2008 Dodge Challenger Exhaust Parts
Find Your Specific 2008 Dodge Challenger Exhaust Parts
Below you will find various in-demand Dodge Exhaust Parts, components and accessories for your 2008 Challenger. Advance Auto Parts has popular Challenger parts like Exhaust Pipes, Exhaust Manifold and Headers, Exhaust Fittings and more. You’ll also find aftermarket and OEM Exhaust Parts for other Challenger model years including
2015,
2016,
2017,
2018,
2019,
2020,
2021,
2022,
2023 and more. Select a category of 2008 Dodge Challenger Exhaust Parts below and start saving instantly.
Popular 2008 Dodge Challenger Exhaust Parts Categories
Essential Exhaust Parts for 2008 Dodge Challengers
Hooker Headers – LS1 Engine Swap Headers for 66-72 Chevelle, El Camino (Part No.5903-1HKR)
from
$753.99
LS1 full length engine swap header fits 66-72 Chevelle, El Camino, Monte Carlo and Sprint applications. Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.
Product Features:
See More
Product Features:
- High Performance
- Affordable
- Durable 16 Gauge Material
- Welds Easier
- Lasts Longer
- Heat Cured
- High Heat Resistant
JBA Performance – 1 1/2" Header Shorty Stainless Steel (Part No.1920SJS)
from
$752.99
JBA shorty headers are one of the best performance upgrades available for any application. Hot Rodmagazine rated headers as one of the top 10 power parts installed on a vehicle. JBA shorty headers aresignificantly less restrictive than the stock manifol
Product Features:
See More
Product Features:
- JBA Performance Exhaust 1920SJS 1 1/2″ Header Shorty Stainless Steel 05-10 Dodge Magnum/Charger/300/Challenger 3.5L Silver Ceramic
- Mandrel bent stainless steel tube
Dorman – Direct Fit Exhaust Manifold: Without Heat Shield (Part No.674-232)
from
$468.99
This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair.
Product Features:
See More
Product Features:
- Ideal replacement – this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles.
- Reliable construction – durable materials resist warping, cracking and leaking for long-lasting performance.
- Complete repair – includes all necessary gaskets and downpipe hardware
- Trustworthy design – built by industry leader in aftermarket manifolds
Dorman – Help – Exhaust Manifold Hardware Kit (Part No.03309CD)
from
$46.99
This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles.
- Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Help – Exhaust Manifold Hardware Kit – M8-1.25 Stainless Steel (Part No.03413HP)
from
$28.99
This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.
Product Features:
See More
Product Features:
- Upgraded hardware – this set of twelve M8-1.25 x 30mm exhaust manifold mounting bolts are 100 percent stainless steel for superior heat and corrosion resistance.
- Convenient solution – kit contains all the application-specific hardware necessary to install one exhaust manifold
- Matches fit – this hardware matches the fit and function of the factory fasteners, while offering superior durability
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Mr. Gasket – Exhsthdrbolt (Part No.2230G)
from
$47.99
Headlock&trade: Bolts eliminate the need for lock washers, Period. That’s because each Headlock&trade: Bolt features 24 equally-spaced, stainless steel teeth serrations that bite into and hold onto the attaching surface-eliminating the need for lock-washers.
Product Features:
See More
Product Features:
- 12 per Package
- Includes a ball-head/hex-key socket-installation tool that makes it easy to get them started
- 410 stainless steel
- Minimum 180,000 PSI tensile strength
- 24 equally spaced clockwise teeth
Dorman – Help – Exhaust Manifold Mount Hardware Kit Stainless Steel (Part No.03309HP)
from
$55.99
The factory-style fasteners used to secure the exhaust manifold to the cylinder head on certain vehicles are prone to cracking and failure from extreme thermal cycles and corrosion. This convenient Dorman OE FIX hardware kit contains application-specific studs, bolts and nuts made of 100 percent stainless steel that provide superior strength and resistance to corrosion. These fasteners are precision-manufactured to match the fit and function of the original equipment hardware, and help ensure a professional and more durable repair. The kit contains the studs, bolts and nuts required to install one exhaust manifold.
