2008 Chrysler Aspen Transmission Parts

Below you will find various in-demand Chrysler Transmission Parts, components and accessories for your 2008 Aspen. Advance Auto Parts has popular Aspen parts like Transmission Bearings, Automatic Transmission Parts, Transmission Mounts and more. You’ll also find aftermarket and OEM Transmission Parts for other Aspen model years including 2007 2009 and more. Select a category of 2008 Chrysler Aspen Transmission Parts below and start saving instantly.

Popular 2008 Chrysler Aspen Transmission Parts Categories

Transmission Torque Converters

OE Transmission Coolers

Transmission Solenoids

Transmission Oil Cooler Lines

Manual Transmission Output Shaft Bearings

Transmission Pan Gaskets

Automatic Transmission Line Connectors

Pinion Bearings

Transmission Mounts

Transmission Oil Pans

Transmission Master Repair Kits

Transmission Oil Pressure Switches

Transmission Oil Pan Gaskets

Speed Sensors

Automatic Transmission Differential Bearings

Transmission Speed Sensors

Automatic Transmission Oil Pump Seals

Pinion Seals

Automatic Transmission Oil Cooler Assemblies

Extension Housing Seals

Manual Transmission Output Shaft Seals

Shaft Seals

Input Shaft Bearings

Automatic Transmission Output Shaft Bearings

Remanufactured Automatic Transmissions

Drive Sprocket Bearings

Manual Transmission Bearing

Automatic Transmission Accumulator Piston

Essential Transmission Parts for 2008 Chrysler Aspens

from

$23.79

With advanced load-carrying capacity and compact design, tapered roller bearings are used in wheel bearings, transmissions, differentials, transfer cases and other miscellanous applications. FAG manufacturers over 100 million tapered roller bearings annually.

Product Features:

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$197.99

Remanufactured using industry-leading techniques to assure enhanced torque performance and extended life. Each unit is harmonically balanced and leak tested with any inherent OE weaknesses corrected. Pro-King torque converters are subject to random ISO 9001 quality tests before leaving the factory.

Product Features:

Fluid Balanced

from

$56.99

New Platinum Pro Automatic Transmission Oil Cooler Assembly, With Max Cooling

Product Features:

With Max Cooling
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$72.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.

from

$49.49

Product Features:

BUILT TO LAST: Advanced heat treatment process for strength
PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$26.99

Made of quality materials, this automatic transmission oil cooler line connector matches the fit and function of a damaged original equipment connector to restore leak-free performance between the transmission and the oil cooler.

Product Features:

Quality replacement – this transmission cooler connector matches the fit and function of the original equipment connector
Durable construction – this oil cooler line connector is made of quality materials for a precise fit and leak-free durability
Performance tested – this connector has been rigorously pressure tested to ensure reliable performance
Ideal shop supply – this connector is recommended to have on hand any time service is being performed on the transmission oil cooler line

from

$10.29

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$18.79

Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$4.99

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

Manufactured From High Quality Material
Engineered To The Specifications
Meets The Quality Standards
Designed For Performance And Durability
Easy To Install

from

$22.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$197.99

This automatic transmission oil cooler is designed to match the function of an original cooler on specified vehicles. It is engineered to help maintain proper engine oil temperature when an original cooler has failed from heat, corrosion, or damage.

Product Features:

Direct replacement – this automatic transmission fluid cooler is designed to match the function of an original cooler on specified vehicle
Ideal solution – engineered to help maintain proper transmission fluid temperature when an original cooler has failed from heat, corrosion or damage
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$4.99

Design type: spring loaded; multi-lip
Temperature range: -30 Deg. F to 325 Deg. F / -34 Deg. C to 163 Deg. C
Superior thermal and chemical resistance
Good abrasion and dry running capability
Delivers quality and reliable performance for every type of repair

from

$10.99

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$14.99

Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$23.99

Manufactured with premium-grade steel, National taper bearing cones feature crowned raceways and rollers to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$35.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to CHRY 07-09; DODGE 02-09;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2002-2009
Weight approx: 4 Lbs

from

$106.99

Building upon a foundation of premium full-line products established under NGK ignition and oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. is the only OE supplier with a full line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

