2008 GMC Sierra 2500 HD Fuel Injectors

Essential 2008 GMC Sierra 2500 HD Fuel Injectors

ACDelco – GM Original Equipment Fuel Injector Seal Kit (Part No.C1060205441ACD)

GM Original Equipment Fuel Injector Seal Kit

from

$28.49
The ACDelco GM Original Equipment Fuel Injector Seal Kit is a GM-recommended replacement component that provides the same performance, durability, and service life as your factory original equipment.

Product Features:
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Carquest Premium – Fuel Injector Seal Kit (Part No.AC20722)

Fuel Injector Seal Kit

from

$26.99
Product Features:
  • Premium OE quality materials
  • Includes injector body o-ring
  • Includes return port o-ring
  • Includes copper combustion seal
See More

Cardone – Fuel Injector Installation Kit (Part No.2K-104)

Fuel Injector Installation Kit

from

$75.99
CARDONE Diesel Fuel Injector Kits conveniently contain all components needed to complete the entire job, while other suppliers sell each component individually. Each kit includes everything required for installation, ensuring leak free operation and reduced crank times due to fuel leaks. Each kit contains 100% new components, ensuring trouble-free installation, keeping both you and your vehicle on the road for many years to come.

Product Features:
  • All in one kit makes the installation job easier and faster, as these components are typically sold separately from O.E.M. suppliers
  • Each installation kit includes everything required (gaskets, O-rings, sealing washers, etc.) for proper installation
  • Guaranteed fit and function
  • Meets or exceeds O.E.M. performance
See More

Cardone – Fuel Injector Installation Kit (Part No.2K-102)

Fuel Injector Installation Kit

from

$102.99
CARDONE Diesel Fuel Injector Kits conveniently contain all components needed to complete the entire job, while other suppliers sell each component individually. Each kit includes everything required for installation, ensuring leak free operation and reduced crank times due to fuel leaks. Each kit contains 100% new components, ensuring trouble-free installation, keeping both you and your vehicle on the road for many years to come.

Product Features:
  • All in one kit makes the installation job easier and faster, as these components are typically sold separately from O.E.M. suppliers
  • Each installation kit includes everything required (gaskets, O-rings, sealing washers, etc.) for proper installation
  • Guaranteed fit and function
  • Meets or exceeds O.E.M. performance
See More

GB Remanufacturing – Fuel Injector O-Ring (Part No.C1012224185GBR)

Fuel Injector O-Ring

from

$10.99
Fuel Injector O-Ring

Mahle – FI Throttle Body Mou (Part No.C7001295154MAH)

FI Throttle Body Mou

from

$9.74
FI Throttle Body Mou

Carquest Premium – Fuel Filter Base & Hand Primer Seal Kit (Part No.AC20702)

Fuel Filter Base & Hand Primer Seal Kit

from

$26.99
Product Features:
  • Premium OE quality materials
See More

Felpro – Fuel Injector O-Ring Set (Part No.ES 73186)

Fuel Injector O-Ring Set

from

$31.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Carquest Premium – Fuel Injector Seal Kit (Part No.AS009)

Fuel Injector Seal Kit

from

$2.99
CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.

Product Features:
  • Premium OE quality materials
  • Services one injector
See More

GM Genuine Parts – Fuel Injector Retainer Kit with Clip (Part No.12570620)

Fuel Injector Retainer Kit with Clip

from

$13.79
GM Genuine Parts Fuel Injector and Insulator Retainer Kits are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

GM Genuine Parts – Multi-Purpose Air Sensor (Part No.23262343)

Multi-Purpose Air Sensor

from

$114.99
GM Genuine Parts Multi Purpose Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • Original equipment parts are designed to work with your GM vehicle safety systems – aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Carquest Premium – Mass Air Flow Sensor (MAF) – 100% NEW (Part No.MQ7387)

Mass Air Flow Sensor (MAF) - 100% NEW

from

$89.99
Advance Auto Parts is proud to carry all new mass air flow sensors that use high-quality components with the highest quality standards.

Product Features:
  • CARQUEST MAF use all new high-quality components at the highest quality standards.
  • Manufactured with new and advanced technology to perform, fit and function at OE specifications.
  • All new product that is tested with OEM equipment to OEM standards
  • Outperforms competition when tested in extreme environmental conditions
See More

Felpro – UPPER INTAKE MANIFOLD GASKET/ PLENUM GASKET (Part No.72946)

UPPER INTAKE MANIFOLD GASKET/ PLENUM GASKET

from

$3.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Carquest – Fuel Injection Pressure Regulator (Part No.24145)

Fuel Injection Pressure Regulator

from

$294.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • Our fuel pressure regulators are application specific for the perfect fit and form
  • A robust engineering design for greater resistance to leakage
  • With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
  • BWD is a global manufacturer of emission components, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

Dorman – Fuel Control Actuator (Part No.904-572)

Fuel Control Actuator

from

$279.99
This fuel pressure regulator is engineered to match the function of the original equipment regulator on specified vehicles. It is engineered to help ensure proper fuel injection pressure when the original regulator has failed or is malfunctioning.