Product Features:
See More
Product Features:
- Upgraded hardware – this set of M8-1.25 x 40mm exhaust manifold mounting studs, bolts and nuts are 100 percent stainless steel for superior heat and corrosion resistance.
- Convenient solution – kit contains all the application-specific hardware necessary to install one exhaust manifold
- Matches fit – this hardware matches the fit and function of the factory fasteners, while offering superior durability
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Help – Exhaust Flange Hardware Kit (Part No.03442)
from
$40.99
This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles
- Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Help – Exhaust Manifold Hardware Kit (Part No.03413)
from
$15.99
Our Exhaust Manifold Hardware Kit comes with the necessary installation components to assist you in replacing your manifold. Save time and energy by having the right hardware on hand when you need it.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles.
- Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Flowmaster Inc. – Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.842448)
from
$126.99
Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a rich powerful tone and are the most aggressive, highest performing street muffler we’ve ever built in a four inch case. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – Delta 40 Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.842543)
from
$154.99
This two chamber design incorporates Flowmaster’s patented Delta Flow technology. The Delta deflectors generate increased scavenging for better performance and reduced interior sound. Milder exterior tone and reduced interior resonance over standard 40 series. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – 40 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound (Part No.42441)
from
$99.99
The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Borla Performance Exhaust – Cat-Back Exhaust System – ATAK (Part No.140628)
from
$1879.99
Borla Performance Industries is the pioneer and leader in the design and manufacture of stainless steel performance exhaust. We began two decades ago as a manufacturer of exhaust systems for such “concours classics” as Rolls-Royce and Ferrari cars and have evolved into the premier manufacturer of today’s performance vehicles for the street, off-road, and racing.Borla is proud to offer a true “Made in the USA” product sold around the world. We are a company of motorheads, and it shows in our products, customer service, and culture. On weekends, the same Borla employees who built your exhaust or helped you with technical support can be found competing at tracks, drag strips, off-road events and car shows. Constructed using T-304 stainless steel for long life and sharp appearance, and features all welded construction for maximum durability. Unlike any other exhaust brand, Borla’systems are designed from scratch on a vehicle-by-vehicle basis. Every car or truck has unique mechanical and acoustical properties, all taken into account as we spend countless hours optimizing muffler body shapes, internal core configurations, flow dynamics,soundand more.
Product Features:
See More
Product Features:
- Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive powerful sound
- Each system is built from premium, high-quality austenitic T-304 stainless steel
- Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer-controlled CNC manufacturing ensures an accurate fit
MagnaFlow – Competition Series Cat-Back Performance Exhaust System (Part No.19209)
from
$1884.99
The MagnaFlow 2015-2016 Dodge Challenger Competition Series Cat-Back Performance Exhaust System 19209 brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we’re so well known for. This exhaust kit is designed to enhance your 5.7L 2015-2016 Dodge Challenger with dyno-proven performance made possible thanks to fast-flowing mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Quad Split Rear exit with 3.5in. Polished Welded-On Double Wall Angle Cut Folded Edge tips featuring a sporty finish. The exhaust system’s cat-back layout replaces your ride’s exhaust system from near the catalytic converter on back. Exhaust system 19209 is engineered to make your vehicle’s engine produce Aggressive exterior and Moderate interior sound levels, befitting its competition-oriented design. 19209’s direct-fit design makes installation a breeze thanks to the use of advanced 3D scanning techniques. This performance exhaust system is made of 100% durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow’s limited lifetime warranty. Please check to ensure compliance with local noise regulations.