The Automatic Transmission Oil Pressure Sensor reports transmission line pressure, senses if there is insufficient oil, and provides inputs to determine the useful life of the oil.
NTK’s Automatic Transmission Oil Pressure Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper monitoring of the transmission’s oil pressure.

from

$7.99

Product Features:

Brand may vary by location

from

$2474.99

At Shift Pro Inc, fully remanufactured transmissions go beyond the name. So, what’s in that name to start? Pro Engineering: your transmission has been re-engineered to meet or exceed OE standards for tolerances, durability, and quality. Pro Performance: upgraded components and a fully remanufactured torque converter add to enhanced durability over your transmission’s lifetime. Pro Performance: hot-, cold-, load-, and simulated road-tested on custom dynamometers, your transmission is ready to go, wherever you’re headed.

Product Features:

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$10.99

AT OIL PAN GASKET

from

$465.99

This automatic transmission control solenoid is designed to match the fit and function of the original solenoid on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this automatic transmission control solenoid is designed to match the fit and function of the original solenoid on specified vehicles
Ideal solution – this solenoid is a reliable replacement for an original part that is damaged or has failed due to fatigue, excessive heat or electrical current
Durable construction – this solenoid is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$646.99

AT MASTER REPAIR KIT

from

$17.79

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$52.99

Vehicle Speed Sensor

from

$54.99

On certain Chrysler, Dodge, Jeep and Ram SUVs and trucks, routine transmission services are a messy process due to the design of the original equipment transmission pan, which must be lowered carefully to avoid spilling the fluid it holds. This Dorman OE FIX transmission pan is designed with a drain plug to make draining the fluid a less precarious prospect. Our rugged, precision-engineered replacement pan includes a new drain plug and crush washer to ensure a predictable and straightforward initial installation. Replacing the factory pan with this innovative solution encourages regular service to help prevent costly transmission repair, and can help protect the transmission from harmful contaminants and fluid leaks. Best of all? Future service is a lot less messy.

Product Features:

Improved design – this transmission pan is designed to match the fit and performance of the original and eliminate the messy task of draining the pan
Complete solution – includes transmission pan, drain plug and gasket
Ideal replacement – manufactured to exacting specifications and designed to match the fit and function of the original part for a trouble-free installation and dependable performance
Trustworthy quality – designed in the United States and backed by more than a century of automotive aftermarket experience

from

$68.99

This replacement transmission oil pan is a direct replacement for a damaged original equipment transmission pan. Made of quality materials, it’s designed for reliable, leak-free service.

Product Features:

Ideal replacement – this transmission oil pan matches the fit and function of the original pan for a trouble-free replacement
Durable construction – this transmission oil pan is made of quality materials for durability and leak-free performance
Cost-effective solution – offers original equipment performance at competitive price
Quality tested – this part has undergone try-on testing to ensure a quality fit

from

$20.99

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$90.99

This automatic transmission oil cooler hose assembly is designed to match the fit and function of an original assembly. It is engineered from durable components as a reliable replacement for leaking or damaged lines on specified vehicles.

Product Features:

Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years
Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage
Durable construction – made of quality materials for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

Upgrade your 2008 Chrysler Aspen with Top-Quality Transmission Parts

When it comes to maintaining or upgrading your 2008 Chrysler Aspen, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chrysler or enhancing its overall performance, Transmission Parts are key to keeping your Aspen functioning at its best. At Advance Auto Parts, we offer a wide selection of 63 Transmission Parts for the 2008 Chrysler Aspen, designed to meet your needs without breaking the bank. From Transmission Bearing replacements to Automatic Transmission Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Transmission Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Transmission Parts for your 2008 Chrysler Aspen at great prices. Our Transmission Parts inventory for this model ranges from just $4.99 to $2,549.99, with an average price of $261.61. Our 63 Transmission Parts in stock come from 18 trusted brands, so you’re sure to find the right part for your 2008 Chrysler Aspen without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2008 Chrysler Aspen, we stock popular OEM and aftermarket Transmission Parts from top names like National, DriveWorks, Imperial, and more. National Transmission Parts start at just $14.99 and boast an impressive 4.3 stars average rating from customers. DriveWorks and Imperial also bring quality to the table, with Transmission Parts available starting at $10.99, and at an average 4.3 stars rating. With 654 customer reviews and counting, our 2008 Chrysler Aspen Transmission Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Transmission Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2008 Chrysler Aspen is always ready to roll. We’re committed to providing you with everything you need to keep your Aspen in top shape, all in one place. Start shopping confidently below for your 2008 Chrysler Aspen!

