Sensor

from

$28.49
Delphi’s ever growing portfolio of high quality vehicle sensors are backed by stringent OE development and product validation methods. We offer a wide range of sensors, including ABS, camshaft, crankshaft, knock, EGT, MAP, temperature, throttle position, and vehicle speed sensors for a variety of vehicle applications. All of our sensors are tested and calibrated to OE standards, ensuring accurate readings, which helps to reduce comebacks.

Product Features:
  • Flat frequency response allows the same sensor to be used on different engines and the sensor responds to knock frequencies higher than the primary frequency
  • Delphi knock sensors prevent against engine damage from pre-ignition knocking
  • Calibrated for a wide variety of frequencies to detect shifts, and adjust to provide accurate signals to help maximize engine performance
  • Flat frequency response allows the same sensor to be used on different engines and the sensor responds to knock frequencies higher than the primary frequency
  • Ground-isolated design with 2-wire shielded harness helps protect the sensor signal from electro-magnetic interference (EMI)
  • Self-generating piezoelectric design requires no power to the sensor
See More

Top Picks for 2008 Honda Civic Ignition Wires

Upgrade Honda Civics with top-quality Ignition Wires parts, including 1 OEM and aftermarket selections for your 2008 model.

NGK – Direct Ignition Coil on Plug Boot: Premium Silicone (Part No.59025)

Direct Ignition Coil on Plug Boot: Premium Silicone

from

$7.99
Product Features:
  • PREMIUM GRADE SILICONE: Designed to withstand harsh environments
  • OEM MATCHED: Includes all required internal springs and ferrite resistors for superior performance and RFI noise suppression
  • LIMITED WARRANTY: See package for details
See More

In-Demand Ignition Switches for 2008 Honda Civics

Select from 4 premium Ignition Switches parts for your 2008 Honda Civic, with prices ranging from $49.99 to $460.99.

Carquest – Ignition Switch (Part No.CS830)

Ignition Switch

from

$64.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • Copper alloy conductors ensure superior electrical conductivity with low resistive losses
  • Our parts are 100% tested to verify both mechanical and electrical switching performance
  • Robust design and high grade materials meet the stringent demands of today’s service professional
  • BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

Carquest Premium – Ignition Switch (Part No.CSC1076)

Ignition Switch

from

$64.99
Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Ignition Switch allows for reliable control of the vehicle’s electrical systems and engine start-up, enhancing convenience and ensuring consistent performance during operation. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:
  • Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
  • Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
  • Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
  • Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.
See More

Carquest Premium – Ignition Lock Cylinder (Part No.CSE2109)

Ignition Lock Cylinder

from

$460.99
The Ignition switch is the main power switched distribution point in every vehicle. The ignition switch in some manner will be connected directly to the vehicle battery and then supply power out to every operating system in the vehicle that is required to be connected and disconnected from the vehicle’s battery or power source.

Product Features:
  • Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the connector terminal design process ensures speed-to-market and a precise connector fit guaranteed.
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure confidence and product reliability, every time.
See More

Carquest Premium – Ignition Switch (Part No.CSC2512)

Ignition Switch

from

$49.99
Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Ignition Switch allows for reliable control of the vehicle’s electrical systems and engine start-up, enhancing convenience and ensuring consistent performance during operation. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:
  • Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
  • Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
  • Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
  • Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.
See More

Most Sold 2008 Honda Civic Spark Plugs

Explore our best-selling Honda parts for the 2008 Civic among 53 OEM and aftermarket options starting from $2.99.

DENSO – Iridium TT Spark Plug: Ultimate Endurance and Power, 0.4mm Iridium Tip, IKH20TT (Part No.4704)

Iridium TT Spark Plug: Ultimate Endurance and Power, 0.4mm Iridium Tip, IKH20TT

from

$12.99
Experience the perfect blend of durability and performance with this Iridium TT Spark Plug. Engineered with a 0.4mm Iridium Center Electrode, the world’s smallest diameter, it maximizes firing potential for unmatched ignition efficiency. The 0.7mm Needle Tip Ground Electrode enhances spark energy while minimizing heat quenching, ensuring consistent performance. Built with DENSO’s patented Iridium-Rhodium alloy formula, this spark plug boasts the highest concentration of iridium for superior durability, even under extreme conditions exceeding 4000 Deg F. The 360-degree laser welding process guarantees a robust bond and structural integrity, making it a reliable choice for long-term use. Designed to deliver the durability of an OE-style plug while enhancing power and torque, this spark plug is a high-performance upgrade for your vehicle. With its flat seat type and advanced materials, it ensures optimal compatibility and efficiency, making it a valuable addition to any engine.

Product Features:
  • 0.4mm Iridium Center Electrode: World’s Smallest Diameter that maximizes firing potential
  • 0.7mm Needle Tip Ground Electrode: Promotes higher spark energy and less heat quenching
  • DENSO Patented Optimized Iridium-Rhodium Alloy Formula: Highest concentration of Iridium vs. competitors for greater durability
  • DENSO Patented 360 degree laser welding process: Ensuring exceptional quality bond and structural strength with the Iridium Center Electrode
  • Durability of an OE style plug combined with Power and Torque of high performance.
  • Withstands temperatures greater than 4000 degree Fahrenheit
  • Iridium TT
See More

NGK – Ruthenium HX Spark Plug (FR6AHX-S): High Ignitability & Durability (Part No.94279)

Ruthenium HX Spark Plug (FR6AHX-S): High Ignitability & Durability

from

$16.99
NGK Ruthenium HX High Ignitability spark plugs are the best in class plug for todays modern vehicles. Patented Ruthenium technology offers the most advance tip technology and delivers the highest performance and life expectancy. Created from advanced OE technology as a high ignitability plug, Ruthenium HX spark plugs come with patented, specialized OEM DFE and PSPE tip designs. NGK Ruthenium HX High Ignitability spark plugs provide a more complete fuel burn resulting in a quicker throttle response, smoother idle and better cold starts. Ruthenium center electrode provides industry leading durability.