Product Features:
See More
Product Features:
- Crafted from 409 stainless steel with all mandrel-bent tubing
- Increased horsepower and torque
- Aggressive exterior sound
JBA Performance – 40-1666 2.5" Stainless Steel Exhaust System 08-14 Dodge Challenger Dual Exhaust 5.7L (Part No.40-1666)
from
$868.99
When it comes to performance exhaust systems, most people are looking for three things: Power, sound,and quality. JBA Exhaust Systems deliver the best of all three, giving it both great looks and performance.One of the first performance upgrades typical
Product Features:
See More
Product Features:
- JBA Performance Exhaust 40-1666 2.5″ Stainless Steel Exhaust System 08-14 Dodge Challenger Dual Exhaust 5.7L
- Large diameter stainless steel mandrel-bent tube
Walker – Exhaust Clamp (Part No.35336)
from
$2.49
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS?–?Made from quality material for durability and long life
- BETTER TOGETHER — Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust Clamp (Part No.35335)
from
$1.99
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS?–?Made from quality material for durability and long life
- BETTER TOGETHER — Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Clamp U-Bolt Bolt Dia 0.375 Length Nut Type Hex Pipe Dia 2.75 (Part No.35793)
from
$2.99
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS?–?Made from quality material for durability and long life
- BETTER TOGETHER — Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Dynomax – 36459 Exhaust Pipe Spout (Part No.36459)
from
$37.99
Customize your exhaust system with a DynoMax stainless steel tip. Made of high-grade 304 polished stainless steel, DynoMax exhaust tips are available in a variety of sizes making it easy to bolt on a custom look.
Product Features:
See More
Product Features:
- CUSTOM LOOK — Enhance your exhaust system with this tip that features an embossed DynoMax logo
- SINGLE-WALL DESIGN — Features one layer of premium 304 polished stainless steel that is slant-cut for a sleek look
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of sizes to work with a wide range of exhaust systems
- EASY TO INSTALL — Clamp-on installation for an easy upgrade
- BETTER TOGETHER — Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
Dynomax – 53716 Exhaust Pipe (Part No.53716)
from
$182.99
Made from quality materials for durability, DynoMax® direct fit X-pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- IMPROVED FLOW CAPACITY — Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
- DESIGNED TO PERFORM — Fixture checked to ensure a precise fit for quick and easy installation
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from stainless steel for durability and long life
- BUILD IT YOURSELF — Design and custom fabricate your own exhaust system with DynoMax® pipe
- BETTER TOGETHER — Use premium DynoMax® accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
MagnaFlow – HM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter (Part No.26204)
from
$577.99
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 26204. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2006-2019 Dodge Charger, 2005-2019 Chrysler 300, and more, this direct-fit catalytic converter also interchanges with OE parts 4578 447AD and 4578 449AC, among others. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
- Simplifies installation with essential gaskets and hardware being included in the box.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
Walker – CalCat Catalytic Converter- CARB Certified, Direct Replacement, No Fabrication Needed (Part No.82885)
from
$1003.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker® CalCat® Direct-Fit Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles and delivers a precise OE-style fit.
Product Features:
See More
Product Features:
- CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state’s aftermarket converter regulations.
- DIRECT-FIT DESIGN — Direct-fit bolt-on replacement solution with OE-style hangers, brackets, routings and heat shields for easy installation that doesn’t require specialized fabrication or welding
- SUPERIOR TECHNOLOGY — Optimal high technology washcoat formulated to deliver superior performance (as compared to EPA-compliant converters)
- CONSISTENT PERFORMANCE — Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
- STRONG AND DURABLE — Features thick OE-style flanges, hangers and brackets for strength and stainless-steel body with aluminized pipe and heat shields for durability
- BUY WITH CONFIDENCE — Backed by Walker’s 50,000-mile/80,000-kilometer emissions and structural integrity warranty
MagnaFlow – OEM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter (Part No.52478)
from
$654.99
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 52478. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2015-2020 Dodge Challenger and 2015-2020 Dodge Charger, this direct-fit catalytic converter also interchanges with OE parts 6828 1724AA and 5181 970AB. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
- Simplifies installation with essential gaskets and hardware being included in the box.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
MagnaFlow – California Grade CARB Compliant Direct-Fit Catalytic Converter (Part No.5561243)
from
$2101.99
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5561243. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 2006-2019 Dodge Charger, 2009-2019 Dodge Challenger, and additional vehicles. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Product Features:
See More
Product Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
- Simplifies installation with essential gaskets and hardware being included in the box.
- Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
Edelbrock – Exhaust Manifold Gasket Set for Chrysler (Part No.7236)
from
$30.99
Product Features:
See More
- Designed To Match Port Openings Of Cylinder Heads
- Excellent Free-Flowing Seal
Felpro – Intake and Exhaust Manifolds Combination Gasket (Part No.MS 9610 B-1)
from
$23.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Premium quality parts
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.7594)
from
$43.99
Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.