Best-Selling Transmission Bearings for 2008 Chrysler Aspens

Enhance the driving experience in your Chrysler with 13 quality Transmission Bearing components, starting at $7.99.

show more show less

from

$14.99

Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$15.29

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

PREMIUM MATERIALS — Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION — Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN — Engineered to meet OE specifications
COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$23.99

Manufactured with premium-grade steel, National taper bearing cones feature crowned raceways and rollers to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$16.49

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$25.49

Manufactured with premium-grade steel, National taper bearing cones feature crowned raceways and rollers to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$32.49

Manufactured with premium-grade steel, National taper bearing cones feature crowned raceways and rollers to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$8.79

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$13.29

Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$18.79

Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$7.99

Product Features:

Brand may vary by location

from

$49.49

Product Features:

BUILT TO LAST: Advanced heat treatment process for strength
PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$34.49

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$23.79

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

Most Popular 2008 Chrysler Aspen Automatic Transmission Parts

Customize your Chrysler with 8 Automatic Transmission Parts products like Transmission Solenoids, Remanufactured Automatic Transmissions, and Automatic Transmission Accumulator Piston, all priced under $2,549.99.

show more show less

from

$476.99

An automatic transmission is a hydraulic multi-speed device that does not require any input from the vehicle operator other than selecting vehicle direction. Hydraulic pressure is controlled by a series of electronic shift solenoids that are commanded by the transmission control module. Planetary gear sets and hydraulically controlled shift plates and brake bands apply power to the main shaft in the transmission and out to the vehicles drive wheels.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Precision-wound coated copper windings increase product durability and life cycle.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure product reliability, every time.

from

$2549.99

All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required. All of friction components are replaced with upgraded heavy duty parts. Drum assemblies are air checked and side play is checked to assure proper clearance. All of seals, o’rings and gaskets are replaced. All of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear. Valve body valves and valve bores are inspected and valve bores are machined as required. Completed valve bodies are tested for proper operation prior to dyno testing. Transmissions are assembled, end plays are set and fasteners are torqued to the required specification. All of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno test. Transmission park locking mechanism is checked during dyno test. (where applicable). (Torque Converter) All of converters are dynamic balanced. All of pumps are furnaced brazed. All new bearings and o’rings. All new springs and rollers in stator. All new thrust washers. All new friction liners in overdrive lockup converters. Converter endplay and hub/pump runout and diameter is checked.

Product Features:

All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required.
100% of friction components are replaced with upgraded heavy duty parts.
Drum assemblies are air checked and side play is checked to assure proper clearance. 100% of seals, o’rings and gaskets are replaced.
100% of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear.
Transmissions are assembled, end plays are set and fasteners are torqued to the required specification.
Torque Converter: 100% of converters are dynamic balanced. 100% of pumps are furnaced brazed. 100% new bearings and o’rings. 100% new springs and rollers in stator. 100% new thrust washers. 100% new friction liners in overdrive lockup converters.
100% of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno

from

$2549.99

All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required.
100% of friction components are replaced with upgraded heavy duty parts.
Drum assemblies are air checked and side play is checked to assure proper clearance. 100% of seals, o’rings and gaskets are replaced.
100% of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear.
Transmissions are assembled, end plays are set and fasteners are torqued to the required specification.
Torque Converter: 100% of converters are dynamic balanced. 100% of pumps are furnaced brazed. 100% new bearings and o’rings. 100% new springs and rollers in stator. 100% new thrust washers. 100% new friction liners in overdrive lockup converters.
100% of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno

from

$2474.99

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$2305.99

While we do not sell this item online, it can be ordered from one of our 3,500 store locations. Please see our Store Locator to find the store nearest you. Please note: Online promotions and discounts are not applicable to this item. Moveras Remanufactured Transmissions manufactures automatic transmissions for virtually every vehicle on the road. We are committed to remanufacturing transmissions to the same standards and methodologies used for OEM transmissions. Each Moveras transmission is produced in a World Class manufacturing facility. Our entire process has been developed from scratch, utilizing LEAN manufacturing principles. Our transmissions are produced in a Clean Room environment. Every transmission is built to the same exacting standards by using a precisely documented and controlled process.