Product Features:
  • HIGH IGNITABILITY DOUBLE FINE ELECTRODE DESIGN: Combines 0.6 millimeter ruthenium center with opposed fine wire platinum ground electrode
  • RUTHENIUM ALLOY CENTER ELECTRODE: NGK’s patented ruthenium technology produces maximum performance, ignitability & durability at high temperatures
  • PLATINUM PIN TYPE GROUND ELECTRODE: Provides more complete fuel burn, quicker throttle response, smoother idle and better cold starts
  • SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
  • TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
  • RECOMMENDED USAGE: Modern vehicles using OE DFE type spark plugs or for those seeking an aftermarket plug with the latest OE technology
See More

NGK – Laser Iridium Spark Plug (IFR7G-11KS): Fine Wire Tip for Precision (Part No.7746)

Laser Iridium Spark Plug (IFR7G-11KS): Fine Wire Tip for Precision

from

$22.99
NGK Laser Iridium spark plugs offer the best combination of performance and longevity. Engineered specifically for OE applications, Laser Iridium spark plugs are tested to the highest standards to ensure quality and durability. Iridium tipped center electrode provides durability six times harder than platinum. NGKs high grade pure alumina ceramic and 98 percent pure copper core prevents the spark plug from overheating while providing reliable starts. Most Laser Iridium spark plugs feature a platinum pad on the ground electrode for even wear in distributorless ignition systems.

Product Features:
  • ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction fine wire iridium alloy center electrode provides consistent performance
  • IRIDIUM ALLOY CENTER ELECTRODE: Iridium’s density (6x that of platinum) and extremely high melting point is perfect for modern high efficiency engines
  • PLATINUM TIP GROUND ELECTRODE: Unless OE specified, platinum protection at the ground electrode provides excellent ignitability and service life
  • SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
  • TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
  • RECOMMENDED USAGE: Best for vehicles with OE fine wire iridium alloy plugs
  • Superior Durability: The iridium-tipped center electrode is six times harder than platinum, ensuring long-lasting performance and reliability.
  • Engineered for OE Applications: Specifically designed and tested to meet the highest standards for original equipment applications, ensuring compatibility and optimal performance.
  • Gasket Seat Type: Designed with a gasket seat type for a secure fit and optimal sealing in the engine.
See More

ACDelco – Double Platinum Spark Plug: Long-Lasting Performance & Durability (Part No.41-801)

Double Platinum Spark Plug: Long-Lasting Performance & Durability

from

$10.99
ACDelco Gold (Professional) Double Platinum Spark Plug are a high quality alternative to Original Equipment (OE) parts. With a copper core and double platinum pads on the center electrode, these plugs are designed to deliver long-lasting performance. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional.

Product Features:
  • One-piece, fired-in suppressor seal blends three glass types for a gas-tight seal that helps reduce radio frequency and engine interference, regulate spark plug energy, and protect against compression pressures for long life
  • Double platinum point pad on center and ground electrode offer excellent durability and consistent voltage demands to help reduce wear on ignition system
  • Pure copper core results in cooler electrode temperature for maximized durability and fouling resistance
  • Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
  • Premium aftermarket replacement part
  • Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
See More

Autolite – Copper Resistor Spark Plug: Quick Starts & Enhanced Durability (Part No.5325)

Copper Resistor Spark Plug: Quick Starts & Enhanced Durability

from

$3.99
Autolite Copper spark plugs are designed to deliver reliable performance, ensuring quick starts and the power your vehicle demands. Featuring a copper core center electrode, these plugs excel in thermal control and resist fouling, while the high nickel alloy center and ground electrodes provide extended life and durability. The high alumina multi-rib ceramic insulator enhances thermal conductivity and insulation, offering superior strength. With a corrosion-resistant nickel-plated shell, these spark plugs are built to withstand the test of time. Engineered for optimal fuel efficiency, they help you save on gas while delivering smooth acceleration for an improved driving experience. Meeting or exceeding Original Equipment Service (OES) design Standards, Autolite Copper spark plugs are a trusted choice backed by over a century of engineering expertise and the sale of over 11 billion plugs. Designed with a flat seat type and mid-projection standard electrode, these spark plugs are the industry standard for dependable performance.

Product Features:
  • The copper core center electrode aids in thermal control and improves resistance to fouling.
  • Its specially engineered high nickel alloy center and ground electrode provides extended life.
  • The high alumina multi-rib ceramic insulator provides thermal conductivity and superior insulation for increased strength.
  • Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended periods.
  • Good Fuel Economy: Designed to optimize fuel efficiency, these spark plugs help you get the most out of every gallon of gas.
  • Smooth Acceleration: Experience seamless and smooth acceleration with Autolite Copper Core spark plugs, enhancing your driving experience.
  • OES Design Compliance: These spark plugs are crafted to meet or exceed Original Equipment Service (OES) design requirements, ensuring high-quality performance.
  • Industry Standard: Autolite Copper Core spark plugs are recognized as the industry standard, backed by over 100 years of engineering expertise and the sale of over 11 billion plugs.
See More

NGK – Laser Platinum Spark Plug (PFR7G-11S): High Ignitability & Longevity (Part No.7772)

Laser Platinum Spark Plug (PFR7G-11S): High Ignitability & Longevity

from

$23.99
NGK Laser Platinum spark plugs provide high ignitability and longer service life compared to conventional nickel spark plugs. Laser Platinum plugs are tested to the highest standards to ensure quality and durability. Engineered specifically for OE applications. Laser platinum plugs provide stable idling, superior anti-fouling, improved fuel efficiency and lower emissions. High-grade pure alumina ceramic and 98% pure copper core prevents spark plug from overheating and provides reliable starts. Most Laser Platinum spark plugs feature a platinum pad on the ground electrode for even wear in distributorless ignition systems.

