2008 Chevrolet Silverado 2500 HD Turbochargers

Turbocharger Kit

Turbocharger Kit

When turbochargers fail, the common response is the replacement of the entire unit. However, the damage is often isolated within the turbo cartridge, which contains the core components of the turbo assembly. By replacing just the cartridge, the remaining components can be salvaged and repair times reduced. CARDONE cartridges are assembled with O.E.-grade components to ensure high performance and durability.

Product Features:

• Eliminates the need to replace the entire turbocharger
• Allows for reuse of the original compressor and turbine housings
• Direct O.E. replacement
• Allows for replacement of turbocharger without the need for balancing
• Supplied with O.E.-grade components for durability

When a turbocharger cartridge fails, the only original equipment solution is to replace the entire turbocharger. This Dorman OE FIX replacement enables direct replacement of the cartridge without paying for an entire new turbocharger.

Product Features:

• Turbocharger Cartridge.
• Turbocharger Cartridge.
• When a turbocharger cartridge fails, the only original equipment solution is to replace the entire turbocharger. This Dorman OE FIX replacement enables direct replacement of the cartridge without paying for an entire new turbocharger.
• Direct replacement – this turbocharger cartridge is made to replace the original equipment cartridge on specific vehicles
• Cost-effective solution – allows repair of only the failed cartridge without needing to replace entire turbocharger

Product Features:

• All wheels, shafts and corresponding bores are measured and controlled with specific go/no-go tolerances and renewed or replaced as needed to ensure trouble-free operation.
• Each unit is 100% disassembled and thoroughly cleaned using proprietary processes and dedicated specialized equipment.
• All components are inspected to exact standards, and renewed as appropriate to ensure that problematic areas that typically cause failure are renewed to the highest quality standards.
• 100% of rotating, journal, and thrust bearings and seals are replaced, and all mating surfaces/passages are renewed as required for a longer-lasting unit.
• Each unit comes with a pre-lube syringe to ensure product protection during installation.
• As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
• Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
• Meets or exceeds O.E. performance.
• Comes with a pre-lube syringe to ensure product protection during installation.

Rotomaster 100% New Turbochargers are available for a vast array of automotive applications to meet the growing demand for maximum vehicle performance with optimal fuel efficiency. Every Rotomaster turbocharger has been designed and tested to guarantee O.E. fit and performance. Rotomaster is committed to getting your vehicle back on the road and back to peak performance with these brand-new, direct-replacement turbochargers.

Product Features:

• 100% dynamic balancing of compressor wheels, turbine shaft/wheel assemblies and complete rotating assembly guarantees proper operation and extends unit life.
• Unit comes with the required gaskets and mounting hardware for easy installation.
• Meets or exceeds O.E. performance.
• Unit comes with a pre-lube syringe to ensure product protection during installation.
• Manufactured with 100% new components and tested to ensure trouble-free operation
• 100% dynamic balancing of compressor wheels, turbine shaft/wheel assemblies and complete rotating assembly guarantees proper operation and extends unit life.
• All units come with the required gaskets and mounting hardware for easy installation.
• Meets or exceeds O.E. performance.
• Comes with a pre-lube syringe to ensure product protection during installation.

Turbocharger

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

• Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

• All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
• MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
• MAHLE gaskets is the leader in Domestic, Asian and European applications
• The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

• Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

The aFe ATLAS turbo down-pipe is engineered to outflow and outperform the restrictive, OE down-pipe on your 2004.5-2010 Chevy Silverado or GMC Sierra 2500HD/3500HD with the Duramax V8 6.6L turbo diesel. The 3″ mandrel bent steel tubing offers smoother transition bends for increased airflow, delivering quicker turbo spool times. CNC machined V-band inlets and outlets ensure an OE-style, 360 degree sealing surface. Coated with a black finish, the ATLAS turbo down-pipe is wrapped with thermal header tape to reduce EGT’s even in the most extreme environments. Flow and Performance: The ATLAS turbo down-pipe is made from 3″ mandrel bent steel tubing offering smoother transition bends for low turbulence to deliver quicker turbo spool times. Perfect Fit: The ATLAS turbo down-pipe is an upgrade to the OE down-pipe and utilizes the factory mounting locations for true bolt-on performance. Leak-Free Seal: High quality OE style CNC machined V-band flanges are used for a complete 360 degree sealing surface. Finish: This down pipe is coated with a black finish and wrapped in thermal header tape for better insulation. This reduces EGT’s and under hood temperatures. Note: This system is not currently CARB exempt or available for sale in California, and cannot be used on any vehicle registered with the California Department of Motor Vehicle. This item in not legal in NY for use on vehicles with CA emissions.