Product Features:

Product might not be available in all states due to local laws.

from

$2257.99

Moveras Remanufactured Transmissions manufactures automatic transmissions for virtually every vehicle on the road.

Product Features:

Product might not be available in all states due to local laws.
We are committed to remanufacturing transmissions to the same stAndards And methodologies used for OEM transmissions
Each Moveras transmission is produced in a World Class manufacturing facility
Our entire process has been developed from scratch, utilizing LEAN manufacturing principles
Our transmissions are produced in a Clean Room environment
Every transmission is built to the same exacting standards by using a precisely documented and controlled process.

from

$465.99

Direct replacement – this automatic transmission control solenoid is designed to match the fit and function of the original solenoid on specified vehicles
Ideal solution – this solenoid is a reliable replacement for an original part that is damaged or has failed due to fatigue, excessive heat or electrical current
Durable construction – this solenoid is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$4.99

Manufactured From High Quality Material
Engineered To The Specifications
Meets The Quality Standards
Designed For Performance And Durability
Easy To Install

Top Picks for 2008 Chrysler Aspen Transmission Mounts

Upgrade Chrysler Aspens with top-quality Transmission Mounts parts, including 1 OEM and aftermarket selections for your 2008 model.

show more show less

from

$35.99

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2002-2009
Weight approx: 4 Lbs

In-Demand Transmission Cooler and Parts for 2008 Chrysler Aspens

Select from 15 premium Transmission Cooler and Parts parts for your 2008 Chrysler Aspen, with prices ranging from $25.99 to $197.99.

show more show less

from

$85.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 10″ x 15-7/8″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$73.99

Product Features:

Imperial Maxi-Cool« plate and fin transmission cooler
Size: 3/4″ x 11″ x 7-1/2″
Mid-size and full-size cars, pickups
GVWR up to 20,000 lbs.; towing up to 2,500 lbs.
Compatible with OEM cooler systems
Made with the highest quality materials
100% pressure testing to 150 PSI for quality assurance
33% more efficient than a comparable tube and fin design

from

$61.99

The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Imperial Rapid-Cool plate and fin transmission cooler
Size: 3/4″ x 11″ x 6″
Sub-compact to compact cars
GVWR up to 18,000 lbs.
Compatible with OEM cooler systems
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$55.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial Econo-Kool tube and fin transmission cooler
Size: 3/4″ x 5″ x 15-7/8″
Compact and mid-size cars
GVWR up to 16,000 lbs.; towing up to 2,500 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$40.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial Econo-Kool tube and fin transmission cooler
Size: 3/4″ x 5″ x 12-1/2″
Sub-compact to compact cars
GVWR up to 12,000 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$80.99

The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Imperial Rapid-Cool plate and fin transmission cooler
Size: 3/4″ x 11″ x 9-1/2″
Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
GVWR up to 24,000 lbs.; towing up to 5,000 lbs.
33% more efficient than a comparable tube and fin design
Compatible with OEM cooler systems
Made with the highest quality materials
100% pressure testing to 150 PSI for quality assurance
33% more efficient than a comparable tube and fin design

from

$52.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Mid-size and full-size cars, pickups
GVWR up to 18,000 lbs.; towing up to 3,500 lbs
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$83.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 7-1/2″ x 15-7/8″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
Up to Class C motorhomes, towing up to 5,000 pounds
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$25.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Transmission cooler reinstallation kit
Contains part numbers 248001, 226201, 240250 and 4 hose clamps
Provides all hardware for reinstallation of Imperial transmission coolers
Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
Made of high grade nylon for easy installation
Removable buttons for cooler/fan relocation
Made for both transmission coolers and electric fan installation
Comes with Quick Connect coupler

from

$90.99

Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years
Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage
Durable construction – made of quality materials for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$97.99

Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years
Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage
Durable construction – made of quality materials for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$67.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 7-1/2″ x 12-1/2″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$197.99