Product Features:
  • ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction fine wire platinum alloy center electrode provides consistent performance
  • PLATINUM ALLOY CENTER ELECTRODE: Longer wearing and higher temperature resistance compared to traditional nickel spark plugs
  • PLATINUM TIP GROUND ELECTRODE: Unless OE specified, platinum protection at the ground electrode provides excellent ignitability and service life
  • SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
  • TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
  • RECOMMENDED USAGE: Best for vehicles with OE fine wire platinum alloy plugs
  • High Ignitability and Longer Service Life: NGK Laser Platinum spark plugs offer superior ignitability and extended service life compared to conventional nickel spark plugs.
  • Engineered for OE Applications: Specifically designed for Original Equipment (OE) applications, ensuring compatibility and optimal performance.
  • Enhanced Fuel Efficiency and Lower Emissions: These spark plugs contribute to improved fuel efficiency and reduced emissions, making them an eco-friendly choice.
  • Superior Anti-Fouling and Stable Idling: The advanced design provides stable idling and superior resistance to fouling, ensuring consistent engine performance.
See More

Autolite – Double Platinum Spark Plug: Enhanced Durability & Longer Service Life (Part No.APP3922)

Double Platinum Spark Plug: Enhanced Durability & Longer Service Life

from

$4.99
Double Platinum Spark Plug offers enhanced durability and longer service life, making it a top choice for performance-focused engines. Engineered with a platinum-to-platinum design, it minimizes gap erosion and reduces misfires, ensuring consistent ignition and reliability. The yttrium-enhanced ground electrode provides superior heat transfer, allowing the spark plug to withstand high temperatures and pressures for extended durability. Its high alumina ceramic insulator optimizes thermal conductivity and dielectric strength, while the multi-rib insulator prevents flash-over for added safety. Designed with a mid-projection standard center electrode and flat seat type, this spark plug is tailored for distributor-less ignition system (DIS) engines. Both the center and ground electrode tips are crafted from platinum, delivering superior performance compared to copper and standard platinum plugs. With a resistor type included, this spark plug is built to meet the demands of modern engines, offering exceptional value and reliability for long-term use.

Product Features:
  • Engineered with a platinum-to-platinum design that prevents gap erosion, extending the life of the spark plug.
  • The yttrium-Enhanced Ground Electrode delivers superior heat transfer that delivers more durability under high temps and pressure for greater life.
  • Its high alumina ceramic insulator provides optimum thermal conductivity and dielectric strength.
  • The multi-rib insulator prevents flash-over.
  • Designed specifically for distributor-less ignition system (DIS) engines, ensuring compatibility and optimized performance for modern engine designs.
See More

Champion – Double Platinum Power Spark Plug (REC10PYPB4): Enhanced Ignitability & Durability (Part No.7975)

Double Platinum Power Spark Plug (REC10PYPB4): Enhanced Ignitability & Durability

from

$8.99
The Double Platinum Power Spark Plug is engineered for drivers seeking enhanced performance and durability. Featuring a fine-wire platinum center electrode and a platinum pad ground electrode, this premium spark plug ensures greater wear resistance and sharper spark focus for reliable ignition. Its Heat-Active alloy optimizes electrode temperature under all engine loads, delivering consistent performance and improved ignitability. The V-trimmed ground electrode further enhances spark precision, while the flat seat design ensures a secure fit. Designed as a standard replacement, this spark plug is equipped with a resistor to minimize electrical interference. Built to maintain stable operating temperatures and withstand demanding conditions, it offers long-lasting performance and exceptional value for your vehicle.

Product Features:
  • Double Platinum Power – Premium Spark Plug. More Powerful Performance.
  • Platinum center and ground electrode for greater wear resistance
  • Maintains stable operating temperature under all engine loads
  • Fine-wire center electrode for greater ignitability
  • V-trimmed ground electrode promotes sharper spark focus
  • Heat-Active alloy allows electrodes to reach optimal temperature
See More

DENSO – Iridium Long-Life Spark Plug: OE Performance, SK22PR-M11S (Part No.3419)

Iridium Long-Life Spark Plug: OE Performance, SK22PR-M11S

from

$14.99
Engineered to meet the highest OE standards for performance, durability, and emissions, this Iridium Long-Life Spark Plug is a game-changer for your vehicle’s ignition system. Featuring DENSO’s patented Iridium Alloy with a 90% Iridium fine wire center electrode and a platinum ground electrode, it delivers exceptional spark performance and longevity, lasting up to three times longer than conventional plugs. The 360-degree laser welding process ensures a robust bond and structural integrity, even under extreme conditions exceeding 4,000 Deg F. Designed for sustained performance over 100,000 miles, it enhances engine efficiency with improved horsepower, quicker starts, and reduced misfires, even under heavy loads. Additionally, its advanced technology promotes better fuel conservation, making it a cost-effective and eco-friendly choice. With a flat seat type and premium materials, this spark plug is built to endure and optimize your driving experience.

