2008 Dodge Dakota Performance and Racing Products
More 2008 Dodge Dakota Performance and Racing Products Categories
If you’re looking for an original Performance and Racing Products replacement for a 2008 Dodge Dakota, you can search through our selection below. You’ll also find aftermarket and OEM Performance and Racing Products to meet your needs.
Essential 2008 Dodge Dakota Performance and Racing Products
K&N – Cold Air Intake: Adds Up To 9 Horsepower, With Million Mile Air Filter (Part No.57-1558)
from
$349.99
K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.
Product Features:
See More
Product Features:
- GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
- IMPROVED ENGINE SOUND: Hear the power under the hood.
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
- DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
- HIGH QUALITY: Made in America.
K&N – Cold Air Intake: Adds Up To 12 Horsepower, With Million Mile Air Filter (Part No.57-1517-2)
from
$399.99
K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.
Product Features:
See More
Product Features:
- GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
- IMPROVED ENGINE SOUND: Hear the power under the hood.
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
- DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
- HIGH QUALITY: Made in America.
Spectre – Spectre Replacement Air Filter (Part No.HPR3901)
from
$49.99
This Spectre OEM replacement air filter is an easy to install performance option for the stock panel shaped air filter in multiple Dodge, Jeep & Mitsubishi applications. With its performance synthetic air filter media, this air filter has been designed to add horsepower and quicker acceleration by allowing more air flow into your engine than ordinary paper filters. This air filter’s sealing edge was engineered to insure a proper air box seal and great engine protection.
Product Features:
See More
Product Features:
- Replaces the factory air filter
- Fits perfectly in your stock air box
- Engineered for increased flow and greater performance
- Fits select Jeep, Dodge, & Mitsubishi models
- Factory pre-oiled and ready to use
- Simple installation
K&N – Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration (Part No.E-1100)
from
$102.99
K&N performance High-Flow Air Filters are engineered to improve engine performance. Unlike disposable paper filters which must be frequently replaced, K&N Air Filters are washable, reusable, and engineered to last for the life of your vehicle or outdoor power small engine. Engineered to fit easily into your factory air box, installation can be completed in a matter of minutes! K&N develops and tests each product on the world┐s toughest race tracks, so we can bring the highest level of performance to your daily driving. Join the millions of customers who have saved money and improved vehicle performance by upgrading to K&N filtration.
Product Features:
See More
Product Features:
- ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
- RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
- 4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
- CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (based on the average miles driven per year of 15,000 miles)
- ULTIMATE LONGEVITY: No-hassle lifetime warranty on stock replacement K&N air filters- limitations apply
- EASY INSTALLATION: K&N Air Filters are pre-treated and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
- ECO-FRIENDLY: Using a washable, reusable engine air filter helps reduce replacement air filter waste- a K&N air filter is designed to last longer than 10 or more disposable filters
- MADE IN USA: K&N Air Filters are proudly made in the USA for trusted quality & reliability
Accel – Handheld Computer Programmer for Enhanced Performance and Tuning Control (Part No.49505)
from
$390.99
Revolutionary handheld tuner quickly and easily reprograms your vehicle for more power across the entire rpm range! 50 State Legal!
Product Features:
See More
Product Features:
- Average gains in excess of 30 HP/40 ft.-lbs. for gas and 80 HP/150 ft.-lbs. diesel*
- HD 2.8¿ color screen with updated interface for easier and faster modifications
- HD 2.8┐ color screen with updated interface for easier and faster modifications
- Increased memory and faster processor for improved tuning plus faster updating
- Active fuel management control*
- Performance test (0-60, ╝ mile testing)
- Performance test (0-60, ¼ mile testing)
- Internet updating using PC software
- Tire size adjustment
- Axle gear ratio adjustment
- Shift point and firmness adjustment*
- Speed and rev limiter adjustments*
- Carb EO # D-745
- Diagnostic capability ¿ read and clear trouble codes with explanation of codes
- Diagnostic capability ┐ read and clear trouble codes with explanation of codes
Dynomax – 55255 Exhaust Intermediate Pipe (Part No.55255)
from
$66.99
Made from quality materials for durability, DynoMax® pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- IMPROVED FLOW CAPACITY — Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
- DESIGNED TO PERFORM — Fixture checked to ensure a precise fit for quick and easy installation
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from aluminized steel for durability and long life
- BETTER TOGETHER — Use premium DynoMax® accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
Dynomax – 45293 Exhaust Tail Pipe (Part No.45293)
from
$75.99
Made from quality materials for durability, DynoMax® pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- IMPROVED FLOW CAPACITY — Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
- DESIGNED TO PERFORM — Fixture checked to ensure a precise fit for quick and easy installation
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from aluminized steel for durability and long life
- BETTER TOGETHER — Use premium DynoMax® accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
K&N – Cold Air Intake: Adds Up To 7 Horsepower, With Million Mile Air Filter (Part No.77-1546KP)
from
$399.99
K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.