Product Features:
See More
Product Features:
- Manufactured from high-temperature steel core/graphite faced exhaust material
- Expanded steel core provides stability and maximum torque retention to eliminate gasket failure
- Graphite impregnated facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head
- Conforms to and seals minor surface irregularities
- Can be trimmed if necessary for modified port applications
- For OE replacement, high performance street, drag race and oval track use
- Anti-Stick Properties
- Easy Removal For Disassembly
Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.5937)
from
$37.69
Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.
Product Features:
See More
Product Features:
- Manufactured from high-temperature steel core/graphite faced exhaust material
- Expanded steel core provides stability and maximum torque retention to eliminate gasket failure
- Graphite impregnated facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head
- Conforms to and seals minor surface irregularities
- Can be trimmed if necessary for modified port applications
- For OE replacement, high performance street, drag race and oval track use
- Anti-Stick Properties
- Easy Removal For Disassembly
Upgrade your 2008 Dodge Challenger with Top-Quality Exhaust Parts
When it comes to maintaining or upgrading your 2008 Dodge Challenger, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Dodge or enhancing its overall performance, Exhaust Parts are key to keeping your Challenger functioning at its best. At Advance Auto Parts, we offer a wide selection of 25 Exhaust Parts for the 2008 Dodge Challenger, designed to meet your needs without breaking the bank.
From
Exhaust Pipe
replacements to
Exhaust Manifold and Headers
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Exhaust Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Exhaust Parts for your 2008 Dodge Challenger at great prices.
Our Exhaust Parts inventory for this model
ranges from just $2.99 to $2,062.99, with
an average price of $548.12.
Our 25 Exhaust Parts in stock come from 8 trusted brands, so you’re sure to find the right part for your 2008 Dodge Challenger without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2008 Dodge Challenger, we stock popular OEM and aftermarket Exhaust Parts from top names
like Dorman Walker, and more.
Dorman Exhaust Parts
start at just $15.99 and boast an impressive 4 stars average rating from customers.
With 47 customer reviews and counting, our 2008 Dodge Challenger Exhaust Parts have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Exhaust Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2008 Dodge Challenger is always ready to roll. We’re committed to providing you with everything you need to keep your Challenger in top shape, all in one place.
Start shopping confidently below for your 2008 Dodge Challenger!
Best-Selling Exhaust Pipes for 2008 Dodge Challengers
Enhance the driving experience in your Dodge with 1 quality Exhaust Pipe components, starting at $37.99.
Dynomax – 36459 Exhaust Pipe Spout (Part No.36459)
from
$37.99
Customize your exhaust system with a DynoMax stainless steel tip. Made of high-grade 304 polished stainless steel, DynoMax exhaust tips are available in a variety of sizes making it easy to bolt on a custom look.
Product Features:
See More
Product Features:
- CUSTOM LOOK — Enhance your exhaust system with this tip that features an embossed DynoMax logo
- SINGLE-WALL DESIGN — Features one layer of premium 304 polished stainless steel that is slant-cut for a sleek look
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of sizes to work with a wide range of exhaust systems
- EASY TO INSTALL — Clamp-on installation for an easy upgrade
- BETTER TOGETHER — Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
Most Popular 2008 Dodge Challenger Exhaust Manifold and Headers
Customize your Dodge with 7 Exhaust Manifold and Headers products
like Exhaust Manifold and Headers and
Exhaust Manifold and Header Hardware, all
priced under $1,280.99.
Dorman – Help – Exhaust Manifold Hardware Kit (Part No.03413B)
from
$17.99
This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles.
- Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
JBA Performance – 08-14 Chllngr 304SS (Part No.36965S)
from
$1280.99
08-14 Chllngr 304SS
JBA Performance – 1 3/4" Header Long Tube Stainless Steel (Part No.6965SJS)
from
$959.99
JBA long tube headers are the number one choice for maximum performance gains and high RPMefficiency. These long tube designs are dyno and race proven to deliver the greatest possible increase inhorsepower and torque throughout the RPM range. All JBA lo
Product Features:
See More
Product Features:
- JBA Performance Exhaust 6965SJS 1 3/4″ Header Long Tube Stainless Steel 08-14 Challenger 5.7/6.1/6.4L 06-14 Charger/300C/Magnum 5.7/6.1/6.4L Silver Ceramic
- 3/8″ thick CNC laser-cut flanges
JBA Performance – 1 3/4" Header Long Tube Stainless Steel (Part No.6965SJT)
from
$957.99
JBA long tube headers are the number one choice for maximum performance gains and high RPMefficiency. These long tube designs are dyno and race proven to deliver the greatest possible increase inhorsepower and torque throughout the RPM range. All JBA lo
Product Features:
See More
Product Features:
- JBA Performance Exhaust 6965SJT 1 3/4″ Header Long Tube Stainless Steel 08-14 Challenger 5.7/6.1/6.4L 06-14 Charger/300C/Magnum 5.7/6.1/6.4L Titanium Ceramic
- 3/8″ thick CNC laser-cut flanges
JBA Performance – 1 3/4" Header Long Tube Stainless Steel (Part No.6965S)
from
$859.99
JBA long tube headers are the number one choice for maximum performance gains and high RPMefficiency. These long tube designs are dyno and race proven to deliver the greatest possible increase inhorsepower and torque throughout the RPM range. All JBA lo
Product Features:
See More
Product Features:
- JBA Performance Exhaust 6965S 1 3/4″ Header Long Tube Stainless Steel 08-14 Challenger 5.7/6.1/6.4L 06-14 Charger/300C/Magnum 5.7/6.1/6.4L
- 3/8″ thick CNC laser-cut flanges
JBA Performance – 5-14 6.1/6.4 Ddg Sil (Part No.1965SJS)
from
$794.99
5-14 6.1/6.4 Ddg Sil
Dorman – Help – Exhaust Manifold Hardware Kit – M8-1.25 Stainless Steel (Part No.03413HP)
from
$28.99
This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.
Product Features:
See More
Product Features:
- Upgraded hardware – this set of twelve M8-1.25 x 30mm exhaust manifold mounting bolts are 100 percent stainless steel for superior heat and corrosion resistance.
- Convenient solution – kit contains all the application-specific hardware necessary to install one exhaust manifold
- Matches fit – this hardware matches the fit and function of the factory fasteners, while offering superior durability
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Top Picks for 2008 Dodge Challenger Exhaust Fittings
Upgrade Dodge Challengers with top-quality Exhaust Fittings parts, including 2 OEM and aftermarket selections for your 2008 model.
Walker – Clamp U-Bolt Bolt Dia 0.375 Length Nut Type Hex Pipe Dia 2.75 (Part No.35793)
from
$2.99
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS?–?Made from quality material for durability and long life
- BETTER TOGETHER — Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust Clamp (Part No.36522)
from
$26.99
Complete your exhaust repair with a Walker MEGA preformed band clamp. Designed to ensure a tight connection and inhibit leaks, Walker hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- SUPERIOR SEAL — Provides superior 360░ clamping and sealing on muffler inlets, outlets, elbow joints and pipe
- SUPERIOR SEAL — Provides superior 360° clamping and sealing on muffler inlets, outlets, elbow joints and pipe
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for your vehicle repair needs
- PREMIUM MATERIALS?–?Made from a variety of materials including low-carbon steel or stainless steel for durability and long life
- BETTER TOGETHER — Use Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
In-Demand Exhaust Mufflers for 2008 Dodge Challengers
Select from 5 premium Exhaust Mufflers parts for your 2008 Dodge Challenger, with prices ranging from $123.99 to $216.99.
Flowmaster Inc. – 40 Series Muffler, 3in Offset Inlet 3in Offset Outlet, 13in long, Non-Reversible, Aggressive Sound (Part No.8043043)
from
$123.99
The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – 40 Series Muffler, 3in Offset Inlet 3in Offset Outlet, 13in long, Non-Reversible, Aggressive Sound (Part No.943043)
from
$133.99
This two chamber design incorporates Flowmaster’s patented Delta Flow technology. The Delta deflectors generate increased scavenging for better performance and reduced interior sound. Milder exterior tone and reduced interior resonance over Original 40 series. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – Pro Series Muffler, 3in Center Inlet 3in Center Outlet, 12in long, Non-Reversible, Moderate Sound (Part No.13012100)
from
$216.99
The Pro Series mufflers work on all applications ranging from street trucks, diesel pullers and RV pushers to every class of racing on dirt or asphalt. During development, at the dyno and track, the Pro Series mufflers consistently delivered performance that is equal to or surpasses open pipe systems, while dramatically reducing sound levels across the RPM range.