Product Features:
  • Direct replacement – this fuel pressure regulator is designed to match the fit and function of the original equipment regulator on specified vehicle
  • Ideal solution – engineered to help ensure proper fuel injection pressure when the original regulator has failed or is malfunctioning
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Carquest – Fuel Injection Pressure Regulator (Part No.24027)

Fuel Injection Pressure Regulator

from

$82.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • Application-specific to ensure the proper fit and form
  • Precision-engineered pressure regulators for proper fuel delivery and engine performance
  • As a global manufacturer, we have complete control of the manufacturing process, from components to finished product?
See More

Dorman – Fuel Cooler (Part No.E3025702810DOR)

Fuel Cooler

from

$355.95
Fuel Cooler

Dorman – Diesel Fuel Cooler (Part No.904-180)

Diesel Fuel Cooler

from

$206.99
This fuel cooler is designed to match the fit and function of the original cooler on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this fuel cooler is designed to match the fit and function of the original cooler on specified vehicles
  • Restores functionality – reliable replacement for an original cooler that has failed due to collision, road debris or corrosion
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

aFe POWER – Sprint Booster (Part No.77-14009)

Sprint Booster

from

$297.99
Automobiles in the 21st century have replaced the more conventional throttle cable technology for an ECM (Electronic Control Module) that translates pedal travel into electronic signals in order to provide power to the wheels. The ETC system (Electronic Throttle Control), also known as drive-by-wire, has the unfortunate downside of delayed throttle response and subdued acceleration, creating problems in certain circumstances such as up-hill starts, quick gear changes, overtaking, etc. The Sprint Booster aims to overcome this throttle response delay for ETC-equipped vehicles, providing crisp on-tap acceleration at the driver’s disposal.

Product Features:
  • Reduces Throttle Response Time
  • Improves Acceleration
  • Easy To Install
  • Does Not Affect The Vehicles Electronic System
See More

GM Genuine Parts – Fuel Injection Throttle Control Actuator Module (Part No.12590008)

Fuel Injection Throttle Control Actuator Module

from

$182.99
GM Genuine Parts Fuel Injection Throttle Control Actuator Modules are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These modules are electrically operated motor assemblies that control throttle plates. They receive an electrical signal from the engine control module and open throttle plates based on input from the accelerator pedal module. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

aFe POWER – Sprint Booster (Part No.77-14003)

Sprint Booster

from

$297.99
Silver Bullet throttle body spacers create turbulence in the air flow at the point just prior entry into the engine increasing horsepower, torque and improving throttle response and fuel efficiency. Silver Bullet throttle body spacers are constructed out of durable T-6061 billet aluminum and using a unique serrated/helix entry to create turbulence at the manifold while eliminating the annoying whistle found in other helix only throttle spacers.

Product Features:
  • Reduces Throttle Response Time
  • Improves Acceleration
  • Easy To Install
  • Does Not Affect The Vehicles Electronic System
See More

GM Genuine Parts – Fuel Pressure Relief Valve Cap (Part No.214-1044)

Fuel Pressure Relief Valve Cap

from

$6.29
GM Genuine Parts Fuel Pressure Relief Valve Caps are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

ACDelco – Fuel Injector (Part No.C1000385184ACD)

Fuel Injector

from

$69.05
Fuel Injector

Carquest – Fuel Injector (Part No.67487)

Fuel Injector

from

$124.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • Precision-wound and precision-trimmed solenoid windings allow the computer to command efficient delivery of fuel
  • High-temp Viton® O-rings enable prolonged sealing of injector under extreme heat conditions
  • Fiber-optic yttrium aluminum garnet “YAG” laser welding and 100 million cycle testing ensure quality in every box
See More

ACDelco – Sequential Multi-Port Fuel Injector Assembly (Part No.217-3412)

Sequential Multi-Port Fuel Injector Assembly

from

$47.99
ACDelco GM Original Equipment Fuel Injectors are electro-magnetic valves that meter fuel into the engine’s intake manifold or cylinders for combustion, and are GM-recommended replacements for your vehicle’s original components. The engine control module (ECM) operates the injector by applying an electric current to the injector solenoid winding, causing the needle valve to open, and allowing pressurized fuel to be atomized into the intake airstream. These original equipment fuel injectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
  • Atomizes fuel into the engine’s intake manifold or cylinders, as part of the fuel and engine management system
  • Allows for a quick throttle response
  • Assists in cold engine starts
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Carquest Premium – Remanufactured Fuel Injector (Part No.A211-1803)

Remanufactured Fuel Injector

from

$58.99
CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.