Product Features:
  • Latest OE technology with DENSO’s patented Iridium Alloy (90 percent Ir) and fine wire center electrode
  • Platinum ground electrode for extended life
  • DENSO Patented 360 degree laser welding process: Ensuring exceptional quality bond and structural strength with the Iridium Center Electrode
  • Sustained spark performance over 100,000 miles
  • Lasts up to three times as long as conventional plugs
  • Endures extreme temperatures greater than 4,000 degrees F associated with high-performance ignition and special fuel systems
  • Iridium Long Life
  • Enhanced Engine Performance: Enjoy more horsepower, faster and easier starts, and fewer misfires under heavy loads, thanks to the advanced properties of DENSO’s Iridium alloy.
  • Fuel Efficiency: Experience better conservation of fuel at all times, contributing to overall improved engine efficiency.
See More

Autolite – Platinum Spark Plug (AP5224): Enhanced Durability & Performance (Part No.AP5224)

Platinum Spark Plug (AP5224): Enhanced Durability & Performance

from

$4.99
Platinum Spark Plug AP5224 is expertly crafted to deliver enhanced durability and performance for older engine applications. Featuring a platinum center electrode firing tip, it ensures quicker firing, smoother starts, and improved fuel efficiency. The platinum design prevents gap erosion, extending the service life of the spark plug, while the high alumina ceramic insulator provides superior thermal conductivity and insulation for added strength. Its multi-rib insulator effectively prevents flash-over, and the nickel-plated shell offers exceptional corrosion resistance for long-lasting durability. With a standard center electrode design and long projection, this performance-grade spark plug is built to optimize engine functionality. The flat seat type and nickel ground electrode tip material further enhance its reliability, making it a dependable choice for maintaining peak engine performance.

Product Features:
  • Engineered with a platinum firing tip that prevents gap erosion for longer service life.
  • Its high alumina ceramic insulator provides thermal conductivity and superior insulation for increased strength.
  • The multi-rib insulator prevents flash-over.
  • Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended life.
  • Built with a long projection center electrode design to optimize engine functionality and ensure consistent performance.
See More

Autolite Iridium – Iridium XP Fine wire Spark Plug: Improved Durability, More Focused Ignition (Part No.XP5325)

Iridium XP Fine wire Spark Plug: Improved Durability, More Focused Ignition

from

$10.99
Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Designed and engineered in the USA, the Autolite Iridium XP spark plugs feature an iridium-enhanced 0.6mm finewire design and patented platinum sidewire technology to provide better overall durability and a more focused ignition for enhanced ignitability and performance. Features double Iridium-enhanced alloy technology center electrode for improved durability and wear resistance.

Product Features:
  • 0.6 mm finewire design improves ignitability
  • Patented V-trimmed platinum sidewire technology resists wear
  • OE equivalent design is engineered for every engine
  • Designed for better overall durability with virtually no gap erosion
  • Double Iridium-Enhanced Alloy Technology Center Electrode: Offers improved durability and wear resistance for a longer-lasting spark plug.
  • Designed and Engineered in the USA: Reflects over 100 years of Autolite’s engineering experience and expertise.
  • Gasket Seat Type: Ensures a secure and proper fit for optimal performance.
See More

Autolite – Platinum Spark Plug: Enhanced Durability & Improved Performance (Part No.AP5325)

Platinum Spark Plug: Enhanced Durability & Improved Performance

from

$4.99
Autolite Platinum spark plugs are crafted for superior performance and durability, making them ideal for older engine applications. Featuring a platinum center electrode firing tip, these spark plugs ensure quicker firing, smoother starts, better acceleration, and improved fuel efficiency. The platinum firing tip resists gap erosion, extending service life, while the high alumina ceramic insulator enhances thermal conductivity and insulation for added strength. A multi-rib insulator prevents flash-over, and the nickel-plated shell offers exceptional corrosion resistance for long-lasting durability. Designed with a mid-projection standard center electrode and nickel ground electrode tip, these spark plugs deliver reliable performance under demanding conditions. Engineered in the USA with over a century of expertise and backed by the sale of over 11 billion plugs, Autolite Platinum spark plugs are a trusted choice for drivers seeking enhanced engine efficiency and durability.

Product Features:
  • Engineered with a platinum firing tip that prevents gap erosion for longer service life.
  • Its high alumina ceramic insulator provides thermal conductivity and superior insulation for increased strength.
  • The multi-rib insulator prevents flash-over.
  • Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended life.
  • Engineered in the USA: Backed by over 100 years of engineering expertise and over 11 billion plugs sold.
See More

DENSO – Iridium TT Spark Plug: Ultimate Endurance and Power, 0.4mm Iridium Tip, IK20TT (Part No.4702)

Iridium TT Spark Plug: Ultimate Endurance and Power, 0.4mm Iridium Tip, IK20TT

from

$12.99
Experience the perfect blend of durability and high performance with this spark plug, designed to deliver exceptional power and torque. Featuring a 0.4mm Iridium Center Electrode – the world’s smallest diameter – it maximizes firing potential, while the 0.7mm Needle Tip Ground Electrode enhances spark energy and minimizes heat quenching. Built with DENSO’s patented Iridium-Rhodium alloy formula, it boasts the highest concentration of Iridium for unmatched durability, enduring temperatures over 4000 Deg F. The advanced 360-degree laser welding process ensures a robust bond and structural integrity, while the Twin-Tip Technology combines a fine wire Iridium Center Electrode with a Needle Tip Platinum Ground Electrode for superior ignition. With over 100,000 miles of reliable performance, this plug enhances fuel economy, reduces emissions, and is crafted from premium materials for long-lasting endurance. Its flat seat type design further optimizes performance, making it a top-tier choice for drivers seeking ultimate efficiency and power.

