2008 Freightliner Sprinter 3500 Engine Cooling Parts

Manufactured with OEM quality materials and safety standards by an OE Supplier. This integrated thermostat housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant as well as the design and function of the housing. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

• High grade stainless steel and copper construction
• Meets or exceeds OEM standards
• Consistent and precise response to cooling system needs
• Original equipment design for worry-free direct fit replacement
• 100% tested and calibrated

Manufactured with OEM quality materials and safety standards by an OE Supplier. This integrated thermostat housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant as well as the design and function of the housing. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

• High grade stainless steel and copper construction
• Meets or exceeds OEM standards
• Consistent and precise response to cooling system needs
• Original equipment design for worry-free direct fit replacement
• 100% tested and calibrated

Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:

• 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
• Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
• Brass sensor housing precision machined to meet or exceed OE thermal conductivity
• OE precision matched thermistor position for correct output parameters
• Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.

Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:

• 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
• Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
• Brass sensor housing precision machined to meet or exceed OE thermal conductivity
• OE precision matched thermistor position for correct output parameters
• Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.

The Graf Water Pump contains no remanufactured parts and is produced using an optimized all metal impeller design to assist in cooling under high RPM, and performance demands. Selection of raw materials, reliability of machinery and production processes, stringent controls throughout the production process, from melting to fitting, as well as reliability tests performed using equipment able to determine true performance, go to ensure this product is a real guarantee of safety and long life. The Graf water pump is centrifugal in type and comprises a bladed rotor linked by means of a shaft (which rotates on bearings housed in a support) to the drive gear; the seal between the pump and the motor block is guaranteed by a gasket, while the inside of the pump is guaranteed by a mechanical seal. Component parts: Impeller: supplies the fluid with the necessary energy to cover the entire cooling circuit. Mechanical seal: ensures fluid seal inside the pump. Bearing: transmits movement to the impeller and supports any ventilation parts. Entrainment part: for transmitting movement to the bearing. Pump body: supports the basic pump component parts and conveys the coolant in the motor block.

Product Features:

• All the component parts fitted are pre-tested to evaluate durability, performance and reliability.
• The bearings undergo a durability test equivalent to nominal lifespan and are then inspected to assess integrity.
• The mechanical seals are tested in extreme coolant temperature conditions according to predefined cycles.
• The shape of the impellers is optimized thanks to the use of prototypes on which flow and performance tests are performed.
• On both the entrainment parts and the bodies, the choice of materials and/or technologies different to original ones is made on the basis of structural and mechanical tests.
• After assembly all the pumps undergo seal tests on units that reject those with leaks above set limits.

The Graf Water Pump contains no remanufactured parts and is produced using an optimized all metal impeller design to assist in cooling under high RPM, and performance demands. Selection of raw materials, reliability of machinery and production processes, stringent controls throughout the production process, from melting to fitting, as well as reliability tests performed using equipment able to determine true performance, go to ensure this product is a real guarantee of safety and long life. The Graf water pump is centrifugal in type and comprises a bladed rotor linked by means of a shaft (which rotates on bearings housed in a support) to the drive gear; the seal between the pump and the motor block is guaranteed by a gasket, while the inside of the pump is guaranteed by a mechanical seal. Component parts: Impeller: supplies the fluid with the necessary energy to cover the entire cooling circuit. Mechanical seal: ensures fluid seal inside the pump. Bearing: transmits movement to the impeller and supports any ventilation parts. Entrainment part: for transmitting movement to the bearing. Pump body: supports the basic pump component parts and conveys the coolant in the motor block.

Product Features:

• All the component parts fitted are pre-tested to evaluate durability, performance and reliability.
• The bearings undergo a durability test equivalent to nominal lifespan and are then inspected to assess integrity.
• The mechanical seals are tested in extreme coolant temperature conditions according to predefined cycles.
• The shape of the impellers is optimized thanks to the use of prototypes on which flow and performance tests are performed.
• On both the entrainment parts and the bodies, the choice of materials and/or technologies different to original ones is made on the basis of structural and mechanical tests.
• After assembly all the pumps undergo seal tests on units that reject those with leaks above set limits.