See More
Flowmaster Inc. – 50 Series Muffler, 3in Offset Inlet 3in Offset Outlet, 17in long, Non-Reversible, Moderate Sound (Part No.943053)
from
$154.99
The three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – Super 40 Series Muffler, 3in Offset Inlet 3in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.853048)
from
$154.99
The Super 40 features Flowmaster’s Delta Flow technology. It’s larger case profile provides the best of both worlds of performance and sound. The Super 40 has that deep powerful sound of the Original 40 series but with all the benefits of performance and low interior resonance from the Delta Flow technology. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
Product Features:
See More
Product Features:
- Durable fully welded 409 stainless steel
- Deep aggressive exhaust note
- Noticeable interior resonance
- Excellent performance on high horsepower vehicles
- No internal packing to blowout
Most Sold 2008 Dodge Challenger Catalytic Converters
Explore our best-selling Dodge parts for the 2008 Challenger among 6 OEM and aftermarket options starting from $194.99.
MagnaFlow – OEM Grade Federal / EPA Compliant Universal Catalytic Converter (Part No.51356)
from
$202.99
MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51356 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
- Compact, lightweight construction enables installation in confined areas, welding is required.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
Walker – CalCat CARB Universal Catalytic Converter 3" Inlet (ID) 2.5" Outlet (ID) (Part No.84510)
from
$1777.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat Universal Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles.
Product Features:
See More
Product Features:
- CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state¿s aftermarket converter regulations.
- CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state┐s aftermarket converter regulations.
- SUPERIOR TECHNOLOGY — Optimal high technology washcoat formulated to deliver superior performance (as compared to EPA-compliant converters)
- CONSISTENT PERFORMANCE — Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
- DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
- FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
MagnaFlow – OEM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter (Part No.21-577)
from
$552.99
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 21-577. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2008-2014 Dodge Challenger, 2006-2014 Dodge Charger, and more, this direct-fit catalytic converter also interchanges with OE parts 5039 056AG and 5039 056AA, among others. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
- Simplifies installation with essential gaskets and hardware being included in the box.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
Walker – Ultra EPA Direct Fit Catalytic Converter (Part No.54980)
from
$547.65
Designed to comply with EPA standards while delivering premium performance with assured compliance, Walker« Ultra« Direct-Fit Catalytic Converters provide premium performance and are available for import and domestic OBDII (1996 and newer) vehicles.
Product Features:
See More
Product Features:
- EPA COMPLIANT — For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
- DIRECT-FIT DESIGNá–áDirect-fit bolt-on replacement solution with OE-style hangers, brackets, routings and heat shields for easy installationáthatádoesn┐t require specialized fabricationáand/or welding
- KEEPS CHECK ENGINE LIGHT OFFáFOR EMISSIONS CODESá–áOE-style high-technologyáwashcoatáand optimaláprecious metal load delivers required reduction in tailpipe emissionsáto match vehicle application
- STRONGáANDáDURABLEá–áFeatures thick OE-style flanges, hangersáandábrackets for strength andádurability
- APPLICATION-ENGINEERED –áFeatures aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
Walker – CATALYTIC CONVERTER (Part No.54979)
from
$547.02
CATALYTIC CONVERTER
MagnaFlow – OEM Grade Federal / EPA Compliant Universal Catalytic Converter (Part No.51209)
from
$194.99
MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51209 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
- Compact, lightweight construction enables installation in confined areas, welding is required.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
Top-Rated Exhaust Parts Brands For Your 2008 Dodge Challenger
Shop for the best-rated brands offering Exhaust Parts and other products for your 2008 Dodge Challengers. Below you’ll find some of our best rated Exhaust Parts from Dorman and Walker, and more. Exhaust Parts from these brands that fit a 2008 Challenger start at just $2.99 and are rated as high as 4 stars. OEM and aftermarket Exhaust Parts don’t get more top quality, durable, and affordable than from the brands below.