Product Features:
  • 0.4mm Iridium Center Electrode: World’s Smallest Diameter that maximizes firing potential
  • 0.7mm Needle Tip Ground Electrode: Promotes higher spark energy and less heat quenching
  • DENSO Patented Optimized Iridium-Rhodium Alloy Formula: Highest concentration of Iridium vs. competitors for greater durability
  • DENSO Patented 360 degree laser welding process: Ensuring exceptional quality bond and structural strength with the Iridium Center Electrode
  • Durability of an OE style plug combined with Power and Torque of high performance.
  • Withstands temperatures greater than 4000 degree Fahrenheit
  • Iridium TT
  • Ultimate Endurance and Power: The DENSO Iridium TT Spark Plug features a 0.7mm Iridium Tip, ensuring over 100,000 miles of uncompromised performance.
  • Advanced Twin-Tip Technology: Developed from Original Equipment Specification Super Ignition Plug (SIP) design, combining a Fine Wire Iridium Center Electrode with a Needle Tip Platinum Ground Electrode.
  • Enhanced Fuel Economy and Lower Emissions: Drive around the Earth over 4 times with improved fuel efficiency and reduced emissions.
  • Premium Materials: Features an Iridium Center Electrode Tip and a Flat Seat Type for optimal performance and durability.
See More

Autolite – Copper Resistor Spark Plug: Quick Starts & Smooth Acceleration (Part No.5224)

Copper Resistor Spark Plug: Quick Starts & Smooth Acceleration

from

$3.99
Autolite Copper spark plugs are expertly crafted to ensure your vehicle delivers reliable performance with every start. Featuring a copper core center electrode, these spark plugs excel in thermal control and resist fouling, while the high nickel alloy center and ground electrode enhance durability for extended life. The high alumina multi-rib ceramic insulator boosts thermal conductivity and insulation strength, making it ideal for demanding conditions. Designed with a corrosion-resistant nickel-plated shell, these spark plugs offer long-lasting durability. With a standard center electrode design and long projection, they provide quick starts, smooth acceleration, and improved fuel economy, helping you save on fuel costs while maintaining peak performance. Perfectly suited for vehicles requiring a flat seat type and resistor-equipped spark plugs, Autolite Copper spark plugs are a dependable choice for consistent ignition and enhanced driving experience.

Product Features:
  • The copper core center electrode aids in thermal control and improves resistance to fouling.
  • Its specially engineered high nickel alloy center and ground electrode provides extended life.
  • The high alumina multi-rib ceramic insulator provides thermal conductivity and superior insulation for increased strength.
  • Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended periods.
  • Quick Starts and Smooth Acceleration: Designed to deliver quick starts and smooth acceleration, ensuring a reliable performance for your vehicle.
  • Enhanced Fuel Economy: Engineered to provide good fuel economy, helping you save on fuel costs.
See More

Autolite – Double Platinum Spark Plug: Enhanced Durability & Performance (Part No.APP5325)

Double Platinum Spark Plug: Enhanced Durability & Performance

from

$6.99
Double Platinum Spark Plug offers enhanced durability and performance with its platinum-to-platinum design, effectively reducing gap erosion and minimizing misfires for a longer service life. Engineered for distributor-less ignition system (DIS) engines, it outperforms copper and standard platinum plugs. The yttrium-enhanced ground electrode ensures superior heat transfer, maintaining durability under high temperatures and pressure. Its high alumina ceramic insulator optimizes thermal conductivity and dielectric strength, while the multi-rib insulator prevents flash-over for reliable operation. Featuring a mid-projection center electrode and flat seat type, this performance-grade spark plug is built with platinum-tipped electrodes for consistent ignition and lasting reliability. Designed to deliver exceptional value, it is a dependable choice for maintaining peak engine performance.

Product Features:
  • Engineered with a platinum-to-platinum design that prevents gap erosion, extending the life of the spark plug.
  • The yttrium-Enhanced Ground Electrode delivers superior heat transfer that delivers more durability under high temps and pressure for greater life.
  • Its high alumina ceramic insulator provides optimum thermal conductivity and dielectric strength.
  • The multi-rib insulator prevents flash-over.
  • Designed with a mid-projection center electrode and flat seat type to ensure consistent ignition and reliable performance in demanding conditions.
See More

Autolite – Double Platinum Spark Plug: Enhanced Durability & Longer Service Life (Part No.APP5224)

Double Platinum Spark Plug: Enhanced Durability & Longer Service Life

from

$6.99
Double Platinum Spark Plug offers enhanced durability and longer service life, making it a top choice for performance-focused engines. Featuring a platinum-to-platinum design, it minimizes gap erosion and reduces misfires, ensuring consistent ignition and reliability. The yttrium-enhanced ground electrode provides superior heat transfer, allowing the spark plug to withstand high temperatures and pressures for extended durability. Its high alumina ceramic insulator optimizes thermal conductivity and dielectric strength, while the multi-rib insulator prevents flash-over for added safety. Designed with a long projection center electrode and platinum tip materials, this spark plug delivers precision and efficiency in distributor-less ignition system (DIS) engines. Engineered in the USA with over a century of expertise and backed by the sale of more than 11 billion plugs, it combines innovation and proven performance. Whether you’re upgrading for reliability or performance, this flat-seat spark plug is built to meet the demands of modern engines.