Product Features:
  • Each unit is 100% tested to OE specifications
  • Includes new O-rings and seals made of premium OE quality materials
  • Includes application specific technical bulletin, where applicable
See More

Carquest Premium – Remanufactured Fuel Injector (Part No.AD25053)

Remanufactured Fuel Injector

from

$531.99
CARQUEST premium remanufactured injectors are completely torn down, ultrasonically cleaned, inspected and remanufactured using premium components. Each injector is 100% tested on a sophisticated flow bench under multiple operating parameters to meet or exceed OE specifications.

Product Features:
  • Each unit is 100% tested to OE specifications.
  • Includes 100% replacement of nozzle to ensure accurate and precise injection under all operating parameters.
  • Includes all new premium quality o-rings and seals.
  • Includes copper combustion gasket.
  • Includes application specific technical bulletin which highlights critical aspects of the job and offers technical tips for proper installation.
See More

Carquest Premium – Remanufactured Fuel Injector (Part No.A511-1133)

Remanufactured Fuel Injector

from

$74.99
CARQUEST’s line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and o-rings.

Product Features:
  • Each unit is 100% tested to OE specifications.
  • Includes new o-rings and seals made of premium OE quality materials.
  • Includes application specific technical bulletin, where applicable.
See More

2008 GMC Sierra 2500 HD Fuel Injectors

Maybe you’re in the middle of a full rebuild of that 2008 GMC Sierra 2500 HD. Maybe you just need a couple of Fuel Injectors. Either way, Advance Auto Parts has 45 different Fuel Injectors in our inventory ranging from $2.99 to $859.99. That means you can find the exact parts or products you need to keep that 2008 GMC Sierra 2500 HD running smoothly.

Fuel Injectors are only as good as their brand. We stock 15 different brands to make sure you have plenty of trusted parts to choose from for your 2008 GMC Sierra 2500 HD. Felpro, Carquest Premium, and Delphi are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Fuel Injectors for your 2008 GMC Sierra 2500 HD, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 372 reviews in this category, some of the top rated parts include Mass Air Flow Sensor with 3.8 stars and Remanufactured Fuel Injector with 3.0 stars.

So if you’re in the market for aftermarket Fuel Injectors to keep your 2008 GMC Sierra 2500 HD rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Fuel Injectors Brands To Make Your 2008 GMC Sierra 2500 HD Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2008 GMC Sierra 2500 HD demands trusted brand parts and products to keep it running. Many trusted brands of Fuel Injectors make up Advance Auto Parts’ inventory, and all are ready to help make your Sierra 2500 HD the best it can be. Be sure to browse some of our top Fuel Injectors brands and parts.

Popular GM Genuine Parts Fuel Injectors

We carry GM Genuine Parts parts in our stock across Fuel Injector Seal Kits categories, plus more. For a 2008 GMC Sierra 2500 HD, our most popular GM Genuine Parts Fuel Injectors include:
Fuel Injector O-Ring Kit with Assorted O-Rings
from $29.99
(1)
Fuel Injector O-Ring Kit with Assorted O-Rings
Fuel Injector Seal Kits

FAQs for 2008 GMC Sierra 2500 HD Fuel Injectors

What are the most purchased Fuel Injectors for the 2008 GMC Sierra 2500 HD?

Out of 45 Fuel Injectors for the 2008 GMC Sierra 2500 HD, the most popular in our inventory are:
Mass Air Flow Sensor (MAF) - 100% NEW
from $64.99
(1)
Mass Air Flow Sensor (MAF) – 100% NEW
Air Flow Meters and Mass Air
Fuel Injector Seal Kit
from $2.99
This product is not rated
Fuel Injector Seal Kit
Fuel Injector O-Ring Kits
Mass Air Flow Sensor (MAF) - 100% NEW
from $89.99
This product is not rated
Mass Air Flow Sensor (MAF) – 100% NEW
Air Flow Meters and Mass Air

What are the top-rated 2008 GMC Sierra 2500 HD Fuel Injectors?

Top-rated Fuel Injectors for your 2008 GMC Sierra 2500 HD based on customer reviews/ratings are:
Mass Air Flow Sensor
from $106.99
(6)
Mass Air Flow Sensor
“Good product”
Remanufactured Fuel Injector
from $49.99
(2)
Remanufactured Fuel Injector
“Perfect fit. Easy install once I found out how to do it. Lol”
Mass Air Flow Sensor (MAF) - 100% NEW
from $128.99
(1)
Mass Air Flow Sensor (MAF) – 100% NEW
“Don’t buy this. I went theough a couple. The truck didnt work until I put in AC Delco.”