Product Features:
See More
Product Features:
- GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
- IMPROVED ENGINE SOUND: Hear the power under the hood.
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
- DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
- HIGH QUALITY: Made in America.
K&N – Cold Air Intake: Adds Up To 8 Horsepower, With Million Mile Air Filter (Part No.77-1516KP)
from
$399.99
K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.
Product Features:
See More
Product Features:
- GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
- IMPROVED ENGINE SOUND: Hear the power under the hood.
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
- DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
- HIGH QUALITY: Made in America.
Dynomax – Ultra Flo Muffler: Universal Fit, Stainless Steel, 16" L, 3" In, 3" Out, Round (Part No.17296)
from
$119.99
DynoMax Ultra Flo SS Polished performance mufflers are constructed of stainless steel for lifelong durability and completely polished for show-quality shine. The unrestricted, straight-through design is dyno proven to flow up to 2,000 SCFM and support up to 1,900 horsepower. Each muffler uses our exclusive Continuous Roving Fiberglass (CRF) Technology to absorb unwanted interior resonance while maintaining a deep performance tone.
Product Features:
See More
Product Features:
- Stainless steel construction for lifelong protection
- Polished finish for a show quality shine
- Dyno proven to flow up to 2,000 SCFM and support up to 1,900 horsepower
- Straight through design ensures unrestricted exhaust flow and reduces back pressure
- CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone
Flowmaster Inc. – 50 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Moderate Sound (Part No.842553)
from
$175.99
The three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – Super 44 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.842548)
from
$126.99
Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a rich powerful tone and are the most aggressive, highest performing street muffler we’ve ever built in a four inch case. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – Cat-back System – Single Side Exit – Force II – Mild Sound (Part No.17458)
from
$458.99
For the person who wants a subtle custom appearance with all the benefits that a Flowmaster Cat-back exhaust system provides. S.O.S. (Single out side) systems are the perfect choice. Force II systems deliver a moderate exterior tone and moderate to mild interior tone, and are suited to customers looking for efficiency improvements without a lot of noise. Especially recommended for towing applications. Like all Flowmaster systems, the benefits include improved throttle response, power and mileage. Designed for an easy fit, these systems include all necessary parts and hardware for easy installation.
See More
Flowmaster Inc. – Cat-back System – Single Side Exit – Force II – Mild/Moderate Sound (Part No.17278)
from
$488.99
For the person who wants a subtle custom appearance with all the benefits that a Flowmaster Cat-back exhaust system provides. S.O.S. (Single out side) systems are the perfect choice. Force II systems delivers a moderate exterior tone and moderate to mild interior tone, and are suited to customers looking for efficiency improvements without a lot of noise. Especially recommended for towing applications. Like all Flowmaster systems, the benefits include improved throttle response, power and mileage. Designed for an easy fit, these systems include all necessary parts and hardware for easy installation.
See More
Bully Dog – 50-State Gas Tuner: Boost Performance, Fuel Economy, & Diagnostics (Part No.40410)
from
$469.99
The GT Platinum Gas is four products in one; a vehicle engine tuner, monitor, gauge and diagnostic device all in a single unit. The GT dramatically improves the utility of your vehicle by increasing horsepower, improving fuel economy and providing a comprehensive set of monitoring features and diagnostic functions. This product is incomparable to other tuning products because it has the largest feature set and the widest range of vehicle applications from a single product part number.
Product Features:
See More
Product Features:
- HEADS UP DISPLAY – Monitor over 15 performance parameters at a glance with a dynamic LCD display mounted on a pillar, window, or dash. User set daytime and nighttime driving modes
- MULTIPLE PRELOADED TUNES – Access four preloaded tunes with the touch of a few buttons to maximize performance in any situation.
- CODE CLEARING – Diagnose and clear trouble codes to ensure proper engine operation.
- Reads and Erases Diagnostic Trouble Codes
- Display Over 15 Vehicle Parameters
- Installation Is Easy-10-20 Minutes
- Free Internet Updates And Upgrades
- 30 Day Money Back Guarantee
K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2010)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
Product Features:
See More
Product Features:
- HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
- VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
- PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
- EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
- EASY TO REMOVE: Fast and easy Wrench-Off removal
- HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
- HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
Mr. Gasket – Remote Oil Filter Kit (Part No.7682)
from
$97.99
This kit relocates the oil filter for quick, clean and easy access and increased filtering. It is complete with precision die cast aluminum by-pass, filter brackets and all high pressure connectors.
Product Features:
See More
Product Features:
- Relocate oil filter to an easy access location
K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2004)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.