Product Features:
  • Engineered with a platinum-to-platinum design that prevents gap erosion, extending the life of the spark plug.
  • The yttrium-Enhanced Ground Electrode delivers superior heat transfer that delivers more durability under high temps and pressure for greater life.
  • Its high alumina ceramic insulator provides optimum thermal conductivity and dielectric strength.
  • The multi-rib insulator prevents flash-over.
  • Engineered in the USA: Backed by over 100 years of engineering expertise and more than 11 billion plugs sold.
See More

NGK – Iridium IX Spark Plug (LFR6AIX-11): Extreme Ignitability & Durability (Part No.6619)

Iridium IX Spark Plug (LFR6AIX-11): Extreme Ignitability & Durability

from

$17.99
NGK Iridium IX spark plugs are specifically designed for the performance enthusiast. Iridium IX provides outstanding acceleration, high fuel efficiency and durability. NGK Iridium IX plugs offer extreme ignitability and exceptional anti-fouling. Tapered c

Product Features:
  • SINGLE IRIDIUM TIP: Fine wire 0.6 millimeter iridium tip center electrode ensures high durability and a consistently stable spark
  • IRIDIUM ALLOY CENTER ELECTRODE: Iridium’s density (6x that of platinum) and extremely high melting point is perfect for modern high efficiency engines
  • TAPERED CUT GROUND ELECTRODE: Reduced quenching design produces outstanding ignitability, improved acceleration, fuel efficiency and durability
  • SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
  • TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
  • RECOMMENDED USAGE: Modified or high performance applications, or as an upgrade to OE nickel alloy spark plugs
See More

E3 – DiamondFIRE Spark Plug: More Power & Fuel Efficiency (Part No.E3.48)

DiamondFIRE Spark Plug: More Power & Fuel Efficiency

from

$8.49
The Premium DiamondFire Automotive Spark Plug is engineered to deliver peak performance and efficiency for your vehicle. Featuring E3’s patented Diamond Fire edge-to-edge ground electrode, it ensures a faster, more complete burn for smoother acceleration and idle. The innovative “diamond-shaped” side wire electrode enhances combustion by quickly igniting the air/fuel mixture, resulting in a larger and faster flame kernel. This translates to improved power output – up to 6% on average – and better fuel efficiency, saving you money while reducing engine carbon deposits. Constructed with durable nickel center and ground electrode tips, this spark plug is built to last. Pre-gapped at the factory for hassle-free installation, it provides consistent, reliable performance. With its advanced design, this spark plug maximizes the energy from every drop of fuel, making it an excellent choice for drivers seeking enhanced power, efficiency, and longevity.

Product Features:
  • E3’s Diamond Fire edge to edge ground electrode provides maximum performance with increased efficiency and a faster more complete burn.
  • Smoother Acceleration & Idle – The faster flame initiated by the spark plug results in a more complete burn of the ingested fuel charge. More pressure is created against the piston more fuel is put to work
  • Energy – Power output improved up to 6% on average in the typical operating ranges. Results will vary.
  • Efficiency – The “diamond shaped” side wire electrode projects the combustion spark in a way that more quickly ignites the air/fuel mixture, thereby creating a significantly faster and larger flame kernel. The result is that more fuel is put to work durin
  • E3’s patented Diamond Fire Technology provides a cleaner burning combustion, which translates into fuel savings and reduced engine carbon deposits
  • The Spark Plugs are pre-gapped at the factory and cannot be adjusted.
See More

E3 – DiamondFIRE Automotive Spark Plug: More Power, Saves Gas (Part No.E3.68)

DiamondFIRE Automotive Spark Plug: More Power, Saves Gas

from

$8.49
The Spark Plugs are the product of years of fundamental research in the combustion field. The unique patented electrode configuration of these new The spark plugs increases the amount of combustion pressure created during each power stroke of an engine, which results in a marked increase in power output, fuel economy, and reduced emissions in all gasoline engines. E3.68 is a 14mm, 1.000 reach plug with a gasket seat. It fits a wide variety of late model applications, especially Hemi applications. E3.68 is widely stocked in automotive retail stores. The automotive plugs have three legs securing the Diamond FIRE electrode to the shell. This allows for excellent heat transfer, and helps to create more turbulence in the cylinder. The patented Diamond FIRE side wire is proven to increase power, reduce fuel consumption and improve hydrocarbon emissions in long-term use.

Product Features:
  • E3’s Diamond Fire edge to edge ground electrode provides maximum performance with increased efficiency and a faster more complete burn
  • Smoother Acceleration & Idle – The faster flame initiated by the spark plug results in a more complete burn of the ingested fuel charge. More pressure is created against the piston more fuel is put to work
  • Energy – Power output improved up to 6% on average in the typical operating ranges. Results will vary.
  • Efficiency – The “diamond shaped” side wire electrode projects the combustion spark in a way that more quickly ignites the air/fuel mixture, thereby creating a significantly faster and larger flame kernel. The result is that more fuel is put to work durin
  • E3’s patented Diamond Fire Technology provides a cleaner burning combustion, which translates into fuel savings and reduced engine carbon deposits
  • The Spark Plugs are pre-gapped at the factory and cannot be adjusted.
  • Wide Compatibility: E3.68 spark plugs are 14mm with a 1.000 reach and a gasket seat, fitting a wide variety of late model applications, especially Hemi engines.
  • Enhanced Heat Transfer: The three legs securing the Diamond FIRE electrode to the shell ensure excellent heat transfer and create more turbulence in the cylinder for better combustion.
  • Widely Available: E3.68 spark plugs are widely stocked in automotive retail stores, making them easily accessible for consumers.
See More

E3 – DiamondFIRE Automotive Spark Plug: More Power & Fuel Efficiency (Part No.E3.56)

DiamondFIRE Automotive Spark Plug: More Power & Fuel Efficiency

from

$8.49
The Premium DiamondFire Automotive Spark Plug is engineered to deliver peak performance and efficiency for your vehicle. Featuring E3’s patented Diamond Fire edge-to-edge ground electrode, it ensures a faster, more complete burn for smoother acceleration and idle. The innovative “diamond-shaped” side wire electrode enhances combustion by igniting the air/fuel mixture more quickly, resulting in a larger flame kernel and improved power output – up to 6% on average. Designed with nickel center and ground electrode tips, this spark plug offers durability and consistent performance. Its cleaner-burning combustion reduces engine carbon deposits and promotes fuel savings, making it an eco-friendly choice. Pre-gapped at the factory for hassle-free installation, this spark plug is a perfect blend of advanced technology and convenience, ensuring your engine runs at its best.