CALORSTAT thermostatic components (bellows thermostats for water temperature regulation), followed by the use of a different technology based on the wax expansion. CALORSTAT by Vernet has produced thermostatic elements for more than 50 years. A vast amount of experience and continuous development has enabled the Company to remain the world leader in this field. Throughout the world, Vernet is regarded as a valued partner by manufacturers, large and small, in the Sanitary, Heating and Automotive industry.

Product Features:

• Comfort enhancement by a faster cabine warming
• CO2 emissions and fuel consumption reduction
• Thermostat opening driven by the ECU (electrical thermostat)
• An adaptation of the control strategies to the vehicle use (electrical thermostat)

Thermostat

This replacement engine coolant reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is engineered and manufactured to match the fit and function of the original part.

Product Features:

• Direct replacement – this engine coolant reservoir matches the fit and function of the original part
• Ideal solution – engineered for a seamless installation
• Durable construction – manufactured from quality materials to withstand underhood heat and vibration
• Trustworthy design – backed by 100 years of automotive aftermarket experience

Rein Automotive OE quality expansion tanks, install, fit and perform the way the original manufacturer intended. These tanks are designed to match or exceed the OE materials used and are produced from virgin plastic with no regrind to prevent cracking from heat cycles and ensure the plastic is durable and will have a long service life.

Product Features:

• Produced from virgin plastic meeting/exceeding OE specifications and ensuring long life
• Resistant to cracking and wear from heat cycles preventing coolant loss
• Direct fitment allows easy installation
• Manufactured to strict engineering standards/specifications in materials and tolerances

Please note: Advance Auto Parts is proud to carry comparable exact-fit parts from multiple vendors, as such, the item you receive may be one of two quality brands. Both brands meet the same fitment requirements and are equal in their performance and specifications. The fan clutch is the component of the cooling system that varies the fan speed to meet the cooling needs of the engine. The fan clutch provides high airflow volume and, by only operating the fan as needed, promotes good fuel economy. CARQUEST fan clutches are designed to meet OE performance specifications.

Product Features:

• CARQUEST Premium Fan Clutch
• 5″ thermal import/compact
• Designed, tested and built by application
• OE performance, fit and appearance

Product Features:

• Designed, tested, and built by application
• OE performance, fit, and appearance
• Precision machined
• Out of box installation

Product Features:

• Designed, tested, and built by application
• OE performance, fit, and appearance
• Precision machined
• Out of box installation

Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:

• Thermal tested under real-life temperature simulations
• High tensile strength aluminum for maximum crimp strength
• Plastic tanks are engineered with integrated ribbing for added strength to withstand cracks, bowing and distortion during thermal cycles
• Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
• Oil cooler designs meet or exceed OE standards, keeping the vehicle’s engine and transmission performing at optimal conditions
• OEM grade, premium fittings for transmission or engine oil coolers (where applicable)

Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:

• Thermal tested under real-life temperature simulations
• High tensile strength aluminum for maximum crimp strength
• Plastic tanks are engineered with integrated ribbing for added strength to withstand cracks, bowing and distortion during thermal cycles
• Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
• Oil cooler designs meet or exceed OE standards, keeping the vehicle’s engine and transmission performing at optimal conditions
• OEM grade, premium fittings for transmission or engine oil coolers (where applicable)

Reservoir Cap

Rein Automotive OE quality caps fit european vehicles the way the original manufacturer intended. Designed to be direct replacement for the OE cap. Rein caps are designed to match or exceed the OE materials used and are produced to the highest standards to ensure long service life.

Product Features:

• Prevents moisture and debris from entering and contaminating the system
• Direct fit
• Manufactured to strict engineering standards/specifications in materials and tolerances
• Produced by an original equipment supplier

Coolant Level Sensor

Coolant Level Sensor

Water Pump Gasket

Water Pump Gasket

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design
• Manufactured for the sealing repair environment
• Validated for fit, form, and function
• Quality that you can trust