Popular Dorman 2008 Dodge Challenger Exhaust Parts
When it comes to maintaining or upgrading your 2008 Dodge Challenger, using quality Exhaust Parts is essential to ensure durability and a perfect fit. Dorman ticks all of those boxes. We offer a wide selection of Dorman Exhaust Parts, specifically designed for the 2008 Dodge Challenger. With over 3 Dorman brand Exhaust Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $15.99, with an average price of just $20.99. Plus, with over 37 customer reviews and an average rating of 4 stars, you can trust that our Dorman Exhaust Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$15.99
$15.99
(20)
“Life saver for sure . Cheap and definitely better quality than factory in my opinion . I had 2 originals break off when attempting a manifold gasket r”
Popular Walker 2008 Dodge Challenger Exhaust Parts
Walker auto parts is one of the highest quality Exhaust Part brands in the market. Any 2008 Dodge Challenger owner should feel confident when installing genuine Walker parts in their vehicle. To ensure the best fit and performance for your 2008 Challenger, Advance Auto Parts carries a full inventory of 5 Walker Exhaust Parts. Plus you will be keeping your Dodge in peak condition while saving money because prices on these Walker Exhaust Parts range from $2.99 to $1,777.99, plus, with more than 10 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Exhaust Parts below will deliver on both quality and value.
from
$1777.99
$1777.99
This product is not rated
CalCat CARB Universal Catalytic Converter 3" Inlet (ID) 2.5" Outlet (ID)
“”
FAQs for 2008 Dodge Challenger Exhaust Parts
Which Exhaust Parts are best-sellers for 2008 Dodge Challengers?
Out of 25 Exhaust Parts that fit 2008 Dodge Challengers, the following parts are the top sellers:
- 40 Series Muffler, 3in Offset Inlet 3in Offset Outlet, 13in long, Non-Reversible, Aggressive Sound (10194404) – $123.99
- OEM Grade Federal / EPA Compliant Universal Catalytic Converter (10605730) – $202.99
- Exhaust Manifold Gasket Set (20780476) – $26.49
What’s the price range for 2008 Dodge Challenger Exhaust Parts?
Exhaust Part prices for the 2008 Dodge Challenger start at $2.99 and go up to $2,062.99 for the most premium parts.
What’s the average price of a Exhaust Part for a 2008 Dodge Challenger?
The average price for Exhaust Parts for the 2008 Dodge Challenger is $548.12. Keep in mind the variety of part types within our Exhaust Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Exhaust Parts for other Dodge Challenger model years?
What are the cheapest Exhaust Parts for my 2008 Dodge Challenger?
The cheapest 2008 Dodge Challenger Exhaust Parts we carry in stock are:
- Clamp U-Bolt Bolt Dia 0.375 Length Nut Type Hex Pipe Dia 2.75 (26010018) – $2.99
- Exhaust Manifold Hardware Kit (10840978) – $15.99
- Exhaust Manifold Hardware Kit (10214558) – $17.99
- Exhaust Manifold Gasket Set (20780476) – $26.49
- Exhaust Clamp (10647895) – $26.99
What are the top-rated Exhaust Parts that fit the 2008 Dodge Challenger?
Out of 47 reviews by customers, our 2008 Dodge Challenger Exhaust Parts have an average customer rating of . These are some of the highest-rated Exhaust Part types for the 2008 Dodge Challenger and their top-rated products:
- Exhaust Fittings
- Exhaust Clamp (10647895) – $26.99
- Clamp U-Bolt Bolt Dia 0.375 Length Nut Type Hex Pipe Dia 2.75 (26010018) – $2.99
What types of Exhaust Parts do you sell for my 2008 Dodge Challenger?
As of 2/5/25, these are some of the most in-demand types of Exhaust Parts for a 2008 Dodge Challenger:
Can I get help with 2008 Dodge Challenger Exhaust Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Dodge Exhaust Parts and more.
What is your return policy for Dodge Challenger Exhaust Parts?
Advance Auto Parts keeps returns simple. For new Dodge Challenger Exhaust Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