Product Features:
  • E3’s Diamond Fire edge to edge ground electrode provides maximum performance with increased efficiency and a faster more complete burn
  • Smoother Acceleration & Idle – The faster flame initiated by the spark plug results in a more complete burn of the ingested fuel charge. More pressure is created against the piston more fuel is put to work
  • Energy – Power output improved up to 6% on average in the typical operating ranges. Results will vary.
  • Efficiency – The “diamond shaped” side wire electrode projects the combustion spark in a way that more quickly ignites the air/fuel mixture, thereby creating a significantly faster and larger flame kernel. The result is that more fuel is put to work durin
  • E3’s patented Diamond Fire Technology provides a cleaner burning combustion, which translates into fuel savings and reduced engine carbon deposits
  • The Spark Plugs are pre-gapped at the factory and cannot be adjusted.
See More

DENSO – Iridium Power Spark Plug: Maximum Spark Energy, 0.4mm Iridium Tip, IKH20 (Part No.5344)

Iridium Power Spark Plug: Maximum Spark Energy, 0.4mm Iridium Tip, IKH20

from

$12.29
The Iridium Power Spark Plug features the world’s smallest Iridium Center Electrode at just 0.4mm, delivering unmatched spark precision for maximum combustion and performance. Engineered with a patented 360-degree laser welding assembly process, it ensures durability and reliability even under extreme conditions. The U-groove and taper-cut ground electrode design optimizes flame propagation, while its ability to withstand temperatures exceeding 4000 Deg F guarantees long-lasting performance. Burnished nickel plating enhances resistance to high temperatures and corrosion, making it ideal for a wide range of applications, including classic and collector cars. This spark plug requires 5,000 fewer volts to fire compared to conventional plugs, ensuring superior performance, enhanced horsepower, and improved fuel efficiency. Whether you’re seeking faster starts, fewer misfires under heavy loads, or better overall engine efficiency, this Iridium Power Spark Plug is designed to deliver exceptional results.

Product Features:
  • World’s smallest Iridium Center Electrode (0.4mm) for improved spark for maximum combustion
  • Patented 360-degree laser welding assembly process
  • U-groove and taper cut ground electrode to maximize flame propagation.
  • Withstands temperatures greater than 4000 degree Fahrenheit
  • Burnished nickel plating for high temperature endurance and superior corrosion resistance
  • Wide range of part numbers for thousands of applications, including classic and collector cars
  • Iridium Power
  • Superior Performance: This spark plug requires 5,000 less volts to fire compared to conventional spark plugs, providing maximum performance even under extreme conditions.
  • Enhanced Horsepower and Efficiency: Experience more horsepower, faster and easier starts, fewer misfires under heavy loads, and better fuel efficiency with the DENSO Iridium Power spark plug.
See More

NGK – Laser Iridium Spark Plug (IZFR6K-11S): Fine Wire Tip for Precision (Part No.5266)

Laser Iridium Spark Plug (IZFR6K-11S): Fine Wire Tip for Precision

from

$27.99
NGK Laser Iridium spark plugs offer the best combination of performance and longevity. Engineered specifically for OE applications, Laser Iridium spark plugs are tested to the highest standards to ensure quality and durability. Iridium tipped center elect

Product Features:
  • ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction fine wire iridium alloy center electrode provides consistent performance
  • IRIDIUM ALLOY CENTER ELECTRODE: Iridium’s density (6x that of platinum) and extremely high melting point is perfect for modern high efficiency engines
  • PLATINUM TIP GROUND ELECTRODE: Unless OE specified, platinum protection at the ground electrode provides excellent ignitability and service life
  • SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
  • TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
  • RECOMMENDED USAGE: Best for vehicles with OE fine wire iridium alloy plugs
See More

DENSO – Double Platinum Spark Plug: OE Performance, lasts 60K+ Miles, PKJ20CR-L11 (Part No.3247)

Double Platinum Spark Plug: OE Performance, lasts 60K+ Miles, PKJ20CR-L11

from

$12.99
Engineered for precision and reliability, this Double Platinum Spark Plug is crafted to meet the highest OE performance, durability, and emissions standards. Featuring OE-grade platinum on both the center and ground electrodes, it ensures superior thermal conductivity and sustained spark performance for over 60,000 miles. The premium shell construction with machine-rolled threads enhances durability and provides a secure fit, while the flat seat type ensures optimal compatibility with your vehicle. Designed to reduce secondary required voltage and increase ignition efficiency, this spark plug delivers consistent performance and helps minimize shop comebacks, ensuring customer satisfaction. With its double platinum design and adherence to OE standards, it offers exceptional value and long-lasting performance for your engine.

Product Features:
  • OE grade platinum on both center and ground electrodes
  • Premium shell construction with machine-rolled threads
  • Superior thermal conductivity
  • Sustained spark performance over 60,000 miles
  • Reduced secondary required voltage, increased ignition efficiency
  • Satisfied customers, reduced shop comebacks
  • Double Platinum
  • OE Performance: Designed to meet original equipment (OE) standards for optimal performance in your vehicle.
See More

Autolite – Copper Resistor Spark Plug: Quick Starts & Reliable Performance (Part No.3922)

Copper Resistor Spark Plug: Quick Starts & Reliable Performance

from

$3.99
Autolite Copper spark plugs are crafted to ensure reliable performance and quick starts, making them an ideal choice for your vehicle or application. Featuring a copper core center electrode, these spark plugs excel in thermal control and resist fouling, ensuring consistent functionality. The high nickel alloy center and ground electrodes are designed for extended life, while the mid-projection standard electrode design enhances ignition efficiency. Built with a high alumina multi-rib ceramic insulator, these spark plugs offer superior thermal conductivity and insulation for added strength. The nickel-plated shell provides exceptional corrosion resistance, ensuring durability over extended use. With a flat seat type and integrated resistor, these spark plugs deliver dependable performance while maintaining compatibility with regular-grade applications.