Product Features:

• Mandrel Bent Black Finished Steel For Long Lasting Good Looks
• Replaces OE Down-Pipe For True Bolt-On Performance
• Wrapped in High Temp Thermal Tape For Insulation
• CNC Machined V-Band Inlet/Outlet Flange

If you are looking for a highly engineered down pipe look no further than the aFe Power Mach Force XP Down Pipe. Down pipe is 100 percent TIG welded and uses a stepped design that increases exhaust velocity and eliminates low pressure drops which helps to scavenge the exhaust for increased intake charge and more power. Race proven strength and durability. Designed using a resonance chamber to help reduce the in-cab resonance found with other down pipes. All hardware and brackets are included for a hassle-free installation.

Product Features:

• 3 in. Mandrel Bent Stainless Steel Tubing
• 409 Stainless Steel
• 100% TIG-Welded
• CNC Machined Flanges

The MagnaFlow Turbo Downpipe 15399 is a 4in. diameter mandrel bent stainless steel pipe designed to connect near your turbocharger and i’s weight-optimized with superior flow characteristics and performance. Each performance pipe is produced using precision CNC robotic manufacturing techniques and features 100% durable, corrosion resistant stainless steel construction. Professional installation is highly recommended.

Product Features:

• Mandrel bent tubing
• CNC precision robotic manufacturing techniques
• Durable corrosion-resistant stainless steel construction

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Validated for fit, form, and function
• Engineered for the sealing repair environment
• Unsurpassed quality you can trust

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Validated for fit, form, and function
• Engineered for the sealing repair environment
• Unsurpassed quality you can trust

The aFe Bladerunner Turbo Inlet Manifold increases performance to your Duramax by 23hp and 57lbs x ft. torque while increasing air flow 73-percent over the factory turbo inlet. The Bladerunner turbo inlet manifold also improves turbo spool up times and lowers exhaust gas temperature (EGTs). This unit is constructed out of durable A356-T6 aluminum and uses the patented multi-direction vane (MDV) technology to help guide air through the manifold to your turbo. This kit comes complete with turbo inlet manifold and all hardware needed for an easy installation.

Product Features:

• Reduces Restriction
• Improves MPG
• Lower EGTs
• 73% cfm Flow Increase

The aFe Bladerunner Turbo Inlet Manifold increases performance to your Duramax by 9hp and 23lbs x ft. torque. The Bladerunner turbo inlet manifold also improves turbo spool up times and lowers exhaust gas temperature (EGTs). This unit is constructed out of durable A356-T6 aluminum and uses the patented multi-direction vane (MDV) technology to help guide air through the manifold to your turbo. This kit come complete with turbo inlet manifold, inlet adapter with coupling, CCV tube adapter with coupling and all hardware needed for an easy installation.

Product Features:

• MDV Technology For Maximum Flow
• Cast A356-T6 Aluminum Const.
• 5 Port Pads For Gauges And Other Accessories
• Improves HP/Torque/Boost Pressure/Turbo Spool

GM Genuine Parts Turbocharger Oil Line Gasket are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

• Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
• GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
• GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
• GM regularly updates production and service part designs to integrate new materials and technologies

The ACDelco GM Original Equipment Turbo Oil Line Gasket is a GM-recommended replacement component that provides the same performance, durability, and service life as your factory original equipment.

Product Features:

• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function

The ACDelco GM Original Equipment Turbo Oil Line Gasket is a GM-recommended replacement component that provides the same performance, durability, and service life as your factory original equipment.

Product Features:

• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function

The turbocharger compressor wheel plays an important role in delivering high-pressure air to the intake manifold, resulting in more power. Traditional compressor wheels are made from cast aluminum which results in higher mass and lower fatigue life when compared to the lighter weight, stronger, CARDONE Billet compressor wheel. These billet wheels are well suited for high demand applications including high performance racing applications or high duty cycle applications such as buses or delivery vehicles. CARDONE Billet Compressor Wheels are designed to meet or exceed all O.E. performance standards and fit seamlessly into O.E. covers. Built for strength and tested for endurance, CARDONE Billet Compressor Wheels provide peace of mind for severe-duty demands.