Product Features:
See More
Product Features:
- HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
- VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
- PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
- EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
- EASY TO REMOVE: Fast and easy Wrench-Off removal
- HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
- HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
Richmond Gear – Differential Ring And Pinion (Part No.69-0220-1)
from
$438.99
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!
Product Features:
See More
Product Features:
- For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
- The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
- Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
- Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
- Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
Richmond Gear – RngPnn (Part No.CR925410)
from
$185.99
RngPnn
Richmond Gear – RngPnn (Part No.CR825355)
from
$185.99
RngPnn
Richmond Gear – RngPnn (Part No.CR825410)
from
$185.99
RngPnn
Dynomax – 36315 Exhaust System Hanger (Part No.36315)
from
$24.99
Designed to be easily installed, the DynoMax® muffler elimination pipe for the Jeep® Wrangler JL improves ground clearance and delivers a deep performance tone.
Product Features:
See More
Product Features:
- COMPATIBILITY — Designed for Jeep Wrangler JL and works with aftermarket suspension systems and frame/body protection accessories
- IMPROVE GROUND CLEARANCE — Engineered to deliver optimal ground clearance and is easy to install
- PERFORMANCE SOUND — Straight through design delivers a deep performance tone
- IMPROVED FLOW CAPACITY — Mandrel bends improve flow capacity over traditional bends
- PREMIUM MATERIALS – Made from T-409 stainless steel for durability and long life
Popular 2008 Dodge Dakota Performance and Racing Products Categories
2008 Dodge Dakota Performance and Racing Products
You count on your 2008 Dodge Dakota to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Performance and Racing Products. With 18 Performance and Racing Products ranging in price from $17.99 to $469.99, you’re sure to find everything you need for your 2008 Dodge Dakota.
Brands matter. If you want to shop a specific Performance and Racing Products brand, we stock 7 different brands like K&N, Flowmaster Inc., and Dynomax. 2008 Dodge Dakota Performance and Racing Products start as low as $17.99!
One of the best ways to find top quality OEM or aftermarket Performance and Racing Products is by asking professionals. Short of that, you can shop with confidence thanks to our 1,746 extensive product reviews on 2008 Dodge Dakota Performance and Racing Products. Some of the top-rated Performance and Racing Products products we carry are 50-State Gas Tuner: Boost Performance, Fuel Economy, & Diagnostics with 3.6 stars and Super 44 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound with 5.0 stars.
Did we mention you can order your Performance and Racing Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Performance and Racing Products inventory for your 2008 Dodge Dakota below to get started!
Top-Rated Performance and Racing Products Brands For Your 2008 Dodge Dakota
Trusted Performance and Racing Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2008 Dodge Dakota running right for years to come. In our inventory you’ll find brands like K&N, Flowmaster Inc., Dynomax, and even more.
Popular Dynomax Performance and Racing Products
You’ll find popular Dynomax brand products across Performance Exhaust Products. All are waiting to get your 2008 Dodge Dakota back on the road. Some of the top-rated Dynomax products in these categories are:
from
$146.99
(5)
Ultra Flo Muffler: Universal Fit Stainless Steel, 24" L, 2.5" In, 2.5" Out, Oval
Performance Exhaust Mufflers
Top-Rated K&N Performance and Racing Products
If K&N are what you’re looking for, our inventory holds plenty. We stock K&N brand Performance and Racing Products for your 2008 Dodge Dakota, and some of our most reviewed K&N parts include:
from
$17.99
(120)
Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine
Performance Oil Filters
from
$17.99
(99)
Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine
Performance Oil Filters
from
$349.99
(1)
Cold Air Intake: Adds Up To 9 Horsepower, With Million Mile Air Filter
Engine Cold Air Intakes
FAQs for 2008 Dodge Dakota Performance and Racing Products
What are the most purchased Performance and Racing Products for the 2008 Dodge Dakota?
Out of 18 Performance and Racing Products for the 2008 Dodge Dakota, the most popular in our inventory are:
from
$99.99
(13)
40 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound
Performance Exhaust Mufflers
What are the top-rated 2008 Dodge Dakota Performance and Racing Products?
Top-rated Performance and Racing Products for your 2008 Dodge Dakota based on customer reviews/ratings are:
from
$469.99
(9)
50-State Gas Tuner: Boost Performance, Fuel Economy, & Diagnostics
“Installed a CAI and exhaust before I bought the Bully Dog. This product made me able to get the full use of the mods.”
from
$126.99
(1)
Super 44 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound
“awesome sound!”
from
$399.99
(1)
Cold Air Intake: Adds Up To 7 Horsepower, With Million Mile Air Filter
“I ‘ve used K&N on my previous 05 dakota 4.7, my 05 Pt dream series cruiser, Ho turbo, and now my 08 Dakota 4.7. It might only add 9.7HP at rear wheels”