Direct replacement – this automatic transmission fluid cooler is designed to match the function of an original cooler on specified vehicle
Ideal solution – engineered to help maintain proper transmission fluid temperature when an original cooler has failed from heat, corrosion or damage
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$132.99

Direct replacement – this automatic transmission fluid cooler is designed to match the function of an original cooler on specified vehicle
Ideal solution – engineered to help maintain proper transmission fluid temperature when an original cooler has failed from heat, corrosion or damage
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$56.99

New Platinum Pro Automatic Transmission Oil Cooler Assembly, With Max Cooling

Product Features:

With Max Cooling
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

Most Sold 2008 Chrysler Aspen Transmission Seals

Explore our best-selling Chrysler parts for the 2008 Aspen among 12 OEM and aftermarket options starting from $4.99.

show more show less

from

$20.99

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$10.99

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$17.79

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$9.79

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$26.99

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$10.29

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$24.49

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$12.29

All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!

from

$26.99

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$17.29

AT EXT HOUSING SEAL

from

$8.49

Product Features:

Brand may vary by location

from

$4.99

Design type: spring loaded; multi-lip
Temperature range: -30 Deg. F to 325 Deg. F / -34 Deg. C to 163 Deg. C
Superior thermal and chemical resistance
Good abrasion and dry running capability
Delivers quality and reliable performance for every type of repair

Top-Rated Transmission Parts Brands For Your 2008 Chrysler Aspen

Shop for the best-rated brands offering Transmission Parts and other products for your 2008 Chrysler Aspens. Below you’ll find some of our best rated Transmission Parts from National, DriveWorks, and Imperial, and more. Transmission Parts from these brands that fit a 2008 Aspen start at just $10.99 and are rated as high as 4.3 stars. OEM and aftermarket Transmission Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular National 2008 Chrysler Aspen Transmission Parts

When it comes to maintaining or upgrading your 2008 Chrysler Aspen, using quality Transmission Parts is essential to ensure durability and a perfect fit. National ticks all of those boxes. We offer a wide selection of National Transmission Parts, specifically designed for the 2008 Chrysler Aspen. With over 3 National brand Transmission Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $14.99, with an average price of just $17.92. Plus, with over 8 customer reviews and an average rating of 4.3 stars, you can trust that our National Transmission Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $14.99

(3)

Bearing Race

“Used on my diesel truck”

from $20.99

(2)

Multi-Purpose Seal

“Installed in rear differential of my 2004 Jeep Liberty. Perfect fit and no leaks. Easy to install. Thumbs up!”

from $17.79

(3)

Multi Purpose Seal

“Fit perfectly and stopped the leak. For anyone who needs to know, I used this seal for my Tremec TKO 600 transmission. This seal is a direct replaceme”

Popular DriveWorks 2008 Chrysler Aspen Transmission Parts

DriveWorks auto parts is one of the highest quality Transmission Part brands in the market. Any 2008 Chrysler Aspen owner should feel confident when installing genuine DriveWorks parts in their vehicle. To ensure the best fit and performance for your 2008 Aspen, Advance Auto Parts carries a full inventory of 2 DriveWorks Transmission Parts. Plus you will be keeping your Chrysler in peak condition while saving money because prices on these DriveWorks Transmission Parts range from $10.99 to $16.49, plus, with more than 9 customer reviews and an impressive 4.3 stars average rating, you can be confident the Fram Transmission Parts below will deliver on both quality and value.

from $10.99

(8)

Oil Seal

“Nice price 👍 perfect fit 👌”

from $16.49

(1)

Taper Bearing Set

“Good price. See what happens.”

FAQs for 2008 Chrysler Aspen Transmission Parts

Which Transmission Parts are best-sellers for 2008 Chrysler Aspens?

Out of 63 Transmission Parts that fit 2008 Chrysler Aspens, the following parts are the top sellers:

Transmission Pan with Drain Plug (OE Fix) (10647048) – $54.99
Tapered Roller Bearing Cone (5052513) – $23.99
Multi-Purpose Seal (20441866) – $26.99

What’s the price range for 2008 Chrysler Aspen Transmission Parts?