Product Features:

• Product designed and manufactured to accommodate O.E. applications
• Fits into O.E. cover, no modifications needed
• Meets or exceeds O.E. performance
• All products are tested and inspected in an ISO-9001 compliant environment
• Machined from forged billet for strength
• Milled for consistent mass and consistent center of gravity
• Machined with a high degree of precision
• Stronger than OE cast aluminum wheels resulting in higher fatigue life

The turbocharger compressor wheel plays an important role in delivering high-pressure air to the intake manifold, resulting in more power. Traditional compressor wheels are made from cast aluminum which results in higher mass and lower fatigue life when compared to the lighter weight, stronger, CARDONE Billet compressor wheel. These billet wheels are well suited for high demand applications including high performance racing applications or high duty cycle applications such as buses or delivery vehicles. CARDONE Billet Compressor Wheels are designed to meet or exceed all O.E. performance standards and fit seamlessly into O.E. covers. Built for strength and tested for endurance, CARDONE Billet Compressor Wheels provide peace of mind for severe-duty demands.

Product Features:

• Product designed and manufactured to accommodate O.E. applications
• Fits into O.E. cover, no modifications needed
• Meets or exceeds O.E. performance
• All products are tested and inspected in an ISO-9001 compliant environment
• Machined from forged billet for strength
• Milled for consistent mass and consistent center of gravity
• Machined with a high degree of precision
• Stronger than OE cast aluminum wheels resulting in higher fatigue life

The turbocharger compressor wheel plays an important role in delivering high-pressure air to the intake manifold, resulting in more power. Traditional compressor wheels are made from cast aluminum, which results in higher mass and lower fatigue life when compared to the lighter-weight, stronger Rotomaster Billet Compressor Wheel. These billet wheels are well suited for high-demand applications, including performance racing applications or high duty cycle applications, such as buses or delivery vehicles. Rotomaster Billet Compressor Wheels are designed to meet or exceed O.E. performance and fit seamlessly into O.E. covers. Built for strength and tested for endurance, Rotomaster Billet Compressor Wheels provide peace of mind for severe-duty demands.

Product Features:

• Product designed and manufactured to accommodate O.E. applications
• Fits into O.E. cover, no modifications needed
• Meets or exceeds O.E. performance
• All products are tested and inspected in an ISO-9001 compliant environment
• Machined from forged billet for strength
• Milled for consistent mass and consistent center of gravity
• Machined with a high degree of precision
• Stronger than OE cast aluminum wheels resulting in higher fatigue life

The turbocharger compressor wheel plays an important role in delivering high-pressure air to the intake manifold, resulting in more power. Traditional compressor wheels are made from cast aluminum which results in higher mass and lower fatigue life when compared to the lighter weight, stronger, CARDONE Billet compressor wheel. These billet wheels are well suited for high demand applications including high performance racing applications or high duty cycle applications such as buses or delivery vehicles. CARDONE Billet Compressor Wheels are designed to meet or exceed all O.E. performance standards and fit seamlessly into O.E. covers. Built for strength and tested for endurance, CARDONE Billet Compressor Wheels provide peace of mind for severe-duty demands.

Product Features:

• Product designed and manufactured to accommodate O.E. applications
• Fits into O.E. cover, no modifications needed
• Meets or exceeds O.E. performance
• All products are tested and inspected in an ISO-9001 compliant environment
• Machined from forged billet for strength
• Milled for consistent mass and consistent center of gravity
• Machined with a high degree of precision
• Stronger than OE cast aluminum wheels resulting in higher fatigue life

Turbocharger Vane Position Sensor

This turbocharger vane position sensor matches the function of the original equipment sensor to restore the engine management system’s ability to determine the position of the vanes on a variable geometry turbocharger.

Product Features:

• Ideal replacement – this sensor restores the engine management system’s ability to determine the position of the vanes on a variable geometry turbocharger.
• Easy to install – no special tools are required to install this vane position sensor.
• Cost-effective solution – offers original equipment quality at competitive price
• Quality tested – this part has undergone vehicle and inspection testing to ensure reliable performance

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.