Product Features:
  • The copper core center electrode aids in thermal control and improves resistance to fouling.
  • Its specially engineered high nickel alloy center and ground electrode provides extended life.
  • The high alumina multi-rib ceramic insulator provides thermal conductivity and superior insulation for increased strength.
  • Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended periods.
  • The mid-projection standard electrode design enhances ignition efficiency, ensuring optimal performance for regular-grade applications.
See More

Top-Rated Ignition and Tune-Up Products Brands For Your 2008 Honda Civic

Shop for the best-rated brands offering Ignition and Tune-Up Products and other products for your 2008 Honda Civics. Below you’ll find some of our best rated Ignition and Tune-Up Products from NGK, DENSO, and Autolite, and more. Ignition and Tune-Up Products from these brands that fit a 2008 Civic start at just $3.99 and are rated as high as 4.8 stars. OEM and aftermarket Ignition and Tune-Up Products don’t get more top quality, durable, and affordable than from the brands below.

Popular NGK 2008 Honda Civic Ignition and Tune-Up Products

When it comes to maintaining or upgrading your 2008 Honda Civic, using quality Ignition and Tune-Up Products is essential to ensure durability and a perfect fit. NGK ticks all of those boxes. We offer a wide selection of NGK Ignition and Tune-Up Products, specifically designed for the 2008 Honda Civic. With over 3 NGK brand Ignition and Tune-Up Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $16.99, with an average price of just $21.32. Plus, with over 29 customer reviews and an average rating of 4.8 stars, you can trust that our NGK Ignition and Tune-Up Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
Laser Platinum Spark Plug (PFR7G-11S): High Ignitability & Longevity
from $23.99
(8)
Laser Platinum Spark Plug (PFR7G-11S): High Ignitability & Longevity
“Best price around. Highly recommended for my S2000”
Ruthenium HX Spark Plug (FR6AHX-S): High Ignitability & Durability
from $16.99
(4)
Ruthenium HX Spark Plug (FR6AHX-S): High Ignitability & Durability
“I was a bit skeptical at first but i set them put them in and immediately could tell took it out and it ran like new again all my power and torque has”
Laser Iridium Spark Plug (IFR7G-11KS): Fine Wire Tip for Precision
from $22.99
(17)
Laser Iridium Spark Plug (IFR7G-11KS): Fine Wire Tip for Precision
“Don’t really notice a difference with just new spark plugs but i beard it’s a really good brand”

Popular DENSO 2008 Honda Civic Ignition and Tune-Up Products

DENSO auto parts is one of the highest quality Ignition and Tune-Up Product brands in the market. Any 2008 Honda Civic owner should feel confident when installing genuine DENSO parts in their vehicle. To ensure the best fit and performance for your 2008 Civic, Advance Auto Parts carries a full inventory of 3 DENSO Ignition and Tune-Up Products. Plus you will be keeping your Honda in peak condition while saving money because prices on these DENSO Ignition and Tune-Up Products range from $12.99 to $14.99, plus, with more than 171 customer reviews and an impressive 4.6 stars average rating, you can be confident the Fram Ignition and Tune-Up Products below will deliver on both quality and value.
Iridium Long-Life Spark Plug: OE Performance, SK22PR-M11S
from $14.99
(2)
Iridium Long-Life Spark Plug: OE Performance, SK22PR-M11S
“These were purchased to replace my worn out plugs. Received package as advertised. Installed with no issues. Engine started first try.”

FAQs for 2008 Honda Civic Ignition and Tune-Up Products

Which Ignition and Tune-Up Products are best-sellers for 2008 Honda Civics?

Out of 79 Ignition and Tune-Up Products that fit 2008 Honda Civics, the following parts are the top sellers:

What’s the price range for 2008 Honda Civic Ignition and Tune-Up Products?

Ignition and Tune-Up Product prices for the 2008 Honda Civic start at $2.99 and go up to $460.99 for the most premium parts.

What’s the average price of a Ignition and Tune-Up Product for a 2008 Honda Civic?

The average price for Ignition and Tune-Up Products for the 2008 Honda Civic is $54.02. Keep in mind the variety of part types within our Ignition and Tune-Up Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Ignition and Tune-Up Products for other Honda Civic model years?

Yes, we currently carry Ignition and Tune-Up Products for 51 model years of Honda Civics between 1973 and 2025. Ignition and Tune-Up Products are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

What are the cheapest Ignition and Tune-Up Products for my 2008 Honda Civic?

What are the top-rated Ignition and Tune-Up Products that fit the 2008 Honda Civic?

Out of 5,152 reviews by customers, our 2008 Honda Civic Ignition and Tune-Up Products have an average customer rating of . These are some of the highest-rated Ignition and Tune-Up Product types for the 2008 Honda Civic and their top-rated products:

What types of Ignition and Tune-Up Products do you sell for my 2008 Honda Civic?

As of 11/2/25, these are some of the most in-demand types of Ignition and Tune-Up Products for a 2008 Honda Civic:

Can I get help with 2008 Honda Civic Ignition and Tune-Up Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Honda Ignition and Tune-Up Products and more.

What is your return policy for Honda Civic Ignition and Tune-Up Products?

Advance Auto Parts keeps returns simple. For new Honda Civic Ignition and Tune-Up Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.