Transmission Part prices for the 2008 Chrysler Aspen start at $4.99 and go up to $2,549.99 for the most premium parts.

What’s the average price of a Transmission Part for a 2008 Chrysler Aspen?

The average price for Transmission Parts for the 2008 Chrysler Aspen is $261.61. Keep in mind the variety of part types within our Transmission Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Transmission Parts for other Chrysler Aspen model years?

Yes, we currently carry Transmission Parts for 1 model years of Chrysler Aspens between 2007 and 2009. Transmission Parts are bought most frequently for the following model years: 2009 and 2007.

What are the cheapest Transmission Parts for my 2008 Chrysler Aspen?

The cheapest 2008 Chrysler Aspen Transmission Parts we carry in stock are:

42Rle/ 54Rfe/ 45Rfe/ 545Rfe/ 65Rfe/ 66Rfe Transmission (50074153) – $4.99
Multi-Purpose Seal (12067632) – $4.99
Tapered Roller Bearing (10659441) – $7.99
Auto Transmission Oil Pump Seal (11468570) – $8.49
Taper Bearing Cone (5052548) – $8.79

What are the top-rated Transmission Parts that fit the 2008 Chrysler Aspen?

Out of 654 reviews by customers, our 2008 Chrysler Aspen Transmission Parts have an average customer rating of . These are some of the highest-rated Transmission Part types for the 2008 Chrysler Aspen and their top-rated products:

Automatic Transmission Pan and Gaskets
- Transmission Oil Pan Gasket 15 Bolt Hole One Piece Gasket (20688584) – $22.99
- Transmission Pan with Drain Plug (OE Fix) (10647048) – $54.99
Transmission Cooler and Parts
- Transmission Oil Pan Gasket 15 Bolt Hole One Piece Gasket (20688584) – $22.99
- Transmission Pan with Drain Plug (OE Fix) (10647048) – $54.99
Transmission Electrical Parts
- Transmission Oil Pan Gasket 15 Bolt Hole One Piece Gasket (20688584) – $22.99
- Transmission Pan with Drain Plug (OE Fix) (10647048) – $54.99

What types of Transmission Parts do you sell for my 2008 Chrysler Aspen?

As of 11/2/25, these are some of the most in-demand types of Transmission Parts for a 2008 Chrysler Aspen:

Can I get help with 2008 Chrysler Aspen Transmission Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chrysler Transmission Parts and more.

What is your return policy for Chrysler Aspen Transmission Parts?

Advance Auto Parts keeps returns simple. For new Chrysler Aspen Transmission Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2008 Chrysler Aspen Transmission Parts

FAG US – Cone (Part No.KLM603049)

Pro-King – Automatic Transmission Remanufactured Torque Converter (Part No.CR2A)

KAI – Trans Oil Cooler Assembly (Part No.CH4050109)

Carquest Premium – Multi-Use Connector (Part No.PTA3037)

National – Multi-Purpose Bearing (Part No.108)

Dorman – Transmission Line Quick Connector (Part No.800-723)

National – Multi-Purpose Seal (Part No.710557)

National – Bearing Race (Part No.M804010)

Crown Auto Jeep Replacmnt – 42Rle/ 54Rfe/ 45Rfe/ 545Rfe/ 65Rfe/ 66Rfe Transmission (Part No.4446544)

Felpro – Transmission Oil Pan Gasket 15 Bolt Hole One Piece Gasket (Part No.TOS 18733)

Dorman – Transmission Oil Cooler (Part No.918-283)

National – Multi-Purpose Seal (Part No.710753)

Driveworks – Oil Seal (Part No.S-7300S)

National – Bearing Race (Part No.M802011)

National – Tapered Roller Bearing Cone (Part No.M802048)

Anchor – Transmission Mount: Rear, 1 Piece (Part No.3066)

NTK – Automatic Transmission Oil Pressure Sensor (Part No.AT0017)

Driveworks – Tapered Roller Bearing (Part No.S-LM-603012)

Shift Pro by ETE – 545RFE Automatic Transmission Assembly (Part No.T151303)

ATP – AT OIL PAN GASKET (Part No.TG-110)

Dorman – Remanufactured Transmission Solenoid Pack (Part No.609-040)

ATP – AT MASTER REPAIR KIT (Part No.TM-60)

National – Multi Purpose Seal (Part No.7300S)

ATP – Vehicle Speed Sensor (Part No.TE-21)

Dorman – Transmission Pan with Drain Plug (OE Fix) (Part No.265-817)

Dorman – Transmission Oil Pan: Direct Fit, Steel, 17.5 Quart (Part No.265-855)

National – Multi-Purpose Seal (Part No.710480)

Dorman – Transmission Oil Cooler Line: Exact Fit, Metal/Rubber (Part No.624-999)

National – Bearing Race (Part No.M802011)

National – Bearing (Part No.M86649)

National – Tapered Roller Bearing Cone (Part No.M802048)

Driveworks – Taper Bearing Set (Part No.S-A-36)

National – Tapered Roller Bearing Cone (Part No.JLM704649)

National – Tapered Roller Bearing Cone (Part No.M804049)

Driveworks – Taper Bearing Cone (Part No.S-M-86649)

National – Bearing Race (Part No.JLM704610)

National – Bearing Race (Part No.M804010)

Driveworks – Tapered Roller Bearing (Part No.S-LM-603012)

National – Multi-Purpose Bearing (Part No.108)

FAG US – Bearing – TRB (Tapered Roller Bearing) (Part No.KT36)

FAG US – Cone (Part No.KLM603049)

Carquest Premium – Automatic Transmission Control Solenoid (Part No.TCE1003)

Premium Drive Train – Premium Remanufactured Automatic Transmission Assembly (Part No.T45RFE4706T4)

Premium Drive Train – Premium Remanufactured Automatic Transmission Assembly (Part No.T45RFE5704T2)

Shift Pro by ETE – 545RFE Automatic Transmission Assembly (Part No.T151303)

Moveras – 545RFE – Automatic Transmission (Part No.M01329)

Moveras – 545RFE – Automatic Transmission (Part No.M01186BB)

Dorman – Remanufactured Transmission Solenoid Pack (Part No.609-040)

Crown Auto Jeep Replacmnt – 42Rle/ 54Rfe/ 45Rfe/ 545Rfe/ 65Rfe/ 66Rfe Transmission (Part No.4446544)

Anchor – Transmission Mount: Rear, 1 Piece (Part No.3066)

Imperial – High Performance Transmission Oil Cooler (Part No.240516)

Imperial – Maxi-Kool® XL Transmission Oil Cooler (Part No.243007)

Imperial – Plate and Fin Style Transmission Cooler, Light Duty, 3/4" x 5-7/8" x 11" (Part No.243006)

Imperial – Econo-Kool Transmission Oil Cooler (Part No.242010)

Imperial – Econo-Kool Transmission Oil Cooler (Part No.242009)

Imperial – Plate and Fin Style Transmission Cooler, Heavy Duty, 3/4" x 9-1/2" x 11" (Part No.243008)

Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242012)

Imperial – High Performance Transmission Oil Cooler (Part No.240514)

Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)

Dorman – Transmission Oil Cooler Line: Exact Fit, Metal/Rubber (Part No.624-999)

Dorman – Transmission Oil Cooler Line: Exact Fit, Metal/Rubber (Part No.624-998)

Imperial – High Performance Transmission Oil Cooler (Part No.240512)

Dorman – Transmission Oil Cooler (Part No.918-283)

Dorman – Transmission Oil Cooler (Part No.918-229)

KAI – Trans Oil Cooler Assembly (Part No.CH4050109)

National – Multi-Purpose Seal (Part No.710480)

Driveworks – Oil Seal (Part No.S-7300S)

National – Multi Purpose Seal (Part No.7300S)

National – Multi-Purpose Seal (Part No.710476)

National – Multi-Purpose Seal (Part No.710481)

National – Multi-Purpose Seal (Part No.710557)

National – Multi-Purpose Seal (Part No.710941)

Motive Gear – Differential Pinion Seal (Part No.8516N)

National – Automatic Transmission Extension Housing Seal (Part No.711099)

ATP – AT EXT HOUSING SEAL (Part No.FO-199)

Driveworks – Auto Transmission Oil Pump Seal (Part No.S-710557)

National – Multi-Purpose Seal (Part No.710753)